Acessibilidade / Reportar erro

Recent developments of some asymptotic methods and their applications for nonlinear vibration equations in engineering problems: a review

Abstract

This review features a survey of some recent developments in asymptotic techniques and new developments, which are valid not only for weakly nonlinear equations, but also for strongly ones. Further, the achieved approximate analytical solutions are valid for the whole solution domain. The limitations of traditional perturbation methods are illustrated, various modified perturbation techniques are proposed, and some mathematical tools such as variational theory, homotopy technology, and iteration technique are introduced to over-come the shortcomings.In this review we have applied different powerful analytical methods to solve high nonlinear problems in engineering vibrations. Some patterns are given to illustrate the effectiveness and convenience of the methodologies.

Nonlinear Vibration; Nonlinear Response; Analytical Methods; Parameter Perturbation Method (PPM); Variational Iteration Method(VIM); Homotopy Perturbation Method (HPM); Iteration Perturbation Method (IPM); Energy Balance Method (EBM); Parameter-Expansion Method (PEM); Variational Approach (VA); Improved Amplitude Frequency Formulation (IAFF); Max-Min Approach (MMA); Hamiltonian Approach (HA); Homotopy Analysis Method (HAM); Review


Recent developments of some asymptotic methods and their applications for nonlinear vibration equations in engineering problems: a review

Mahmoud BayatI, *; Iman PakarI; Ganji DomairryII

IDepartment of Civil Engineering, Mashhad Branch, Islamic Azad University, Mashhad, Iran Tel/Fax : (+98 111 3234205)

IIDepartment of Mechanical Engineering, Babol University of Technology, Babol, Iran

ABSTRACT

This review features a survey of some recent developments in asymptotic techniques and new developments, which are valid not only for weakly nonlinear equations, but also for strongly ones. Further, the achieved approximate analytical solutions are valid for the whole solution domain. The limitations of traditional perturbation methods are illustrated, various modified perturbation techniques are proposed, and some mathematical tools such as variational theory, homotopy technology, and iteration technique are introduced to over-come the shortcomings.In this review we have applied different powerful analytical methods to solve high nonlinear problems in engineering vibrations. Some patterns are given to illustrate the effectiveness and convenience of the methodologies.

Keywords: Nonlinear Vibration; Nonlinear Response; Analytical Methods; Parameter Perturbation Method (PPM); Variational Iteration Method(VIM); Homotopy Perturbation Method (HPM); Iteration Perturbation Method (IPM); Energy Balance Method (EBM); Parameter-Expansion Method (PEM); Variational Approach (VA); Improved Amplitude Frequency Formulation (IAFF); Max-Min Approach (MMA); Hamiltonian Approach (HA); Homotopy Analysis Method (HAM); Review

1 INTRODUCTION

Most of engineering problems, especially some oscillation equations are nonlinear, and in most cases it is difficult to solve such equations, especially analytically. Recently, nonlinear oscillator models have been widely considered in physics and engineering. It is obvious that there are many nonlinear equations in the study of different branches of science which do not have analytical solutions. Due to the limitation of existing exact solutions, many analytical and numerical approaches have been investigated. Therefore, these nonlinear equations must be solved using other methods. Many researchers have been working on various analytical methods for solving nonlinear oscillation systems in the last decades. Perturbation technique is one the well- known methods [3, 11, 34, 37, 39, 85], the traditional perturbation method contains many shortcomings. They are not useful for strongly nonlinear equations, so for overcoming the shortcomings, many new techniques have been appeared in open literatures.

It should be mentioned that several books appeared on the subject of mathematical methods in engineering problem during the past decade [10, 48, 54, 77, 113, 125, 133, 137, 144–146, 180, 186, 187].

