Effect of the addition of young bamboo culm flour as a sugar and/or fat substitute in cookie formulations

Abstract

One of the innovation strategies of the bakery industry is the use of new ingredients capable of increasing the health appeal of products. The objective of this study was to evaluate the effect of partial substitution (15%) of wheat flour by young bamboo culm flour (YBCF) in cookies formulations, using a central composite design with two variables (sugar and fat reductions) and three replicates at the central point. Formulations were selected by surface response methodology (p<0.10) and evaluated over 28 days of storage for stability and nutritional composition. Only sugar reduction led to significant differences in the diameter of the cookies. Formulations with 50% of reduction of sugar and fat (F2 and F3, respectively) were selected for the study, in addition to a control formulation (CF). Moisture content and water activity of the cookies remained low throughout the storage, as recommended for the maintenance of the crispness. Cookies F2 and F3 were light-colored, similar to CF, and presented lower energy value (0.83 and 11.73%, respectively), compared with CF. These results indicate that YBCF may be a promising ingredient for the bakery industry, once it contains high fiber levels and allows the reduction of up to 50% sugar and fat in cookies.

Keywords:
bamboo flour; healthy products; new ingredient

1 Introduction

The cookies production in Brazil ranked fifth among the top cookies producing countries, with a production of 1.3 million tons in 2015, and per capita consumption of 6.01 kg per year, surpassed only by Argentina, the United Kingdom, Italy, and United States ( Associação Brasileira das Indústrias de Biscoitos, Massas Alimentícias e Pães & Bolos Industrializados, 2015 ). This product is highly consumed by different audiences, due to its long shelf-life and ease of consumption, and especially by children, due to the sweet taste and perfect crisp texture ( Moraes et al., 2010 ; Feddern et al., 2011 ).

Cookies can be defined as baked cereal-based products containing high sugar and fat levels, moisture content from 2 to 8%, and water activity ranging from 0.1 to 0.3. Thus, the quality of the ingredients used in cookies formulation has a direct influence on the characteristics of the final product ( Gökmen et al., 2008 ; Pareyt et al., 2009 ).

The sugar reduction in cookies can affect the texture, flavor, sweetness, color, and the conservation of the product as it assists in maintaining the moisture content constant, so that the cookie does not gain moisture from the environment, and do not lose its crunchiness ( Manley, 2011 ). The fat reduction can affect dough lubrication, thus impairing the mixing step, volume, color, stability or shelf life of the processed products. Fat is one of the basic components of cookies formulation, found at relatively high levels, up to 60% ( Cauvain & Young, 2006 ; Manley, 2011 ). It contributes to the production of softer and shorter cookies, while sugar contributes to the increase in cookies diameter and crispness ( Cauvain & Young, 2006 ; Manley, 2011 ). This is the great challenge of the bakery industry since both cannot be easily replaced, especially in the complex structure of cookies ( Pareyt et al., 2009 ).

Consumers' concern about maintaining health and preventing certain diseases has contributed to increasing the market demand for healthier, low-fat, low-sugar, and fiber-containing products, especially bakery products, which are consumed in large quantities in a daily routine, with an important role in human nutrition ( Martins et al., 2017 ).

Choudhury et al. (2015) reported that replacing up to 10% wheat flour for bamboo shoot fiber in cookies formulations enhanced the nutraceutical and functional properties due to the presence of phenolic compounds, fibers, proteins, and vitamin C. Farris et al. (2008) evaluated the water retention capacity of bamboo shoot fiber in Amaretti biscuits, which contains almond flour rather than wheat flour, and found that the addition of fiber limited the sugar crystallization, maintaining the traditional texture characteristics of the product after 10 days of storage. However, before using bamboo shoots in food formulations, they must be previously submitted to appropriate treatment, as is done with cassava, which goes through the drying/roasting process ( Cereda, 2003 ), since they also present in its composition cyanogenic glycosides, linamarin and taxifilina, which are compounds that can form hydrocyanic acid (about 1000 mg/kg) ( Satya et al., 2010 ; Satya et al., 2012 ). Therefore, it is expected that these compounds content decrease with the growth of the culm, so the young bamboo culm may present a lower content of these toxic compound.

When evaluating the effect of the addition of bamboo shoot fiber and the processing conditions (time and temperature) of Amaretti biscuits, Farris & Piergiovanni (2008) observed that the addition of fiber, associated with oven time and temperature, increased hardness of the biscuits. However, the authors suggested a greater addition of fiber to improve the mouthfeel as well as the overall quality of the product.

However, it is worth mentioning that increasing the production of bamboo shoot fiber for use in human consumption can alter the sustainability of bamboo clumps, once it is possible to collect only 20% to 30% shoots per year ( Pereira & Beraldo, 2016 ). Thus, alternative sources of fiber are required, and the young bamboo culm can be a raw material of great potential, as it allows a greater fiber yield when compared to bamboo shoots ( Felisberto et al., 2017 ).

