SciELO - Scientific Electronic Library Online

vol.34 issue1EXPERIMENTAL DATA, THERMODYNAMIC MODELING AND SENSITIVITY ANALYSES FOR THE PURIFICATION STEPS OF ETHYL BIODIESEL FROM FODDER RADISH OIL PRODUCTIONSolubility of 1-Adamantanamine hydrochloride in Six Pure Solvents between 283.15 K and 333.15 K author indexsubject indexarticles search
Home Pagealphabetic serial listing  

Services on Demand




Related links


Brazilian Journal of Chemical Engineering

Print version ISSN 0104-6632On-line version ISSN 1678-4383

Braz. J. Chem. Eng. vol.34 no.1 São Paulo Jan./Mar. 2017 



É. C. Avelar1 

C. L. G. Alvarenga2 

G. P. S. Resende1 

C. A. Morais2 

M. B. Mansur1  *  * 

1Departamento de Engenharia Metalúrgica e de Materiais, Universidade Federal de Minas Gerais, (UFMG), Av. Antônio Carlos 6627, Pampulha, CEP: 31270-901, Belo Horizonte - MG, Brazil. Phone: +55 (31) 3409-1811; Fax: +55 (31) 3409-1715

2Centro de Desenvolvimento de Tecnologia Nuclear, (CDTN) - CNEN, Campus UFMG, Pampulha, P.O. Box: 941, CEP: 30123-970, Belo Horizonte - MG, Brazil. Phone: +55 (31) 3069-3277; Fax: +55 (31) 3069-3399


The present study investigated the solvent extraction of uranium from sulfate acid solutions using Alamine 336 as an extractant dissolved in commercial kerosene Exxsol D-100 and 5% v/v of tridecanol as a modifying agent at room temperature (25±2) ºC and an aqueous/organic volumetric ratio of unity. Experiments were carried out at typical concentration levels like those used at the uranium plant of INB (Indústrias Nucleares do Brasil), Brazil. Data fitting using the slope analysis method revealed that uranium is extracted by Alamine 336 as UO2SO4 and UO2(SO4)22- species, forming (R3NH+)2UO2(SO4)22- in the organic phase; the extraction of the species UO2(SO4)34- seems improbable for the operating conditions investigated. The extraction of uranium is significantly reduced when the concentrations of sulfate and chloride ions in the aqueous phase are increased.

Keywords: Solvent extraction; Uranium sulfate; Alamine 336; Equilibrium


The nuclear energy industry was the major user of the solvent extraction technique for metals separation before base metals recovery was implemented in the late 1960s, when the first large copper plants came into operation. A number of extractants have been used for uranium extraction from acid solutions. Such extractants are classified into four main types (Kumar et al., 2011): (i) nitrogen-based extractants, that cover predominantly the amide and amine functional group containing extractants, such as Alamine 336 (N,N-dioctyloctan-1-amine) and Adogen 363 (tri-octyl methylammonium chloride); (ii) phosphorous-based extractants, including tri-butyl-phosphate (TBP), di(2-ethylhexyl) phosphoric acid (D2EHPA), 2-ethylhexyl mono-2-ethylhexyl phosphonic acid (PC88A), tri-n-octyl-phosphine oxide (TOPO or Cyanex 923), and bis(2,4,4-trimethyl pentyl) phosphinic acid (Cyanex 272); (iii) sulfur-based extractants, mainly sulfoxides and other sulfur-containing extractants; and (iv) other extractants. The performance of a number of alkyl-diammonium extractants in the extraction of uranium from sulfuric, nitric, and hydrochloric media was compared with that of Aliquat 336 (tri-octyl-methyl-ammonium chloride) and Alamine 336 in an attempt to simulate the conditions employed in the mining industry (du Preez et al., 1985).

Tertiary amines are the most common extractant types used to treat industrial solutions resulting from the sulfuric acid leaching of uranium-bearing ores (Yakubu and Dudeney, 1987; Lakshmi et al., 2004). The selectivity order of amines for some ions is (Mackenzie, 1997): UO2(SO4)34- > NO3- > Cl- > HSO4- > Fe(SO4)2-. The extraction of a neutral uranium (VI) sulfate species in an adduct type of mechanism is also plausible (Ritcey, 2006). The degree to which either the extraction of an anionic or neutral uranium species is involved would seem to depend on the uranium species present, which in turn depends on the sulfate concentration and pH of the aqueous phase. The major impurity that is preferentially extracted from uranium by Alamine 336 is molybdenum. The synergistic extraction of uranium using tertiary amines can be accomplished by adding TOPO to the solvent phase to enhance kinetics; however, stripping is difficult (IAEA, 1993).