The aim of this article is to review the recent research on the approximate analytical methods for nonlinear vibrations. The applications of these methods have been appeared in open literatures in the last three years. There are hundreds of published papers too numerous to refer to all of them, but for the purpose of filling the gaps in the present summary, Refs [14, 15, 28, 30, 36, 40, 47, 55, 66, 75, 76, 83, 88, 89, 94, 142, 166, 170, 173, 178, 192, 193, 210, 217] may offer good help in overcoming the inevitable shortcomings in a condensed presentation. To show the efficiency and accuracy of the methods some comparisons have done with the results obtained by those methods and numerical methods and they are valid for whole domain. Some of the ideas first appeared in this review article, and most cited references were published in the last three years, revealing the most emerging research fronts. In this review, the basic idea of each method is presented then some examples are illustrated and discussed to show the application of these methods.

2 PARAMETERIZED PERTURBATION METHOD (PPM)

Recently, nonlinear oscillator models have been widely considered in physics and engineering. Study of nonlinear problems which are arisen in many areas of physics and also engineering is very significant for scientists. Surveys of the literature with numerous references have been given by many authors utilizing various analytical methods for solving nonlinear oscillation systems. Non-linear problems continue to be as a challenge, and heed has mainly concentrated on qualitative changes of systems bifurcations and instability. Parameterized Perturbation Method (PPM) is one of the well-known methods for solving nonlinear vibration equations. The method was proposed in by He in 1999 [80]. It was rarely used recently, but this method is a kind of powerful tool for treating weakly nonlinear problems, but they are less effective for analyzing strongly nonlinear problems [37, 50, 86, 92, 115, 160].

2.1 Basic idea of Parameterized Perturbation Method

For the nonlinear equation L(u) + N(u) = 0, where L and N are general linear and nonlinear differential operators respectively, a linear transformation can be introduced as:

We can assume that ν can be written as a power series in ε,as following

And

2.2 Application of Parameterized Perturbation Method

Two examples have considered showing the applicability of this method.

Example 1

Consider the following Duffing equation:

We let u = εν in Eq. (2.4) and obtain

Supposing that the solution of Eq. (2.5) and ω2 can be expressed in the form

Substituting Eqs. (2.6) and (2.7) into Eq. (2.5) and equating coefficients of like powers of ε yields the following equations

Solving Eq. (2.8) results in

Equation (2.9), therefore, can be re-written down as

Avoiding the presence of a secular terms needs:

Substituting Eq. (2.12) into Eq. (2.7)

Solving Eq. (2.11), gives:

Its first-order approximation is sufficient, and then we have:

The exact frequency of this problem is:

Example 2

We consider the following nonlinear oscillator [89];

We let u = ενin Eq. (2.17) and obtain

Supposing that the solution of Eq. (2.18) and ω2 can be expressed in the form

Substituting Eqs. (2.19) and (2.20) into Eq. (2.18) and equating coefficients of like powers of ε yields the following equations

Solving Eq. (2.21) results in

Equation (2.22), therefore, can be re-written down as

Or

We let

In Eq. (2.25) so that the secular term can be eliminated. Solving Eq. (2.25) yields;

Thus we obtain the first-order approximate solution of the original Eq. (2.17), which reads

Substituting Eq. (2.26) into Eq. (2.20) results in

Then we have;

Eq. (2.30) gives the same frequency as that resulting from the artificial parameter Linstedt-Poincare' method [89].

3 VARIATIONAL ITERATION METHOD (VIM)

Nonlinear phenomena play a crucial role in applied mechanics and physics. By solving nonlinear equations we can guide authors to know the described process deeply. But it is difficult for us to obtain the exact solution for these problems. In recent decades, there has been great development in the numerical analysis and exact solution for nonlinear partial equations. There are many standard methods for solving nonlinear partial differential equations. The variational iteration method was first proposed by He [82] used to obtain an approximate analytical solutions for nonlinear problems.In VIM in most cases only one iteration leads to high accuracy of the solution and it doesn't need any linearization or discretization, and large computational work. The VIM is useful to obtain exact and approximate solutions of linear and nonlinear differential equations [35, 57, 62, 99, 104, 117, 122, 136, 139, 153, 167, 177, 179, 184, 191, 202, 206]. We have considered three examples to show the implement of the VIM.

