SciELO - Scientific Electronic Library Online

 
vol.24Genetic Versus Environmental Influence on Radial Variation in Myracrodruon urundeuva WoodEvaluation of Bambusa vulgaris Energy Potential Based on Age author indexsubject indexarticles search
Home Pagealphabetic serial listing  

Services on Demand

Journal

Article

Indicators

Related links

Share


Floresta e Ambiente

Print version ISSN 1415-0980On-line version ISSN 2179-8087

Abstract

PAES, Juarez Benigno et al. Corrosivity Caused by Salt Solutions Employed in the Wood Dimensional Stability. Floresta Ambient. [online]. 2017, vol.24, e00119914.  Epub Aug 17, 2017. ISSN 2179-8087.  https://doi.org/10.1590/2179-8087.119914.

The study aimed to evaluate the corrosivity of salt solutions after and before the impregnation in the wood. Solutions with concentration of 5% of chloride of lithium, sodium carbonate, magnesium sulphate, zinc sulphate and copper sulphate II had been kept during 6 hours, at 25; 45 and 100 °C, in contact with steel plates carbon samples of 1.25 × 0.1 × 7.5 cm (width × thickness × length), before and after its contact with wood samples of Corymbia torelliana and Eucalyptus cloeziana. There was no effect of the temperature in the corrosion of the pure solutions. After the contact with woods, corrosivity was incremented with copper II and zinc sulphate solutions. Copper II sulphate caused the biggest loss of mass in plates, and its contact with metallic surfaces is not recommended as wood treatment and drying chambers.

Keywords : corrosion; salt solutions; extractives; wood.

        · abstract in Portuguese     · text in Portuguese     · Portuguese ( pdf )