Acessibilidade / Reportar erro

Synthesis of 3-(1H-1,2,3-Triazol-1-yl)-2-(arylselanyl)pyridines by Copper-Catalyzed 1,3-Dipolar Cycloaddition of 2-(Arylselanyl)-3-azido-pyridines with Terminal Alkynes

Abstract

We present here our results in the synthesis of eleven new 3-(1H-1,2,3-triazol-1-yl)-2-(arylselanyl)pyridines by copper-catalyzed azide-alkyne cycloaddition reactions. The reactions were performed in the presence of catalytic amount of copper(II) acetate and sodium ascorbate using a mixture of tetrahydrofuran/water (1:1) as solvent at room temperature in air. The reaction is tolerant to different functional groups such as substituted-benzene rings, alcohol and ester and none electronic or steric influence was observed. All the products were obtained in good to excellent yields. Alternatively to the conventional oil bath heating, the use of microwave irradiation or ultrasound methods is also presented as alternative energy sources.

Keywords:
selenium; pyridine; 1,2,3-triazoles; cycloaddition reactions; copper catalysis


Introduction

Nitrogen heterocycles represent a large spectrum of compounds found in several natural and bioactive molecules.11 Katritzky, A. R.; Pozharskii, A. F.; Handbook of Heterocyclic Chemistry, 2nd ed.; Elsevier Science: Oxford, 2000; Alvarez-Builla, J.; Vaquero, J. J.; Barluenga, J.; Modern Heterocyclic Chemistry, Wiley-VCH: Weinheim, 2011, vol. 1. In this context, the heterocycles of five members containing three nitrogen atoms, well known as triazoles, are important units of this class present in several medicines worldwide consumed, as example the antifungal agents (fluconazole, itraconazole and voriconazole).22 Quin, L. D.; Tyrell, J. A. In Fundamentals of Heterocyclic Chemistry: Importance in Nature and in the Synthesis of Pharmaceuticals, Wiley: Hoboken, New Jersey, 2007, p. 196; Joule, J. A.; Mills K. In Heterocyclic Chemistry, 5th ed., Wiley: Chichester, 2010, p. 645. A great number of triazole derivatives have been synthesized and their chemistry has attracted a good deal of interest and activity from a variety of standpoints such as structure, stereochemistry, reactivity and applications to organic synthesis.33 Schulzeab, B.; Schubert, U. S.; Chem. Soc. Rev.2014, 43, 2522; Chow, H.-F.; Lau, K.-N.; Ke, Z.; Liang, Y.; Lo, C.-M.; Chem. Commun.2010, 46, 3437; Amblard, F.; Cho, J. H.; Schinazi, R. F.; Chem. Rev.2009, 109, 4207; Wim Dehaen, W.; Bakulev, V. A. In Topics in Heterocyclic Chemistry Series; Maes, B. U. W.; Cossy, J.; Polanc, S., eds.; Springer: Cham, 2015, vol. 40.; Katritzky, A. R.; Rachwal, S.; Comprehensive Heterocyclic Chemistry III; Elsevier Science: Oxford, 2008, vol. 5, p. 1. Still, their importance can be measured by the large number of publications elucidating the biological properties for new synthetic derivatives.44 For selected examples see: Donato, F.; de Gomes, M. G.; Goes, A. T. R.; Sues, N.; Alves, D.; Jesse, C. R.; Savegnago, L.; Life Sci.2013, 93, 393; Stacy, D. M.; Le Quement, S. T.; Hansen, C. L.; Clausen, J. W.; Tolker-Nielsen, T.; Brummond, J. W.; Givskov, M.; Nielsen, T. E.; Blackwell, H. E.; Org. Biomol. Chem.2013, 11, 938; Guan, Z.; Chai, X.; Yu, S.; Hu, H.; Jiang, Y.; Meng, Q.; Wu, Q.; Chem. Biol. Drug Des.2010, 76, 496; Kharb, R.; Sharma, P. C.; Yar, M. S.; J. Enzyme Inhib. Med. Chem.2011, 26, 1; Kolb, H. C.; Sharpless, K. B.; Drug Discovery Today2003, 8, 1128.

In this context, considerable effort has been applied to the development of an efficient, green, mild and relatively cheap method for the synthesis of triazoles and the copper-catalyzed azide-alkyne cycloaddition (CuAAC) definitively features a significant advance in this field, specially for 1,2,3-triazoles.55 Rostovtsev, V. V.; Green, L. G.; Fokin, V. V.; Sharpless, K. B.; Angew. Chem., Int. Ed.2002, 41, 2596; Krasinski, A.; Radic, Z.; Manetsch, R.; Raushel, J.; Taylor, P.; Sharpless, K. B.; Kolb, H. C.; J. Am. Chem. Soc.2005, 127, 6686; Lee, L. V.; Mitchell, M. L.; Huang, S.; Fokin, V. V.; Sharpless, K. B.; Wong, C.; J. Am. Chem. Soc.2003, 125, 9588; Hein, J. E.; Tripp, J. P.; Krasnova, L. B.; Sharpless, K. B.; Fokin, V. V.; Angew. Chem., Int. Ed.2009, 48, 1; Appukkuttan, P.; Mehta, V. P.; Van der Eycken, E.; Chem. Soc. Rev.2010, 39, 1467; Kappe, C. O.; Van der Eycken, E.; Chem. Soc. Rev.2010, 39, 1280; Sokolovaab, N. V.; Nenajdenko, V. G.; RSC Adv.2013, 3, 16212; Hassan, S.; Müller, T. J. J.; Adv. Synth. Catal.2015, 357, 617; Meldal, M.; Tornøe, C. W.; Chem. Rev.2008, 108, 2952; da Silva; M. T.; de Oliveira, R. N.; Valença, W. O.; Barbosa; F. C. G.; da Silva; M. G.; Camara, C. A.; J. Braz. Chem. Soc.2012, 23, 1839.

