SciELO - Scientific Electronic Library Online

vol.23 issue2Design and optimization of new simulated moving bed plantsSolubility of dense CO2 in two biocompatible acrylate copolymers author indexsubject indexarticles search
Home Pagealphabetic serial listing  

Services on Demand




Related links


Brazilian Journal of Chemical Engineering

Print version ISSN 0104-6632On-line version ISSN 1678-4383

Braz. J. Chem. Eng. vol.23 no.2 São Paulo Apr./June 2006 



Interfacial phenomena at the compressed co2-water interface



B. Bharatwaj; S. R. P. Rocha*

Chemical Engineering and Materials Science, Wayne State University, Detroit, MI 48202, USA. E-mail:




Compressed CO2 is considered to be a viable alternative to toxic volatile organic solvents with potential applications in areas including separation reactions, and materials formation processes. Thus an interest in CO2 stems from the fact that it is very inexpensive, has low toxicity, and is not a regulated. However, compressed CO2 has a zero dipole moment and weak van der Waals forces and thus is a poor solvent for both polar and most high molecular weight solutes, characteristics that severely restrict its applicability. In order to overcome this inherent inability, surfactant-stabilized organic and aqueous dispersions in CO2 have been proposed. This work will discuss fundamentals and recent advances in the design of amphiphiles for the novel CO2-water interface.

Keywords: High pressure; Interfacial tension; Surfactants; Water-in-CO2 microemulsions.




Development of energy-efficient and "green" alternatives to conventional separation and materials formation processes are keys to economical development in times of uncertainties in the world petroleum market and of tighter environmental regulations. CO2 is cheap, is not regulated by either the FDA or EPA, has tunable solvent strength, and can be easily recycled. Such unique properties make compressed CO2 one of the most promising substitutes for toxic and volatile organic solvents. Significant advances in CO2-based technologies, with applications in areas including the microelectronic industry (Deyoung, et al., 2002), bioseparations (Ghenciu, et al., 1998), and nanoparticle synthesis (Shah, et al., 2003), have been propelled by the discovery of amphiphiles capable of forming and stabilizing colloidal dispersions in compressed CO2. Despite the progress achieved in the design of polymeric amphiphiles, very little has been done in developing small molecule surfactants that are capable of efficiently stabilizing water-dispersed domains in CO2, and yet are environmentally friendly and inexpensive (Eastoe, et al., 2003). Current limitations are the small number (mostly fluorinated) of molecules with significant interfacial activity at the CO2-water (C|W) interface and the generally high pressures required to stabilize formulations involving water and compressed CO2. The properties of the C|W interface are strikingly different from those of conventional oil-water (O|W) interfaces. Most marked, are (1) the much lower surfactant requirement at the onset of formation of reverse aggregates of water-in-CO2 (W/C), than that in O|W systems (da Rocha, et al., 2000) and (2) the fact that subtle changes in surfactant chemistry have a profound effect on the pressure required to stabilize the reverse aggregates (Eastoe, et al., 2000, Steytler, et al., 2001). Figure 1 is an idealized picture of W/C reverse microemulsions.



New paradigms have correlated surfactant structure with its activity at the C|W interface. Surfactants with a lower surface tension at the critical aggregation concentration (cac) at the air-water (A|W) interface seem to be more interfacially active at the C|W interface (Eastoe, et al., 2002), than those that provide a large free fractional volume accessible to CO2 in the monolayer region (da Rocha, et al., 2003, Stone, et al., 2004). A detailed knowledge of the macroscopic properties and molecular level details of the binary and surfactant modified C|W interface is essential to explain these paradigms, thus providing a rational and intuitive framework for surfactant design. These steps are required for the advancement of CO2-based technology. It is the focus of this work to illustrate how complementary information obtained from experiments and atomistic computer simulations can be used to gain this fundamental understanding of the C|W interface. First, a brief overview of the stability of reverse microemulsions will be presented.