Some young bamboo culm species have been highlighted not only by the high potential for extraction of starches and fibers ( Felisberto et al., 2017 ), but also by their sugar content, including the species Dendrocalamus asper specie, which presents on average 9% sugar in the young culms. Although this specie is of Asian origin, it is cultivated in Brazil (in the cities of Jacareí and Mogi das Cruzes/SP) for the production of both canned and in natura bamboo shoots. Therefore, it is noticed that the bamboo shoot chain is already well established, while the young culm is still little explored, since its use is restricted to building materials, furniture and handicrafts, with limited shelf life due the attack of powder-post beetles, which is attracted by the starch.

A young culm from the variety D. asper specie can reach 40 m in height and up to 20 cm in diameter ( Liese & Kohl, 2015 ), and contains high levels of starch and fibers. Thus, the culm of this specie may be an industrial source of young bamboo culm flour, contributing for using the whole plant.

Considering that the search for potential food ingredients has been a strong trend, the use of young bamboo culm flour may be an interesting alternative for the development of healthier products using new ingredients, besides contributing with the sustainability and longevity of bamboo clumps. Thus, the objective of the study was to evaluate the technological and nutritional properties of cookies formulations, with partial substitution of wheat flour for young bamboo culm flour from D. asper specie, with reduced sugar and/or fat content.

2 Materials and methods

2.1 Raw materials

The young bamboo culm flour (YBCF) from D. asper specie was obtained in a previous study carried out by our research group ( Felisberto et al., 2017 ) ( International Organization for Standardization, 2007 ). The young culms were collected, divided into three parts (bottom, middle, and top), cut into smaller pieces, treated with sodium metabisulphite solution (200 ppm/1 h), and dried in an oven (50 °C/72 h). Then, the material was ground in a knife mill to obtain a homogeneous flour. All the other ingredients were purchased from the same batch in the local market of Campinas (SP).

2.2 Characterization of wheat flour and young bamboo culm flour

YBCF was evaluated for the presence of total cyanogenic heteroside compounds, according to Fox & Robyt (1991) , with some adaptations. The method is known as the Konigi method and uses the U.V.-VIS spectrophotometry technique. The method is based on the reduction of sodium picrate by cyanide to form a colored product, which is measured in a colorimeter at 530 nm. In the validation process, this method had a lower detection limit of 5 ppm and a lower limit of quantification of 10 ppm cyanide, with a 2% SD, showing a stable color resistant to other components. The validation was performed using the same parameters proposed by Fox & Robyt (1991) , with an adaptation of the matrix effect to young bamboo culm flour. Both wheat flour and YBCF from D. asper specie were characterized for proximate composition, according to Association of Official Analytical Chemists (1998) for moisture (method 44-15.02), proteins (method 46-13.01) and ash (method 08-01.01) contents. Total fiber (method 992-16) and lipids (method 920.39) contents were determined according to American Association of Cereal Chemists (2010) , while digestible carbohydrates were calculated by difference [100- (moisture + lipids + proteins + ash + total fiber)].

2.3 Experimental design

A factorial design with two variables (2² - sugar and margarine reductions) and three replicates at the central point was used, totaling 7 formulations ( Table 1 ). In all formulations, a partial substitution (15%) of wheat flour for young bamboo culm flour was performed. Formulations without reduction of both, sugar and fat contents (F5, F6 and F7) are considered as the central point and control formulation of first part of the experiment.

Table 1
Factorial design 2² with three central points of the cookies formulations.

Formulations	Coded Levels		Real Levels (%)1
	X1	X2	Sugar reduction	Fat reduction
F1	-1	-1	0	0
F2	+1	-1	50	0
F3	-1	+1	0	50
F4	+1	+1	50	50
F5	0	0	25	25
F6	0	0	25	25
F7	0	0	25	25

• ¹
  Percentage reduction of x₁ (sugar) and x₂ (margarine) of each formulation.

2.4 Manufacture of cookies

The formulation of Clerici et al. (2013) was used as a base, with some changes in the amount of ingredients (in relation to 100% wheat flour), as follows: 54.60% sugar, 38% margarine, 9.4% egg yolk, 0.15% vanilla essence, 0.36% condiments (nutmeg, clove powder, and cinnamon powder), 0.61% salt, 2.5% ammonium bicarbonate, and 17.65% maize starch. Two mixing stages were used for the cookies manufacture. First, sugar, fat, egg yolk, and vanilla essence were creamed in a high-speed planetary mixer (Kitchen aid, St Joseph, USA) for 5 minutes. The other ingredients were then added and homogenized for approximately one minute at a low speed. Water was added to the optimal absorption level so that dough reached the optimum development over 3 minutes of mixing at a medium speed. The optimum development of the dough is the point at which all ingredients have been properly incorporated, and the dough is homogeneous and at an optimum point, which allows the biscuits to be molded. The dough was then rolled out to 5 mm thick sheets, cut into cylinders 38 mm in diameter, and baked for about 7 minutes in a hearth oven, model HF4B (Haas, Curitiba, Brazil), at surface and ceiling temperatures of ~200 °C and 220 °C, respectively. Afterwards, the cookies were cooled for 30 minutes, vacuum-packed and stored at room temperature, protected from light, until analysis.

