Acessibilidade / Reportar erro

Framework to manage suppliers for strategic alliances with a multicriteria method

Abstract

Processes that identify top suppliers of new products or services and evaluate the performance of the existing suppliers are essential to strategic alliances. The objective of this article is to propose a framework to select partners for strategic alliances in supply chain management using a multi-criteria method. To reach this objective, the multi-criteria modeling procedure was used to detach the steps of a decision process, which comprises the methodology used in this article. To illustrate the use of the model, a numerical application, with characteristics from a small supermarket using the ELECTRE III method, was presented. The main contribution of the model proposed is to improve the process used to select suppliers for strategic alliances by considering multiple criteria called 'soft factors'. The proposed model suggests a systematic procedure that can reduce uncertainty in the decision process.

ELECTRE III; Multi-criteria decision analysis; Strategic alliances; Supplier selection


1. Introduction

Decisions regarding supplier selection for strategic alliances are considered complex, mainly due to consideration of various qualitative and quantitative criteria, which very often have conflicting relations with each other (Choy et al., 2003Choy, K. L., Lee, W. B., & Lo, V. (2003). Design of an intelligent supplier relationship management system: A hybrid case based neural network approach. Expert Systems with Applications, 24, 225-237 http://dx.doi.org/10.1016/S0957-4174(02)00151-3 .
https://doi.org/10.1016/S0957-4174(02)00...
; Almeida, 2013Almeida, A T. (2013). Processo de decisão nas organizações: construindo modelos de decisão multicritério. São Paulo: Atlas.). It should be emphasized that the definition of an appropriate set of criteria and the analysis of an interaction between them is essential. In this sense, Figueira et al. (2009)Figueira, J. R., Greco, S., & Roy, B. (2009). ELECTRE methods with interaction between criteria: An extension of the concordance index . European Journal of Operational Research, 199(2): 478-495 http://dx.doi.org/10.1016/j.ejor.2008.11.025 .
https://doi.org/10.1016/j.ejor.2008.11.0...
state that fuzzy integral-based methods were introduced in decision aiding to allow such interactions to be taken into account.

Currently, having processes to identify the best suppliers of new products or services or even to evaluate the performance of a former supplier is an essential issue in strategic alliances. However, these tasks are also difficult given that they involve not only quantitative measures, but also qualitative factors, such as stability in the management structure; reliability; financial stability, among others (Bozarth & Handfield, 2008Bozarth, C C., & Handfield, R. B (2008). Introduction to operations and supply chain management. New Jersey: Pearson Education Inc.).

In the last twenty or so years, many articles have tackled these issues in various different situations such as: selecting suppliers and evaluating their performance in connection with the purchase of components/materials (Boran et al., 2009Boran, F. E., Genç, S., Kurt, M., & Akay, D. (2009). A multi-criteria intuitionistic fuzzy group decision making for supplier selection with TOPSIS method. Expert Systems with Applications, 36(8): 11363-11368 http://dx.doi.org/10.1016/j.eswa.2009.03.039 .
https://doi.org/10.1016/j.eswa.2009.03.0...
); selecting the most appropriate alternative for outsourcing (Almeida, 2007Almeida, A. T. (2007). Multicriteria decision model for outsourcing contracts selection based on utility function and ELECTRE method. Computers & Operations Research, 34, 3569-3574 http://dx.doi.org/10.1016/j.cor.2006.01.003 .
https://doi.org/10.1016/j.cor.2006.01.00...
); selecting partners for co-development alliances (Feng et al., 2010Feng, B., Fan, Z. P., & Ma, J. (2010). A method for partner selection of codevelopment alliances using individual and collaborative utilities. International Journal of Production Economics, 124, 159-170 http://dx.doi.org/10.1016/j.ijpe.2009.10.019 .
https://doi.org/10.1016/j.ijpe.2009.10.0...
) and; selecting suppliers for optimal allocation order, satisfying constraints (Razmi et al., 2009Razmi, J., Songhori, M. J., & Khakbaz, M. H. (2009). An integrated fuzzy group decision making/fuzzy linear programming (FGDMLP) framework for supplier evaluation and order allocation. International Journal of Advanced Manufacturing Technology, 43, 590-607 http://dx.doi.org/10.1007/s00170-008-1719-7 .
https://doi.org/10.1007/s00170-008-1719-...
). Despite several studies having explored the problem of selecting suppliers in a multicriteria context, with different methods and approaches, few of them deal specifically with strategic alliances in supply chain management in a multicriteria decision aid context (Feng et al., 2010Feng, B., Fan, Z. P., & Ma, J. (2010). A method for partner selection of codevelopment alliances using individual and collaborative utilities. International Journal of Production Economics, 124, 159-170 http://dx.doi.org/10.1016/j.ijpe.2009.10.019 .
https://doi.org/10.1016/j.ijpe.2009.10.0...
).

Therefore, the purpose of this article is to propose a framework to rank suppliers, using a multicriteria method, more specifically, ELECTRE III, to aid decision makers in the process of choosing partners for strategic alliances with information sharing. The ELECTRE III method was chosen given the peculiarities of the problem of selecting partners for strategic alliances. Thereafter, the decision maker (DM) can determine what collaboration strategies to adopt with each supplier according to its performance in order to maximize the value across the entire supply chain.

2. Literature review

2.1. Supplier selection problem (SSP)

Evaluating suppliers' performance and selecting them are considered strategic issues, because these activities contribute to obtaining, keeping and improving a competitive advantage (Wang, 2010Wang, W. P. (2010). A fuzzy linguistic computing approach to supplier evaluation. Applied Mathematical Modeling, 34(10): 3130-3141 http://dx.doi.org/10.1016/j.apm.2010.02.002 .
https://doi.org/10.1016/j.apm.2010.02.00...
). In recent years many authors have proposed different multicriteria approaches and different sets of criteria to carry out these activities. There is no consensus among experts in the area regarding a best method or a best set of criteria (Almeida, 2013Almeida, A T. (2013). Processo de decisão nas organizações: construindo modelos de decisão multicritério. São Paulo: Atlas.).

One of the first and most quoted studies regarding this problem was published in 1966 by Dickson, who proposed 23 criteria by which to select suppliers, the most important criteria were: Quality; Delivery; Performance History; Guarantee Policies; Productive Capacity and Price. Ellram (1990)Ellram, L. M. (1990). The supplier selection decision in strategic alliances. Journal of Purchasing and Materials Management, Fall, 8-14. proposed some criteria called 'soft factors', which are focused on strategic alliances between suppliers and buyers in supply chains. The main criteria highlighted were: Feeling of trust, management attitude, outlook for the future, strategic fit, and top management compatibility.

Ho et al. (2010)Ho, W, Xu, X., & Dey, P. K. (2010). Multi-criteria decision making approaches for supplier evaluation and selection: A literature review . European Journal of Operational Research, 202(1): 16-24 http://dx.doi.org/10.1016/j.ejor.2009.05.009 .
https://doi.org/10.1016/j.ejor.2009.05.0...
carried out a literature review on articles published in international journals from 2000 to 2008, the authors found that the most used individual approach was DEA, whereas the most popular integrated approach was AHP - GP, besides the most popular criteria were: quality, delivery, and price/cost. Viana & Alencar (2012)Viana, J. C., & Alencar, L. H. (2012). Metodologias para seleção de fornecedores: uma revisão da literatura . Produção, 22(4): 625-636 http://dx.doi.org/10.1590/S0103-65132012005000067 .
https://doi.org/10.1590/S0103-6513201200...
conducted a literature review based on 56 articles on supplier selection problem and identified main methodologies used, trends and gaps of the literature in the period between 1998 and 2011.

