Numerical evaluation of laboratory apparatuses for the study of infiltration and runoff

Avaliação numérica de simulador de chuva para estudos de infiltração e escoamento superficial

ABSTRACT

Runoff apparatuses (RA) are developed to study infiltration, runoff generation, and erosion processes. Several RA designs are available, but limited attention has been given to the effects of the equipment scale, initial, and boundary conditions on measured runoff. This paper presents a model-based evaluation of RAs using a finite element solution for Richard’s equation and a novel ground surface boundary condition designed to accommodate unsaturated soil behavior. The hydraulic properties of two tropical soils were considered, with multiple combinations of initial water contents, specimen dimensions, and sloping angle. The numerical exercises indicate that soils with lower air-entry values require an equilibrium stage for the establishment of initial conditions. Testing protocols with equilibrium times of 48 hours are recommended. Moisture flow produced by gravity when sloping the specimen was shown to potentially affect surface conditions and, consequently, runoff. Testing specifications to minimize the effects of specimen sloping are presented. The runoff mechanism in an RA was shown to have up to three stages, all with clear physical meaning. The third stage is an undesirable consequence of the influence of the RA’s impervious bottom. The establishment of the minimum specimen thickness that prevents boundary effects was shown to have major importance to testing results.

Keywords:
Rainfall-runoff interaction; Physical model; Scale effect; Rainfall simulator