In Brazil, uranium is solely produced by INB (Indústrias Nucleares do Brasil S.A.), the state-owned company responsible for uranium extraction and its transformation into nuclear energy. The current production consists of 400 tons of uranium per year. The purification of the sulfate leach liquors is carried out by solvent extraction, using Alamine 336 as an extractant. Uranium is stripped from the extract stream by contacting it with a sodium chloride (NaCl) solution. The water used in this process is fully recycled/recirculated within the plant after treatment, given that this industrial plant is located in the semi-arid regions of Northeast Brazil. As water treatment does not include a chloride removal step, the increase in chloride concentrations in the aqueous solutions has affected uranium purification efficiency through solvent extraction with Alamine 336 (Gomiero et al., 2009). Stripping studies using ammonium sulfate ((NH4)2SO4) revealed a viable alternative stripping agent (Morais and Gomiero, 2005), so this reagent could replace NaCl in the stripping step, avoiding the presence of chloride ions in the aqueous streams of the industrial plant.

In this context, the present study aimed to evaluate the solvent extraction equilibrium of uranium from sulfate solutions using Alamine 336 under typical operating conditions of the INB industrial process and at room temperature. The study has two main purposes: (i) develop a thermodynamic model and validate it to assess the sulfate aqueous solutions without chloride ions in concentrated systems, and (ii) evaluate experimentally the effect of the presence of chloride ions on uranium extraction from sulfate solutions. The model was developed in the absence of chloride aiming to identify the uranium (VI) sulfate species that is (are) extracted with Alamine 336 in the normal operating conditions of the industrial plant of INB. However, due to the scarcity of water, that results in an increase of chloride content in the recirculated aqueous streams of the industrial plant, experiments were also done to quantify the deleterious effect of chloride on the uranium extraction process.


Uranium (VI) dissociates in sulfate media according to the following reactions (NEA, 2004; Vercouter et al., 2008; Vopálka et al., 2010):

UO22+(aq)+SO42(aq)UO2SO4(aq),K1 (1)

UO2SO4(aq)+SO42(aq)UO2(SO4)22(aq),K2 (2)

UO2(SO4)22(aq)+SO42(aq)UO2(SO4)34(aq),K3 (3)

The theoretical distribution of uranium (VI) species within the studied operating conditions (concentration range limited by the vertical gray lines) is shown in Figure 1. Calculations were done using stability constants (K1 to K3) from distinct authors portrayed in Table 1. The concentrations of HSO4- and SO42- ions in the aqueous phase were determined assuming dissociation of sulfuric acid according to the following reactions (Free, 2013):

H2SO4(aq)H+(aq)+HSO4(aq),K4=94.9 (4)

HSO4(aq)H+(aq)+SO42(aq),K5=0.0279 (5)

Figure 1 Speciation diagram of uranium (VI) sulfate: NEA (2004) - continuous curves; Vopálka et al. (2010) - dotted curves; Vercouter et al. (2008) - dashed curves ([U]total = 0.01 M; T = 25 ºC; stability constants listed in Table 1). 

Table 1 Stability constants of uranium (VI) sulfate in the aqueous phase (I = 0; T = 25 ºC). 

NEA (2004) Vopálka et al. (2010) Vercouter et al. (2008)
3.15 ±
0.020.99 ±
0.07-1.12 ± 0.38
3.03 ±
0.310.92 ±
0.25-2.17 ± 0.25
2.45 ±
0.051.03 ±
0.040.76 ± 0.20

The predictions using the stability constants given by the NEA database (NEA, 2004) and Vopálka et al. (2010) are quite similar for a broad operating range ([SO42-] ≤ 1.0 M); after this limit, however, deviations are verified in the speciation of the anionic species because the stability constants K3 differ significantly. On the other hand, a huge discrepancy for any concentration level is observed by comparing the predictions for all aqueous species by using the stability constants given by Vercouter et al. (2008); according to these authors, the fluorescence features of the sulfate complexes were observed to depend on the ionic conditions and changes in the coordination mode (mono- and bidentate) of the sulfate ligands may explain such observations.