3 Technological characterizations of the cookies

3.1 Diameter, thickness, weight loss, and specific volume

The diameter and thickness of the cookies were measured using a pachymeter, and the specific volume was calculated by the ratio between the apparent volume and the cookies' weight after baking, according to the methodology of American Association of Cereal Chemists (2010) . The weight loss was calculated as a ratio between raw dough and baked cookies' weight. The apparent volume was measured by the seed displacement method, according to AACCI (method 10-05.01, 2010). All analyses were performed on 10 cookie samples.

3.2 Moisture

Moisture content was determined according to the methodology of the Association of Official Analytical Chemists (1998) (method 44-15.02).

3.3 Water activity (aw)

Water activity (aw) was determined by the water activity meter using a dew point sensor (Aqualab, 4TEV, Decagon, Pullman, USA), and the readings were performed at room temperature (25 °C).

3.4 Instrumental texture

Texture of the cookies was determined using the TA-XT Plus texture analyser (Stable Micro Systems, England) using a 50 kg load cell, equipped with a three-point bend rig (HDP/3PB) and heavy duty platform. Maximum force was recorded as the hardness value and test conditions were: pre-test speed of 1 mm/s, test speed of 3 mm/s, post-test speed of 10 mm/s, and penetration distance of 5 mm. The readings were performed on 10 cookie samples.

3.5 Color measurements

The color parameters (L*, a*, and b*) were evaluated according to the CIELab system, in a colorimeter CR-400 (Konica Minolta, Japan), using illuminant D65 and observer angle 2º, and the readings were performed using three replicates per sample.

3.6 Statistical analysis to select the cookies

Data were evaluated by the Response Surface Methodology to calculate the regression coefficients, followed by analysis of variance (ANOVA), at a significance level of 10% with a minimum coefficient (R²) of 0.7, using the software Statistica (version 8.0). The formulations whose diameter does not vary with the reduction of fat and with the reduction of the sugar content of the formulation were selected.

3.7 Proximate composition of the selected cookies

The selected cookies were characterized for the proximate composition as described above for wheat flour and YBCF. The energy value was calculated considering the energy conversion factors: 9 kcal/g for lipids, 4 kcal/g for proteins, and 4 kcal/g for carbohydrates. A formulation without sugar and/or fat reduction, with no substitution of wheat flour for the young bamboo culm flour was used as control (CF).

3.8 Technological characterization and stability of the selected cookies

The moisture contents, aw, texture, and color parameters were determined for the selected cookies and the control formulation, as described above, at days 1, 7, 14, 21, and 28 of storage.

3.9 Statistical analysis of the selected cookies

The results of the proximate composition and the technological characterization were obtained at least in triplicate and evaluated by difference among the formulations, through analysis of variance (ANOVA), at a significance level of 5%, followed by the Scott-Knott test, using the statistical program SISVAR, version 5.6.

4 Results and discussion

4.1 Characterization of the raw materials

The wheat flour for home use contains 12.57 ± 0.06 g/100 g moisture; 0.64 ± 0.01 g/ 100 g lipids; 10.92 ± 0.11 g/100 g protein; 0.42 ± 0.05 g/100 g ash; 3.50 ± 0.29 g/100 g total fiber; and 71.95% comprising digestible carbohydrates. Young bamboo culm flour (YBCF) has 5.37 ± 0.05 g/100 g moisture; 0.29 ± 0.00 g/100 g lipids; 1.27 ± 0.05 g/100 g protein; 1.07 ± 0.05 g/100 g ash; 72.23 ± 0.35 g/100 g total fiber; and 19.77 g/100 g comprising digestible carbohydrates. YBCF presented a cyanogenic content lower than the detection limit (5 ppm) of the Konigi method, which means that its consumption does not represent health risks.

It is observed that the wheat flour exhibited a typical chemical composition of wheat flour for home use, with other carbohydrates as the main component (>70 g/100 g). However, according to Manley (2011) , flours with protein content around 11% present ideal conditions for the development of a stronger gluten network, which is indicated for the preparation of cream cracker biscuits. Therefore, we chose to use starch (17.65%) in the cookies formulations, to dilute the flour proteins and allow the development of a weaker and more extensible gluten network, with minimal changes in texture, crispness, and shape of the cookies.

Young bamboo culm flour had fiber as the major component (>70 g). This result was higher than that observed in flours from other plants, such as eggplant flour (44 g/100 g) ( Perez & Germani, 2004 ) and flours of cabbage stalks and spinach culms (36 and 49 g/100 g, respectively) ( Mauro et al., 2010 ).

Moreover, the young bamboo culm flour was light-colored, with a lightness (L*) higher than 80, which does not affect the coloring of the final product, according to International Organization for Standardization (2007) ; thus it can be used as fiber-rich ingredient.

4.2 Technological characterization of the cookies

Table 2 shows all technological parameters of the cookies, and Table 3 presents the coefficients generated in the response surface analysis. A significant difference was observed only for the effect of the independent variable x1 (sugar reduction) on the parameter diameter, where it was possible to observe a reduction in cookies diameter as an effect of the reduction of the sugar content of the formulation.

