Abstract
This study investigates the potential of naturally occurring biodegradable fibers for use as building thermal insulation. The use of biodegradable building thermal insulation would alleviate the environmental problems presently associated with the disposal of currently used man-made non-biodegradable thermal insulations. The apparent thermal conductivity(lambda) for biodegradable coconut and sugarcane fiber were investigated in accordance with ASTM C 518 over the density ranges 40 kg/m³ to 90 kg/m³ and 70 kg/m³ to 120 kg/m³ for the test temperature ranges 13.2ºC to 21.8ºC and 18ºC to 32ºC, respectively. The experimental data were used to determine empirical equations for lambda variation with density and temperature for both coconut and sugarcane fiber. Comparison of l at 24ºC for coconut and sugarcane fiber were made with seven different conventional insulation from published data. The results indicated that the minimum lambda for both coconut and sugarcane fiber are within the range normally associated with building thermal insulation. The lambda variation with density and mean temperature for both coconut and sugarcane fiber were consistent with the behavior of loose-fill thermal insulation.
Fibrous insulation; building insulation; coconut fiber; sugarcane fiber
TECHNICAL PAPERS
Biodegradable fibrous thermal insulation
Krishpersad Manohar; Dale Ramlakhan; Gurmohan Kochhar; Subhas Haldar
Dept. of Mechanical and Manufacturing; The University of the West Indies; St. Augustine, Trinidad, West Indies; kmanohar@eng.uwi.tt
ABSTRACT
This study investigates the potential of naturally occurring biodegradable fibers for use as building thermal insulation. The use of biodegradable building thermal insulation would alleviate the environmental problems presently associated with the disposal of currently used man-made non-biodegradable thermal insulations. The apparent thermal conductivity(l) for biodegradable coconut and sugarcane fiber were investigated in accordance with ASTM C 518 over the density ranges 40 kg/m3 to 90 kg/m3 and 70 kg/m3 to 120 kg/m3 for the test temperature ranges 13.2ºC to 21.8ºC and 18ºC to 32ºC, respectively. The experimental data were used to determine empirical equations for l variation with density and temperature for both coconut and sugarcane fiber. Comparison of l at 24ºC for coconut and sugarcane fiber were made with seven different conventional insulation from published data. The results indicated that the minimum l for both coconut and sugarcane fiber are within the range normally associated with building thermal insulation. The l variation with density and mean temperature for both coconut and sugarcane fiber were consistent with the behavior of loose-fill thermal insulation.
Keywords: Fibrous insulation, building insulation, coconut fiber, sugarcane fiber
Introduction
In recent years retrofitting, refurbishing, reconstructing and upgrading existing structures has seen a growing volume of discarded insulation for disposal. The man-made non-biodegradable materials are fast filling the landfills and becoming a problem for disposal. This is creating an environmental problem for developing countries which do not have the proper facilities to accommodate or recycle material. Factoring in the environmental issue has turned research towards finding biodegradable environmentally friendly insulation.
The aim of this research is to investigate the potential of indigenous biodegradable fibrous materials (coconut fiber and sugarcane fiber) for use as building thermal insulation. In most tropical developing countries, coconut and sugarcane fiber are by-products of the coconut and sugarcane industries and these materials usually go to waste.
Nomenclature
a = constant
b = constant
c = constant
d = constant
e = constants
T = Temperature, ºC, K
Greek Symbols
l = apparent thermal conductivity, W/m.K
w(T) = expression for temperature dependance
r = density, kg/m3
Biodegradable Thermal Insulation
The term biodegradable in this study refers to material that occur naturally in nature and when disposed off will decompose without causing any adverse effects on the environment. In this context by-products from the agricultural industry were considered. The waste material from the copra (coconut processing) industry showed a high degree of fibrous content. When shredded the resulting coconut fiber showed physical properties of fibers with a mean diameter of 0.267 mm with a range between 0.104 mm to 0.502 mm and a standard deviation of 9.04 x 10-2 (CARIRI project report, 1996). When arranged in a slab-like form as a thermal insulation batt the minimum density of coconut fiber without settling was 40 kg/m3 (Kochhar and Manohar, 1997).
By products from the sugarcane industry were also looked at for use as thermal insulation. Sugarcane fiber (bagasse) consists of fibers of mean diameter 0.313 mm with a range between 0.156 mm to 0.504 mm and a standard deviation of 7.53 x 10-2 (CARIRI project report, 1996). When arranged in a slab-like form as a thermal insulation batt the minimum density of sugarcane fiber without settling was 70 kg/m3 (Kochhar and Manohar, 1997).