According to the theoretical distribution shown in Figure 1, the predominance of species UO2SO4 and UO2(SO4)22- is expected. The occurrence of UO22+ and UO2(SO4)34- is significant only if calculations are done using the stability constants given by Vercouter et al. (2008). Therefore, neutral and both anionic species may preferentially compete to be extracted by Alamine 336, given that it is a water insoluble extractant that is capable of forming oil soluble salts of anionic species at a low pH. As shown in Figure 2, species HSO4- and SO42- predominate in the aqueous phase at 0 ≤ pH ≤ 0.54, so these species may compete to protonate the molecules of Alamine 336 (Shmidt, 1971).

Figure 2 Speciation diagram of sulfuric acid ([S]total = 0.5 M; stability constants given by Eqs. (4) and (5); T = 25 ºC). 

Based on such assumptions, the following reactions were considered to occur in the solvent extraction of uranium (VI) with Alamine 336:

- Protonation of Alamine 336 with dissociated sulfuric acid species HSO4- and SO42-

H+(aq)+HSO4(aq)+R3N(org)(R3NH+)HSO4(org),K6 (6)

2H+(aq)+SO42(aq)+2R3N(org)(R3NH+)2SO42(org),K7 (7)

- Reactions between the protonated amine species with neutral species of uranium (VI) sulfate

UO2SO4(aq)+2(R3NH+)HSO4(org)(R3NH+)2UO2(SO4)22(org)+H+(aq)+HSO4(aq),K8 (8)

UO2SO4(aq)+(R3NH+)2SO42(org)(R3NH+)2UO2(SO4)22(org),K9 (9)

- Reactions between the protonated amine species with anionic species of uranium (VI) sulfate

UO2(SO4)22(aq)+2(R3NH+)HSO4(org)(R3NH+)2UO2(SO4)22(org)+2HSO4(aq),K10 (10)

UO2(SO4)22(aq)+(R3NH+)2SO42(org)(R3NH+)2UO2(SO4)22(org)+SO42(aq),K11 (11)

UO2(SO4)34(aq)+4(R3NH+)HSO4(org)(R3NH+)2UO2(SO4)34(org)+4HSO4(aq),K12 (12)

UO2(SO4)34(aq)+2(R3NH+)2SO42(org)(R3NH+)4UO2(SO4)34(org)+2SO42(aq),K13 (13)

According to the reaction scheme considered, the distribution coefficient of uranium (DU) is determined by the following equation:

DU=[(R3NH+)2UO2(SO4)22]+[(R3NH+)4UO2(SO4)43][UO22+]+[UO2SO4]+[UO2(SO4)22]+[UO2(SO4)43] (14)

Equations (8) and (10), as well as Eqs. (9) and (11), are not independent and can be derived by combining them with Eq. (2). Substituting Eqs. (1)-(13) in Eq. (14), the following expression is derived:

DU=KaR3N2H+2+KbR3N4H+4SO241K1K2SO242+1K2SO24+1+K3SO24 (15)

where (i) Ka = K62K8/(K2K5) = K62K10 if equilibrium is governed by Eq. (8) or Eq. (10), (ii) Ka = K7K9/K2 = K7K11 if equilibrium is governed by Eq. (9) or Eq. (11), (iii) Kb = K3K64K12 if equilibrium is governed by Eq. (12), and (iv) Kb = K3K72K13 if equilibrium is governed by Eq. (13). Equation (15) depends on the concentration of the extractant, protons, and sulfate ions in the equilibrium and must be fitted to experimental data. Stability constants K1 to K3 are given by the NEA database (NEA, 2004) values shown in Table 1, while Ka and Kb are parameters to be determined by data fitting. No activity coefficient was considered and the model does not presume the aggregation of amine salts in the organic phase.

The concentration of free extractant in the organic phase is proportional to the mass balance of total uranium extracted from the aqueous phase given by:

[R3N]=[R3N]initialm([U]initial[U]) (16)

where m = 1, 2 or 4 corresponds to the stoichiometric coefficient of extractant in Eqs. (8) to (13).