Many other studies have emerged on supplier selection problem, especially from 2006 to the present. For the purposes of this article, a selection of those that bear most directly on the Multicriteria Decision Aid (MCDA) approach proposing some models with a set of criteria is shown in Table 1.

Table 1.
Summary of Supplier Selection Articles.

As presented in Table 1, the only article approaching strategic alliances and thus, considering appropriate criteria for this process was from Feng et al. (2010)Feng, B., Fan, Z. P., & Ma, J. (2010). A method for partner selection of codevelopment alliances using individual and collaborative utilities. International Journal of Production Economics, 124, 159-170 http://dx.doi.org/10.1016/j.ijpe.2009.10.019 .
https://doi.org/10.1016/j.ijpe.2009.10.0...
. Other articles presented are focused in selection of suppliers for purchasing of products and services. Since the work from Dickson (1966)Dickson, G. W. (1966). An analysis of vendor selection systems and decisions. Journal of Purchasing, 2(1): 5-17. until now, most of articles on supplier selection focus on criteria cost, quality, delivery, capacity among others, which are quantitative in nature and, reflects the traditional arm's length relationships with suppliers. In the context of this article, the companies will consider another type or relationship with suppliers, cooperative in nature, aimed to strategic alliances, which requires differentiated criteria. The next section has the purpose to differentiate the relationships aimed to strategic alliances and emphasize the need of a proper set of criteria for this situation.

2.2. Strategic alliances and soft factors

The previous relationships characterized by an 'arm's-length' relation were gradually replaced by 'durable arm's-length' and 'strategic alliances', the latter being characterized by a high degree of information exchange (Dyer et al., 1998Dyer, J., Cho, D., & Chu, W. (1998). Strategic supplier segmentation: the next 'best practice' in supply chain management. California Management Review, 40(2): 57-77 http://dx.doi.org/10.2307/41165933 .
https://doi.org/10.2307/41165933...
). Moreover, the complexity increases, because supply chain partnering involves collaborative activities such as sharing information, synchronizing decisions, sharing complementary resources, and aligning incentives (Cao & Zhang, 2010Cao, M., & Zhang, Q. (2010). Supply chain collaborative advantage: A firm's perspective . International Journal of Production Economics, 128(1): 358-367 http://dx.doi.org/10.1016/j.ijpe.2010.07.037 .
https://doi.org/10.1016/j.ijpe.2010.07.0...
).

Strategic alliances are driven by efforts to reduce price, increase the dependability of supply, and influence supplier quality and delivery schedules (Ellram, 1995Ellram, L. M. (1995). Total cost of ownership: An analysis approach for purchasing . International Journal of Physical Distribution & Logistics Management, 25, 4-23 http://dx.doi.org/10.1108/09600039510099928 .
https://doi.org/10.1108/0960003951009992...
). The main reasons to constitute strategic alliances can be highlighted: growth strategies and entering new markets; obtain new technology and/or best quality or cheapest cost; reduce financial risk and share costs of research and development; achieve or ensure competitive advantage (Elmuti & Kathawala, 2001Elmuti, D., & Kathawala, Y. (2001). An overview of strategic alliances. Management Decision, 39(3): 205-217 http://dx.doi.org/10.1108/EUM0000000005452 .
https://doi.org/10.1108/EUM0000000005452...
).

Furthermore, the strategic alliances involve information sharing, risks and rewards sharing, cooperation, similar objectives and customer focus, integration of key-processes, and interfunctional coordination (Mentzer et al., 2001Mentzer, J., Dewitt, W., & Keebler, J. (2001). Defining supply chain management. Journal of Business Logistics, 22(2): 1-25 http://dx.doi.org/10.1002/j.2158-1592.2001.tb00001.x .
https://doi.org/10.1002/j.2158-1592.2001...
). It is also possible through strategic alliances to focus on core activities ( Kannan & Tan, 2004Kannan, V. R., & Tan, K. C. (2004). Supplier alliances: differences in attitudes to supplier and quality management of adopters and non-adopters. International Journal of Supply Chain Management, 9(4): 279-286 http://dx.doi.org/10.1108/13598540410550028 .
https://doi.org/10.1108/1359854041055002...
; Wong et al., 2005Wong, A., Tjosvold, D., & Zhang, P. (2005). Developing relationships in strategic alliances: Commitment to quality and cooperative interdependence . Industrial Marketing Management, 34(7): 722-731 http://dx.doi.org/10.1016/j.indmarman.2004.12.007 .
https://doi.org/10.1016/j.indmarman.2004...
). In this sense, trust emerges as a driver's performance and is associated with lower costs of trading (Bandeira et al., 2009Bandeira, R. A. M., Mello, L. C. B. B., & Maçada, A. C. G. (2009). Relacionamento interorganizacional na cadeia de suprimentos: um estudo de caso na indústria da construção civil . Produção, 19(2): 376-387 http://dx.doi.org/10.1590/S0103-65132009000200012 .
https://doi.org/10.1590/S0103-6513200900...
).

On the other hand, as pointed out by Tjemkes & Furrer (2010)Tjemkes, B., & Furrer, O. (2010). The antecedents of response strategies in strategic alliances. Management Decision, 48(7): 1103-1133 http://dx.doi.org/10.1108/00251741011068806 .
https://doi.org/10.1108/0025174101106880...
, strategic alliances involve uncertainty, interdependence, and vulnerability. Mentzer et al. (2001)Mentzer, J., Dewitt, W., & Keebler, J. (2001). Defining supply chain management. Journal of Business Logistics, 22(2): 1-25 http://dx.doi.org/10.1002/j.2158-1592.2001.tb00001.x .
https://doi.org/10.1002/j.2158-1592.2001...
indicated that in order to succeed over time, alliances must adapt their tasks, routines, performance indicators and objectives, avoiding premature termination.

Based in these facts, we can denote that strategic alliances are different in nature than traditional buyer-supplier relationships, thus requiring the consideration of additional factors in evaluation of supplier's performance, which goes beyond quantitative factors as cost, delivery, quality, and others (Ellram, 1990Ellram, L. M. (1990). The supplier selection decision in strategic alliances. Journal of Purchasing and Materials Management, Fall, 8-14.; Bozarth & Handfield, 2008Bozarth, C C., & Handfield, R. B (2008). Introduction to operations and supply chain management. New Jersey: Pearson Education Inc.). Indeed these factors should be considered, nevertheless a new set of supplier selection criteria considering 'soft factors' should be also incorporated (Ellram, 1990Ellram, L. M. (1990). The supplier selection decision in strategic alliances. Journal of Purchasing and Materials Management, Fall, 8-14.).

Soft factors are those that are unique due to the partnership character of the buyer-supplier relationship, which cover issues based more on 'gut feel' than on any kind of policy statement or quantitative analysis (Ellram, 1990, p. 13Ellram, L. M. (1990). The supplier selection decision in strategic alliances. Journal of Purchasing and Materials Management, Fall, 8-14.). Soft factors can consider metrics as: ability to share information, trust, reliability, ease of communication, goals alignment, among others. The evaluation criteria for evaluate the performance of cooperative relationships, aimed to strategic alliances, should be developed according to the relative importance of the various strategic objectives established by managers, which can be adapted during the lifetime of the alliance (Cravens et al., 2000Cravens, K., Piercy, N., & Cravens, D. (2000). Assessing the Performance of Strategic Alliances: Matching Metrics to Strategies. European Management Journal, 18(5): 529-541 http://dx.doi.org/10.1016/S0263-2373(00)00042-6 .
https://doi.org/10.1016/S0263-2373(00)00...
). Ellram (1990)Ellram, L. M. (1990). The supplier selection decision in strategic alliances. Journal of Purchasing and Materials Management, Fall, 8-14.identified through interviews with managers the following criteria related to strategic alliances: feeling of trust; management attitude for the future; strategic fit; top management compatibility, compatibility across levels and functions of buyer and supplier companies; supplier's organizational structure and personnel; business references, and customer's base of suppliers.