Instability in water-in-oil (W/O) microemulsions, as indicated by phase separation, can be induced by (1) curvature or (2) attractive droplet interactions (Hou, et al., 1987). Curvature effects arise due to the difference in surfactant head group - head group, and tail-tail interactions, which are mediated by the environment in which they are solvated (Israelachvili, 1994, Israelachvili, 1997). From this difference in interaction, an interfacial bending stress arises on the flat oil-water film, causing it to curve spontaneously to an optimal curvature of 1/R0, provided very low interfacial tensions (g) can be attained. Phase separation will occur when water droplets assume a radius larger than R0 (will "squeeze out" water molecules). W/O microemulsions and excess water will then be in equilibrium. On the other hand, phase separation due to attractive droplet interactions results in the coexistence of two microemulsion phases of the same curvature. Such attractive interactions arise predominantly due to surfactant tail-tail interactions during microemulsion contact, and to a lesser extent, to the attraction of the water droplet cores (Hou, et al., 1988). The same behavior has been documented for W/C microemulsions (Lee, et al., 2001, McFann, et al., 1994).

Obviously, the relative strength of tail-tail, oil-oil (CO2-CO2) and oil-tail (CO2-tail) interactions will dictate the magnitude of attraction upon collision i.e., whether the microemulsion system is stable or not. In the case of compressible solvents, these interactions will also dictate the minimum pressure required to stabilize such dispersions. Also, the presence of additives such as alcohols (cosurfactants) at the interfacial surfactant film can reduce tail-tail, and thus micelle-micelle, interactions (McFann, et al., 1994). A similar effect is expected with bulkier, more branched surfactant tails (Hou, et al., 1987, Huang, et al., 1984, McFann, et al., 1994), as illustrated in Figure 2. The addition of salt can also reduce intramicellar head-group repulsion (Aveyard, et al., 1986) in a way that tail penetration between interacting droplets is reduced due to greater steric hindrance in the interfacial region.



Even though far from optimized, several successful approaches to the C|W interface have found issues regarding surfactant geometry, i.e., in the ability to bend around water (Eastoe, et al., 2000, Johnston, et al., 1996, Zielinsky, et al., 1997). Many amphiphiles have also been shown to have an appropriate balance, as revealed by the decrease in the interfacial tension at the C|W interface (gC|W)(da Rocha, et al., 1999). However, W/C microemulsions have much stronger attractive interactions than their W/O counterparts, a fact that has been attributed to the enhanced strength of attractive tail-tail interactions between approaching microemulsion droplets (Lee, et al., 2001), which is directly manifested by the high pressures generally required for their stabilization. Therefore, a microscopic level description of the monolayer region along with knowledge of the effect of thermodynamic variables on adsorption of the amphiphiles at interface are essential in the development of inexpensive and environmentally acceptable amphiphiles with high activity at the C|W interface, and yet the ability to stabilize the system at low pressures.



The microstructure of W/C microemulsions has been the focus of several recent studies using both small angle neutron (SANS) (Eastoe, et al., 2000, Lee, et al., 2001, Zielinsky, et al., 1997) and x-ray (SAXS) (Liu, et al., 2002) scattering. Apart from a more recent study reporting the attractive interaction between microemulsion droplets and an estimate of the thickness of the surfactant monolayer based on an ad-hoc model (Lee, et al., 2001), most of the previous work is focused on the size and surfactant coverage of these droplets (Eastoe, et al., 1997, Lee Jr., et al., 2000). In spite of the widespread interest in the effect of surfactant chemistry on the formation and stability of these aggregates, no systematic research on the microscopic properties of surfactant monolayers at the C|W interface has yet been reported.