On the other hand, organoselenium compounds are a class of versatile and useful organic substrates that has emerged in recent years being subject of many reviews66 Rhoden, C. R. B.; Zeni, G.; Org. Biomol. Chem.2011, 9, 1301; Godoi, M.; Paixão, M. W.; Braga, A. L.; Dalton Trans.2011, 40, 11347; Perin, G.; Lenardão, E. J.; Jacob, R. G.; Panatieri, R. B.; Chem. Rev.2009, 109, 1277; Freudendahl, D. M.; Shahzad, S. A.; Wirth, T.; Eur. J. Org. Chem.2009, 1649; Freudendahl, D. M.; Santoro, S.; Shahzad, S. A.; Santi, C.; Wirth, T.; Angew. Chem., Int. Ed.2009, 48, 8409; Braga, A. L.; Lüdtke, D. S.; Vargas, F.; Curr. Org. Chem.2006, 10, 1921; Santoro, S.; Azeredo, J. B.; Nascimento, V.; Sancineto, L.; Braga, A. L.; Santi, C.; RSC Adv.2014, 4, 31521; Santi, C.; Tidei, C.; Scalera, C.; Piroddi, M.; Galli, F.; Curr. Chem. Biol.2013, 7, 25. and books.77 Wirth, T.; Top. Curr. Chem.2000, 208, 1; Devillanova, F. A.; Handbook of Chalcogen Chemistry: New Perspectives in Sulfur, Selenium and Tellurium, RSC: Cambridge, 2006; Alberto, E. E.; Braga, A. L. In Selenium and Tellurium Chemistry: From Small Molecules to Biomolecules and Materials; Derek, W. J.; Risto, L., eds.; Springer: Berlin, 2011, pp. 285; Wirth, T. Organoselenium Chemistry: Synthesis and Reactions; Wiley-VCH Verlag GmbH & Co. KGaA: Weinheim, 2011; Santi, C.; Organoselenium Chemistry between Synthesis and Biochemistry; Bentham Science Publishers: Bussum, 2014. These compounds are well known as precursors to introduce an unsaturated carbon-carbon bond on organic molecules by an intramolecular syn elimination of selenoxide in oxidant media,88 Sharpless, K. B.; Young, M. W.; Lauer, R. F.; Tetrahedron Lett.1973, 1979; Kondo, N.; Fueno, H.; Fujimoto, H.; Makino, M.; Nakaoka, H.; Aoki, I.; Uemura, S.; J. Org. Chem.1994, 59, 5254. firstly described by Jones et al. in 1970.99 Jones, D. N.; Mundy, D.; Whitehouse, R. D.; J. Chem. Soc., Chem. Commun.1970, 86. However, in recent years, organic selenium compounds have been used in an increased spectrum of applications in organic synthesis such as ionic liquids1010 Kim, H. S.; Kim, Y. J.; Lee, H.; Park, K. Y.; Lee, C.; Chin, C. S.; Angew. Chem., Int. Ed.2002, 41, 4300; Thurow, S.; Pereira, V. A.; Martinez, D. M.; Alves, D.; Perin, G.; Jacob, R. G.; Lenardão, E. J.; Tetrahedron Lett.2011, 52, 640; Alberto, E. E.; Rossato, L. L.; Alves, S. H.; Alves, D.; Braga, A. L.; Org. Biomol. Chem.2011, 9, 1001. and asymmetric catalysis.66 Rhoden, C. R. B.; Zeni, G.; Org. Biomol. Chem.2011, 9, 1301; Godoi, M.; Paixão, M. W.; Braga, A. L.; Dalton Trans.2011, 40, 11347; Perin, G.; Lenardão, E. J.; Jacob, R. G.; Panatieri, R. B.; Chem. Rev.2009, 109, 1277; Freudendahl, D. M.; Shahzad, S. A.; Wirth, T.; Eur. J. Org. Chem.2009, 1649; Freudendahl, D. M.; Santoro, S.; Shahzad, S. A.; Santi, C.; Wirth, T.; Angew. Chem., Int. Ed.2009, 48, 8409; Braga, A. L.; Lüdtke, D. S.; Vargas, F.; Curr. Org. Chem.2006, 10, 1921; Santoro, S.; Azeredo, J. B.; Nascimento, V.; Sancineto, L.; Braga, A. L.; Santi, C.; RSC Adv.2014, 4, 31521; Santi, C.; Tidei, C.; Scalera, C.; Piroddi, M.; Galli, F.; Curr. Chem. Biol.2013, 7, 25.,1111 Braga, A. L.; Ludtke, D. S.; Vargas, F.; Braga, R. C.; Synlett2006, 1453; Braga, A. L.; Vargas, F.; Sehnem, J. A.; Braga, R. C.; J. Org. Chem.2005, 70, 9021; Braga, A. L.; Paixão, M. W.; Ludtke, D. S.; Silveira, C. C.; Rodrigues, O. E. D.; Org. Lett.2003, 5, 2635; Braga,A. L.; Paixão, M. W.; Marin, G.; Synlett2005, 1975; Braga, A. L.; Rodrigues, O. E. D.; Paixão, M. W.; Appelt, H. R.; Silveira, C. C.; Bottega, D. P.; Synthesis2002, 2338. Moreover, organoselenium compounds are widely studied as agents with a diverse array of biological effects, these include antioxidant action, antitumoral, anticonvulsant, hepatoprotective and antinociceptive.1212 Victoria, F. N.; Anversa, R.; Penteado, F.; Castro, M.; Lenardão, E. J.; Savegnago, L.; Eur. J. Pharmacol.2014, 742, 131; Schumacher, R. F.; Rosário, A. R.; Souza, A. C. G.; Acker, C. I.; Nogueira, C. W.; Zeni, G.; Bioorg. Med. Chem.2011, 19, 1418; Nogueira, C. W.; Rocha, J. B.; Arch. Toxicol.2011, 85, 1313; Naithani, R.; Mini-Rev. Med. Chem.2008, 8, 657; Shiah, H.-S.; Lee, W.-S.; Juang, S.-H.; Hong, P.-C.; Lung, C.-C.; Chang, C.-J.; Chou, K.-M.; Chang, J.-Y.; Biochemical Pharmacol.2007, 73, 610; Soriano-Garcia, M.; Curr. Med. Chem.2004, 11, 1657; May, S. W.; Expert Opin. Invest. Drugs2002, 11, 1261.

With this background, the synthesis of selenium-containing 1,2,3-triazoles1313 Seus, N.; Saraiva, M. T.; Alberto, E. E.; Savegnago, L.; Alves, D.; Tetrahedron2012, 68, 10419; Deobald, A. M.; Camargo, L. R. S.; Hörner, M.; Rodrigues, O. E. D.; Alves, D.; Braga, A. L.; Synthesis2011, 2397. emerged as an opportunity for research, which combines the potentiality of triazoles with the organoselenium portion. Very recently, some CuAAC protocols were reported for the synthesis of organoselenium-functionalized triazoles in excellent yields under mild reaction conditions.1313 Seus, N.; Saraiva, M. T.; Alberto, E. E.; Savegnago, L.; Alves, D.; Tetrahedron2012, 68, 10419; Deobald, A. M.; Camargo, L. R. S.; Hörner, M.; Rodrigues, O. E. D.; Alves, D.; Braga, A. L.; Synthesis2011, 2397. However, a synthetic approach, which could incorporate to these molecules another synthetic and biological important unit, the pyridine, has not to be published so far. Realizing the importance of this research, we described here a synthetic methodology to the synthesis of 3-(1H-1,2,3-triazol-1-yl)-2-(arylselanyl)pyridines combining organoselenides, pyridines and triazoles on the same molecule.