Thermal Conductivity Measurement
The thermal insulating properties of coconut fiber and sugarcane fiber were measured in accordance with ASTM C518 where the apparent thermal conductivity, l, were measured under steady-state one-dimensional test conditions with heat flow upwards (Kochhar and Manohar, 1997). The test equipment used constant temperature plate 305 mm x 305 mm with a centrally located 102 mm x 102 mm heat flux transducers. The test equipment provided l measurements with ±0.2% repeatability and ±0.5% reproducibility within the range 0.005 W/m.K to 0.35 W/m.K (LaserComp FOX 304, 1994).
Thermal conductivity measurements were conducted on 52 mm thick, 254 mm square test specimens. The specimens were contained in a polystyrene specimen holder constructed from 25.4 mm thick polystyrene strips, 52 mm high. Coconut and sugarcane fiber samples were randomly selected from two respective stockpiles of air-dried material. The minimum test density for each material was determined by the lowest possible density for which the material existed under gravity without any appreciable settling. The clamping force between the constant temperature plates of the test equipment determined the upper test density limit.
For coconut fiber thermal conductivity tests were conducted at mean test temperatures of 15.6ºC with a temperature difference of 16.3ºC and 21.8ºC with a temperature difference of 13.2ºC. For these test conditions three tests were conducted on each specimen of density 40 kg/m3, 50 kg/m3, 60 kg/m3, 70 kg/m3, 80 kg/m3, and 90 kg/m3. The mean values of the experimental test results for coconut fiber are shown on Table 1.
For sugarcane fiber thermal conductivity tests were conducted at mean test temperatures of 18ºC, 24ºC and 32ºC with a temperature difference of 22ºC in each case. For these test conditions three tests were conducted on each specimen of density 70 kg/m3, 80 kg/m3, 90 kg/m3, 100 kg/m3, 110 kg/m3, and 120 kg/m3. The mean values of the experimental test results for sugarcane fiber are shown on Table 2.
The experimental results for both coconut and sugarcane fibers indicated the general trend associated with loose-fill thermal insulation (Bankvall, 1973; Pratt, 1978). That is, as density increases from the minimum possible value upwards, l decreases to a minimum and then increases. Therefore, the l variation with density should satisfy the general empirical relationship associated with this characteristic behavior of materials of this nature as given in Eq.(1) (Bankvall, 1974).
Using the Method of Least Squares, the experimental data for coconut fiber and sugarcane fiber for each test condition were fitted in the form of Equation (1) and the empirical constants were determined. The resulting equations are as follows:
Coconut Fiber 15.6ºC mean test temperature;
Coconut Fiber 21.8ºC mean test temperature;
Sugarcane Fiber 18ºC mean test temperature;
Sugarcane Fiber 24ºC mean test temperature;
Sugarcane Fiber 32ºC mean test temperature;
Another characteristic feature of lose-fill insulation is an increase of l with mean test temperature (Manohar, Yarbrough and Kochhar, 2000). In general, the experimental results for both coconut fiber and sugarcane fiber showed linearly increasing l with temperature. In order to determine l variation with mean test temperature, the respective coefficients of a, b, and c, from the isothermal equations for both coconut and sugarcane fiber were fitted to a relationship of the general form;
where w(T) is an expression for temperature dependance, d and e are constants, and T is the temperature. This resulted in general empirical relationships for determining l in terms of temperature and specimen density for coconut and sugarcane fiber.
Coconut Fiber:
Sugarcane Fiber:
Comparison of Thermal Conductivity Data
The general empirical relationships from equations (8) and (9) were used to calculate the apparent thermal conductivity for coconut and sugarcane fiber, respectively, at a mean test temperature of 24ºC. Thermal conductivity values were determined for the respective test densities and are given on Tables 3 and 4.
This data was compared with published results for kapok, jute (Stephenson and Mark, 1961), glass fiber (Battacharyya, 1980), air-filled foam (Glicksman, 1994), molded polystyrene, cellulose, and rock wool (Tye et al., 1980). A graphical interpretation of the results is shown in Figure 1.
Discussion
Experimental data at various mean test temperatures show the thermal conductivity variation with density for coconut fiber and sugarcane fiber followed the characteristic hooked shape associated with loose-fill fibrous insulation. The l variation with density for coconut fiber showed the minimum l value at a density of 80 kg/m3 for experiments conducted at mean test temperatures of 15.6ºC and 21.8ºC. For sugarcane fiber the minimum l value occurred at a density of 100 kg/m3 for tests conducted at mean temperatures of 18ºC, 24ºC and 32ºC. For both material the minimum l showed an increase with mean test temperature which is consistent with the behavior of loose-fill thermal insulation (Pratt, 1978). The empirical relationships for the l variation with temperature and density for coconut and sugarcane fiber indicated behavior consistent with loose-fill insulating materials.
