SciELO - Scientific Electronic Library Online

 
vol.69 número3Technical viability of self-compacting concretes with by-products from crushed coarse aggregate productionOptimization of structures subjected to dynamic load: deterministic and probabilistic methods índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

Compartilhar


REM - International Engineering Journal

versão On-line ISSN 2448-167X

Resumo

LUBAS, Paulo Henrique  e  SILVA, Valdir Pignatta. A general method for designing non-symmetrical composite steel and concrete columns. REM, Int. Eng. J. [online]. 2016, vol.69, n.3, pp.273-279. ISSN 2448-167X.  http://dx.doi.org/10.1590/0370-44672014690143.

The study of non-symmetrical composite columns is complex and European and North American standards only approach this issue superficially. In this text, a new proposal is presented for non-symmetrical composite column design subject to biaxial bending and axial compression, based on the compatibility of the deformation method, which considers the nonlinearity of the material with constitutive models according to Brazilian standards and geometric nonlinearity, as well as the equilibrium of the column in the displaced position. As a strategy for solving the general method, use is made of the "fiber element method", and for solving problems involving nonlinear equilibrium equations, the Newton-Raphson method.

Palavras-chave : composite columns; design; general method; Strain Compatibility Method; fiber element method; Newton-Raphson.

        · texto em Inglês     · Inglês ( pdf )