The aqueous solutions were obtained by dissolving an uranium concentrate (a mixture of NH4U2O7 and Na2U2O3) supplied by INB (82.4%w/w of U3O8) in sulfuric acid (Vetec, purity of 98%w/w) dissolved in deionized water. The organic solutions were prepared by dissolving Alamine 336 (N,N-dioctyloctan-1-amine, Cognis Brazil S.A., purity of 95-100%, used without further purification) in kerosene Exxsol D-100 (Exxon Chemicals, 100% aliphatic) and 5% v/v of tridecanol (Cognis Brazil S.A., commercial grade) as a modifier agent. The concentration of the modifier was determined using a titration method (Ritcey, 2006). All other chemicals used in the experiments were of analytical grade.

Extraction Conditions

The batch solvent extraction experiments were carried out by bringing equal volumes of aqueous and organic solutions (30 mL each) into contact in a glass reactor (A/O volumetric ratio of unity), at room temperature (25±2) ºC and 0 ≤ pH ≤ 0.54. Both phases were combined for 5 minutes by mechanical stirring (180 rpm) using a glass marine-type impeller. After equilibration, phase separation was carried out using a separating funnel.

In the tests without chloride ions in the aqueous phase, the initial concentrations of uranium and sulfate ions in the aqueous phase varied respectively from 2x10-3 to 9x10-3 M (concentration levels [U] = 0.46, 1.0, 1.6 and 2.1 g.L-1 were used), and from 0.25 to 1.00 M (concentration levels [SO42-] = 23, 46, 68 and 95 g.L-1 were used). In the tests with chloride ions in the aqueous phase, the initial concentration of uranium in the aqueous phase was kept constant at 9x10-3 M ([U] = 2.1 g.L-1), while those of sulfate and chloride ions varied from 0.25 to 1.00 M (concentration levels [SO42-] = 23, 46, 68 and 95 g.L-1 were used), and from 0.03 to 0.20 M (concentration levels [Cl-] = 1, 3, 5 and 7 g.L-1 were used), respectively. The following initial concentrations of Alamine 336 in the organic phase were used: 0.05, 0.10, 0.15 and 0.20 M. Such concentration levels in both phases are similar to those verified at the INB uranium plant in the city of Caetité, Brazil.

Analytical Methods

The total concentration of uranium in the aqueous phase was determined using the method of retarded neutrons (IPR R-1 Triga Mark research reactor of CDTN, accuracy 95%). The uranium concentration in the organic phase was calculated by mass balance difference. Analysis of total sulfate species in the aqueous phase was carried out by a gravimetric method (Weast and Astle, 1983), while chloride ion concentrations were measured using an ion selective electrode (Orion). The pH of the aqueous phase was measured before and after equilibration using a pH meter (Digimed, model DM-20). No third phase formation could be observed.


Data Fitting Results

In an attempt to obtain the unknown equilibrium constants Ka and Kb, experimental data were fitted to Eq. (15), using the Statistica software; however, no successful fitting was obtained. In fact, different results were obtained according to the optimization method used (Quasi-Newton, Hooke-Jeeves, Rosenbrock, and Simplex methods were tested) as well as to the initial guess value, thus indicating the existence of correlated constants in the proposed model.

Hence, to identify the predominant species involved in the extraction of uranium using Alamine 336, Eq. (15) was then fitted in parts, i.e., it was assumed that equilibrium occurs with only one species in the organic phase and only one species in the aqueous phase. In this manner, 16 distinct equations can be derived from Eqs. (15) and (16). Taking the logarithms of those equations, fitting was carried out by plotting log(DU) data versus log([R3N]2[H+]2[SO42-]n) if species (R3NH+)2UO2(SO4)22- is predominant in the organic phase according to (i) Eq. (8) or Eq. (10) (m = 2), or (ii) Eq. (9) or Eq. (11) (m = 1), or as log(DU) versus log([R3N]4[H+]4[SO42-]n+2) if species (R3NH+)4UO2(SO4)34- is predominant in the organic phase according to (iii) Eq. (12) (m = 4), or (iv) Eq. (13) (m = 2). In those fittings, n = 2 if equilibrium occurs with species UO22+ in the aqueous phase, n = 1 if it occurs with UO2SO4 species, n = 0 if it occurs with UO2(SO4)22- species, or n = -1 if the UO2(SO4)34- species predominates in the aqueous phase.