3.1 Basic idea of Variational Iteration Method

To illustrate its basic concepts of the new technique, we consider following general differential equation [82]:

Where, L is a linear operator, and N a nonlinear operator, g(x) an inhomogeneous or forcing term. According to the variational iteration method, we can construct a correct functional as follows:

Where λ is a general Lagrange multiplier, which can be identified optimally via the variational theory, the subscript n denotes the nth approximation, n is considered as a restricted variation, i.e. ~ = 0 n δu.

For linear problems, its exact solution can be obtained by only one iteration step due to the fact that the Lagrange multiplier can be exactly identified.

3.2 Application of Variational Iteration Method

Example 1

The equation of motion of a mass attached to the center of a stretched elastic wire in dimensionless is [181]:

With initial conditions

Assume that the angular frequency of the system (3.3) is ω, we have the following linearized equation:

So we can rewrite Eq. (3.3) in the form

Where g(u) = (1 - ω2)u -

Applying the variational iteration method, we can construct the following functional equation:

Where is considered as a restricted variation, i.e.,δ = 0.

Calculating variation with the respect to un and nothing thatδ(un) = 0. We have the following stationary conditions:

The Lagrange multiplier, therefore, can be identified as;

Substituting the identified multiplier into Eq. (3.7) results in the following iteration formula:

Assuming its initial approximate solution has the form

And substituting Eq. (3.11) into Eq. (3.3) leads to the following residual:

By the formulation (3.10), we can obtain

In order to ensure that no secular terms appear in u1, resonance must be avoided. To do so, the coefficient of cos(ωt) in Eq. (3.12) requires being zero, i.e.,

And period of oscillation for this system by variational iteration method is;

Example 2

For the second example, we consider Duffing equation:

With initial conditions

Assume that the angular frequency of the Eq. (3.16) is ω, we have the following linearized equation:

So we can rewrite Eq. (3.16) in the form

Where g(u) = u + εu3 - ω2u.

Applying the variational iteration method, we can construct the following functional equation:

Where is considered as a restricted variation, i.e.,δ = 0.

Calculating variation with the respect to un and nothing that δ(un) = 0. We have the following stationary conditions:

The Lagrange multiplier, therefore, can be identified as;

Substituting the identified multiplier into Eq. (3.20) results in the following iteration formula:

Assuming its initial approximate solution has the form

And substituting Eq. (3.24) into Eq. (3.16) leads to the following residual:

By the formulation (3.23), we can obtain

To avoid secular terms appear in u1,the coefficient of cos(ωt) in Eq. (3.25) requires being zero, i.e.

And period of this system is ;

The exact solution is [89]:

Where k = 0.5εA2/(1 + εA2) .

Example 3

The governing equation of Mathieu-Duffing system which is considered in this study is described by the following high-order nonlinear differential equation [45];

Where dots indicate differentiation with respect to the time (t), ε < < 1 is a small parameter, ϕ is the Parameter of nonlinearity and δ is the transient curve and can be defined as [45];

The initial condition considered in this study is defined by [45];

According to the VIM, we can construct the correction functional of Eq. (3.30) as follows

Where λ is General Lagrange multiplier.

Making the above correction functional stationary, we can obtain following stationary conditions

The Lagrange multiplier, can be identified as:

Leading to the following iteration formula

If, for example, the initial conditions are u(0) = 0.1 and (0) = 0, we began with u0(t) = 0.1, by the above iteration formula (3.33) we have the following approximate solutions

In the same way, we obtain as u2(t) follows:

And so on. In the same manner, the rest of the components of the iteration formula can be obtained.

Figures 3.1 to 3.3 indicate that the VIM experiences a high accuracy. The figures illustrate the time history diagram of the displacement, velocity and phase plan, respectively.