The minimum l for coconut and sugarcane fiber ranged between 0.048 W/m.K to 0.049 W/m.K and 0.046 W/m.K to 0.049 W/m.K over the temperature ranges 15.6ºC to 21.8ºC and 18ºC to 32ºC, respectively. Comparison of the minimum l of coconut and sugarcane fiber with different loose-fill materials from Figure 1 showed a l difference ranging from 0.006 W/m.K with cellulose to 0.014 W/m.K with jute. Comparison of the minimum l with the closed cell materials from Figure 1 showed a l difference ranging from 0.014 W/m.K with molded polystyrene to 0.016 W/m.K with air-filled foam.
From the seven comparative insulation materials listed the percentage difference in l ranged from 12.5% to 33% which indicated that coconut and sugarcane fiber are within the range of materials normally used for building thermal insulation.
These naturally occurring materials have the advantage of being environmentally friendly (biodegradable). However, consideration has to be given to the flammability of the materials and the higher density at which l is minimum. Also, susceptibility to insect attack and fungal growth over long time periods need to be investigated.
Conclusions
Coconut fiber and sugarcane fiber have acceptable l values for use as building thermal insulation.
The optimum l values at 24ºC averaged about 0.0488 W/m.K and 0.0483 W/m.K for coconut and sugarcane fiber, respectively.
The l of both coconut and sugarcane fiber increased with temperature within the test range of 15.6ºC to 32ºC. This behavior is consistent with loose fill insulating material.
Both coconut and sugarcane fiber exhibited the hooked shape graph of thermal conductivity with density. This behavior is consistent with loose fill insulating material.
Both materials have the advantage of being environmentally friendly (biodegradable).
Paper accepted September, 2005.
Technical Editor: Atila P. Silva Freire.
- Bankvall, C., 1973, "Heat Transmission in Fibrous Materials," Journal of Testing and Evaluation, Vol. 1, No. 3, pp. 235-243.
- Bankvall, C., 1974, "Mechanism of Heat Transfer in Permiable Insulation and their Investigation in a Special Guarded Hot Plate," Heat Transmission Measurements in Thermal Insulation, American Society for Testing and Materials, ASTM STP 544, pp. 34-38.
- Bhattacharyya, R. K., 1980, "Heat Transfer Model for Fibrous Insulations," Thermal Insulation Performance, ASTM STP 718, D. L. McElroy and R. P. Tye, Eds., American Society for Testing and Materials, pp. 272-286.
- CARIRI Service Project Report, 1996, "Investigation of Sugarcane and Coconut Fiber'. Tunapuna, Trinidad and Tobago: Caribbean Industrial Research Institute; Report No. 794/796.
- Glicksman, L. R., 1994, "Heat Transfer in Foams," Low Density Cellular Plastics; Physical Basis of Behavior, N. C. Hilyard and A. Cunningham, Eds., pp. 104-152.
- Kochhar, G. S., and Manohar, K., 1997, "Use of Coconut Fiber as a Low-Cost Thermal Insulator," Insulation Materials: Testing and Applications: Third Volume, ASTM STP 1320, R. S. Graves and R. R. Zarr, Eds., American Society for Testing and Materials, pp. 283-291.
- LaserComp FOX 304, 1994, "Heat Flow Meter Thermal Conductivity Instrument," Information Sheet, LaserComp; Wakefield, MA, USA.
- Manohar, K., Yarbrough, D. W., and Kochhar, G. S., 2000, "Building Thermal Insulation Biodegradable Sugarcane and Coconut Fiber," Journal of Thermal Envelope and Building Science, Vol. 23, No. 3, pp. 263-276.
- Pratt, A. W., 1978, Heat Transmission in Buildings, John Wiley and Sons Interscience Publication, London, pp. 31-42.
- Stephenson, M. E., and Mark, M., 1961, "Thermal Conductivity of Porous Materials," ASHRAE Journal, Vol. 1, pp. 75-81.
- Tye, R. P., Ashars, E., Guyer, E. C., and Sharon, A. C., 1980, "An Assessment of Thermal Insulation Materials for Building Applications," Thermal Insulation Performance, ASTM STP 718, D. L. McElroy and R. P. Tye, Eds., American Society for Testing and Materials, pp. 9-26.
Publication Dates
-
Publication in this collection
20 Mar 2006 -
Date of issue
Mar 2006
History
-
Received
Sept 2005