Effective relations require a clear understanding of expectations, open communication and information exchange, mutual trust and a common direction for the future (Ellram, 1990Ellram, L. M. (1990). The supplier selection decision in strategic alliances. Journal of Purchasing and Materials Management, Fall, 8-14.). In addition, some criteria can measure the performance of strategic alliances: cost reductions identified by working together in cross-business teams; sales volume from new service capabilities from working together; learning and growth measures considered the extent of teamwork relationships; enhancing cross-functional skills; aligning incentives related to integration (Cravens et al., 2000Cravens, K., Piercy, N., & Cravens, D. (2000). Assessing the Performance of Strategic Alliances: Matching Metrics to Strategies. European Management Journal, 18(5): 529-541 http://dx.doi.org/10.1016/S0263-2373(00)00042-6 .
https://doi.org/10.1016/S0263-2373(00)00...
).

3. Multicriteria ranking methods

Several methods have been developed over the years to deal with ranking problems, and each has its own peculiarities that must be highlighted in order to choose the most appropriate method for each case, which depends on the decision maker's rationality. The main methods that deal with ranking problems found in the literature are as follows.

Dias & Climaco (2000)Dias, L. C., & Clìmaco, J. N. (2000). Additive aggregation with variable interdependent parameters: the VIP analysis software. Journal of the Operational Research Society, 51(9): 1070-1082. proposed the VIP Analysis algorithm, which considers an additive value function. Edwards & Barron (1994)Edwards, W., & Barron, F. H. (1994). SMARTS and SMARTER: Improved simple methods for multiattribute utility measurements . Organizational Behavior and Human Decision Processes, 60, 306-325 http://dx.doi.org/10.1006/obhd.1994.1087.
https://doi.org/10.1006/obhd.1994.1087...
presented two similar methods to measure multi-attribute utility: SMARTS and SMARTER. SMARTS, which use a linear approximation for single-dimension utility functions. The Analytic Hierarchy Process - AHP is a technique for converting subjective assessments of a relative importance into a set of weights and, for breaking down a complex decision problem into a hierarchical tree (Almeida, 2013Almeida, A T. (2013). Processo de decisão nas organizações: construindo modelos de decisão multicritério. São Paulo: Atlas.). The Utilité Additive - UTA is based on MAUT, it assumes an additive utility function and generates a set of utility functions (Jacquet-Lagreze & Siskos, 1982Jacquet-Lagreze, E., & Siskos, J. (1982). Assessing a Set of Additive Utility Functions for Multicriteria Decision Making: The UTA Method . European Journal of Operational Research, 10(2): 151-164 http://dx.doi.org/10.1016/0377-2217(82)90155-2 .
https://doi.org/10.1016/0377-2217(82)901...
).

PROMETHÉE I supplies a partial ranking, which allows incomparability. On the other hand, PROMETHÉE II supplies complete ranking, which considers all the alternatives are comparable (Brans & Mareschal, 2005Brans, J. P., & Mareschal, B. (2005). PROMETHEE Methods. In: J. Figueira, S. Greco & M. Ehrgott (Eds.), Multiple Criteria Decision Analysis: State of the Art Surveys (pp. 163-196). London: Springer Verlag.). Over the years, several versions of PROMETHÉE, such as versions III and V, have been proposed. ELECTRE III allows the introduction of pseudo-criteria instead of true-criteria, thus the outranking relation can be interpreted as a fuzzy relation. ELECTRE IV method was developed to address specifically the problem of urban planning presented in Hugonnard & Roy (1984)Hugonnard, J., & Roy, B. (1984). Ranking of suburban line extension projects for the Paris metro system by multicriteria method. Transportation Research, 16, 301-312..

In general, ELECTRE methods comprise two main procedures: i) constructing one or several outranking relation(s), and ii) a procedure for exploiting relations. First of all, the purpose of constructing one or several outranking relation(s) is to compare each pair of actions in a comprehensive way. Then, the exploitation procedure is used in order to draw up recommendations from the results obtained in the first phase (Figueira et al., 2005Figueira, J., Mousseau, V., & Roy, B. (2005). ELECTRE methods. In: J. Figueira, S. Greco & M. Ehrgott (Eds.), Multiple Criteria Decision Analysis: State of the Art Surveys (pp. 133-162). London: Springer Verlag.).

According to Figueira et al. (2005)Figueira, J., Mousseau, V., & Roy, B. (2005). ELECTRE methods. In: J. Figueira, S. Greco & M. Ehrgott (Eds.), Multiple Criteria Decision Analysis: State of the Art Surveys (pp. 133-162). London: Springer Verlag. the use of ELECTRE methods are relevant when decision situations have the following characteristics:

  • 1) The DM wants to include at least three criteria in the model, although it may be done for two criteria, in special situations, and

  • 2) At least one of the following situations must be verified:

  • a) Actions are evaluated (for at least one criterion) on an ordinal scale or on a weak interval scale;

  • b) A strong heterogeneity related to the nature of evaluations exists among criteria, which complicates the aggregation of all criteria in a unique and common scale;

  • c) Non-compensatory aggregation procedures;

  • d) For at least one criterion the following holds true: small differences of evaluations are not significant in terms of preferences, while the accumulation of several small differences may become significant. This requires the introduction of discrimination thresholds (indifference and preference)

When compared with ELECTRE II, the method ELECTRE III presented two new features: (i) the possibility of working with indifference and preference thresholds, i.e. with the concept of pseudo-criterion, and (ii) the introduction of a fuzzy outranking relation instead of a preference model containing only two crisp outranking relations (Roy & Vanderpooten, 1997Roy, B., & Vanderpooten, D. (1997). The European school of MCDA: Emergence, basic features and current works . Journal of Multi-Criteria Decision Analysis, 5(1): 22-38 http://dx.doi.org/10.1002/(SICI)1099-1360(199603)5:1<22::AID-MCDA93>3.0.CO;2-F .
https://doi.org/10.1002/(SICI)1099-1360(...
, Figueira et al., 2005Figueira, J., Mousseau, V., & Roy, B. (2005). ELECTRE methods. In: J. Figueira, S. Greco & M. Ehrgott (Eds.), Multiple Criteria Decision Analysis: State of the Art Surveys (pp. 133-162). London: Springer Verlag.).

