ABSTRACT
Quality Reference Values (QRVs) for potentially toxic elements are obtained from background levels in soils. However, this determination from mean values or percentiles is not appropriate given the variability in the natural distribution of these elements in soils. Therefore, the objective of this study was to propose a new methodology to establish the QRVs, using the Médio Paraíba region (RJ, Brazil) as an example, from groups of soils defined based on the pseudo-total levels of B, Ba, Co, Cr, Cu, Ni, Pb, and Zn through the use of multivariate analyses and discriminant functions. A total of 40 points, collected at depths of 0-20 and 20-40 cm, were used for the determination of pseudo-total contents, according to the EPA 3051A methodology. The samples were separated into three groups to better represent the variability of the soils of the region. The classification functions were obtained based on the variables Mn, Fe, and Mg. In general, the groups G1 and G2 presented lower values than the ones obtained when the sample universe was used, whereas G3 presented higher values. The QRVs obtained from the soil groups presented substantial differences that translate into advantages for the management of the contaminated areas of the region.
Key words:
Guiding values; Heavy metals; Cluster analysis