Table 2
Dimensions, weight loss, specific volume, moisture analysis, water activity, hardness and color parameters 1 day after the manufacture of the cookies formulations with addition of young bamboo culm flour^a.

Formulations	Dimensions (mm)		Weight loss (%)b	Specific volume (mL/g)	Moisture (g/100g)	Water activity	Hardness (N)	Color parameters
	Diameter	Thickness						L* (0=black; 100=white))		a* (+a=redness -a=greenness)		b* (+b=yellowness; -b=blueness)
F1	39.41 ± 0.81	07.60 ± 0.22	12.85 ± 0.10	2.53 ± 0.26	5.73 ± 0.05	0.47 ± 0.00	47.73 ± 1.39	69.74 ± 1.17	7.65 ± 0.27		30.89 ± 0.21
F2	36.18 ± 1.17	07.15 ± 0.68	19.36 ± 0.31	2.62 ± 0.10	4.22 ± 0.05	0.38 ± 0.00	37.80 ± 6.91	67.84 ± 1.84	5.61 ± 0.22		28.78 ± 0.57
F3	43.45 ± 1.45	10.78 ± 0.73	20.49 ± 0.27	2.90 ± 0.11	3.54 ± 0.14	0.31 ± 0.01	83.33 ± 6.50	71.78 ± 0.44	5.79 ± 0.08		29.38 ± 0.50
F4	36.01 ± 0.44	09.32 ± 0.58	18.97 ± 0.34	2.00 ± 0.11	8.00 ± 0.14	0.58 ± 0.00	77.05 ± 6.47	76.14 ± 0.62	3.90 ± 0.43		25.51 ± 0.51
F5	39.10 ± 1.28	10.69 ± 0.28	19.21 ± 0.47	2.98 ± 0.17	5.57 ± 0.06	0.45 ± 0.00	44.79 ± 4.51	71.20 ± 0.66	8.38 ± 0.77		30.88 ± 0.72
F6	36.72 ± 0.93	07.89 ± 0.34	14.14 ± 0.54	2.34 ± 0.13	8.33 ± 0.06	0.61 ± 0.00	35.17 ± 1.63	78.08 ± 0.44	2.53 ± 0.05		26.33 ± 0.16
F7	38.07 ± 0.64	09.60 ± 0.48	18.26 ± 0.31	2.39 ± 0.07	7.23 ± 0.03	0.54 ± 0.00	39.81 ± 3.27	78.08 ± 0.39	2.26 ± 0.14		25.63 ± 0.08

• ^a
  Results expressed as mean ± standard deviation; ^b Calculated b difference (raw dough weight – baked dough weight).

Table 3
Response surface analysis^a.

Parameters		Mathematical model	Mean Value	R2	p-value
Diameter		Y = 38.42 - 2.6675 x1	-	70.14	0.018
Thickness		ns	09.00	63.53	0.330
Weight loss		ns	17.61	69.73	0.255
Specific volume		ns	02.54	62.11	0.347
Moisture		ns	06.09	57.56	0.404
Water activity		ns	00.48	58.14	0.397
Hardness		ns	52.24	63.56	0.330
Color parameters	L* (0=black; 100=white)	ns	73.27	36.94	0.664
	a* (+a=redness; -a=greenness)	ns	05.16	20.63	0.851
	b* (+b=yellowness; -b=blueness)	ns	28.20	46.03	0.551

• ^a
  ns = not significant.

The formulation F3 presented the highest mean diameter (43.45 mm), that is, they exhibited a higher expansion, probably due to the 50% reduction in fat content. We observed in the present study that, for the formulation used, the effect of the reduction of the fat content was not significant in reducing the spreadability of the cookies. This fact must have occurred, due to the concentration of the sugar content, since we use the simple reduction of the fat content without replacement by another ingredient, which led to an increase in sugar concentration in the final formulation content. And according to Bertolino & Braga (2017) , the larger expansion observed on cookies may be due to the use of finer-grained sugar rather than granulated sugar, since more water is available in the formulation. They also report that variations in cookies' size may lead to adjustments in packaging by the food industry, which is designed with a maximum variation of 2%, and should be avoided due to the increase in costs.

In relation to the thickness ( Table 2 ), it increased after baking, from 5 to 10.78 mm, which was expected due to the gases produced during heating, by the decomposition of ammonium bicarbonate (ammonia and carbon dioxide). Ammonia gas is responsible for improving the expansion of the cookies by changing the protein structure due to the passage of the gas through its porous structure. The weight loss was, on average, 17%. The cookies presented an average specific volume of 2.54 mL/g, moisture content of 6.09 g/100 g, and aw of 0.48. Regarding the color parameters, the cookies were very light-colored, with values of 73.27, 5.16, 28.20 for the parameters L*, a*, and b*, respectively, corresponding to the region of light yellowish brown.