Combinations with methods ELECTRE III/IV has been proposed, some of them can be highlighted: Freitas & Costa (1998)Freitas, A. L. P., & Costa, H. G. (1998). Avaliação e classificação da qualidade de serviços utilizando uma abordagem multicritério. Gestão e Produção, 5(3): 272-283 http://dx.doi.org/10.1590/S0104-530X1998000300008 .
https://doi.org/10.1590/S0104-530X199800...
proposed a combination of ELECTRE III with tools supported in quality methodologies and with statistical methods. Almeida (2007)Almeida, A. T. (2007). Multicriteria decision model for outsourcing contracts selection based on utility function and ELECTRE method. Computers & Operations Research, 34, 3569-3574 http://dx.doi.org/10.1016/j.cor.2006.01.003 .
https://doi.org/10.1016/j.cor.2006.01.00...
developed the association of ELECTRE with MAUT. Alencar et al. (2010)Alencar, L. H., Almeida, A. T., & Morais, D. C. A. (2010) Multicriteria group decision model aggregating the preferences of decision-makers based on ELECTRE methods. Pesquisa Operacional, 30, 687-702 http://dx.doi.org/10.1590/S0101-74382010000300010 .
https://doi.org/10.1590/S0101-7438201000...
proposed a multicriteria group decision model using ELECTRE. Wang & Triantaphyllou (2008)Wang, X., & Triantaphyllou, E. (2008). Ranking irregularities when evaluating alternatives by using some ELECTRE methods. Omega, 36, 45-63 http://dx.doi.org/10.1016/j.omega.2005.12.003 .
https://doi.org/10.1016/j.omega.2005.12....
analyzed the rank reversal problems in ELECTRE II and ELECTRE III. Hora & Costa (2009)Hora, H R. M. ., & Costa, H. G. (2009). O problema da inversao de ordem em métodos multicritério: um experimento com o ELECTRE III/IV. In: Anais do XLI Simpósio Brasileiro de Pesquisa Operacional, Porto Seguro. developed an experiment with ELECTRE III/IV and found that the ELECTRE IV shown more stable than ELECTRE III.

4. Framework proposed to manage suppliers in strategic alliances

This framework is proposed to manage suppliers in strategic alliances, using a multicriteria method (ELECTRE III) to rank suppliers. It is distinguished by inserting in this context, specific criteria related to strategic alliances called soft factors. The use of MCDA approach enables this type of analysis to be made in a structured and systematic way, which facilitates the decision making process.

The ELECTRE III method was chosen for this application, considering the main characteristics of the decision problem. Thus, the following characteristics of the problem can be highlighted: i) The consideration of more than two criteria; ii) The need of alternatives to be evaluated in an ordinal scale; iii) The nature of criteria (quantitative and qualitative); iv) The demand for a method with non-compensatory aggregation procedures; v) The need of considering the imprecise judgments of the decision maker.

In order to illustrate the use of the framework, it is presented in this section a numerical application simulating a situation with real characteristics from a supermarket based on the articles of Mainville et al. (2008)Mainville, D., Reardon, T., & Farina, E. M. M. Q. (2008). Scale, scope, and specialization effects on retailers procurement strategies: evidence from the fresh produce markets of São Paulo. Revista de Economia e Sociologia Rural, 46(1): 207-227 http://dx.doi.org/10.1590/S0103-20032008000100009 .
https://doi.org/10.1590/S0103-2003200800...
and Vieira et al. (2009)Vieira, J, Yoshizahi, H., & Ho, L. (2009). Collaboration intensity in the Brazilian supermarket retail chain. Supply Chain Management: An International Journal, 14(1): 11-21 http://dx.doi.org/10.1108/13598540910927269 .
https://doi.org/10.1108/1359854091092726...
, which tackled collaborative relationships and alliances in this segment. The steps of the numerical application are: 1) Describing the context of the problem and defining the objectives; 2) Structuring the decision problem; 3) Defining a set of criteria; 4) Defining suitable suppliers; 5) Applying the ELECTRE III method; 6) Conducting the sensitivity analysis.

4.1. Description of the context of the problem

Assume that the company operates in the supermarket sector, and provides its customers with products such as commodities. The main characteristics and description of the problem context is presented in Table 2.

Table 2.
Characteristics and description of the problem.

Particularly in this case, given that most goods sold are commodity-type products, the lack of availability of items pushes customers to the competition and whenever this problem persists, this leads the company to losing a portion of the consumer market. This assertion is supported by Araz et al. (2007)Araz, C. Ozfirat, P. M., & Ozkarahan, I. (2007). An integrated multicriteria decision-making methodology for outsourcing management. Computers & Operations Research, 34(12): 3738-3756 http://dx.doi.org/10.1016/j.cor.2006.01.014 .
https://doi.org/10.1016/j.cor.2006.01.01...
who pointed out that purchasing activities are an important part of the overall operation of a company. Therefore, the ability of any company to maintain quality and meet delivery requirements depends directly on the performance of its suppliers.

Moreover, this problem is characterized as a selection of supplier problem - SSP, which is increasingly seen as a strategic issue by companies. Note that the decision problem in this paper has a single DM, who is the supplier relationship manager, and it is clear that the company needs a model to evaluate and select suppliers that includes additional criteria and not just those of price, quality and delivery on-time, in order to optimize the supply process and offer a better service to its customers.

4.2. Structuring the decision problem and defining the objectives

The structuring of a problem and its goals in a hierarchy helps to understand the context of the decision and to define the set of objectives and criteria, in addition to providing the basis for using quantitative modeling (Keeney, 1992Keeney, R L. . (1992). Value-focused thinking: a path to creative decision making. Cambridge: Harvard College.). The strategy of value focused thinking (VFT) which Keeney (1992)Keeney, R L. . (1992). Value-focused thinking: a path to creative decision making. Cambridge: Harvard College. put forward, addresses how values can be used to improve the decision making process. In the present article, this methodology involved: i) analyzing the context of the problem (Section 4.1); ii) structuring the decision problem and identifying preliminary means-ends objectives and fundamental hierarchy objectives (Section 4.2), and iii) defining the set of criteria to measure the objectives (Section 4.3).

Therefore, the hierarchy of objectives of this decision context is shown in Figure 1.

Figure 1.
Hierarchy of decision maker's objectives.

Hence, as shown in Figure 1, the strategic objective at the top of the hierarchy is dedicated to managing suppliers; the fundamental objectives are: to minimize delays, wastes, divergences and conflicts with suppliers and, to increase the reliability of the supply process; the mean objective is: to select suppliers able to work with EDI technology and the ECR - Efficient Consumer Response system. In order to be aware to what extent suppliers are able to invest and implement EDI and ECR, it is necessary to evaluate the suppliers according to their performance under an appropriate set of criteria, which are related to the objectives set out in this numerical application. The appropriate set of criteria is described in the following section. It should be emphasized that the validation of these objectives and, consequently, the validation of the set of criteria, it was based on literature, considering the proposal of a generic framework that can be adapted by decision makers.

4.3. The definition of a set of criteria

In the context of the numerical application, this paper proposes the following set of five criteria:

Agility in responding to customers: Responding quickly buyer's demands/requests. This criterion may be measured by analyzing the order cycle time in days, the percentage of deliveries within the period specified by the customer, the rate of adherence to the schedule of delivery, among others (Vieira et al., 2009Vieira, J, Yoshizahi, H., & Ho, L. (2009). Collaboration intensity in the Brazilian supermarket retail chain. Supply Chain Management: An International Journal, 14(1): 11-21 http://dx.doi.org/10.1108/13598540910927269 .
https://doi.org/10.1108/1359854091092726...
).

JIT capability: The equipment and structure of the supplier company should be used according to the buyer's needs. Production or delivery is pulled by demand. The stocks of raw materials are minimal and sufficient for a few hours of production. Suppliers must be trained, qualified and connected so as to be able to make deliveries of small lots at the frequency desired. This criterion is measured by the number of JIT tools implemented (Vieira et al., 2009Vieira, J, Yoshizahi, H., & Ho, L. (2009). Collaboration intensity in the Brazilian supermarket retail chain. Supply Chain Management: An International Journal, 14(1): 11-21 http://dx.doi.org/10.1108/13598540910927269 .
https://doi.org/10.1108/1359854091092726...
).