4 HOMOTOPY PERTURBATION METHOD (HPM)

Until recently, the application of the homotopy perturbation method in nonlinear problems has been devoted by scientists and engineers, because this method is to continuously deform a simple problem easy to solve into the difficult problem under study. The homotopy perturbation method proposed by He in 1999 [81]. Elementary introduction and interpretation of the method are given in the following publications [5, 9, 24, 27–33, 59, 63, 64, 68, 84, 91, 93, 95, 96, 98, 101, 102, 123, 148, 168, 174, 176, 208, 218]. HPM can solve a large class of nonlinear problems with approximations converging rapidly to accurate solutions. This method is the most effective and convenient one for both weakly and strongly nonlinear equations.

4.1 Basic idea of Homotopy Perturbation Method

To explain the basic idea of the HPM for solving nonlinear differential equations, one may consider the following nonlinear differential equation [81]:

That is subjected to the following boundary condition:

Where A is a general differential operator, B a boundary operator, f(r) is a known analytical function, Γ is the boundary of the solution domain(Ω), and ∂u/∂t denotes differentiation along the outwards normal to Γ. Generally, the operator A may be divided into two parts: a linear part L and a nonlinear part N. Therefore, Eq. (4.1) may be rewritten as follows:

In cases where the nonlinear Eq. (4.1) includes no small parameter, one may construct the following homotopy equation

Where

In Eq. (4.4), p ∈ [0 , 1] is an embedding parameter and u0 is the first approximation that satisfies the boundary condition. One may assume that solution of Eq. (4.4) may be written as a power series in p, as the following:

The homotopy parameter p is also used to expand the square of the unknown angular frequency u as follows:

Or

Where ω0 is the coefficient of u(r) in Eq. (4.1) and should be substituted by the right hand side of Eq. (4.8). Besides, ωi (i = 1,2,...) are arbitrary parameters that have to be determined.

The best approximations for the solution and the angular frequency ω are

When Eq. (4.4) corresponds to Eq. (4.1) and Eq. (4.9) becomes the approximate solution of Eq. (4.1)

4.2 Application of Homotopy Perturbation Method

Example 1.

We consider the mathematical pendulum. When friction is neglected; the differential equation governing the free oscillation of the mathematical pendulum is given by [82];

When θ designates the deviation angle from the vertical equilibrium position, Ω2 = where g is the gravitational acceleration, l the length of the pendulum [82].

In order to apply the homotopy perturbation method to solve the above problem, the approximation sinθ ≈ θ - (1/6)θ3 + (1/120)θ5 is used

Now we apply homotopy perturbation to Eq. (4.11). We construct a homotopy in the following form:

According to HPM, we assume that the solution of Eq. (4.12) can be expressed in a series of p;

Just the coefficient of θ,(Ω2) expanded into a series in p in a similar way:

Substituting Eq. (4.13) and Eq. (4.14) into Eq. (4.12) after some simplification and substitution and rearranging based on powers of p-terms, we have:

Considering the initial conditions θ0(0) = A and 0(0) = 0 the solution of Eq. (4.15) is θ0 = A cos ωt Substituting the result into Eq. (4.16), we have:

For achieving the secular term, we use Fourier expansion series as follows:

Substituting Eq. (4.18) into right hand of Eq. (4.17) yields:

Avoiding secular term, gives:

From Eq. (4.14) and setting p = 1, we have:

Comparing Eqs. (4.20) and (4.21), we can obtain:

The exact frequency of this problem is:

Example 2

The motion of a particle on a rotating parabola is considered for second example. The governing equation of motion and can be expressed as;

Now we apply homotopy-perturbation to Eq. (4.24). We construct a homotopy in the following form:

According to HPM, we assume that the solution of (4.25) can be expressed in a series of p

The coefficient α1 expanded into a series in p in a similar way.

Substituting (4.26) and (4.27) into (4.25) after some simplification and substitution and rearranging based on powers of p-terms, we have:

And,

Considering the initial conditions u0(0) = A and 0(0) = 0 the solution of Eq. (4.28) is u0 = A cos (ωt) Substituting the result into Eq. (4.29), we have:

No secular term in p1 requires that

Substituting (4.31) in to Eq (4.27) and setting p = 1, we can obtain the frequency of the nonlinear oscillator as follows:

Table 4.2 shows the high accuracy of the Homotopy Perturbation Method with the Runge-Kutta Method.