Results and Discussion

Initially, our study was focused on preparing the starting materials, 2-phenylselanyl-3-azido-pyridines 4a (Scheme 1). The treatment of 3-amino-2-chloro-pyridine 2, commercially available, with benzeneselenol generated in situ by the reaction of diphenyl diselenide 1a with hipophosporous acid (50 wt.% in H2O) as reducing agent in glycerol gave de 3-amino-2-phenylselanylpyridine 3a in 95% yield.1414 Thurow, S.; Webber, R.; Perin, G.; Lenardão, E. J.; Alves, D.; Tetrahedron Lett. 2013, 54, 3215. Using the pyridine 3a in the presence of isopentyl nitrite and trimethylsilyl azide (TMSN3) in tetrahydrofuran (THF) from 0 ºC to room temperature,1515 Deobald, A. M.; Camargo, L. R. S.; Tabarelli, G.; Hörner, M.; Rodrigues, O. E. D.; Alves, D.; Braga, A. L.; Tetrahedron Lett.2010, 51, 3364. the expected 3-azido-2-phenylselanylpyridine 4a could be obtained in 90% yield after 3 h (Scheme 1).

Scheme 1
Synthetic route to obtain the starting material 4a.

By using the methodology described above, six new 3-azido-pyridines 4 containing differently substituted arylselanyl moieties were easily obtained in good yields and these compounds are presented in Table 1.

Table 1
Synthesis of the starting materials 4a-f

With these starting materials in hand, we envisioned to obtain the 3-(1H-1,2,3-triazol-1-yl)-2-(arylselanyl) pyridines 6 as the desired products. In view of our expertise in recent publications on this field, we decided to employ the azides 4 on copper-catalyzed azide-alkyne cycloaddition reaction (CuAAC) using sodium ascorbate as reducer agent in a mixture of THF/H2O as solvent in air.1313 Seus, N.; Saraiva, M. T.; Alberto, E. E.; Savegnago, L.; Alves, D.; Tetrahedron2012, 68, 10419; Deobald, A. M.; Camargo, L. R. S.; Hörner, M.; Rodrigues, O. E. D.; Alves, D.; Braga, A. L.; Synthesis2011, 2397.

As a preliminary experiment we reacted the 3-azido-2-phenylselanyl-pyridine 4a with phenyl acetylene 5a in the presence of 5 mol% of Cu(OAc)2.H2O and 10 mol% of sodium ascorbate and the desired triazole 6a was obtained in 90% yield after 6 h at room temperature (Scheme 2).

Scheme 2
Synthesis of 3-(1H-1,2,3-triazol-1-yl)-2-(phenylselanyl) pyridine 6a.

In accordance with this good result, the methodology was then extended to the synthesis of a range of 3-(1H-1,2,3- triazol-1-yl)-2-(arylselanyl)pyridines 6 using as starting materials the 3-azido pyridines 4a-f previously described and commercially available terminal alkynes 5a-f (Table 2).

Table 2
Synthesis of 3-(1H-1,2,3-triazol-1-yl)-2-(arylselanyl) pyridines 6a-ka

Inspection of Table 2 shows that the reaction worked well for a variety of differently substituted alkynes 5 and different arylselenides directly attached to the pyridine ring 4. A closer inspection of the results revealed that the reaction is not sensitive to the electronic effects in alkynes 5. A wide range of groups attached to the alkynes such as electron rich, -neutral and -poor reacted efficiently with the 3-azido-2-(phenylselanyl)pyridine 4a under these conditions and produced the functionalized 1,2,3-triazoles 6a-d as products in moderate to good yields. For example, alkynes containing p-methyl, p-methoxy or p-chloro groups afforded the desired products in 90, 75 and 80% yield, respectively (Table 2, entries 2-4). We also observed that the reaction is tolerant to different functional groups directly attached to the alkyne, for example ester 5e and alcohol 5f, which gave the expected triazoles 6e and 6f, respectively, in good yields (Table 2, entries 5 and 6).

In an attempt to broaden the scope of our methodology, the possibility of performing the reaction with other 2-(arylselanyl)-3-azido-pyridines was also investigated. As illustrated in Table 2, the CuAAC reaction of 4b-f with phenyl acetylene 5a, under the same reaction conditions, led to the corresponding triazole products 6g-k in good to excellent yields (Table 2, entries 7-11).

The use of different 2-(arylselanyl)-3-azido-pyridines 4b-f, containing electron-donating and withdrawing groups afforded the required products in satisfactory yields, demonstrating that the reaction is not sensitive to the electronic effect of the aromatic ring attached to the selenium atom (Table 2, entries 7-10). Comparing the entries 7 and 11 (Table 2), we realized that when the aryl selenide 4f bearing an ortho-methyl group was used, no steric influence in the formation of the desired product 6k is perceived in this cycloaddition reaction.

The use of an internal alkyne, the 1,2-diphenyl acetylene 5g, was also investigated under the optimal reaction condition, but after 24 h no product could be observed and the starting materials were quantitatively recovered (Table 2, entry 12).

Finally, in order to explore this CuAAC reaction between phenyl acetylene 5a and the 2-(phenylselanyl)- 3-azido-pyridine 4a envisioning the possibility to obtain the product 6a in a shorter reaction time and using cleaner methods, we performed the reaction employing focused microwave irradiation (using an irradiation power of 100 W) and ultrasound conditions (60% of amplitude) (Scheme 3). Results presented in Scheme 3 revealed that under both non-classical methods, the product 6a could be obtained in excellent yields after only 10 min, demonstrating the efficient use of alternative energy sources to this synthesis.

Scheme 3
The use of alternative non-classical energy sources.

Conclusions

In summary, we presented the synthesis of a series of new 3-(1H-1,2,3-triazol-1-yl)-2-(arylselanyl)pyridines 6 by copper-catalyzed azide-alkyne cycloaddition between 3-azido-2-arylselanyl-pyridines 4 and terminal alkynes 5. The reaction conditions are simple and mild, employing easy handle and available catalytic amount of copper(II) acetate and sodium ascorbate, using THF/H2O as solvent in air. The reaction does not show to suffer steric or electronic influence of the substituents of the aryl selenide 4 or at the alkyne 5 and all products were obtained in good to excellent yields. These molecules comprise a new class of organoselenium-substituted triazole compounds that associated to pyridine moieties are plausible candidates to present potent pharmacological properties.