Moraes et al. (2010) also found an increase in diameter after baking of cookies containing higher sugar levels. Even without the addition of fibers to the formulations, the authors found an increase in thickness after baking, from 5 to 8.76 mm thick, weight loss of 16%, hardness around 55 N, and color parameters very close to the values observed in the present study (L*=67.63, a*=8.33, and b*=27.09).

Choudhury et al. (2015) elaborated cookies containing 0, 5, 10, and 15% bamboo shoot flour, and observed that diameter and thickness decreased after baking, for the formulations containing higher fiber levels. However, cookies were darker when compared to cookies of the present study, with L* values ranging from 54.10 to 36.31.

4.3 Selection of the cookies

The response surface analysis ( Figure 1 ) indicated significant differences in cookies' diameter only for the variable sugar reduction, once the lower the sugar content (0 to 50% reduction), the smaller the cookies' diameter (35.75 to 41.09 mm). In contrast, no significant differences were observed for the variable fat content. The results showed that it was possible to produce cookies with a reduction of 50% fat (F3), without affecting the technological characteristics.

Figure 1
Response surface analysis of the cookies with sugar and fat reduction (p<0.10).

Thus, two formulations were produced, F2 and F3, with the highest levels of sugar and fat reduction, respectively, together with a control formulation (CF), without the replacement of wheat flour by YBCF and without sugar and fat reduction ( Table 1 ), to compare the proximate composition and the technological characteristics.

The control cookies (CF) and those selected in the experimental design (F2 and F3) are shown in Figure 2 . The cookies F2 and F3 have a smaller diameter than CF (44.89 mm), which was expected due to the lower amount of ingredients that affect the cookies' expansion, such as sugar and fat.

Figure 2
Control formulation (CF) and cookies with 50% of sugar reduction (F2) and 50% of fat reduction (F3).

Regarding to the proximate composition of the selected cookies - All cookies (CF, F2, and F3) were evaluated for moisture content, lipids, protein, ash, total fiber, and digestible carbohydrates, and the results are presented in Table 4 . Low moisture values were observed for all cookies (<6 g/100 g), with the lowest values for those with sugar reduction (F2). In spite of the significant changes during the 28 days of storage and among the different cookies ( Table 5 ), the moisture content remained between 2 and 5%, which confers the characteristic crispness to the product, according to Sarantópoulos et al. (2001) .

Table 4
Proximate composition of the control (CF) and selected formulations (F2 and F3) ^a.

Formulationsb	Proximate composition (g/100 g)						Calories (kcal/100 g)
	Moisture	Lipid	Protein	Ash	Total fiber	Digestible carbohydratesc
CF	5.39 ± 0.08a	4.86 ± 0.40b	7.69 ± 0.09b	0.42 ± 0.03b	1.94 ± 0.32c	69.70	443.30
F2	4.97 ± 0.08b	8.11 ± 0.01a	8.32 ± 0.07a	0.63 ± 0.02a	7.13 ± 0.08b	60.84	439.63
F3	5.50 ± 0.06a	9.78 ± 0.14c	6.98 ± 0.01c	0.42 ± 0.05b	8.48 ± 0.12a	68.84	391.30

• ^a
  Results expressed as means ± standard deviation. Means followed by different letters in the same column differ significantly (p<0.05) by Scott-Knott test. ^bControl Formulation (CF), cookies with 50% of sugar reduction (F2) and 50% of fat reduction (F3). ^cCalculated by difference [100 – (moisture + lipid + protein + ash + total fiber)].

Table 5
Technological characterization and stability of the control (CF) and selected formulations (F2 and F3) at days 1, 7, 14, 21 and 28 after the manufacture^a.