Powered by recent advances in computer algorithms and fast and inexpensive computers, results from molecular dynamics (MD) computer simulations have filled some of the gaps left by previous experimental approaches, and have also helped to support some of the previously proposed paradigms. Insight into the microstructure of the bare and surfactant modified C|W interfacial region was recently reported (da Rocha, et al., 2001, 2002, 2004, Salaniwal, et al., 2001, Senapati, et al., 2002, Stone, et al., 2003, 2004). Figure 3 is a snapshot of an equilibrium configuration of a perfluoropolyether ammonium carboxylate (CF3(OCF2CF(CF3))3OCF 2COO-NH4+) (PFPE-COO-NH4+) surfactant at the C|W interface (da Rocha, et al., 2002) obtained by MD computer simulations. The significant penetration of CO2 into the monolayer region can be qualitatively observed. This important feature is shown in quantitative detail in Figure 4, where the atomic density profile is given, under the same thermodynamic conditions as in Figure 3. To a large extent, the features observed for amphiphiles at conventional O|W interfaces is preserved for surfactants at the C|W interface. The surfactant head group is completely submerged and well solvated in the aqueous-rich phase, while the surfactant tail group is mostly excluded from the aqueous phase. It is also obvious that CO2 is capable of penetrating the surfactant tail region to a large extent. At the peak of the fluorine density distribution, the density of CO2 is approximately 50 % of its bulk value. This is surprisingly greater than that observed for CCl4 in the hydrocarbon tail region of SDS surfactant at the CCl4|W interface (Dominguez, et al., 2000). It should be noted that such a large penetration does not arise due to the low surfactant coverage at the C|W interface (84 Å2/molecule in that case). The generally observed low surfactant coverage at the C|W interface is a direct consequence of the small difference in free energy density difference for the binary C|W interface i.e., a lower surfactant requirement for aggregate formation is driven by the lower interfacial tension of the bare C|W interface (da Rocha, et al., 2000). Another very relevant microscopic insight into the structure-function relationship of surfactants at the C|W interface was provided in a recent MD study of the effect of fluorination of double-tailed phosphate surfactants (Stone, et al., 2003). It was determined that the enhanced activity of F amphiphiles at the C|W interface can be correlated with a greater separation of both CO2 and water from the interfacial region than for its hydrogenated counterpart. This in turn is attributed to both the bulkiness and the enhanced hydrophobicity of F atoms.





While for the most part there seems to be a consensus regarding the use of detailed models for both solvents (water and CO2), few research projects employ fully atomistic models to describe the chemistry of the surfactant (da Rocha, et al., 2002, Stone, et al., 2004). This is a surprising observation given the significant impact that subtle changes in surfactant architecture have on surfactant activity at the C|W interface (Eastoe, et al., 2000, 2003, Steytler, et al., 2001). For example, substituting a single atom in the surfactant tail terminal group CF3 to form CHF2 in a double-tailed semi-fluorinated sulfosuccinate amphiphile requires an increase in pressure of approximately 9 MPa to stabilize a W/C microemulsion with a molar water/surfactant ratio of 10 (Eastoe, et al., 2000). Evidently, such fine details cannot be modeled using a united atom approach. Moreover, united atom models do not account for the significant interaction between the CO2 quadrupole moment and the surfactant tail-group local dipoles. This interaction plays an essential role in the solvation of species in CO2 and is therefore expected to significantly affect the overall monolayer organization (da Rocha, et al., 2004). It is also known from experimental observation that replacing the sulfosuccinate surfactant head group by phosphate, as the tail group is kept constant, has the effect of reducing the pressure required to stabilize a W/C microemulsion of about 10 MPa. This observation (Steytler, et al., 2001) clearly illustrates the relevance of a correct model description of the solvation of the head group, as well as the CO2-philic tail. A fully atomistic description of the surfactant is therefore essential for obtaining the correct physics of the problem.



Interfacial tension (g), a direct measure of the surfactant affinity for the interface, and surface coverage (G) are the most fundamental properties of amphiphiles at fluid-fluid interfaces. These properties have been determined using the pendant drop technique, adapted to high-pressure systems (da Rocha, et al., 1999). The area occupied per surfactant molecule at the interface A (=1/G) can be calculated with the help of the Gibbs-Adsorption equation:

which relates g to G (or A) (da Rocha, et al., 2000). In practice, A is obtained from the slope of the curve of g vs. surfactant concentration ([cs]), before the break in the curve observed as [cs] increases (Figure 5). The concentration at the break is assigned as the critical aggregation concentration (cac) i.e., cac delimits the region where the surfactant is molecular solubilized at [cs] < cac and the region where micellar aggregates are formed at [cs] > cac. These definitions are better illustrated in Figure 5.



