SciELO - Scientific Electronic Library Online

 
vol.17 número2Effects of Birefringence on the Electromagnetic Guidance of Structures Produced by Femtosecond LaserA High Gain and Directivity Bow Tie Antenna Based on Single-Negative Metamaterial índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

Compartilhar


Journal of Microwaves, Optoelectronics and Electromagnetic Applications

versão On-line ISSN 2179-1074

Resumo

BENATIA, K.  e  TELIA, A.. Electrical and optical numerical modeling of DP-PPV based polymer light emitting diode. J. Microw. Optoelectron. Electromagn. Appl. [online]. 2018, vol.17, n.2, pp.229-245. ISSN 2179-1074.  https://doi.org/10.1590/2179-10742018v17i21210.

In this paper, an in-depth study of the electrical and optical characteristics of Polymer Light Emitting Diodes ITO/PEDOT: PSS/DP-PPV derivatives/Al(Ca) is presented. Three polymer materials are considered; poly(2,3-diphenyl-5-(4-heptyloxy-4'-oxytrimethylenediphenyl)-phenylenevinylene) (P1), poly(2,3-diphenyl-5-[4-(4-pentylcyclohexyl)phenoxy]-propyl-p-phenylene vinylene) (P2) and poly(2,3-diphenyl-5-(2-(1, 4, 5-triphenyl-1H-2-imidazoloyl)-1-oxytrimethylene phenyl) phenylene vinylene) (P3). The J-V characteristics are investigated using a device model which includes the injection, transport, and recombination mechanisms. The electron and hole mobility of each material are fitted to experimental data. The charge balance factor CBF, the external quantum efficiency EQE, the Langevin recombination rates and the singlet exciton densities profiles are studied. The results are found to be in a good agreement with experimental data especially in the low current densities region, indicating that these PLEDs electrons mobility affects greatly the J-V characteristics compared with holes mobility, and that is because electrons band offset smaller than that of holes. The best performance is obtained with P1 device with a CBF value of almost unity and an EQE still low (4.7 %) but similar to other PPVs and MEH-PPVs based devices.

Palavras-chave : Electrical and optical properties; Finite difference modeling; Organic light emitting diode.

        · texto em Inglês     · Inglês ( pdf )