Experimental

Materials and methods

Proton nuclear magnetic resonance spectra (1H NMR) were obtained at 400 MHz on a DPX-400 NMR spectrometer. Carbon-13 nuclear magnetic resonance spectra (13C NMR) were obtained at 100 MHz on a DPX-400 NMR spectrometer. Spectra were recorded in CDCl3 or DMSO-d6 solutions. Chemical shifts are reported in ppm, referenced to the solvent peak of CDCl3, DMSO-d6 or tetramethylsilane (TMS) as the external reference. Data are reported as follows: chemical shift (δ), multiplicity, coupling constant (J) in Hertz and integrated intensity. Low-resolution mass spectra were obtained with a Shimadzu GC-MS-QP2010 mass spectrometer. High resolution mass spectra (HRMS) were recorded on a Bruker Micro TOF-QII spectrometer 10416. A Cole Parmer-ultrasonic processor Model CPX 130, with a maxim power of 130 W, operating at amplitude of 60% and a frequency of 20 kHz was used in Scheme 3. A Microwave CEM Discover Legacy apparatus, with magnetic frequency of 2.45 MHz and power of 300 W, operating at 50 ºC, was used in Scheme 3. Baker silica gel (particle size 0.040-0.063 mm) was used for flash chromatography. Thin layer chromatography (TLC) was performed using Merck Silica Gel GF254, 0.25 mm thickness. For visualization, TLC plates were either placed under ultraviolet light, or stained with iodine vapor, or 5% vanillin in 10% H2SO4 and heat as developing agents. Most reactions were monitored by TLC for disappearance of starting material.

General procedure for the preparation of 3-azido-2-arylselanylpyridine 4

To a solution of 3-amino-2-arylselanylpyridine 3 (1.0 mmol) in THF (2.0 mL), iso-pentyl nitrite (1.15 mmol) followed by trimethylsilyl azide (1.15 mmol) was added drop by drop at 0 ºC under air. Then the mixture was stirred at 0 ºC for 10 min, the ice bath was removed, and the mixture was stirred at room temperature for 6 h. The solvent was removed under vacuum and the product was isolated by column chromatography using hexane or hexane/ethyl acetate as eluent.

3-Azido-2-(phenylselanyl)pyridine (4a)

Yield: 0.238 g (87%); brown solid; m.p. 54-59 ºC; 1H NMR (400 MHz, CDCl3) δ 7.99 (d, 1H, J 3.6 Hz, Ar-H), 7.53-7.51 (m, 2H, Ar-H), 7.25-7.21 (m, 3H, Ar-H), 7.12 (d, 1H, J 7.8 Hz, Ar-H), 6.92 (dd, 1H, J 7.8, 4.8 Hz, Ar-H); 13C NMR (100 MHz, CDCl3) δ 148.4, 146.1, 136.0, 135.4, 128.9, 128.3, 126.8, 124.1, 121.1; MS m/z (rel. int.): 275 (3), 177 (16), 168 (30), 149 (12), 97 (17), 77 (20), 43 (100); HRMS (ESI+) m/z calcd. for C11H8N4Se [M + H]+: 276.9987; found: 276.9991.

3-Azido-2-(p-tolylselanyl)pyridine (4b)

Yield: 0.233 g (81%); brown solid; m.p. 47-49 ºC; 1H NMR (400 MHz, CDCl3) δ 8.04 (dd, 1H, J 4.7, 1.3 Hz, Ar-H), 7.43 (d, 2H, J 7.9 Hz, Ar-H), 7.18 (dd, 1H, J 7.9, 1.3 Hz, Ar-H), 7.08 (d, 2H, J 7.9 Hz, Ar-H), 6.97 (dd, 1H, J 7.9, 4.7 Hz, Ar-H), 2.27 (s, 3H, CH3); 13C NMR (100 MHz, CDCl3) δ 148.9, 146.3, 138.6, 136.6, 135.3, 130.0, 124.0, 123.0, 121.0, 21.2; MS m/z (rel. int.): 290 (11), 247 (31), 182 (54), 171 (39), 91(100); HRMS (ESI+) m/z calculated for C12H10N4Se [M + H]+: 291.0143; found: 391.0164.

3-Azido-2-((4-methoxyphenyl)selanyl)pyridine (4c)

Yield: 0.261 g (86%); yellow solid; m.p. 75-77 ºC; 1H NMR (400 MHz, CDCl3) δ 8.00 (dd, 1H, J 4.7, 1.4 Hz, Ar-H), 7.44 (dt, 2H, J 8.8, 2.0 Hz, Ar-H), 7.14 (dd, 1H, J 7.9, 1.4 Hz, Ar-H), 6.94 (dd, 1H, J 7.9, 4.7 Hz, Ar-H), 6.79 (dd, 2H, J 8.8, 2.0 Hz, Ar-H), 3.69 (s, 3H, CH3); 13C NMR (100 MHz, CDCl3) δ 160.2, 149.2, 146.4, 138.1, 135.2, 124.0, 120.9, 116.9, 114.9, 55.2; MS m/z (rel. int.): 306 (1), 178 (100), 161 (49), 123 (18), 69 (64), 55 (26); HRMS (ESI+) m/z calcd. for C12H10N4OSe [M + H]+: 307.0093; found: 307.0097.

3-Azido-2-((4-chlorophenyl)selanyl)pyridine (4d)

Yield: 0.298 g (97%); violet solid; m.p. 56-60 ºC; 1H NMR (400 MHz, CDCl3) δ 8.05 (dd, 1H, J 4.7, 1.4 Hz, Ar-H), 7.48 (dd, 2H, J 8.5, 1.9 Hz, Ar-H), 7.24 (dd, 2H, J 8.5, 1.9 Hz, Ar-H), 7.22 (dd, 1H, J 7.9, 1.4 Hz, Ar-H), 7.02 (dd, 1H, J 7.9, 4.7 Hz, Ar-H); 13C NMR (100 MHz, CDCl3) δ 148.0, 146.3, 137.5, 135.5, 134.9, 129.2, 125.0, 124.2, 121.3; MS m/z (rel. int.): 310 (16), 282 (20), 247 (75), 202 (84), 190 (100), 156 (72), 145 (64), 75 (46).

3-Azido-2-((4-fluorophenyl)selanyl)pyridine (4e)

Yield: 0.251 g (86%); brown solid; m.p. 58-62 ºC; 1H NMR (400 MHz, CDCl3) δ 8.15 (dd, 1H, J 4.7, 1.4 Hz, Ar-H), 7.66-7.61 (m, 2H, Ar-H), 7.32 (dd, 1H, J 7.9, 1.4 Hz, Ar-H), 7.12 (dd, 1H, J 7.9, 4.7 Hz, Ar-H), 7.11-7.06 (m, 2H, Ar-H); 13C NMR (100 MHz, CDCl3) δ 163.1 (d, J 248.4 Hz), 148.4, 146.3, 138.5 (d, J 8.1 Hz), 135.3, 124.1, 121.3 (d, J 3.3 Hz), 121.2, 116.4 (d, J 21.7 Hz); MS m/z (rel. int.): 294 (10), 186 (100), 174 (73), 145 (32), 95 (24), 83 (38); HRMS (ESI+) m/z calcd. for C11H7FN4Se [M + H]+: 294.9893; found: 294.9893.