Example 3

In this section, we will consider the system with linear and nonlinear springs in series as it is shown in Fig. 4.2.


In this figure, k1 is the stiffness coefficient of the first linear spring , the coefficients associated with the linear and nonlinear portions of spring force in the second spring with cubic nonlinear characteristic are described by k2 and k3 , respectively. Let ε be defined as:

The case of k3 > 0 corresponds to a hardening spring while k3 < 0 indicates a softening one.

Let x and y denote the absolute displacements of the connection point of two springs, and the mass m, respectively. By introducing two new variables

Telli and Kopmaz [185] obtained the following governing equation for υ and r:

Where a prime denotes differentiation with respect to time and

Eq. (4.35) is an ordinary differential equation in u. For Eq. (4.35), we consider the following initial conditions:

Eq. (4.35) can be rewritten as the following form:

Substituting Eqs. (4.6) and (4.7) into Eq. (4.39) and expanding, we can write the first two linear equations as follows:

Solving Eq. (4.40) gives: u0 = A cos ωt. Substituting u0 into Eq. (4.41), yield:

For achieving the secular term, we use Fourier expansion series as follows:

Substituting Eq. (4.43) into Eq. (4.42) yields:

Avoiding secular term, gives:

From Eq. (4.7) and setting p = 1, we have:

Comparing Eqs. (4.45) and (4.46), we can obtain:

Solving Eq. (4.47), gives:

Table 4.3 represents the comparisons of angular frequencies for different parameters via numerical is presented in Table 1. The maximum relative error between the HPM results and numerical results is 0.72170 %.

5 ITERATION PERTURBATION METHOD (IPM)

The study of nonlinear oscillators is of interest to many researchers and various methods of solution have been proposed. The iteration perturbation method (IPM) is considered to be one of the powerful methods which is capable for nonlinear problems, it can converge to an accurate solution for smooth nonlinear systems. The iteration perturbation method was first proposed by He [87] in 2001 and used to give approximate solutions of the problems of nonlinear oscillators. The application of this method is used in [26, 61, 149].

5.1 Basic idea of Iteration Perturbation Method

Many researchers have devoted their attention to obtaining approximate solution of nonlinear equations in the form:

Subject to the following initial conditions:

We rewrite Eq. (5.1) in the following form:

Where g(u,) = f/u.

We construct an iteration formula for the above equation:

Where we denote by un the n th approximate solution. For nonlinear oscillation, Eq. (5.4) is of Mathieu type. We will use the perturbation method to find approximately un+1 the technique is called iteration perturbation method.

In order to assess the advantages and the accuracy of the iteration perturbation method we will consider the following examples.

Here, we will introduce a nonlinear oscillator with discontinuity in several different forms:

Or

With initial conditions

In this work, we assume that h(u) is in a polynomial form. The reason for this assumption is that the discontinuity equations found in the literature belong to this family. Since there are no small parameters in Eq. (5.6) the traditional perturbation methods cannot be applied directly. In the following example, we assume a linear form h(u).

5.2 Application of Iteration Perturbation Method

Example 1

We let h(u) = αu, in Eq. (5.6).

We can rewrite Eq. (5.6) in the following form;

To apply the Iteration Perturbation Method, the solution is expanded and the series of ε is introduced as follows:

Substituting Eqs. (5.9), (5.10) and (5.11) into Eq. (5.8) and equating the terms with the identical powers of ε, a series of linear equations are obtained. Expanding the first two linear terms becomes as follows;

Substituting the solution into Eq. (5.12), e.g. u0 = A cos(ωt), the deferential equation for u1 becomes;

Note that the following Fourier series expansion is valid.