The g of the C|W interface (gC|W) at moderate pressures is ~ 20 mN/m (da Rocha, et al., 1999). The value of ~ 50 mN/m which is much lower than those generally observed in conventional O|W systems(Freitas, et al., 1997), dictates the much lower surfactant requirement for the C|W interface i.e. the large A at the onset of aggregation (da Rocha, et al., 2000). The values of A obtained from Figure 5 for a PFPE-COO-NH4+ 2500MW range from 76 to 107 Å2/molecule as T varies from 25 (liquid) to 65 ºC (supercritical) at a constant solvent power (density) of 0.842 The free energy (DGµic) for microemulsion formation can be calculated from the cac values. The associated enthalpy and entropy can also be calculated, providing a detailed description of the thermodynamics of aggregation. These results can be utilized to guide the design of efficient amphiphiles for this interface (da Rocha, et al., 2000). The DGµic observed, is larger than that expected for dipole-dipole interactions (head group-head group), thus reflecting hydrogen bonding of water to the anions and ion hydration. Water molecules can bridge the head groups through hydrogen bonding to form nuclei for further aggregation. Interactions between the ionic head groups and water are thus responsible for the enthalpically driven aggregation process. The enthalpic interactions overcome the unfavorable ordering of the surfactants in the interfacial region (loss of entropy).



CO2-based technologies have the potential to replace existing processes where either a significant amount of natural resources are wasted (e.g. water) and/or toxic organic solvents are emitted. Tougher environmental regulations worldwide are expected to provide necessary incentives to pursue such environmentally friendly technologies. It is likely that colloidal-based phenomena will continue to provide innovative routes for the development of new processes utilizing compressed CO2. However, several issues regarding surfactant design need to be addressed. Most striking is the need for new classes of amphiphiles that are at the same time highly active and inexpensive. A recent study demonstrated the ability to disperse significant amounts of water with a commercial nonionic branched hydrocarbon surfactant (Ryoo, et al., 2003). Methylation and branching of surfactant tails were shown to enhance the formation of stable W/C microemulsions by increasing surfactant solubility in CO2, shifting the curvature toward bending around water, and finally reducing overlap between surfactant tails and weakening interdroplet interactions. However, the number of water-surfactant (Wo) molecules, in this case per head-group repeat unit, is much smaller than what has been obtained for fluorinated surfactants. Equally important is the reduction in the pressure required for stabilization of the aggregates. Subtle changes in the surfactant architecture have been shown to cause very significant reductions in the pressure required for stabilization of reverse microemulsions of water in CO2 (Eastoe, et al., 2000, Steytler, et al., 2001). Similar success has not been reported for hydrogenated surfactants.



The author would like to thank the organizing committee of the V-EBFS / Brazil for the kind invitation for this presentation. A start-up grant from the ChE Department at Wayne State University is also gratefully acknowledged, as is the financial support of EPA.



Aveyard, R., Binks, B. P., Clark, S. and Mead, J., Interfacial Tension Minima in Oil-Water-Surfactant Systems: Behavior of Alkane-Aqueous NaCl Systems containing Aerosol OT. J. Chme. Soc. Faraday Trans. I, 82, 125 (1986).        [ Links ]

da Rocha, S. R. P. and Johnston, K. P., Interfacial Thermodynamics of Surfactants at the CO2-Water Interface. Langmuir, 16, 3690 (2000).        [ Links ]

da Rocha, S. R. P., Harrison, K. L. and Johnston, K. P., Effect of Surfactants on the Interfacial Tension and Emulsion Formation Between Water and Carbon Dioxide. Langmuir, 15, 419 (1999).        [ Links ]

da Rocha, S. R. P., Johnston, K. P. and Rossky, P. J., Surfactant-modified CO2-Water interface: A Molecular View. Journal of Physical Chemistry B, 106, 13250 (2002).        [ Links ]

da Rocha, S. R. P., Johnston, K. P. and Rossky, P. J., Quadrupolar Effects in Compressed-CO2|Water Interfacial Systems. in preparation, (2004).