3-Azido-2-(o-tolylselanyl)pyridine (4f)

Yield: 0.224 g (78%); brownish solid; m.p. 82-85 ºC; 1H NMR (400 MHz, CDCl3) δ 8.00 (dd, 1H, J 4.7, 1.4 Hz, Py-H), 7.54 (d, 1H, J 7.4 Hz, Ar-H), 7.20-7.22 (m, 2H, Ar-H), 7.18 (dd, 1H, J 7.9, 1.4 Hz, Py-H), 7.08-7.02 (m, 1H, Ar-H), 6.95 (dd, 1H, J 7.9, 4.7 Hz, Py-H), 2.30 (s, 3H, CH3); 13C NMR (100 MHz, CDCl3) δ 148.5, 146.3, 145.1, 137.4, 130.1, 129.3, 127.7, 126.4, 124.0, 123.1, 120.9, 22.8; MS m/z (rel. int.): 290 (4), 178 (64), 161 (33), 123 (30), 97 (42), 71 (55), 69 (91), 57 (100).

General procedure for the preparation of 3-(1H-1,2,3-triazol-1-yl)-2-(arylselanyl)pyridines 6

To a solution of 3-azido-2-arylselanylpyridine 4 (0.30 mmol) in THF (0.50 mL), the terminal alkyne 5 (0.33 mmol) and distilled water (0.50 mL) were added. Then the sodium ascorbate (0.006 g, 10 mol%) and Cu(OAc)2.H2O (0.003 g, 5 mol %) were added and the mixture was stirred under air for the desired time, monitored by TLC. Brine solution (3.0 mL) was added and the mixture was extracted with methylene chloride (3 × 5.0 mL). The organic layers were combined, washed with brine (3.0 mL) and dried with MgSO4. The solvent was removed under vacuum and the product was isolated by column chromatography using hexane/ethyl acetate as eluent.

3-(4-Phenyl-1H-1,2,3-triazol-1-yl)-2-(phenylselanyl)pyridine (6a)

Yield: 0.101 g (90%); white solid; m.p. 171-175 ºC; 1H NMR (400 MHz, DMSO-d6) δ 9.05 (s, 1H, *Tr-H), 8.53 (dd, 1H, J 4.7, 1.6 Hz, Py-H), 8.05 (dd, 1H, J 7.9, 1.6 Hz, Py-H), 7.97-7.95 (m, 2H, Ar-H), 7.58-7.55 (m, 2H, Ar-H), 7.53-7.49 (m, 2H, Ar-H), 7.49 (dd, 1H, J 7.9, 4.7 Hz, Py-H), 7.42-7.34 (m, 4H, Ar-H); 13C NMR (100 MHz, DMSO-d6) δ 151.5, 150.4, 146.9, 135.4, 132.9, 132.8, 129.7, 128.8, 128.6, 128.3, 128.0, 127.4, 125.2, 122.4, 121.5; MS m/z (rel. int.): 378 (1), 348 (81), 272 (77), 269 (48), 193 (100), 167 (30), 77 (44), 69 (61); HRMS (ESI+) m/z calcd. for C19H14N4Se [M + H]+: 379.0456; found: 379.0468. *Tr-H: triazole hydrogen.

2-(Phenylselanyl)-3-(4-(p-tolyl)-1H-1,2,3-triazol-1-yl) pyridine (6b)

Yield: 0.105 g (90%); white solid; m.p. 199-201 ºC; 1H NMR (400 MHz, CDCl3) δ 8.47 (d, 1H, J 4.7 Hz, Py-H), 8.08 (s, 1H, Tr-H), 7.78 (d, 2H, J 7.9 Hz, Ar-H), 7.69 (d, 1H, J 7.8 Hz, Py-H), 7.57-7.56 (m, 2H, Ar-H), 7.34-7.23 (m, 5H, Ar-H), 7.22 (dd, 1H, J 7.8, 4.7 Hz, Py-H), 2.39 (s, 3H, CH3); 13C NMR (100 MHz, CDCl3) δ 153.1, 150.7, 148.4, 138.4, 135.9, 133.8, 132.8, 129.6, 129.1, 128.7, 127.5, 127.3, 125.9, 121.1, 120.4, 21.2; MS m/z (rel. int.): 392 (1), 363 (64), 287 (100), 285 (55), 271 (50), 207 (68), 180 (25), 115 (44), 77 (50); HRMS (ESI+) m/z calcd. for C20H16N4Se [M + H]+: 393.0613; found: 393.0608.

3-(4-(4-Methoxyphenyl)-1H-1,2,3-triazol-1-yl)-2-(phenylselanyl)pyridine (6c)

Yield: 0.091 g (75%); white solid; m.p. 160-163 ºC; 1H NMR (400 MHz, CDCl3) δ 8.44 (dd, 1H, J 4.7, 1.5 Hz, Py-H), 8.04 (s, 1H, Tr-H), 7.81 (d, 2H, J 8.8 Hz, Ar-H), 7.66 (dd, 1H, J 7.8, 1.5 Hz, Py-H), 7.56-7.54 (m, 2H, Ar-H), 7.33-7.27 (m, 3H, Ar-H), 7.21 (dd, 1H, J 7.8, 4.7 Hz, Py-H), 6.97 (d, 2H, J 8.8Hz, Ar-H), 3.83 (s, 3H, CH3); 13CNMR (100MHz, CDCl3) δ 159.9, 153.0, 150.7, 148.1, 135.9, 133.5, 132.7, 129.1, 128.7, 127.3, 127.2, 122.5, 121.0, 119.9, 114.3, 55.3; MS m/z (rel. int.): 408 (1), 302 (100), 271 (21), 223 (46), 208 (17), 179 (11), 77 (25); HRMS (ESI+) m/z calcd. for C20H16N4OSe [M + H]+: 409.0562; found: 409.0567.

3-(4-(4-Chlorophenyl)-1H-1,2,3-triazol-1-yl)-2-(phenylselanyl)pyridine (6d)

Yield: 0.098 g (80%); white solid; m.p. 194-196 ºC; 1H NMR (400 MHz, CDCl3) δ 8.46 (dd, 1H, J 4.6, 1.2 Hz, Py-H), 8.11 (s, 1H, Tr-H), 7.82 (d, 2H, J 8.4 Hz, Ar-H), 7.68 (dd, 1H, J 7.8, 1.2 Hz, Ar-H), 7.56-7.45 (m, 2H, Ar-H), 7.41 (d, 1H, J 8.4 Hz, Py-H), 7.34-7.27 (m, 3H, Ar-H), 7.22 (dd, 1H, J 7.8, 4.7 Hz, Py-H); 13C NMR (100 MHz, CDCl3) δ 153.0, 150.8, 147.2, 135.8, 134.4, 133.6, 132.9, 129.2, 129.1, 128.7, 128.6, 127.3, 127.2, 121.1, 120.9; MS m/z (rel. int.): 412 (2), 383 (87), 306 (63), 272 (100), 192 (60), 115 (34), 77 (63); HRMS (ESI+) m/z calcd. for C19H13ClN4Se [M + H]+: 413.0067; found: 413.0071.

