The coefficient of variation is a dispersion measurement that does not depend on the unit scales, thus allowing the comparison of experimental results involving different variables. Its calculation is crucial for the adhesive experiments performed in laboratories because both precision and reliability can be verified. The aim of this study was to evaluate and to suggest a classification of the coefficient variation (CV) for in vitro experiments on shear and tensile strengths. The experiments were performed in laboratory by fifty international and national studies on adhesion materials. Statistical data allowing the estimation of the coefficient of variation was gathered from each scientific article since none of them had such a measurement previously calculated. Excel worksheet was used for organizing the data while the sample normality was tested by using Shapiro Wilk tests (alpha = 0.05) and the Statistical Analysis System software (SAS). A mean value of 6.11 (SD = 1.83) for the coefficient of variation was found by the data analysis and the data had a normal distribution (p>0.05). A range classification was proposed for the coefficient of variation from such data, that is, it should be considered low for a value lesser than 2.44; intermediate for a value between 2.44 and 7.94, high for a value between 7.94 and 9.78, and finally, very high for a value greater than 9.78. Such classification can be used as a guide for experiments on adhesion materials, thus making the planning easier as well as revealing precision and validity concerning the data.
Statistic; Shear strength; Tensile strength