Analysis		Formulationsb	Days
			1	7	14	21	28
Moisture (g/100 g)		CF	02.43 ± 0.04Ce	02.72 ± 0.00Cc	02.89 ± 0.13Cb	002.60 ± 0.07Cd	03.09 ± 00.05Ba
		F2	04.22 ± 0.05Aa	04.27 ± 0.04Aa	00.77 ± 0.03Ac	004.02 ± 0.04Ab	04.13 ± 00.07Ab
		F3	03.54 ± 0.14Bb	03.32 ± 0.03Bc	03.02 ± 0.04Bd	003.38 ± 0.02Bc	04.16 ± 00.02Aa
Water activity (aw)		CF	00.20 ± 0.00Cd	00.25 ± 0.00Cc	00.26 ± 0.00Cb	000.28 ± 0.00Ca	00.29 ± 00.00Ca
		F2	00.38 ± 0.00Aa	00.35 ± 0.00Ac	00.37 ± 0.00Ab	000.37 ± 0.00Ab	00.39 ± 00.00Aa
		F3	00.31 ± 0.01Bb	00.29 ± 0.00Bc	00.28 ± 0.00Bd	000.31 ± 0.00Bb	00.34 ± 00.00Ba
Hardness (N)		CF	36.27 ± 2.35Ba	30.20 ± 3.65Cb	28.80 ± 2.15Cb	025.12 ± 2.34Cc	29.93 ± 03.21Cb
		F2	36.03 ± 6.91Ba	38.14 ± 3.53Ba	39.34 ± 7.07Ba	036.37 ± 3.69Ba	42.28 ± 06.11Ba
		F3	85.30 ± 6.50Ab	87.54 ± 7.97Ab	63.06 ± 11.94Ac	110.94 ± 9.11Aa	78.85 ± 10.19Ab
Color parameters	L* (0=black; 100=white)	CF	75.08 ± 0.42Aa	73.72 ± 0.71Aa	70.37 ± 0.54Ab	075.67 ± 0.80Aa	76.64 ± 00.75Aa
		F2	67.84 ± 1.84Cc	73.73 ± 0.90Aa	71.01 ± 0.90Ab	073.82 ± 0.48Aa	75.47 ± 00.78Aa
		F3	71.78 ± 0.44Bb	75.56 ± 0.74Aa	72.45 ± 1.33Ab	075.17 ± 0.23Aa	75.05 ± 00.26Aa
	a* (+a=redness; -a=greenness)	CF	03.52 ± 0.15Bc	04.75 ± 0.29Ab	05.47 ± 0.63Aa	002.72 ± 0.13Bc	03.03 ± 00.25Cc
		F2	05.61 ± 0.22Aa	04.50 ± 0.16Ab	04.17 ± 0.20Bb	004.25 ± 0.27Ab	03.97 ± 00.05Bb
		F3	05.79 ± 0.08Aa	04.41 ± 0.12Ab	04.62 ± 0.24Bb	004.62 ± 0.02Ab	05.74 ± 00.05Aa
	b* (+b=yellowness; -b=blueness)	CF	28.16 ± 1.26Ab	29.45 ± 0.45Aa	29.63 ± 0.79Aa	026.37 ± 0.29Bc	26.12 ± 00.30Cc
		F2	28.78 ± 0.57Ab	29.96 ± 0.19Aa	28.15 ± 0.24Bb	028.84 ± 0.69Ab	28.62 ± 00.32Bb
		F3	29.38 ± 0.50Aa	28.00 ± 0.27Bb	27.70 ± 0.30Bb	028.13 ± 0.28Ab	29.80 ± 00.30Aa

• ^a
  Results expressed as means ± standard deviation. Means followed by different upper-case letters overlapped in the same column for each parameter differ significantly (p<0.05) by Scott-Knott test. Means followed by different lowercase letters overlapped in the same row, for each formulation, differ significantly (p<0.05) by Scott-Knott test. ^b Control formulation (CF), cookies with 50% of sugar reduction (F2) and 50% of fat reduction (F3).

The lower fat content was observed in F3, and differences were observed, such as higher protein and ash contents, with the addition of YBCF when compared to the CF. Significant differences were also observed for fiber contents among the formulations, with values ˃7 g/100 g for both the formulations F2 and F3, which was expected since the YBCF contained ˃70 g/100 g. In addition, cookies of the F3 formulation could be considered as a source of fiber since they presented fiber content higher than 2.5 g in a 30 g portion, as recommended by Brasil (2012) . These results corroborate the great potential of YBCF as an alternative raw material, rich in fibers. Regarding the energy value, a significant reduction in F3 was observed, which presented about 10% less calories when compared to CF and F2.

4.4 Technological characterization and stability of the selected cookies

Table 5 presents the results of the cookies after 1, 7, 14, 21, and 28 days of storage for moisture, aw, hardness, and color parameters (L*, a*, and b*).

Although an increase in moisture content was observed at the end of the storage, F2 and F3 showed a significant reduction at days 14 and 7, and 14, respectively. In addition, a higher moisture content was observed in F2 at day 1, which was observed in F3 only on the last day of storage. It is also worth mentioning that both formulations containing YBCF had a higher moisture content at the end of storage when compared to the control. Despite sugar and fat being responsible for the retention of moisture in cookies, through the results obtained for a higher moisture content in cookies made with YBCF, we observed that in this case, fiber was responsible for retaining moisture, probably due to the interaction of the bamboo fiber with other ingredients, like starch (from addition and from wheat flour).

Similar behavior was observed for Aw, with a drop from days 7 to 14, and an increase until the end of the storage, when all cookies exhibited Aw < 0.6. As reported by Clerici et al. (2013) , a lower aw is required to maintain the cookies' crispness, as observed in the formulations F2, F3, and CF. In addition, F2 presented the highest values during all the storage period, which may be due to its lower fat content. Although the lower moisture and aw values, they are in the optimum range to maintain the crispness (moisture and aw lower than 5% and 0.65, respectively), as reported by Manley (2011) .

With respect to the hardness of the cookies, a variation was observed during storage, and F3 was the formulation that presented the greatest increase in the hardness of the biscuits throughout the storage time. It happens, probably, due to the reduced fat content since it is primarily responsible for the aeration of the product. The air entrapped in the mass acts as a nucleus for the growth gases and for the release of water vapor during baking. As a result the cookies would present an increased volume, texture more uniform and soft, making the cookies more easily breakable ( Pareyt et al., 2009 ). However, despite the significant differences, a similar hardness value was observed for the reduced-sugar cookies (F2) when compared to the control.