Ethyl 1-(2-(phenylselanyl)pyridin-3-yl)-1H-1,2,3-triazole-4-carboxylate (6e)

Yield: 0.078 g (70%); pale yellow solid; m.p. 110-114 ºC; 1H NMR (400 MHz, CDCl3) δ 8.43 (dd, 1H, J 4.7, 1.6 Hz, Py-H), 8.38 (s, 1H, Tr-H), 7.61 (dd, 1H, J 7.8, 1.6 Hz, Py-H), 7.47-7.44 (m, 2H, Ar-H), 7.30-7.22 (m, 3H, Ar-H), 7.20 (dd, 1H, J 7.8, 4.7 Hz, Py-H), 4.39 (q, 2H, J 7.1 Hz, CH2), 1.36 (t, 3H, J 7.1 Hz, CH3); 13C NMR (100 MHz, CDCl3) δ 160.2, 153.1, 151.3, 140.5, 135.7, 133.2, 132.8, 129.2, 128.9, 128.8, 126.7, 121.2, 61.4, 14.2; MS m/z (rel. int.): 374 (21), 345 (35), 300 (24), 273 (85), 269 (100), 240 (33), 193 (91), 154 (44), 115 (47), 91 (97), 77 (91); HRMS (ESI+) m/z calcd. for C16H14N4O2Se [M + H]+: 375.0355; found: 375.0351.

2-(1-(2-(Phenylselanyl)pyridin-3-yl)-1H-1,2,3-triazol-4-yl) propan-2-ol (6f)

Yield: 0.064 g (60%); white solid; m.p. 146-149 ºC; 1H NMR (400 MHz, CDCl3) δ 8.36 (d, 1H, J 4.7 Hz, Py-H), 7.8 (s, 1H, Tr-H), 7.56 (d, 1H, J 7.6 Hz, Py-H), 7.45 (d, 2H, J 6.6 Hz, Ar-H), 7.27-7.18 (m, 3H, Ar-H), 7.12 (dd, 1H, J 7.6, 4.7 Hz, Py-H), 2.9 (s, 1H, OH), 1.6 (s, 6H, 2(CH3)); 13C NMR (100 MHz, CDCl3) δ 156.1, 152.9, 150.6, 135.7, 133.5, 132.7, 129.1, 128.6, 127.3, 121.0, 120.6, 68.5, 30.4; MS m/z (rel. int.): 360 (1), 195 (10), 178 (100), 161 (51), 123 (21), 69 (70), 57 (63); HRMS (ESI+) m/z calcd. for C16H16N4OSe [M + H]+: 361.0562; found: 361.0566.

3-(4-Phenyl-1H-1,2,3-triazol-1-yl)-2-(p-tolylselanyl)pyridine (6g)

Yield: 0.091 g (78%); brownish solid; m.p. 159-160 ºC; 1H NMR (400 MHz, CDCl3) δ 8.36 (dd, 1H, J 4.7, 1.5 Hz, Py-H), 8.04 (s, 1H, Tr-H), 7.81 (d, 2H, J 7.6 Hz, Ar-H), 7.57 (dd, 1H, J 7.8, 1.5 Hz, Py-H), 7.37-7.34 (m, 4H, Ar-H), 7.29-7.25 (m, 1H, Ar-H), 7.11 (dd, 1H, J 7.8, 4.7 Hz, Py-H), 7.02 (d, 2H, J 7.6 Hz, Ar-H), 2.23 (s, 3H, CH3); 13C NMR (100 MHz, CDCl3) δ 153.4, 150.7, 148.0, 138.9, 136.0, 133.2, 132.7, 130.0, 129.8, 128.8, 128.5, 125.8, 123.3, 120.9, 120.8, 21.2. MS m/z (rel. int.): 382 (9), 363 (40), 193 (47), 127 (28), 81 (42), 69 (91), 57 (100); HRMS (ESI+) m/z calcd. for C20H16N4Se [M + H]+: 393.0613; found: 393.0607.

2-((4-Methoxyphenyl)selanyl)-3-(4-phenyl-1H-1,2,3-triazol-1-yl)pyridine (6h)

Yield: 0.104 g (86%); white solid; m.p. 166-169 ºC; 1H NMR (400 MHz, CDCl3) δ 8.36 (dd, 1H, J 4.5, 1.4 Hz, Py-H), 8.03 (s, 1H, Tr-H), 7.81 (d, 2H, J 7.8 Hz, Ar-H), 7.56 (dd, 1H, J 7.9, 1.4 Hz, Py-H), 7.39-3.34 (m, 4H, Ar-H), 7.29-7.25 (m, 1H, Ar-H), 7.11 (dd, 1H, J 7.9, 4.5 Hz, Py-H), 6.74 (d, 2H, J 7.8 Hz, Ar-H), 3.67 (s, 3H, CH3); 13C NMR (100 MHz, CDCl3) δ 160.4, 153.7, 150.6, 148.1, 137.8, 133.3, 132.7, 130.1, 128.8, 128.4, 125.9, 120.8, 120.7, 117.5, 114.9, 55.1; MS m/z (rel. int.): 408 (9), 378 (97), 299 (43), 273 (58), 193 (100), 166 (47), 141 (43), 89 (41), 63 (40); HRMS (ESI+) m/z calcd. for C20H16N4OSe [M + H]+: 409.0557; found: 409.0540.

2-((4-Chlorophenyl)selanyl)-3-(4-phenyl-1H-1,2,3-triazol-1-yl)pyridine (6i)

Yield: 0.119 g (97%); white solid; m.p. 138-142 ºC; 1H NMR (400 MHz, CDCl3) δ 8.38 (dd, 1H, J 4.6, 1.5 Hz, Py-H), 8.05 (s, 1H, Tr-H), 7.82 (d, 2H, J 7.1 Hz, Ar-H), 7.61 (dd, 1H, J 7.8, 1.5 Hz, Py-H), 7.42-7.35 (m, 4H, Ar-H), 7.31-7.27 (m, 1H, Ar-H), 7.21-7.17 (m, 2H, Ar-H), 7.16 (dd, 1H, J 7.8, 4.6 Hz, Py-H); 13C NMR (100 MHz, CDCl3) δ 152.7, 150.7, 148.3, 137.4, 135.2, 133.2, 132.6, 129.7, 129.3, 128.9, 128.6, 125.9, 125.3, 121.1, 120.5; MS m/z (rel. int.): 412 (1), 382 (40), 273 (37), 193 (59), 166 (22), 111 (21), 69 (100); HRMS (ESI+) m/z calcd. for C19H13ClN4Se [M + H]+: 413.0067; found: 413.0059.