Fitting results are shown in Figure 3, which illustrates that equilibrium may occur predominantly between (R3NH+)2UO2(SO4)22- and aqueous species UO2(SO4)22- given that, in these cases, only a straight line with an angular coefficient relatively near unity and satisfactory R2 coefficient was obtained (see data fitting in Figures 3(a)-3(b)). It was found that the extraction of uranium (VI) sulfate with Alamine 336 is satisfactorily described by Eq. (8) or Eq. (10), as well as by Eqs. (9) or (11). However, in both cases, a better fitting is obtained when aqueous species UO2SO4 and UO2(SO4)22- are considered, giving log(Ka) ≈ 5, despite the relatively lower R2 coefficient as observed in Figure 4. Perhaps all these reactions may occur simultaneously to changing extents depending on the operating condition, corroborating Ritcey (2006). Therefore, based on the present analysis, uranium (VI) could be extracted by Alamine 336 as UO2SO4 and/or as UO2(SO4)22-, forming (R3NH+)2UO2(SO4)22-. According to data fitting shown in Figure 3(c)-3(d), equilibrium may not occur with the species (R3NH+)4UO2(SO4)34- and reactions given by Eqs. (12)-(13) are not valid for the operating conditions studied. This observation is inconsistent with the previously published literature and the mechanism may depend on acidity (Sato, 1963; Shmidt, 1971; Collet et al., 2009). Highly scattered data (low R2 coefficient) were obtained with n = 2 (equilibrium with aqueous species UO22+) and these data were not displayed in Figure 3.

Figure 3 Data fitting presuming the predominance of only one single species in each phase: Equilibrium between (R3NH+)2UO2(SO4)22- and UO2SO4 (n = 1, green) or UO2(SO4)22- (n = 0, blue) or UO2(SO4)34- (n = -1, red) given by (a) Eq. (8) or Eq. (10) with m = 2, and (b) Eq. (9) or Eq. (11) with m = 1; Equilibrium between (R3NH+)4UO2(SO4)34- and UO2SO4 (n = 1, green) or UO2(SO4)22- (n = 0, blue) or UO2(SO4)34- (n = -1, red) given by (c) Eq. (12) with m = 4, and (d) Eq. (13) with m = 2 (0 ≤ pH ≤ 0.54; T = 25 ºC). 

Figure 4 Data fitting presuming equilibrium between (R3NH+)2UO2(SO4)22- in the organic phase and aqueous species UO2SO4 and UO2(SO4)22- (0 ≤ pH ≤ 0.54; T = 25 ºC). 

Alamine 336 is expected to be fully protonated under the operating conditions studied (0 ≤ pH ≤ 0.54). The reaction of protonation, Eq. (6), leads to the extraction of HSO4- ions from the aqueous phase, thus favoring the consumption of SO42- ions; such consumption is also expected for the protonation of Alamine according to Eq. (7). Consequently, Eq. (3) most likely occurs from the right to the left, as long as UO2SO4 and UO2(SO4)22- species are preferentially being extracted by Alamine 336.

Experimental Results

The effect of initial concentrations of Alamine 336 and sulfate ions on the extraction of uranium (VI) is shown in Figure 5. In this figure, simulations obtained using the equilibrium model, Eqs. (8) or (10), proposed by the present study are also included for comparison. In fact, a relative deviation of 8.4% was obtained between simulations and experimental data.

Figure 5 Effect of initial concentrations of sulfate ions and extractant on the extraction of uranium (VI) with Alamine 336 ([U]initial = 0.007 M; 0 ≤ pH ≤ 0.54; [Cl-] = 0 M; T = 25 ºC; continuous lines were calculated using Eq. (8) or Eq. (10)). 

