SciELO - Scientific Electronic Library Online

 
vol.17 número4Dureza Knoop do esmalte e resistência ao cisalhamento de braquetes colados com resina composta com e sem flúorAtresia maxilar: há diferenças entre as regiões anterior e posterior? índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

Compartilhar


Dental Press Journal of Orthodontics

versão impressa ISSN 2176-9451

Resumo

SHIMIZU, Roberto Hideo et al. Assessment of shear bond strength of brackets bonded by direct and indirect techniques: an in vitro study. Dental Press J. Orthod. [online]. 2012, vol.17, n.4, pp.1-7. ISSN 2176-9451.  http://dx.doi.org/10.1590/S2176-94512012000400008.

OBJECTIVE: This in vitro study was designed to evaluate the shear bond strength (SBS) of orthodontic metal brackets bonded by direct and indirect techniques. METHODS: Thirty healthy human maxillary premolar teeth were used. The teeth were divided into three groups of 10 teeth each: Group I - indirect bonding with SondhiTM Rapid-Set system (3M/Unitek), Group II - indirect bonding with TransbondTM XT adhesive system (3M/Unitek) and Group III - direct bonding with TransbondTM XT adhesive system (3M/Unitek). After bonding and obtaining the specimens for the study, the specimens were subjected to SBS testing in a universal testing machine (Emic, model DL-500). The Kolmogorov-Smirnov test was applied to ascertain that the data had a normal distribution and the Bartlett test to check whether there was homogeneity of variance. One-factor analysis of variance was performed and, subsequently, Tukey's test for paired means. A 5% significance level was adopted. RESULTS: The results of Group I were 67.6 (N) and 5.9 (MPa); Group II, 68.9 (N) and 6.1 (MPa) and Group III (control), 92.5 (N) and 8.1 (MPa). CONCLUSION: It can therefore be concluded that the means for Group III were significantly higher compared with Groups I and II in both Newton (N) and Megapascal (MPa) values. The means attained by the indirect bonding technique used in Groups I and II, however, exhibited no statistically significant differences.

Palavras-chave : Dental bonding; Dental debonding; Shear bond strength; Corrective orthodontics.

        · resumo em Português     · texto em Inglês     · Inglês ( pdf )

 

Creative Commons License Todo o conteúdo deste periódico, exceto onde está identificado, está licenciado sob uma Licença Creative Commons