Where ci can be determined by Fourier series, for example,

Eq. (5.16) in Eq. (5.14) gives

Avoiding the presence of a secular term requires that

Also, substituting ε = 1,into Eqs. (5.9) and (5.10) gives:

From Eqs. (5.18), (5.19) and (5.20), the first-order approximation to the angular frequency is:

Case 1:

If α = 1,we have

It is the same as that obtained by the Homotopy perturbation method and the Variational method [95, 182].

Case 2:

If α = 0,we have

The obtained frequency in Eq. (5.23) is valid for the whole solution domain 0 < A < ∞.

Example 2

If h(u) = αu3, in Eq. (5.6).

Then we have

To apply the Iteration Perturbation Method, the solution is expanded and the series of ε is introduced as follows:

Substituting Eqs. (5.25), (5.26) and (5.27) into Eq. (5.24) and equating the terms with the identical powers of ε, a series of linear equations are obtained. Expanding the first two linear terms becomes as follows;

Substituting the solution into Eq. (5.28), e.g. u0 = A cos(ωt), the deferential equation for u1 becomes;

We have the following identity;

Note that the following Fourier series expansion is valid.

ci can be determined by Fourier series, for example :

By means of Eqs. (5.31), (5.32) and (5.33) we find that

No secular term in u1 requires that

Also, substituting ε = 1,into Eqs. (5.26) and (5.27) gives:

From Eqs. (5.35), (5.36) and (5.37), the first-order approximation to the angular frequency is:

Case 1:

If α = β,β = ε we have

This agrees well with that obtained by the Homotopy perturbation method and the Variational method [95, 182].

And its period is given by

Case 2 :

If ε = 0, its period can be written as;

The exact period was obtained by Acton and Squire in 1985 [2].

The maximal relative error is less than 2.2% for allβ > 0!

6 ENERGY BALANCE METHOD (EBM)

Nonlinear oscillator models have been widely used in many areas of physics and engineering and are of significant importance in mechanical and structural dynamics for the comprehensive understanding and accurate prediction of motion. This method was proposed by He [90] in 2002. This method can be seen as a Ritz method and leads to a very rapid convergence of the solution, and can be easily extended to other nonlinear oscillations. In short, this method yields extended scope of applicability, simplicity, flexibility in application, and avoidance of complicated numerical and analytical integration as compared to others among the previous approaches, such as, the perturbation methods, and so could widely applicable in engineering and science.Energy balance method used heavily in the literature in [17, 19, 22, 25, 55, 56, 58, 60, 65–67, 116, 120, 141, 150, 178, 209] and the references therein.

6.1 Basic idea of Energy Balance Method

In the present paper, we consider a general nonlinear oscillator in the form [90]:

In which u and t are generalized dimensionless displacement and time variables, respectively. Its variational principle can be easily obtained:

Where T = is period of the nonlinear oscillator, F(u) = ∫f(u)du.

Its Hamiltonian, therefore, can be written in the form;

Or

Oscillatory systems contain two important physical parameters, i.e. ω is the frequency and A is the amplitude of the oscillation. So let us consider such initial conditions:

We use the following trial function to determine the angular frequency ω

Substituting (6.6) into u term of (6.4), yield:

If, by chance, the exact solution had been chosen as the trial function, then it would be possible to make R zero for all values of t by appropriate choice of ω. Since Eq. (6.6) is only an approximation to the exact solution, R cannot be made zero everywhere. Collocation at ωt = gives:

Its period can be written in the form:

6.2 Application of Energy Balance Method

Example 1

In this section, we will consider the system with linear and nonlinear springs in series.

In Eq. (4.35), Its Variational principle can be easily obtained:

Its Hamiltonian, therefore, can be written in the form:

or

Oscillatory systems contain two important physical parameters, i.e. the frequency ω and the amplitude of oscillation, A. So let us consider such initial conditions:

Assume that its initial approximate guess can be expressed as:

Substituting Eq. (6.14) into Eq. (6.12), yields:

Which trigger the following result:

If we collocate at ωt = , we obtain:

Its period can be written in the form:

To further illustrate and verify the accuracy of this approximate analytical approach, comparison of the time history oscillatory displacement responses for the system with linear and nonlinear springs in series with numerical solutions are depicted in Figures 6.1 and 6.2. Figures 6.1 and 6.2 represent the displacements of u(t) for a mass with different initial conditions and spring stiffnesses.