Technological capability: Use of appropriate technology to ensure the availability of the product/service to customers. The existence of computerized systems for data exchange and automatic purchasing orders such as EDI; appropriate technology to ensure the visibility of information such as ERP (Enterprise Resource Planning) and SCM software (Ellram, 1990Ellram, L. M. (1990). The supplier selection decision in strategic alliances. Journal of Purchasing and Materials Management, Fall, 8-14.; Yang et al., 2008Yang, J. L., Chiu, H. N., Tzeng, G. H., & Yeh, R. H. (2008). Vendor selection by integrated fuzzy MCDM techniques with independent and interdependent relationships. Information Sciences, 178(21): 4166-4183 http://dx.doi.org/10.1016/j.ins.2008.06.003 .
https://doi.org/10.1016/j.ins.2008.06.00...
; Vieira et al., 2009Vieira, J, Yoshizahi, H., & Ho, L. (2009). Collaboration intensity in the Brazilian supermarket retail chain. Supply Chain Management: An International Journal, 14(1): 11-21 http://dx.doi.org/10.1108/13598540910927269 .
https://doi.org/10.1108/1359854091092726...
; Razmi & Rafiei, 2010Razmi, J. & Rafiei, H. (2010) An integrated analytic network process with mixed-integer non-linear programming to supplier selection and order allocation. The International Journal of Advanced Manufacturing Technology, 49, 1195-1208 http://dx.doi.org/10.1007/s00170-009-2445-5 .
https://doi.org/10.1007/s00170-009-2445-...
; Feng et al., 2010Feng, B., Fan, Z. P., & Ma, J. (2010). A method for partner selection of codevelopment alliances using individual and collaborative utilities. International Journal of Production Economics, 124, 159-170 http://dx.doi.org/10.1016/j.ijpe.2009.10.019 .
https://doi.org/10.1016/j.ijpe.2009.10.0...
).

Interorganizational communication ability: The practice of maintaining open communication and frequent contact with the buyer on routine matters or about technical and organizational changes in the supplier company. It also covers the credibility of information, conducting periodic meetings, technical visits, personal contacts, e-mail, press, releases, and so on. This criterion can be measured by the percentage of accuracy and credibility of information throughout the period of the relationship period; the means of communicating changes in decisions and policies; the periodicity of holding meetings with teams dedicated to commercial and logistics processes (Ellram, 1990Ellram, L. M. (1990). The supplier selection decision in strategic alliances. Journal of Purchasing and Materials Management, Fall, 8-14.; Vieira et al., 2009Vieira, J, Yoshizahi, H., & Ho, L. (2009). Collaboration intensity in the Brazilian supermarket retail chain. Supply Chain Management: An International Journal, 14(1): 11-21 http://dx.doi.org/10.1108/13598540910927269 .
https://doi.org/10.1108/1359854091092726...
).

Cooperation: Organizational links between supplier and buyer. Value of involvement that can motivate the supplier to expend considerable efforts on behalf of the buyer company. This criterion is affected by the nature of the linkage between partners and measures the availability of dedicated teams in the logistics; commercial; production and quality areas; % of savings achieved; % of reduction in waste generation and rework; % of improvements in cycle time of delivery and/or productivity (Bozarth & Handfield, 2008Bozarth, C C., & Handfield, R. B (2008). Introduction to operations and supply chain management. New Jersey: Pearson Education Inc.; Ting & Cho, 2008Ting, S. C., & Cho, D. I. (2008). An integrated approach for supplier selection and purchasing decisions. Supply Chain Management: An International Journal, 13(2): 116-127 http://dx.doi.org/10.1108/13598540810860958 .
https://doi.org/10.1108/1359854081086095...
; Vieira et al., 2009Vieira, J, Yoshizahi, H., & Ho, L. (2009). Collaboration intensity in the Brazilian supermarket retail chain. Supply Chain Management: An International Journal, 14(1): 11-21 http://dx.doi.org/10.1108/13598540910927269 .
https://doi.org/10.1108/1359854091092726...
).

4.4. Defining suitable suppliers

Assume that the company constantly evaluates its suppliers, as a result of which, only those able to attain minimal requirements in criteria such as price, delivery and quality remain in the suppliers' base. These suppliers are considered in this step. In order to define their suitability, it is necessary to evaluate their performance in accordance with the set of criteria, defined previously in Section 4.3. Given that most criteria, in this particular paper, are qualitative in nature, scales of assessment of Likert type were constructed.

The scales used in this paper were constructed in five levels and are based on the description of defined criteria, the values of which range from 1 to 5. Keeney (1992)Keeney, R L. . (1992). Value-focused thinking: a path to creative decision making. Cambridge: Harvard College. emphasized that the criteria should be measurable, operational, and understandable. In order to meet these properties, the scales were constructed to enable the differentiation of each level with regard to the consequences of the decision problem.

First of all, weights for the criteria were defined. Secondly the suppliers were evaluated based on the criteria. Thus, it was possible to construct a matrix of payoffs. In this matrix it is possible to visualize the performance of each alternative regarding each criterion. To illustrate the application method, this paper assumes there are six suppliers and five criteria, which are codified as follows: C1 - Agility in responding to customers; C2- JIT capability; C3 - Technological capacity; C4 - Interorganizational communication ability, and C5 - Cooperation. The performances of suppliers are shown in Table 3.

Table 3.
Matrix of performance Supplier vs. Criteria.

In this case, the performance of the alternatives vs. criteria has been uniformly distributed and rounded in order to discretize the decision problem. It is important to point out that due to this being a numerical application, the weights were based on those in the literature and the performance of the suppliers was generated randomly using Excel, which uses a uniform distribution. After the performance of each supplier was generated, based on the defined set of criteria, the method proceeded to ranking the suppliers. However, before proceeding with this step, the preference and indifference thresholds are established.

4.5. Application of the ELECTRE III method

Based on data presented in Table 1, ELECTRE III-IV software, developed by the Lamsade - Université Paris Dauphine could be used. First of all, in order to carry out the processes of descending and ascending distillation, the two thresholds of indifference and preference deemed alpha and beta were defined. Initially, the thresholds for all criteria were set as being α=0.15 and β=0.30. Also, it was chosen not to consider the veto thresholds due to the suppliers having already gone through a prior selection process based on the criteria of price, quality and delivery. After the software was used to make the calculations, the median and final pre-orders were obtained, which enabled the suppliers to be ranked. In some cases, the DM may consider that there is no threshold of indifference and preference (q and p = 0), this is more common when the criteria have a qualitative assessment of the potential action. Any variation of the thresholds can change the ranking order. These results are presented in Figure 2 and Table 4, respectively.

Figure 2.
Distillation processes.

Table 4.
Ranking of alternatives.

According to the results presented in Figure 2, the distillation processes are convergent except by the alternatives SB and SC, which in the descending distillation were together at the fourth level, whereas in the ascending distillation SC was at the fourth level and in SB at the fifth level. This situation indicates that the model detected a very small difference in the performance of the two suppliers. If divergences between the distillations are found, the DM can examine and analyze these alternatives more closely due to their special sensitivity, regarding non-comparability. Thus, the DM can decide to investigate this situation or review some parameters to gain more confidence in the results found. This is a particular situation found for this kind of DM's preference structure, in which an incomparability relation among consequences should be considered.

Table 4 shows the ranking results according to the median and final pre-orders.

Also, it can be seen from Table 4, that both pre-orders: the median and final ones generated the same ranking of the alternatives, which prove that the model's parameters do not need to be revised and that it was able to compare the alternatives. The Concordance and Credibility indexes were also generated and are given in Table 5.

Table 5.
Matrices of Concordance and Credibility indexes.