2-((4-Fluorophenyl)selanyl)-3-(4-phenyl-1H-1,2,3-triazol-1-yl)pyridine (6j)

Yield: 0.101 g (86%); yellow solid; m.p. 157-160 ºC; 1H NMR (400 MHz, CDCl3) δ 8.36 (dd, 1H, J 4.7, 1.5 Hz, 1H), 8.05 (s, 1H, Tr-H), 7.83-7.80 (m, 2H, Ar-H), 7.59 (dd, 1H, J 7.8, 1.5 Hz, Py-H), 7.48-7.44 (m, 2H, Ar-H), 7.38-7.34 (dd, 2H, J 7.8, 1.2 Hz, Ar-H), 7.28 (dd, 1H, J 7.8, 1.2 Hz, Ar-H), 7.14 (dd, 1H, J 7.8, 4.7 Hz, Py-H); 13C NMR (100 MHz, CDCl3) δ 163.2 (d, J 249.2 Hz), 152.9, 150.6, 148.3, 138.3 (d, J 8.2 Hz), 133.2, 132.5, 129.8, 128.9, 128.5, 125.9, 121.8 (d, J 3.4 Hz), 121.0, 120.6, 116.3 (d, J 21.6 Hz); MS m/z (rel. int.): 396 (1), 367 (74), 287 (29), 273 (61), 193 (100), 166 (25), 89 (28); HRMS (ESI+) m/z calcd. for C19H13FN4Se [M + H]+: 397.0362; found: 397.0355.

3-(4-Phenyl-1H-1,2,3-triazol-1-yl)-2-(o-tolylselanyl)pyridine (6k)

Yield: 0.091 g (78%); white solid; m.p. 177-181 ºC; 1H NMR (400 MHz, CDCl3) δ 8.39 (dd, 1H, J 4.6, 1.5 Hz, Py-H), 8.08 (s, 1H, Tr-H), 7.84 (d, 2H, J 7.4 Hz, Ar-H), 7.63 (dd, 1H, J 7.8, 1.5 Hz, Py-H), 7.49 (d, 1H, J 7.4 Hz, Ar-H), 7.39 (t, 2H, J 7.4 Hz, Ar-H), 7.30 (t, 1H, J 7.4 Hz, Ar-H), 7.23-7.15 (m, 2H, Ar-H), 7.15 (dd, 1H, J 7.8, 4.6 Hz, Py-H), 7.06-7.02 (m, 1H, Ar-H), 2.27 (s, 3H, CH3); 13C NMR (100 MHz, CDCl3) δ 153.1, 150.9, 148.2, 142.6, 137.1, 133.6, 132.9, 130.3, 129.9, 129.6, 128.9, 128.5, 128.0, 126.5, 125.9, 120.8, 120.7, 22.8; MS m/z (rel. int.): 392 (2), 363 (19), 283 (100), 273 (79), 193 (97), 166 (36), 91 (54); HRMS (ESI+) m/z calcd. for C20H16N4Se [M + H]+: 393.0613; found: 393.0603.

  • FAPERGS/CAPES has sponsored the publication of this article.
  • Supplementary Information
    Supplementary data are available free of charge at http://jbcs.sbq.org.br as PDF file.

Acknowledgments

The authors are grateful to FAPERGS (PqG 002070-2551/13-3) and CNPq (Grants 474963/2013-6, 400150/2014-0 and 447595/2014-8) for the financial support. CNPq is also acknowledged for the fellowship for D. A. and G. P. Professors Sidnei Moura e Silva and Thiago Barcellos from Biotechnology Laboratory of Natural and Synthetic Products, Biotechnology Institute (UCS), Caxias do Sul, RS, are acknowledged for the HRMS analysis.

