Abstract
This paper presents the use of the technique of digital image correlation for obtaining the elasticity modulus of concrete. The proposed system uses a USB microscope that captures images at a rate of five frames per second. The stored data are correlated with the applied loads, and a stress-strain curve is generated to determine the concrete compressive modulus of elasticity. Two different concretes were produced and tested using the proposed system. The results were compared with the results obtained using a traditional strain gauge. It was observed a difference in the range of 4% between the two methods, wherein this difference depends on some parameters in the case of the DIC results, as focal length and a video capture resolution, indicating that DIC technique can be used to obtain mechanical properties of concrete.
Keywords:
experimental testing; concrete strain; concrete structures
