Abstract
Objective:
To evaluate the inclusion capacity and bactericidal efficiency of diallyl dimethyl ammonium chloride (PDADMAC) diluted in tetrahydrofuran (THF) upon inclusion in the medical grade silicone polymer structure.
Material and Methods:
It was diluted the PDADMAC in THF at the concentration of 4wt%. It was included in the silicon paste during its vulcanization process. The contact angle measurements were performed to evaluate whether the biocide inclusion into the silicon paste was successful. All samples were sterilized with gamma radiation at 25KGy-dosage prior to the microbiological tests. Microbiological testing strictly followed the Antibacterial products - Test for antibacterial activity and efficacy JIS Z 2801: 201010 and the used of specific bacteria, as Staphylococcus aureus ATCC 6538P and Escherichia coli ATCC 8739.
Results:
The results showed that PDADMAC, when dissolved in THF at 4wt%, displayed good incorporation in medical silicone and a broad-spectrum antibacterial response. The results of the tests using Escherichia coli ATCC 8739 and Staphylococcus aureus ATCC 6538P showed that the silicone with no biocide addition did not present antibacterial activity. In contrast, the experimental group plus 2 mL of PDADMAC would have an ideal antibacterial response.
Conclusion:
Medical grade silicone can be used as a material with antibacterial properties, since it has been able to keep PDADMAC compound attached to its structure, thus acquiring antimicrobial property.
Keywords:
Dental Materials; Silicone Elastomers; Maxillofacial Prosthesis