da Rocha, S. R. P., Johnston, K. P., Westacott, R. E. and Rossky, P. J., Molecular Structure of the Water-Supercritical CO2 Interface. Journal of Physical Chemistry B, 105, 12092 (2001).        [ Links ]

da Rocha, S. R. P., Dickson, J., Cho, D. M., Rossky, P. J. and Johnston, K. P., Stubby surfactants for stabilization of water and CO2 emulsions: Trisiloxanes. Langmuir, 19, 3114 (2003).        [ Links ]

Deyoung, J. P., McClain, J. B., Gross, S. M. and Desimone, J. M., Method for Cleaning Microelectronic Structures Using Aqueous Carbon Dioxide Systems. (2002).        [ Links ]

Dominguez, H. and Berkowitz, M. L., Computer Simulations of Sodium Dodecyl Sulfate at Liquid/Liquid and Liquid/Vapor Interfaces. J. Phys. Chem. B, 104, 5302 (2000).        [ Links ]

Eastoe, J., Dupont, A. and Steytler, D. C., Fluorinated Surfactants in Supercritical CO2. Current Opinion in Colloid & Interface Science, 8, 267 (2003).        [ Links ]

Eastoe, J., Paul, A., Downer, A., Steytler, D. C. and Rumsey, E., Effects of Fluorocarbon Surfactant Chain Structure on Stability of Water-in-Carbon Dioxide Microemulsions. Links between Aqueous Surface Tension and Microemulsion Stability. Langmuir, 18, 3014 (2002).        [ Links ]

Eastoe, J., Cazelles, B. M. H., Steytler, D. C., Holmes, J. D., Pitt, A. R., Wear, J. T. and Heenan, R. K., Water-in-CO2 Microemulsions Studied by Small-Angle Neutron Scattering. Langmuir, 13, 6980 (1997).        [ Links ]

Eastoe, J., Downer, A., Paul, A., Steytler, D. C., Rumsey, E., Penfold, J. and Heenan, R. K., Fluoro-surfactants at Air/Water and Water/CO2 Interfaces. Physical Chemistry Chemical Physics, 2, 5235 (2000).        [ Links ]

Eastoe, J., Downer, A., Paul, A., Steytler, D. C., Rumsey, E., Penfold, J. and Heenan, R. K., Fluoro-surfactants at Air/Water and Water/CO2 Interfaces. Physical Chemistry Chemical Physics, 2, 5235 (2000).        [ Links ]

Freitas, A. A., Quina, F. H. and Carrol, F. A., Estimation of Water-Organic Interfacial Tensions. A Linear Free Energy Relationship Analysis of Interfacial Adhesion. J. Phys. Chem. B, 101, 7488 (1997).        [ Links ]

Ghenciu, E. G., Russel, A. J. and Beckman, E. J., Extraction of Subtilisin into CO2 using Fluoroether-Functional Amphiphiles. Biotechnology & Bioengineering, 58, 572 (1998).        [ Links ]

Hou, M.-J. and Shah, D. O., Effects of the Molecular Structure of the Interface and Continuous Phase on Solubilization of Water in Water/Oil Microemulsions. Langmuir, 1987, 1086 (1987).        [ Links ]

Hou, M. J., Kim, M. and Shah, D. O., A Light Scattering Study on the Droplet Size and Interdroplet Interaction in Microemulsions of AOT-Oil-Water Systems. J. Coll. Interf. Sci., 123, 398 (1988).        [ Links ]

Huang, J. S., Safran, S. A., Kim, M. W., Grest, G. S., Kotlarchyk, M. and Quirke, N., Attractive Interactions in Micelles and Microemulsions. Physical Review Letters, 53, 592 (1984).        [ Links ]

Israelachvili, J., The science and applications of Emulsions - An Overview. Colloids and Surfaces A: Physc. and Eng. Aspects, 91, 1 (1994).        [ Links ]