As expected, the higher uranium extraction observed when the extractant concentration increased is due to the larger amount of reagent in the organic phase when in contact with the aqueous phase. Higher concentrations of extractant may raise the viscosity of the organic phase and even result in the formation of molecular aggregates (Elhassadi and Do, 1986; Subba Rao et al., 2002); however, none of these effects produced a negative impact on the efficiency of uranium extraction within the investigated operating conditions. On the contrary, the increase in the initial concentration of sulfate ions resulted in a reduced extraction of uranium, probably due to a competitive extraction of SO42- and uranium (VI). As shown in Figure 1, and according to Eq. (3), a higher concentration of sulfate ions in the aqueous phase may in fact favor the formation of UO2(SO4)34- species, which are not preferentially extracted by Alamine 336. In addition, as given by Eq. (11), the extraction of anionic UO2(SO4)22- species involves the release of sulfate ions into the aqueous phase, thus contributing to a reduction in uranium extraction. The effect of initial concentration of uranium was not pronounced for the operating range investigated; therefore, tests with chloride ions in the aqueous phase were carried out at a fixed concentration level for uranium ([U] = 2.1 g.L-1).

The effect of chloride ions on the extraction of uranium using Alamine 336 at changing concentrations of extractant and sulfate ions is shown in Figure 6. It can be observed that the presence of chloride ions is quite harmful, because the uranium extraction efficiency drops significantly when the concentration of chloride ions in the aqueous phase increases. This behavior is enhanced when the concentration of sulfate ions is increased. The same negative impact on the extraction of uranium was verified when using a mixed solvent containing D2EHPA and Alamine 336 (Quinn et al., 2013). Therefore, to maintain the uranium extraction at higher levels, it is necessary to raise the concentration of Alamine 336 in the organic phase. This procedure may well result in higher operating costs, which may be prohibitive under the given conditions. The need for more extractant, aimed at maintaining the level of uranium extraction, is an indication that chloride ions may have a direct reaction with Alamine 336, possibly competing with the anionic UO2(SO4)22- species and/or affecting the protonation reaction. However, speciation calculations ([U]total = 0.01 M; [Cl-] = 0.10 M; T = 25 ºC) including the species UO2Cl+ (equilibrium given by UO22+(aq) + Cl-(aq) ⇆ UO2Cl+(aq), log K = 0.170) (NEA, 2004) and UO2Cl2 (equilibrium given by UO2Cl+(aq) + Cl-(aq) ⇆ UO2Cl2 (aq), log K = -1.100) (NEA, 2004) indicate that the presence of uranium (VI) chloride species is negligible for the operating conditions studied due to the presence of sulfate ions in the aqueous solution.

Figure 6 Effect of initial concentration of chloride ions on the extraction of uranium with Alamine 336 ([U]total = 0.002 M; 0 ≤ pH ≤ 0.54; T = 25 ºC). 


The extraction of uranium from aqueous sulfate solutions using Alamine 336 as an extractant was investigated at typical concentration levels found in the uranium plant of INB (Caetité, Brazil). The following main conclusions could be drawn:

  • Species distribution calculations in the aqueous phase revealed that concentrations of UO22+, UO2Cl+, and UO2Cl2 are negligible within the evaluated condition ([U]total = 0.01 M; 0 ≤ pH ≤ 0.54; [Cl-] = 0.10 M; T = 25 ºC). Species UO2SO4 and UO2(SO4)22- predominate within the operating conditions (-2.5 ≤ log([SO42-]) ≤ -0.8 M), with an increase of UO2(SO4)34- species within the concentration conditions;

  • Uranium (VI) is extracted by Alamine 336 as UO2SO4 and UO2(SO4)22-, forming (R3NH+)2UO2(SO4)22- in the organic phase according to Eqs. (8) or (10) and/or Eqs. (9) or (11). The extraction of species UO2(SO4)34- seems improbable for the operating conditions investigated;

  • The efficiency of uranium extraction by Alamine 336 is significantly reduced when the concentrations of sulfate and chloride ions increase.


The authors wish to acknowledge the Brazilian agencies FAPEMIG (PRONEM 16/2010, APQ-04026-10), CNPq, CAPES-PROEX and INCT Acqua ( for the financial support, and Indústrias Nucleares do Brasil S.A. (INB) for cooperation.