The alternatives were compared pairwise, by analyzing the statement aSb. Thus, the Concordance Matrix shown in Table 5 was obtained. The results can be detailed as per in Table 6.

Table 6.
Description of the results with credibility index.

Therefore, the Concordance Matrix proves the ranking provided by distillation processes (Figure 2) and median and final pre-orders (Table 4) and shows that the alternatives with the best performances are respectively: SA/SD - SF - SE - SC - SB. The Credibility Matrix is also shown in Table 6 to facilitate the comparison of the data; it presented the same indexes because the veto threshold was not used in this specific situation. After analyzing these results, Table 7 gives the preference relations.

Table 7.
Preference relations Matrix.

Based on the results presented in Table 7, regarding the preference relations generated after the pairwise comparison of the alternatives, it is seen that:

  • 1) Supplier A is preferred (P) to suppliers B, C, E and F and indifferent (I) to supplier D;

  • 2) Similarly, supplier D is preferred (P) to suppliers B, C, E, F and indifferent (I) to A;

  • 3) Supplier F is preferred (P) to suppliers B, C and E and at least as good as (P-) suppliers A and D;

  • 4) Supplier E is preferred (P) to suppliers B, C and at least as good as (P-) suppliers A, D and F;

  • 5) Supplier C is preferred (P) to supplier B and at least as good as (P-) suppliers A, D, E and F;

  • 6) Supplier B is at least as good as (P-) suppliers A, C, D, E, F.

By using the analysis of this matrix, the following preference relations are found in accordance with the DM's judgments: Strong Preference (P); Weak Preference (P-) and Indifference (I). The relation of Incomparability (R), in this case was not found. Therefore, the alternatives that presented most relations of strong preference (A, D) were ranked as the best alternatives i.e. ranked as the first; the alternatives F, E had an intermediary performance and were ranked as second and third respectively; alternatives C and B, had the worst performance appearing in the last position of the ranking.

4.6. Sensitivity analysis

If necessary, the parameters of the model can be reviewed by means of a sensitivity analysis, for example by varying the parameters alpha and beta. Initially the thresholds of indifference and preference were set at α=0.15 and β=0.30. Variations in them can demonstrate how the values provided by the DM are sensitive, which helps him/her to review some parameter if necessary or whether he/she is secure, before proceeding with the decision. Thus, in order to carry out a sensitivity analysis, the thresholds of indifference and preference for all criteria were re-set to α=0.25 and β=0.40 and, α=0.35 and β=0.50, bearing in mind that the measurement scale is qualitative and the same for all criteria. The results can be visualized in Table 8.

Table 8.
Ranking of alternatives after varied α=0.25 and β=0.40 and α=0.35 and β=0.50.

Also, note from Table 8, that both pre-orders: median and final, with respectively α=0.25 and β=0.40 and, α=0.35 and β=0.50 generated the same ranking. However, when compared with the values of the thresholds first set, namely α=0.15 and β=0.30, there was an inversion between SB and SC, and a ranking with six positions was generated, in which the alternative SD is ranked in first position and alternative SA in second. As stated, in qualitative judgments, varying alpha and beta can change the rankings. The preference relations were altered as a result of the variation of parameters, according Table 9.

Table 9.
Matrices of Preference relations with α=0.25 and β=0.40, and α=0.35 and β=0.50.

As can be seen from Table 9, the preference relations with the parameters α=0.25 and β=0.40 and, α=0.35 and β=0.50, are the same. Nevertheless, comparing these results with the first preference relations in Table 4, the parameters of which were set at α=0.15 and β=0.30, the alternatives SA, SD, SB presented some divergences. This fact denotes that these alternatives are very sensitive and demands closer examination by the DM so that he/she becomes more confident in the results. The DM should analyze the reasons for the non-comparability of these alternatives and, if possible, obtain more information about this before deciding if the ranking is appropriate.

5. Concluding remarks

The main contribution of the model proposed is to improve the process for selecting suppliers for strategic alliances by taking multiple criteria called 'soft factors' into account and evaluating them using a MCDA approach through a systematic procedure. Based on the results presented previously, it is noted that by applying an MCDA method, DMs had the means by which to structure the problem of evaluating and selecting suppliers as partners in strategic alliances in a formal way. This significantly reduces the subjectivity and risk of the decision making process.

Thus, evaluating and selecting the most appropriate suppliers for alliances, for which there should be suitable and balanced performance indicators, is essential in the present business environment. In addition, by continuously evaluating the performance of its partners, the company can provide them with feedback and propose improvements in deficient processes, with a view to achieving greater adherence to the company's policies.

The limitations of this study are related to it does not present a real life application, consequently, with no interaction with the DM and, due to scale of assessment of alternatives under a set of criteria is not validated by means of a methodological procedure, considering that it is not the main objective of this article. On the other hand, the numerical application does not downgrade the proposal, considering that it provides a more generic view of the segment approached, which can be used as base by managers in order to make decision in this context. Furthermore, it can motivate the researchers of supplier selection; to incorporate to traditional criteria those called soft factors.

For further researches it is suggested to analyze the interaction between criteria chosen for the framework based on study of Figueira et al. (2009)Figueira, J. R., Greco, S., & Roy, B. (2009). ELECTRE methods with interaction between criteria: An extension of the concordance index . European Journal of Operational Research, 199(2): 478-495 http://dx.doi.org/10.1016/j.ejor.2008.11.025 .
https://doi.org/10.1016/j.ejor.2008.11.0...
. Besides that, studies considering the rank reversal problems could be developed as per demonstrated by Wang & Triantaphyllou (2008)Wang, X., & Triantaphyllou, E. (2008). Ranking irregularities when evaluating alternatives by using some ELECTRE methods. Omega, 36, 45-63 http://dx.doi.org/10.1016/j.omega.2005.12.003 .
https://doi.org/10.1016/j.omega.2005.12....
and Hora & Costa (2009)Hora, H R. M. ., & Costa, H. G. (2009). O problema da inversao de ordem em métodos multicritério: um experimento com o ELECTRE III/IV. In: Anais do XLI Simpósio Brasileiro de Pesquisa Operacional, Porto Seguro.. Studies with the objective of validate scales of assessment of alternatives under the set of criteria composed by soft factors are also needed. Also, it is suggested more studies related to supermarket segment, including real life applications applying the systematic framework proposed in this article.

Furthermore, it is suggested the development of studies similar to those developed by Vieira et al. (2009)Vieira, J, Yoshizahi, H., & Ho, L. (2009). Collaboration intensity in the Brazilian supermarket retail chain. Supply Chain Management: An International Journal, 14(1): 11-21 http://dx.doi.org/10.1108/13598540910927269 .
https://doi.org/10.1108/1359854091092726...
, including MCDA methods. Also, studies approaching the differences among small, medium and large supermarkets related to purchasing and supplier selection strategies, similar to Mainville et al. (2008)Mainville, D., Reardon, T., & Farina, E. M. M. Q. (2008). Scale, scope, and specialization effects on retailers procurement strategies: evidence from the fresh produce markets of São Paulo. Revista de Economia e Sociologia Rural, 46(1): 207-227 http://dx.doi.org/10.1590/S0103-20032008000100009 .
https://doi.org/10.1590/S0103-2003200800...
, including multicriteria perspective.

Nevertheless it is important to emphasize that for each case, specific indicators should be chosen that correctly represent the goals to be achieved in the decision making process. There are many contexts of supplier selection problem and also, many types of strategic alliances with suppliers (co-development; co-design; co-production; resources sharing; technology transference; information sharing; knowledge sharing, among others); for this reason it is important to adapt the set of criteria covering the particularities of the problem.

