Water erosion modeling by the Erosion Potential Method and the Revised Universal Soil Loss Equation: a comparative analysis

Modelagem da erosão hídrica pelo Método de Erosão Potencial e pela Equação Universal de Perda de Solo Revisada: uma análise comparativa

Abstract

Water erosion is the principal degradation process of tropical soils, and its effects can be measured by modeling techniques. Erosion models provide a diagnosis of the soil loss intensity and can support the planning of soil conservation practices. Models with low data requirements, such as the Revised Universal Soil Loss Equation (RUSLE) and, more recently, the Erosion Potential Method (EPM), are mainly applied in Brazil. Thus, the objective of this work was to estimate water erosion soil-loss rates using the EPM and RUSLE models on a tropical subbasin, followed by a comparison of their outcomes. The models’ application considered soil physical parameters, edaphoclimatic conditions of the area, land use, and subbasin management practices. The accuracy of the methods was verified using total transported sediment and water discharge data. We compared the models using Pearson's correlation analyses, considering a 5% of significance. We found a predominance of moderate-intensity erosion with average soil loss of 1.17 and 1.46 Mg ha^-1 year^-1, measured by EPM and RUSLE, respectively. The EPM model underestimated soil losses by 15.27%, and RUSLE overestimated by 19.08%, indicating a higher percentage of areas with high erosion rates (4.60%). The models presented results with a different order of magnitude, but with significant correlations, indicating that both methods pointed out similar zones of intense and light-erosion rates.

Keywords:
RUSLE; Soil Conservation; Soil Losses