SciELO - Scientific Electronic Library Online

 
vol.11 número10Modeling the size dependent pull-in instability of beam-type NEMS using strain gradient theoryVibration reduction of composite plates by piezoelectric patches using a modified artificial bee colony algorithm índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

Compartilhar


Latin American Journal of Solids and Structures

versão On-line ISSN 1679-7825

Resumo

GODOY, Luis A.; BOCCARDO, Adrián D.; RODRIGUEZ, Francisco J.  e  DARDATI, Patricia M.. Stress concentration around perforations produced by corrosion in steel storage tanks. Lat. Am. j. solids struct. [online]. 2014, vol.11, n.10, pp.1830-1845. ISSN 1679-7825.  http://dx.doi.org/10.1590/S1679-78252014001000008.

This paper presents numerical results of stress concentration factors for plates perforated by corrosion. Evidence from 25 plates with corrosion perforation considered show that typical shapes may be characterized as a deviation from an ellipse or from a circle. In order to model typical perforations created by this type of corrosion, holes with non-circular boundaries have been considered in the form of cosine shape and variations from it. Two load cases are investigated: uniaxial and shear stress fields in an elastic plane stress problem. The influence of the amplitude of deviation with respect to an ellipse or circle and the local curvature of the internal boundary of the hole are studied. A simplified model of an equivalent ellipse originally proposed by Nishida is shown to provide good estimates for stress concentration factors for a range of shapes induced by corrosion.

Palavras-chave : finite element analysis; oil tanks; corrosion; steel tanks; stress concentration factors.

        · texto em Inglês     · Inglês ( pdf )

 

Creative Commons License Todo o conteúdo deste periódico, exceto onde está identificado, está licenciado sob uma Licença Creative Commons