References

  • Alencar, L. H., & Almeida, A. T. (2008). Multicriteria decision group model for the selection of suppliers. Pesquisa Operacional, 28, 321-337 http://dx.doi.org/10.1590/S0101-74382008000200009 .
    » https://doi.org/10.1590/S0101-74382008000200009
  • Alencar, L. H., Almeida, A. T., & Morais, D. C. A. (2010) Multicriteria group decision model aggregating the preferences of decision-makers based on ELECTRE methods. Pesquisa Operacional, 30, 687-702 http://dx.doi.org/10.1590/S0101-74382010000300010 .
    » https://doi.org/10.1590/S0101-74382010000300010
  • Alencar, L. H., Almeida, A. T., & Mota, C. M. M. (2007) Sistemática proposta para seleção de fornecedores em gestão de projetos. Gestão e Produção, 14(3): 477-487 http://dx.doi.org/10.1590/S0104-530X2007000300005 .
    » https://doi.org/10.1590/S0104-530X2007000300005
  • Almeida, A T. (2013). Processo de decisão nas organizações: construindo modelos de decisão multicritério. São Paulo: Atlas.
  • Almeida, A. T. (2007). Multicriteria decision model for outsourcing contracts selection based on utility function and ELECTRE method. Computers & Operations Research, 34, 3569-3574 http://dx.doi.org/10.1016/j.cor.2006.01.003 .
    » https://doi.org/10.1016/j.cor.2006.01.003
  • Araz, C. Ozfirat, P. M., & Ozkarahan, I. (2007). An integrated multicriteria decision-making methodology for outsourcing management. Computers & Operations Research, 34(12): 3738-3756 http://dx.doi.org/10.1016/j.cor.2006.01.014 .
    » https://doi.org/10.1016/j.cor.2006.01.014
  • Bandeira, R. A. M., Mello, L. C. B. B., & Maçada, A. C. G. (2009). Relacionamento interorganizacional na cadeia de suprimentos: um estudo de caso na indústria da construção civil . Produção, 19(2): 376-387 http://dx.doi.org/10.1590/S0103-65132009000200012 .
    » https://doi.org/10.1590/S0103-65132009000200012
  • Boran, F. E., Genç, S., Kurt, M., & Akay, D. (2009). A multi-criteria intuitionistic fuzzy group decision making for supplier selection with TOPSIS method. Expert Systems with Applications, 36(8): 11363-11368 http://dx.doi.org/10.1016/j.eswa.2009.03.039 .
    » https://doi.org/10.1016/j.eswa.2009.03.039
  • Bozarth, C C., & Handfield, R. B (2008). Introduction to operations and supply chain management. New Jersey: Pearson Education Inc.
  • Brans, J. P., & Mareschal, B. (2005). PROMETHEE Methods. In: J. Figueira, S. Greco & M. Ehrgott (Eds.), Multiple Criteria Decision Analysis: State of the Art Surveys (pp. 163-196). London: Springer Verlag.
  • Cao, M., & Zhang, Q. (2010). Supply chain collaborative advantage: A firm's perspective . International Journal of Production Economics, 128(1): 358-367 http://dx.doi.org/10.1016/j.ijpe.2010.07.037 .
    » https://doi.org/10.1016/j.ijpe.2010.07.037
  • Chou, S. Y., & Chang, Y. H. (2008). A decision support system for supplier selection based on a strategy-aligned fuzzy SMART approach. Expert Systems with Applications, 34, 2241-2253 http://dx.doi.org/10.1016/j.eswa.2007.03.001 .
    » https://doi.org/10.1016/j.eswa.2007.03.001
  • Choy, K. L., Lee, W. B., & Lo, V. (2003). Design of an intelligent supplier relationship management system: A hybrid case based neural network approach. Expert Systems with Applications, 24, 225-237 http://dx.doi.org/10.1016/S0957-4174(02)00151-3 .
    » https://doi.org/10.1016/S0957-4174(02)00151-3
  • Cravens, K., Piercy, N., & Cravens, D. (2000). Assessing the Performance of Strategic Alliances: Matching Metrics to Strategies. European Management Journal, 18(5): 529-541 http://dx.doi.org/10.1016/S0263-2373(00)00042-6 .
    » https://doi.org/10.1016/S0263-2373(00)00042-6
  • Dias, L. C., & Clìmaco, J. N. (2000). Additive aggregation with variable interdependent parameters: the VIP analysis software. Journal of the Operational Research Society, 51(9): 1070-1082.
  • Dickson, G. W. (1966). An analysis of vendor selection systems and decisions. Journal of Purchasing, 2(1): 5-17.
  • Dyer, J., Cho, D., & Chu, W. (1998). Strategic supplier segmentation: the next 'best practice' in supply chain management. California Management Review, 40(2): 57-77 http://dx.doi.org/10.2307/41165933 .
    » https://doi.org/10.2307/41165933
  • Edwards, W., & Barron, F. H. (1994). SMARTS and SMARTER: Improved simple methods for multiattribute utility measurements . Organizational Behavior and Human Decision Processes, 60, 306-325 http://dx.doi.org/10.1006/obhd.1994.1087.
    » https://doi.org/10.1006/obhd.1994.1087
  • Ellram, L. M. (1990). The supplier selection decision in strategic alliances. Journal of Purchasing and Materials Management, Fall, 8-14.
  • Ellram, L. M. (1995). Total cost of ownership: An analysis approach for purchasing . International Journal of Physical Distribution & Logistics Management, 25, 4-23 http://dx.doi.org/10.1108/09600039510099928 .
    » https://doi.org/10.1108/09600039510099928
  • Elmuti, D., & Kathawala, Y. (2001). An overview of strategic alliances. Management Decision, 39(3): 205-217 http://dx.doi.org/10.1108/EUM0000000005452 .
    » https://doi.org/10.1108/EUM0000000005452
  • Ensslin, L., Ensslin, S. R., Rocha, S., Marafon, A. D., & Medaglia, T. A. (2013). Modelo multicritério de apoio à decisão construtivista no processo de avaliação de fornecedores. Produção, 23(2): 402-421 http://dx.doi.org/10.1590/S0103-65132012005000065 .
    » https://doi.org/10.1590/S0103-65132012005000065
  • Feng, B., Fan, Z. P., & Ma, J. (2010). A method for partner selection of codevelopment alliances using individual and collaborative utilities. International Journal of Production Economics, 124, 159-170 http://dx.doi.org/10.1016/j.ijpe.2009.10.019 .
    » https://doi.org/10.1016/j.ijpe.2009.10.019
  • Figueira, J. R., Greco, S., & Roy, B. (2009). ELECTRE methods with interaction between criteria: An extension of the concordance index . European Journal of Operational Research, 199(2): 478-495 http://dx.doi.org/10.1016/j.ejor.2008.11.025 .
    » https://doi.org/10.1016/j.ejor.2008.11.025
  • Figueira, J., Mousseau, V., & Roy, B. (2005). ELECTRE methods. In: J. Figueira, S. Greco & M. Ehrgott (Eds.), Multiple Criteria Decision Analysis: State of the Art Surveys (pp. 133-162). London: Springer Verlag.
  • Freitas, A. L. P., & Costa, H. G. (1998). Avaliação e classificação da qualidade de serviços utilizando uma abordagem multicritério. Gestão e Produção, 5(3): 272-283 http://dx.doi.org/10.1590/S0104-530X1998000300008 .
    » https://doi.org/10.1590/S0104-530X1998000300008
