SciELO - Scientific Electronic Library Online

 
vol.18 número1Effect of filler particles on surface roughness of experimental composite seriesEvaluation of subcutaneous and alveolar implantation surgical sites in the study of the biological properties of root-end filling endodontic materials índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

Compartir


Journal of Applied Oral Science

versión impresa ISSN 1678-7757

Resumen

RETAMOSO, Luciana Borges; ONOFRE, Niége Michelle Lazzari; HANN, Luciane  y  MARCHIORO, Ernani Menezes. Effect of light-curing units in shear bond strength of metallic brackets: an in vitro study. J. Appl. Oral Sci. [online]. 2010, vol.18, n.1, pp.68-74. ISSN 1678-7757.  http://dx.doi.org/10.1590/S1678-77572010000100012.

OBJECTIVES: To determine the influence of the light curing units on the shear bond strength of orthodontic brackets. MATERIAL AND METHODS: Seventy-two premolars were divided into six groups (n=12): Group I: brackets bonded with Transbond and polymerization with halogen light; Group II: Transbond and LED; Group III: Fuji Ortho and halogen light; Group IV: Fuji Ortho and LED; Group V: Fuji Ortho, without acid and halogen light; Group VI: Fuji Ortho, without acid and LED. The groups were tested to shear strength in a universal testing machine at a crosshead speed of 0.5 mm/min. Data were analyzed statistically by ANOVA and Tukey's test. RESULTS: The composite resin presented higher shear bond strength than the resin-modified glass ionomer cement (p<0.05). The halogen light and LED sources produced similar shear bond strength (p>0.05). CONCLUSION: The shear bond strength was influenced by the material but not by the light-curing unit. The use of LED reduced the experimental time by approximately 60%, with the same curing efficiency.

Palabras clave : Shear bond strength; Halogen light; LED; Brackets.

        · texto en Inglés     · Inglés ( pdf epdf )

 

Creative Commons License Todo el contenido de esta revista, excepto dónde está identificado, está bajo una Licencia Creative Commons