SciELO - Scientific Electronic Library Online

 
vol.11 issue1Finite element implementation for the analysis of 3D steel and composite frames subjected to fireThe effect of viscoelasticity on creep behavior of double-lap adhesively bonded joints author indexsubject indexarticles search
Home Pagealphabetic serial listing  

Services on Demand

Journal

Article

Indicators

Related links

Share


Latin American Journal of Solids and Structures

On-line version ISSN 1679-7825

Abstract

ZHANG, Shilei et al. A model updating method for truss structure using stepwise uniform design schemes considered primary factors. Lat. Am. j. solids struct. [online]. 2014, vol.11, n.1, pp.19-34. ISSN 1679-7825.  https://doi.org/10.1590/S1679-78252014000100002.

Based on the feasibility and reliability of a forward analytical model updating method with uniform design having been proven, this paper studies the effectiveness of the method in the condition that structural measured information is uncertain and incomplete. By taking the experimental data of a steel truss as an example, this paper studies the method of experimental data processing, the determination of structural model with unknown parameters, the interval estimation of identification results and stepwise uniform design considered the correlation among identification parameters. The results show that the errors between the numerical results computed by the updated model and the experimental data are acceptable, which means the method in this paper is feasible and reliable. In the end, based on our experiences and lessons, we summarize a model updating method for complex structures using stepwise uniform design schemes considered the primary and secondary factors, and expound its computational steps.

Keywords : Truss Structure; Model Updating; Uniform Design; Factor.

        · text in English     · English ( pdf )

 

Creative Commons License All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License