  • Ha, S. H., & Krishnan, R. (2008). A hybrid approach to supplier selection for the maintenance of a competitive supply chain. Expert Systems with Applications, 34(2): 1303-1311 http://dx.doi.org/10.1016/j.eswa.2006.12.008 .
  • Ho, W, Xu, X., & Dey, P. K. (2010). Multi-criteria decision making approaches for supplier evaluation and selection: A literature review . European Journal of Operational Research, 202(1): 16-24 http://dx.doi.org/10.1016/j.ejor.2009.05.009 .
    » https://doi.org/10.1016/j.ejor.2009.05.009
  • Hora, H R. M. ., & Costa, H. G. (2009). O problema da inversao de ordem em métodos multicritério: um experimento com o ELECTRE III/IV. In: Anais do XLI Simpósio Brasileiro de Pesquisa Operacional, Porto Seguro.
  • Hugonnard, J., & Roy, B. (1984). Ranking of suburban line extension projects for the Paris metro system by multicriteria method. Transportation Research, 16, 301-312.
  • Jacquet-Lagreze, E., & Siskos, J. (1982). Assessing a Set of Additive Utility Functions for Multicriteria Decision Making: The UTA Method . European Journal of Operational Research, 10(2): 151-164 http://dx.doi.org/10.1016/0377-2217(82)90155-2 .
    » https://doi.org/10.1016/0377-2217(82)90155-2
  • Kannan, V. R., & Tan, K. C. (2004). Supplier alliances: differences in attitudes to supplier and quality management of adopters and non-adopters. International Journal of Supply Chain Management, 9(4): 279-286 http://dx.doi.org/10.1108/13598540410550028 .
    » https://doi.org/10.1108/13598540410550028
  • Keeney, R L. . (1992). Value-focused thinking: a path to creative decision making. Cambridge: Harvard College.
  • Ku, C. Y., Chang, C. T., & Ho, H. P. (2010). Global supplier selection using fuzzy analytic hierarchy process and fuzzy goal programming. Qualitative and Quantitative, 44, 623-640 http://dx.doi.org/10.1007/s11135-009-9223-1 .
    » https://doi.org/10.1007/s11135-009-9223-1
  • Liao, C. N., & Kao, H. P. (2010). Supplier selection model using Taguchi loss function, Analytical hierarchy process and Multi-choice goal programming. Computers & Industrial Engineering, 58, 571-577 http://dx.doi.org/10.1016/j.cie.2009.12.004 .
    » https://doi.org/10.1016/j.cie.2009.12.004
  • Mainville, D., Reardon, T., & Farina, E. M. M. Q. (2008). Scale, scope, and specialization effects on retailers procurement strategies: evidence from the fresh produce markets of São Paulo. Revista de Economia e Sociologia Rural, 46(1): 207-227 http://dx.doi.org/10.1590/S0103-20032008000100009 .
    » https://doi.org/10.1590/S0103-20032008000100009
  • Mentzer, J., Dewitt, W., & Keebler, J. (2001). Defining supply chain management. Journal of Business Logistics, 22(2): 1-25 http://dx.doi.org/10.1002/j.2158-1592.2001.tb00001.x .
    » https://doi.org/10.1002/j.2158-1592.2001.tb00001.x
  • Pi, W. N., & Low, C. (2006). Supplier evaluation and selection via Taguchi loss functions and an AHP. International Journal Advanced Manufacturing Technology, 27(5-6): 625-630 http://dx.doi.org/10.1007/s00170-004-2227-z .
    » https://doi.org/10.1007/s00170-004-2227-z
  • Razmi, J. & Rafiei, H. (2010) An integrated analytic network process with mixed-integer non-linear programming to supplier selection and order allocation. The International Journal of Advanced Manufacturing Technology, 49, 1195-1208 http://dx.doi.org/10.1007/s00170-009-2445-5 .
    » https://doi.org/10.1007/s00170-009-2445-5
  • Razmi, J., Songhori, M. J., & Khakbaz, M. H. (2009). An integrated fuzzy group decision making/fuzzy linear programming (FGDMLP) framework for supplier evaluation and order allocation. International Journal of Advanced Manufacturing Technology, 43, 590-607 http://dx.doi.org/10.1007/s00170-008-1719-7 .
    » https://doi.org/10.1007/s00170-008-1719-7
  • Roy, B., & Vanderpooten, D. (1997). The European school of MCDA: Emergence, basic features and current works . Journal of Multi-Criteria Decision Analysis, 5(1): 22-38 http://dx.doi.org/10.1002/(SICI)1099-1360(199603)5:1<22::AID-MCDA93>3.0.CO;2-F .
    » https://doi.org/10.1002/(SICI)1099-1360(199603)5:1<22::AID-MCDA93>3.0.CO;2-F
  • Ting, S. C., & Cho, D. I. (2008). An integrated approach for supplier selection and purchasing decisions. Supply Chain Management: An International Journal, 13(2): 116-127 http://dx.doi.org/10.1108/13598540810860958 .
    » https://doi.org/10.1108/13598540810860958
  • Tjemkes, B., & Furrer, O. (2010). The antecedents of response strategies in strategic alliances. Management Decision, 48(7): 1103-1133 http://dx.doi.org/10.1108/00251741011068806 .
    » https://doi.org/10.1108/00251741011068806
  • Viana, J. C., & Alencar, L. H. (2012). Metodologias para seleção de fornecedores: uma revisão da literatura . Produção, 22(4): 625-636 http://dx.doi.org/10.1590/S0103-65132012005000067 .
    » https://doi.org/10.1590/S0103-65132012005000067
  • Vieira, J, Yoshizahi, H., & Ho, L. (2009). Collaboration intensity in the Brazilian supermarket retail chain. Supply Chain Management: An International Journal, 14(1): 11-21 http://dx.doi.org/10.1108/13598540910927269 .
    » https://doi.org/10.1108/13598540910927269
  • Wang, W. P. (2010). A fuzzy linguistic computing approach to supplier evaluation. Applied Mathematical Modeling, 34(10): 3130-3141 http://dx.doi.org/10.1016/j.apm.2010.02.002 .
    » https://doi.org/10.1016/j.apm.2010.02.002
  • Wang, X., & Triantaphyllou, E. (2008). Ranking irregularities when evaluating alternatives by using some ELECTRE methods. Omega, 36, 45-63 http://dx.doi.org/10.1016/j.omega.2005.12.003 .
    » https://doi.org/10.1016/j.omega.2005.12.003
  • Wong, A., Tjosvold, D., & Zhang, P. (2005). Developing relationships in strategic alliances: Commitment to quality and cooperative interdependence . Industrial Marketing Management, 34(7): 722-731 http://dx.doi.org/10.1016/j.indmarman.2004.12.007 .
    » https://doi.org/10.1016/j.indmarman.2004.12.007
  • Yang, J. L., Chiu, H. N., Tzeng, G. H., & Yeh, R. H. (2008). Vendor selection by integrated fuzzy MCDM techniques with independent and interdependent relationships. Information Sciences, 178(21): 4166-4183 http://dx.doi.org/10.1016/j.ins.2008.06.003 .
    » https://doi.org/10.1016/j.ins.2008.06.003

Publication Dates

  • Publication in this collection
    18 Aug 2015
  • Date of issue
    July-Sep 2015

History

  • Received
    15 Mar 2013
  • Accepted
    12 July 2013
Associação Brasileira de Engenharia de Produção Av. Prof. Almeida Prado, Travessa 2, 128 - 2º andar - Room 231, 05508-900 São Paulo - SP - São Paulo - SP - Brazil
E-mail: production@editoracubo.com.br