SciELO - Scientific Electronic Library Online

 
vol.8 número4On the effect of the near field records on the steel braced frames equipped with energy dissipating devicesStatic and free vibration analysis of carbon nano wires based on Timoshenko beam theory using differential quadrature method índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

Compartilhar


Latin American Journal of Solids and Structures

versão On-line ISSN 1679-7825

Resumo

AKHAVEISSY, A.H.. Lateral strength force of URM structures based on a constitutive model for interface element. Lat. Am. j. solids struct. [online]. 2011, vol.8, n.4, pp.445-461. ISSN 1679-7825.  http://dx.doi.org/10.1590/S1679-78252011000400005.

This paper presents the numerical implementation of a new proposed interface model for modeling the behavior of mortar joints in masonry walls. Its theoretical framework is fully based on the plasticity theory. The Von Mises criterion is used to simulate the behavior of brick and stone units. The interface laws for contact elements are formulated to simulate the softening behavior of mortar joints under tensile stress; a normal linear cap model is also used to limit compressive stress. The numerical predictions based on the proposed model for the behavior of interface elements correlate very highly with test data. A new explicit formula based on results of proposed interface model is also presented to estimate the strength of unreinforced masonry structures. The closed form solution predicts the ultimate lateral load of unreinforced masonry walls less error percentage than ATC and FEMA-307. Consequently, the proposed closed form solution can be used satisfactorily to analyze unreinforced masonry structures.

Palavras-chave : masonry wall; interface element; softening behavior; micro modeling; cap model; tensile strength of mortar joint.

        · texto em Inglês     · Inglês ( pdf )

 

Creative Commons License Todo o conteúdo deste periódico, exceto onde está identificado, está licenciado sob uma Licença Creative Commons