Israelachvili, J. N., Intermolecular and Surface Forces. 450 (1997).        [ Links ]

Johnston, K. P., Harrison, K. L., Clarke, M. J., Howdle, S. M., Heitz, M. P., Bright, F. V., Carlier, C. and Randolph, T. W., Water-in-Carbon Dioxide Mircoemulsions: An Environment for Hydrophiles Including Proteins. Science, 271, 624 (1996).        [ Links ]

Lee, C. T., Jr., Johnston, K. P., Dai, H. J., Cochran, H. D., Melnichenko, Y. B. and Wignall, G. D., Droplet Interactions in Water-in-Carbon Dioxide Microemulsions Near the Critical Point: A Small-Angle Neutron Scattering Study. J. Phys. Chem. B, 105, 3540 (2001).        [ Links ]

Lee Jr., C. T., Psathas, P. A., Zielger, K. J., Johnston, K. P., Dai, H. J., Cochran, H. D., Melnichenko, Y. B. and Wignalld, G. D., Formation of Water-in-Carbon Dioxide Microemulsions with a Cationic Surfactant: A Small-Angle Neutron Scattering Study. J. Phys. Chem. B, 104, 11094 (2000).        [ Links ]

Liu, J., Han, B., Zhang, J., Li, G., Zhang, X., Wang, J. and Dong, B., Formation of Water-in-CO2 Microemulsions with Non-fluorous Surfactant Ls-54 and Solubilization of Biomacromolecules. Chem. Eur. J., 8, 1356 (2002).        [ Links ]

McFann, G. J., Johnston, K. P. and Howdle, S. M., Solubilization in Nonionic Reverse Micelles in Carbon-Dioxide. Aiche Journal, 40, 543 (1994).        [ Links ]

Ryoo, W., Webber, S. E. and Johnston, K. P., Water-in-Carbon Dioxide Microemulsions with Methylated Branched Hydrocarbon Surfactants. Industrial & Engineering Chemistry Research, 42, 6348 (2003).        [ Links ]

Salaniwal, S., Cui, S. T., Cochran, H. D. and Cummings, P. T., Molecular Simulation of a Dichain Surfactant Water Carbon Dioxide System. 1. Structural Properties of Aggregates. Langmuir, 17, 1773 (2001).        [ Links ]

Senapati, S., Keiper, J. S., DeSimone, J. M., Wignall, G. D., Melnichenko, Y. B., Frielinghaus, H. and Berkowitz, M. L., Structure of Phosphate Fluorosurfactant Based Reverse Micelles in Supercritical Carbon Dioxide. Langmuir, 18, 7371 (2002).        [ Links ]

Shah, P. S., Johnston, K. P. and Korgel, B. A., Nanocrystal Synthesis and Stabilization in Supercritical Solvents. Supercritical Carbon Dioxide: Separations and Processes, 860, 339 (2003).        [ Links ]

Steytler, D. C., Rumsey, E., Thorpe, M., Eastoe, J. and Paul, A., Phosphate Surfactants for Water-in-CO2 Microemulsions. Langmuir, 17, 7948 (2001).        [ Links ]

Stone, M. T., Rocha, S. R. P. d., Rossky, P. J. and Johnston, K. P., Molecular Differences between Hydrocarbon and Fluorocarbon Surfactants at the CO2/Water Interface. J. Phys. Chem. B, 107, 10185 (2003).         [ Links ]

Stone, M. T., Smith, P. G., da Rocha, S. R. P., Rossky, P. J. and Johnston, K. P., Low Interfacial Free Volume of Stubby Surfactants Stabilizes Water-in-Carbon Dioxide        [ Links ]

Microemulsions. J. Phys. Chem. B, 108, 1962 (2004).        [ Links ]

Zielinsky, R. G., Kline, S. R., Kaler, E. W. and Rosov, N., A Small-Angle Neutron Scattering Study of Water in Carbon Dioxide Microemulsions. Langmuir, 13, 3934 (1997).        [ Links ]



Received: October 20, 2004
Accepted: December 19, 2005



* To whom correspondence should be addressed

Creative Commons License All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License