SciELO - Scientific Electronic Library Online

 
vol.18 issue2Evaluation of global geopotential models for the states of Maranhão and PiauíEvaluation of pictorial symbols in tourist maps author indexsubject indexarticles search
Home Pagealphabetic serial listing  

Boletim de Ciências Geodésicas

On-line version ISSN 1982-2170

Abstract

DEBIASI, Paula; HAINOSZ, Fabiano  and  MITISHITA, Edson A.. On-the-Job Calibration of low cost digital camera with vertical control points. Bol. Ciênc. Geod. [online]. 2012, vol.18, n.2, pp. 225-241. ISSN 1982-2170.  http://dx.doi.org/10.1590/S1982-21702012000200004.

Knowledge of the internal camera geometry is an important task to perform photogrammetric works. However, IOPs from camera calibration using dataset with the same techniques and environmental conditions of the aerial survey is a prerequisite to produce photogrammetric mapping using direct georeferencing technique. In direct georeferencing, the exterior orientation parameters are determined based on GPS and INS observations. The use of these parameters, in the calibration process with additional ones, reduces the correlations between interior and exterior orientation parameters. This paper investigates the use of camera position and different configurations of vertical control points in the on-the-job calibration of digital camera Kodak DSC Pro SLR/c. The advantages of using cross strips to perform on-the job calibration were analyzed by statistical correlations between interior and exterior orientation parameters. Finally, the vertical and horizontal accuracies from the calibration experiments, with different configurations of vertical control points and flights strips were compared using the analysis of discrepancies in the check points.

Keywords : On-the-Job Calibration; Low Cost Camera; Ttest Field.

        · abstract in Portuguese     · text in Portuguese     · pdf in Portuguese