References

  • 1
    Katritzky, A. R.; Pozharskii, A. F.; Handbook of Heterocyclic Chemistry, 2nd ed.; Elsevier Science: Oxford, 2000; Alvarez-Builla, J.; Vaquero, J. J.; Barluenga, J.; Modern Heterocyclic Chemistry, Wiley-VCH: Weinheim, 2011, vol. 1.
  • 2
    Quin, L. D.; Tyrell, J. A. In Fundamentals of Heterocyclic Chemistry: Importance in Nature and in the Synthesis of Pharmaceuticals, Wiley: Hoboken, New Jersey, 2007, p. 196; Joule, J. A.; Mills K. In Heterocyclic Chemistry, 5th ed., Wiley: Chichester, 2010, p. 645.
  • 3
    Schulzeab, B.; Schubert, U. S.; Chem. Soc. Rev.2014, 43, 2522; Chow, H.-F.; Lau, K.-N.; Ke, Z.; Liang, Y.; Lo, C.-M.; Chem. Commun.2010, 46, 3437; Amblard, F.; Cho, J. H.; Schinazi, R. F.; Chem. Rev.2009, 109, 4207; Wim Dehaen, W.; Bakulev, V. A. In Topics in Heterocyclic Chemistry Series; Maes, B. U. W.; Cossy, J.; Polanc, S., eds.; Springer: Cham, 2015, vol. 40.; Katritzky, A. R.; Rachwal, S.; Comprehensive Heterocyclic Chemistry III; Elsevier Science: Oxford, 2008, vol. 5, p. 1.
  • 4
    For selected examples see: Donato, F.; de Gomes, M. G.; Goes, A. T. R.; Sues, N.; Alves, D.; Jesse, C. R.; Savegnago, L.; Life Sci.2013, 93, 393; Stacy, D. M.; Le Quement, S. T.; Hansen, C. L.; Clausen, J. W.; Tolker-Nielsen, T.; Brummond, J. W.; Givskov, M.; Nielsen, T. E.; Blackwell, H. E.; Org. Biomol. Chem.2013, 11, 938; Guan, Z.; Chai, X.; Yu, S.; Hu, H.; Jiang, Y.; Meng, Q.; Wu, Q.; Chem. Biol. Drug Des.2010, 76, 496; Kharb, R.; Sharma, P. C.; Yar, M. S.; J. Enzyme Inhib. Med. Chem.2011, 26, 1; Kolb, H. C.; Sharpless, K. B.; Drug Discovery Today2003, 8, 1128.
  • 5
    Rostovtsev, V. V.; Green, L. G.; Fokin, V. V.; Sharpless, K. B.; Angew. Chem., Int. Ed.2002, 41, 2596; Krasinski, A.; Radic, Z.; Manetsch, R.; Raushel, J.; Taylor, P.; Sharpless, K. B.; Kolb, H. C.; J. Am. Chem. Soc.2005, 127, 6686; Lee, L. V.; Mitchell, M. L.; Huang, S.; Fokin, V. V.; Sharpless, K. B.; Wong, C.; J. Am. Chem. Soc.2003, 125, 9588; Hein, J. E.; Tripp, J. P.; Krasnova, L. B.; Sharpless, K. B.; Fokin, V. V.; Angew. Chem., Int. Ed.2009, 48, 1; Appukkuttan, P.; Mehta, V. P.; Van der Eycken, E.; Chem. Soc. Rev.2010, 39, 1467; Kappe, C. O.; Van der Eycken, E.; Chem. Soc. Rev.2010, 39, 1280; Sokolovaab, N. V.; Nenajdenko, V. G.; RSC Adv.2013, 3, 16212; Hassan, S.; Müller, T. J. J.; Adv. Synth. Catal.2015, 357, 617; Meldal, M.; Tornøe, C. W.; Chem. Rev.2008, 108, 2952; da Silva; M. T.; de Oliveira, R. N.; Valença, W. O.; Barbosa; F. C. G.; da Silva; M. G.; Camara, C. A.; J. Braz. Chem. Soc.2012, 23, 1839.
  • 6
    Rhoden, C. R. B.; Zeni, G.; Org. Biomol. Chem.2011, 9, 1301; Godoi, M.; Paixão, M. W.; Braga, A. L.; Dalton Trans.2011, 40, 11347; Perin, G.; Lenardão, E. J.; Jacob, R. G.; Panatieri, R. B.; Chem. Rev.2009, 109, 1277; Freudendahl, D. M.; Shahzad, S. A.; Wirth, T.; Eur. J. Org. Chem.2009, 1649; Freudendahl, D. M.; Santoro, S.; Shahzad, S. A.; Santi, C.; Wirth, T.; Angew. Chem., Int. Ed.2009, 48, 8409; Braga, A. L.; Lüdtke, D. S.; Vargas, F.; Curr. Org. Chem.2006, 10, 1921; Santoro, S.; Azeredo, J. B.; Nascimento, V.; Sancineto, L.; Braga, A. L.; Santi, C.; RSC Adv.2014, 4, 31521; Santi, C.; Tidei, C.; Scalera, C.; Piroddi, M.; Galli, F.; Curr. Chem. Biol.2013, 7, 25.
  • 7
    Wirth, T.; Top. Curr. Chem.2000, 208, 1; Devillanova, F. A.; Handbook of Chalcogen Chemistry: New Perspectives in Sulfur, Selenium and Tellurium, RSC: Cambridge, 2006; Alberto, E. E.; Braga, A. L. In Selenium and Tellurium Chemistry: From Small Molecules to Biomolecules and Materials; Derek, W. J.; Risto, L., eds.; Springer: Berlin, 2011, pp. 285; Wirth, T. Organoselenium Chemistry: Synthesis and Reactions; Wiley-VCH Verlag GmbH & Co. KGaA: Weinheim, 2011; Santi, C.; Organoselenium Chemistry between Synthesis and Biochemistry; Bentham Science Publishers: Bussum, 2014.
  • 8
    Sharpless, K. B.; Young, M. W.; Lauer, R. F.; Tetrahedron Lett.1973, 1979; Kondo, N.; Fueno, H.; Fujimoto, H.; Makino, M.; Nakaoka, H.; Aoki, I.; Uemura, S.; J. Org. Chem.1994, 59, 5254.
  • 9
    Jones, D. N.; Mundy, D.; Whitehouse, R. D.; J. Chem. Soc., Chem. Commun.1970, 86.
  • 10
    Kim, H. S.; Kim, Y. J.; Lee, H.; Park, K. Y.; Lee, C.; Chin, C. S.; Angew. Chem., Int. Ed.2002, 41, 4300; Thurow, S.; Pereira, V. A.; Martinez, D. M.; Alves, D.; Perin, G.; Jacob, R. G.; Lenardão, E. J.; Tetrahedron Lett.2011, 52, 640; Alberto, E. E.; Rossato, L. L.; Alves, S. H.; Alves, D.; Braga, A. L.; Org. Biomol. Chem.2011, 9, 1001.
  • 11
    Braga, A. L.; Ludtke, D. S.; Vargas, F.; Braga, R. C.; Synlett2006, 1453; Braga, A. L.; Vargas, F.; Sehnem, J. A.; Braga, R. C.; J. Org. Chem.2005, 70, 9021; Braga, A. L.; Paixão, M. W.; Ludtke, D. S.; Silveira, C. C.; Rodrigues, O. E. D.; Org. Lett.2003, 5, 2635; Braga,A. L.; Paixão, M. W.; Marin, G.; Synlett2005, 1975; Braga, A. L.; Rodrigues, O. E. D.; Paixão, M. W.; Appelt, H. R.; Silveira, C. C.; Bottega, D. P.; Synthesis2002, 2338.
  • 12
    Victoria, F. N.; Anversa, R.; Penteado, F.; Castro, M.; Lenardão, E. J.; Savegnago, L.; Eur. J. Pharmacol.2014, 742, 131; Schumacher, R. F.; Rosário, A. R.; Souza, A. C. G.; Acker, C. I.; Nogueira, C. W.; Zeni, G.; Bioorg. Med. Chem.2011, 19, 1418; Nogueira, C. W.; Rocha, J. B.; Arch. Toxicol.2011, 85, 1313; Naithani, R.; Mini-Rev. Med. Chem.2008, 8, 657; Shiah, H.-S.; Lee, W.-S.; Juang, S.-H.; Hong, P.-C.; Lung, C.-C.; Chang, C.-J.; Chou, K.-M.; Chang, J.-Y.; Biochemical Pharmacol.2007, 73, 610; Soriano-Garcia, M.; Curr. Med. Chem.2004, 11, 1657; May, S. W.; Expert Opin. Invest. Drugs2002, 11, 1261.
  • 13
    Seus, N.; Saraiva, M. T.; Alberto, E. E.; Savegnago, L.; Alves, D.; Tetrahedron2012, 68, 10419; Deobald, A. M.; Camargo, L. R. S.; Hörner, M.; Rodrigues, O. E. D.; Alves, D.; Braga, A. L.; Synthesis2011, 2397.
  • 14
    Thurow, S.; Webber, R.; Perin, G.; Lenardão, E. J.; Alves, D.; Tetrahedron Lett 2013, 54, 3215.
  • 15
    Deobald, A. M.; Camargo, L. R. S.; Tabarelli, G.; Hörner, M.; Rodrigues, O. E. D.; Alves, D.; Braga, A. L.; Tetrahedron Lett.2010, 51, 3364.

Data availability

Publication Dates

  • Publication in this collection
    Nov 2015

History

  • Received
    09 June 2015
  • Accepted
    01 Sept 2015
Sociedade Brasileira de Química Instituto de Química - UNICAMP, Caixa Postal 6154, 13083-970 Campinas SP - Brazil, Tel./FAX.: +55 19 3521-3151 - São Paulo - SP - Brazil
E-mail: office@jbcs.sbq.org.br