EFFECT OF PARTICLE SIZE AND BACTERIAL INOCULANT ON THE TEMPERATURE, DENSITY AND pH OF PEARL MILLET SILAGES¹

EFEITO DO TAMANHO DE PARTÍCULA E DE INOCULANTE BACTERIANO NA TEMPERATURA, DENSIDADE E pH DE SILAGENS DE MILHETO

ABSTRACT

The present study aimed to investigate the temperature at different depths of the stack silo and strata front profile before and after the removal of silage. Also, the pH values in the upper and lower profile and the silage density of the fresh materials (FM) and dry matter (DM) in pearl millet silages with particle sizes of 5 or 20 mm, with or without inoculant, were assessed, using corn silage as controls. There was an interaction (P<0.05) silage × stratum profile and silage × depth profile for the temperatures before the removal of silage, and the pearl millet silages had lower temperatures in the upper stratum compared to corn. The temperature gradient between the silage and environment pearl millet and corn silos were smaller in the lower stratum profile. The temperature gradient after the removal of the silage was less than 50 cm deep at all the pearl millet silos. There were no differences in the densities of the FM and DM of the studied silages. The pH values of the silages before their removal were higher in the upper stratum and lower stratum in the bottom of all the pearl millet silages, in contrast with corn silage. The pearl millet silos had lower pH values in the lower stratum of the silo. Silages with 5 mm particle size provide lower temperatures in the middle portion of the panel before the removal of the silage. The use of bacterial inoculant in this study did not change the characteristics evaluated.

Keywords:
Inoculants; Lactobacillus plantarum; Pennisetum glaucum (L.) R; B.; Propionibacterium acidipropionic; Stack silo.