Collet, S., Chagnes, A., Courtaud, B., Thiry, J., Cote, G., Solvent extraction of uranium from acidic sulfate media by Alamine 336: Computer simulation and optimization of the flow-sheets. Journal of Chemical Technology and Biotechnology, 84, 1331-1377 (2009). [ Links ]

du Preez, J. G. H., Rohwer, H. E., Shillington, D. P., Polynitrogen reagents, in metal separation. Part 5 The extraction of uranium(VI) from sulphuric, nitric and hydrochloric acid media with alkyldiammonium extractants. Solvent Extraction and Ion Exchange, 3, 217-233 (1985). [ Links ]

Elhassadi, A. A., Do, D. D., Effects of a carrier and its diluent on the transport of metals across supported liquid membranes (SLM). II. Viscosity effect. Separation Science and Technology, 21, 285-297 (1986). [ Links ]

Free, M. L., Hydrometallurgy: Fundamentals and Applications. 1st Ed., John Wiley & Sons (2013). [ Links ]

Gomiero, L. A., Filho, W., Veras, A., Cunha, J. W., Morais, C. A., Converting the Caetité mill process to enhance uranium recovery and expand production. In: Proc. of the Int. Symposium on Uranium Raw Material for Nuclear Fuel Cycle, Vienna, Austria (2009). [ Links ]

IAEA, (International Atomic Energy Agency), Uranium extraction technology. Technical Reports Series No359, Vienna, Austria, p. 359 (1993). <> [ Links ]

Kumar, J. R., Kim, J. -S., Lee, J. -Y., Yoon, H. -S., A brief review on solvent extraction of uranium from acidic solutions. Separation & Purification Reviews, 40, 77-125 (2011). [ Links ]

Lakshmi, D. S., Mohapatra, P. K., Mohan, D., Manchanda, V. K., Uranium transport using a PTFE flat-sheet membrane containing Alamine 336 in toluene as the carrier. Desalination, 163, 13-18 (2004). [ Links ]

Mackenzie, J. M. W., Uranium solvent extraction using ternary amines. In: Uranium Ore Yellow Cake Seminar, Melbourne, Australia (1997). [ Links ]

Morais, C. A., Gomiero, L. A., Uranium stripping from tertiary amine loaded solution by ammonium sulfate. Minerals Engineering, 18, 1277-1281 (2005). [ Links ]

NEA, (Nuclear Energy Agency), Chemical thermodynamics of uranium. OECD, France, p. 735 (2004). [ Links ]

Quinn, J. E., Wilkins, D., Soldenhoff, K. H., Solvent extraction of uranium from saline leach liquors using DEHPA/Alamine 336 mixed reagent. Hydrometallurgy, 134-135, 74-79 (2013). [ Links ]

Ritcey, G. M., Solvent Extraction - Principles and Applications to Process Metallurgy. 2nd Ed., volume I, Ottawa, Canada (2006). [ Links ]

Sato, T., The extraction of uranium (VI) from sulfuric acid solutions by tri-n-octylamine. Journal of Inorganic and Nuclear Chemistry, 25, 441-446 (1963). [ Links ]

Shmidt, V. S., Amine Extraction. Keter Press, Israel (1971). [ Links ]

Subba Rao, R. V., Sivakumar, P., Natarajan, R., Vasudeva Rao, P. R., Effect of Aliquat 336 concentration on transportation of hydrochloric acid across supported liquid membrane. Journal of Radioanalytical and Nuclear Chemistry, 252, 95-98 (2002). [ Links ]

Vercouter, T., Vitorge, P., Amekraz, B., Moulin, C., Stoichiometries and thermodynamic stabilities for aqueous sulfate complexes of U(VI). Inorganic Chemistry, 47, 2180-2189 (2008). [ Links ]

Vopálka, D., Stamberg, K., Motl, A., Drtinová, B., The study of the speciation of uranyl-sulphate complexes by UV-Vis absorption spectra decomposition. Journal of Radioanalytical and Nuclear Chemistry, 286, 681-686 (2010). [ Links ]

Weast, R. C., Astle, M. J., CRC Handbook of Chemistry and Physics. 63rd Ed., CRC Press Inc., Florida, USA (1983). [ Links ]

Yakubu, N. A., Dudeney, A. W. L., A study of uranium solvent extraction equilibria with Alamine 336 in kerosene. Hydrometallurgy, 18, 93-104 (1987). [ Links ]

Received: May 12, 2015; Revised: September 08, 2015; Accepted: November 02, 2015

* E-mail:

* To whom correspondence should be addressed

Creative Commons License This is an Open Access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.