Similar results were observed by Moraes et al. (2010) , who evaluated low-fat cookies and obtained higher tensile strength values (66.65 N) when compared to the cookies of the present study. These results reinforce the role of fat on dough lubrication and aeration, as reported by Pareyt et al. (2009) , evidencing the effect of the YBCF associated with fat reduction on the texture of the cookies, increasing the hardness of the product.

Regarding the color parameter, the cookies CF, F2, and F3 were in the region of yellowish brown. An increase in L* value was observed over time, which decreased from day 7 to 14 and subsequently increased for all cookies, with no significant differences among the formulations at the end of storage (L* = 75.72). Similar results (72.80 to 76.93) were observed by Marangoni (2007) , who partially replaced wheat flour for yacon flour and oat flakes in functional Champurrada cookies.

Although some oscillations were observed for the coordinates a* and b* during the storage, a decrease in a* value was observed, while b* values remained or decreased (CF) when compared to day 1. This result shows that although the cookies had lower intensity of red and yellow shades over time, they remained in the slightly yellowish region.

5 Conclusion

The results showed that young bamboo culm flour may be an interesting ingredient to reduce sugar in cookies, without compromising the texture characteristics of the product, besides reducing the energy value. The use of this flour also increased the nutritional contribution of fibers when compared to the control formulation, allowing to meet the consumer's demand for healthier fiber-rich products.

Acknowledgements

The authors are grateful to FAEPEX and FAPESP for the scholarship of Patricia S. E. Miyake (2016/13533-5) and for the financial support (2015/19637-4); CAPES for the support of the graduate program and for the scholarship of Mária H. F. Felisberto, CNPq and SAE/UNICAMP for the scholarship of the students who supported along the project.

• Practical Application: Young bamboo culm flour may be an alternative ingredient for healthier foods formulations.

