Abstract
Objective
With the purpose of evaluating the best results for a proposed orthodontic treatment, the aim of this research was to verify the frictional force between archwires and orthodontic brackets in sliding mechanics.
Material and method
Three different types of brackets were used: conventional metal, self-ligating metal and conventional polycrystalline esthetic type (n=10), totaling 30 brackets and .019 x .025 inches stainless steel rectangular wire. An acrylic plate was used. The wire was fixed to the brackets (conventional metal and conventional polycrystalline esthetic) with esthetic elastomeric ligation. The acrylic plate together with the 019 x 0.025 inches wire fitted to it was attached to the base plate of the Instron 4411 universal test machine so that it was positioned perpendicular to the ground. The bracket was drawn through the archwire segment at a speed of 5 mm / minute for a distance of 5 mm. For each type of bracket, ten tests were performed, with the bracket and archwire set being changed for each repetition. Data were analyzed by one-way Analysis of Variance (p <0.0001) and the Tukey Test (p <0.05).
Result
Convencional metal and self-ligating brackets presented similar friction (p>0.05), while ceramic bracket presented higher frictional resistance during sliding test (p<0.05).
Conclusion
It was concluded that the type of bracket influenced the frictional force value obtained, and better results were found when the metal and self-ligating brackets were used. The ceramic bracket presented a higher frictional force value.
Descriptors:
Dental friction; orthodontic wires; orthodontic brackets
Thumbnail
Thumbnail