References

• American Association of Cereal Chemists – AACCI. (2010). Approved Methods of Analysis St. Paul: AACC International.
• Associação Brasileira das Indústrias de Biscoitos, Massas Alimentícias e Pães & Bolos Industrializados – ABIMAPI. (2015). Estatísticas de Biscoitos São Paulo: ABIMAPI. Retrieved from http://www.abimapi.com.br/estatistica-biscoito.php
  » http://www.abimapi.com.br/estatistica-biscoito.php
• Association of Official Analytical Chemists – AOAC. (1998). Official methods of analysis Arlington: AOAC.
• Bertolino, M. T., & Braga, A. (2017). Ciência e tecnologia para fabricação de biscoitos - handbook do biscoiteiro (1. ed.). São Paulo: Livraria Varela/Revista Higiene Alimentar.
• Brasil. Ministério da Saúde. Agência Nacional de Vigilância Sanitária – ANVISA. (2012, Novembro 12). Dispõe sobre o Regulamento Técnico sobre Informação Nutricional Complementar (RDC nº 54, de 12 de Novembro de 2012). Diário Oficial [da] República Federativa do Brasil
• Cauvain, S., & Young, L. (2006). Baked products: science, technology and practice . Oxford: Blackwell Publishing. http://dx.doi.org/10.1002/9780470995907.
  » http://dx.doi.org/10.1002/9780470995907
• Cereda, M. P. (2003). Tecnologia, usos e potencialidades de tuberosas amiláceas latino americanas São Paulo: Fundação Cargill.
• Choudhury, M., Badwaik, L. S., Borah, P. K., Sit, N., & Deka, S. C. (2015). Influence of bamboo shoot powder fortification on physico-chemical, textural and organoleptic characteristics of biscuits. Journal of Food Science and Technology, 52(10), 6742-6748. http://dx.doi.org/10.1007/s13197-015-1709-3. PMid:26396424.
  » http://dx.doi.org/10.1007/s13197-015-1709-3
• Clerici, M. T. P. S., Oliveira, M. E., & Nabeshima, E. H. (2013). Qualidade física, química e sensorial de biscoitos tipo cookies elaborados com a substituição parcial da farinha de trigo por farinha desengordurada de gergelim. Brazilian Journal of Food Technology, 16(2), 139-146. http://dx.doi.org/10.1590/S1981-67232013005000017.
  » http://dx.doi.org/10.1590/S1981-67232013005000017
• Farris, S., & Piergiovanni, L. (2008). Effects of ingredients and process conditions on ‘Amaretti’ cookies characteristics. International Journal of Food Science & Technology, 43(8), 1395-1403. http://dx.doi.org/10.1111/j.1365-2621.2007.01648.x.
  » http://dx.doi.org/10.1111/j.1365-2621.2007.01648.x
• Farris, S., Piergiovanni, L., & Limbo, S. (2008). Effect of bamboo fibre and glucose syrup as new ingredients in the manufacture of Amaretti cookies. Italian Journal of Food Science, 20(1), 75-90.
• Feddern, V., Durante, V. V. O., Miranda, M. Z., & Salas-Mellado, M. M. (2011). Avaliação física e sensorial de biscoitos tipo cookie adicionados de farelo de trigo e arroz. Brazilian Journal of Food Technology, 14(4), 267-274. http://dx.doi.org/10.4260/BJFT2011140400032.
  » http://dx.doi.org/10.4260/BJFT2011140400032
• Felisberto, M. H. F., Miyake, P. S. E., Beraldo, A. L., & Clerici, M. T. P. S. (2017). Young bamboo culm: Potential food as source of fiber and starch. Food Research International , 101(Suppl. C), 96-102. http://dx.doi.org/10.1016/j.foodres.2017.08.058. PMid:28941702.
  » http://dx.doi.org/10.1016/j.foodres.2017.08.058
• Fox, J. D., & Robyt, J. F. (1991). Miniaturization of three carbohydrate analyses using a microsample plate reader. Analytical Biochemistry, 195(1), 93-96. http://dx.doi.org/10.1016/0003-2697(91)90300-I. PMid:1888021.
  » http://dx.doi.org/10.1016/0003-2697(91)90300-I
• Gökmen, V., Serpen, A., Açar, Ö. Ç., & Morales, F. J. (2008). Significance of furosine as heat-induced marker in cookies. Journal of Cereal Science , 48(3), 843-847. http://dx.doi.org/10.1016/j.jcs.2008.06.007.
  » http://dx.doi.org/10.1016/j.jcs.2008.06.007
• International Organization for Standardization – ISO. (2007). 6647-2: Rice: Determination of amylose content Part 2: Routine methods Geneva: ISO.
• Liese, W., & Kohl, M. (2015). Bamboo - The plant and its uses (1. ed.). Switzerland: Springer International Publishing.
• Manley, D. (2011). Manley’s technology of biscuits, crackers and cookies (4th ed.). Cambridge: Woodhead Publishing. http://dx.doi.org/10.1533/9780857093646.
  » http://dx.doi.org/10.1533/9780857093646
• Marangoni, A. L. (2007). Potencialidade de aplicação de farinha de Yacon (Polymnia sonchifolia) em produtos à base de cereais (Dissertação de mestrado). Universidade Estadual de Campinas, Campinas.
• Martins, Z. E., Pinho, O., & Ferreira, I. M. P. L. V. O. (2017). Food industry by-products used as functional ingredients of bakery products. Trends in Food Science & Technology, 67(Suppl. C), 106-128. http://dx.doi.org/10.1016/j.tifs.2017.07.003.
  » http://dx.doi.org/10.1016/j.tifs.2017.07.003
• Mauro, A. K., Silva, V. L. M., & Freitas, M. C. J. (2010). Caracterização física, química e sensorial de cookies confeccionados com Farinha de Talo de Couve (FTC) e Farinha de Talo de Espinafre (FTE) ricas em fibra alimentar. Food Science and Technology, 30(3), 719-728. http://dx.doi.org/10.1590/S0101-20612010000300024.
  » http://dx.doi.org/10.1590/S0101-20612010000300024
• Moraes, K. S., Zavareze, E. R., Miranda, M. Z., & Salas-Mellado, M. M. (2010). Avaliação tecnológica de biscoitos tipo cookie com variações nos teores de lipídio e de açúcar. Food Science and Technology , 30(1), 233-242. http://dx.doi.org/10.1590/S0101-20612010000500036.
  » http://dx.doi.org/10.1590/S0101-20612010000500036
• Pareyt, B., Talhaoui, F., Kerckhofs, G., Brijs, K., Goesaert, H., Wevers, M., & Delcour, J. A. (2009). The role of sugar and fat in sugar-snap cookies: Structural and textural properties. Journal of Food Engineering, 90(3), 400-408. http://dx.doi.org/10.1016/j.jfoodeng.2008.07.010.
  » http://dx.doi.org/10.1016/j.jfoodeng.2008.07.010
• Pereira, M. A. R., & Beraldo, A. L. (2016). Bambu de corpo e alma (2. ed.). Bauru: Canal 6.
• Perez, P. M. P., & Germani, R. (2004). Farinha mista de trigo e berinjela: características físicas e químicas. B. CEPPA, 22(1), 15-24.
• Sarantópoulos, C. I. G. L., Oliveira, L. M., & Canavesi, E. (2001). Requisitos de conservação de alimentos em embalagens flexíveis Campinas: CETEA/ITAL.
• Satya, S., Bal, L. M., Singhal, P., & Naik, S. N. (2010). Bamboo shoot processing: food quality and safety aspect (a review). Trends in Food Science & Technology , 21(4), 181-189. http://dx.doi.org/10.1016/j.tifs.2009.11.002.
  » http://dx.doi.org/10.1016/j.tifs.2009.11.002
• Satya, S., Singhal, P., Bal, L. M., & Sudhakar, P. (2012). Bamboo shoot: a potential source of food security. Mediterranean Journal of Nutrition and Metabolism , 5(1), 1-10. http://dx.doi.org/10.1007/s12349-011-0086-3.
  » http://dx.doi.org/10.1007/s12349-011-0086-3

Publication Dates

• Publication in this collection
  11 Apr 2019
• Date of issue
  Oct-Dec 2019

History

• Received
  11 Apr 2018
• Accepted
  16 Nov 2018