Example 2

From Hamden [79], it is known that the free vibrations of an autonomous conservative oscillator with inertia and static type fifth-order non-linearties is expressed by

With the initial conditions:

Motion is assumed to start from the position of maximum displacement with zero initial velocity. λ is an integer which may take values of λ = 1,0 or -1, and ε123 and ε4 are positive parameters.

The solution of nonlinear equation with the Energy Balance method is:

in which x and t are generalized dimensionless displacement and time variables, respectively.

Its Variational principle can be easily obtained:

in which x and tare generalized dimensionless displacement and time variables, respectively.

Its Variational principle can be easily obtained:

Its Hamiltonian, therefore, can be written in the form:

Or

Oscillatory systems contain two important physical parameters, i.e. the frequency ω and the amplitude x(t) = A cosωt of oscillation, A. So let us consider such initial conditions:

Assume that its initial approximate guess can be expressed as:

Substituting Eq. (6.27) into Eq. (6.25) yields:

Which trigger the following results

If we collocate at ωt = , we obtain:

Substituting Eq. (6.30) into Eq. (6.27) yields:

The numerical solution with Runge-Kutta method for nonlinear equation is:

And

Motion is assumed to start from the position of maximum displacement with zero initial velocity. λ Is an integer which may take values of λ = 1,0 or -1, and ε123 and ε4 are positive parameters. The values of parameters ε123 and ε4 associated for a mode is shown in Table 6.1.

It can be seen from Figures 6.3-6.4 EBM results have a good agreement with the numerical solution for 3 modes. Figures show the motion of the system is a periodic motion and the amplitude of vibration is a function of the initial conditions.




Example 3

Consider a straight Euler-Bernoulli beam of length L, a cross-sectional area A, the mass per unit length of the beam m, a moment of inertia I, and a modulus of elasticity E that is subjected to an axial force of magnitude P as shown in Fig.6.6. The equation of motion including the effects of mid-plane stretching is given by:

Figure 6.5



For convenience, the following non-dimensional variables are used:

Where ρ = (I/A)1/2 is the radius of gyration of the cross-section. As a result Eq. (6.34) can be written as follows:

Assuming w(x,t) = V(t) ϕ (x) where ϕ(x) is the first eigenmode of the beam [189] and applying the Galerkin method, the equation of motion is obtained as follows:

The Eq. (6.37) is the differential equation of motion governing the non-linear vibration of Euler-Bernoulli beams. The center of the beam is subjected to the following initial conditions:

Where Δ denotes the non-dimensional maximum amplitude of oscillation and α12 and α3 are as follows:

Variational formulation of Eq. (6.37) can be readily obtained as follows:

Its Hamiltonian, therefore, can be written in the form:

And

We will use the trial function to determine the angular frequency ω, i.e.

If we substitute Eq. (6.46) into Eq. (6.45), it results the following residual equation

If we collocate at ωt = we obtain:

The non-linear natural frequency and the deflection of the beam center become as follows:

According to Eq. (6.49) and Eq. (6.46), we can obtain the following approximate solution:

Non-linear to linear frequency ratio is:

Table 6.2

To show the accuracy of Energy Balance Method (EBM) , comparisons of the time history oscillatory displacement response for Euler-Bernoulli beams with exact solutions are presented in Figs. 6.7 and 6.8.



It can be observed that the results of EBM require smaller computational effort and only a first-order approximation leads to accurate solutions. The Influence of α3 on nonlinear to linear frequency and α1 are presented in figures 6.9 and 6.10. It has illustrated that Energy Balance Method is a very simple method and quickly convergent and valid for a wide range of vibration amplitudes and initial conditions. The accuracy of the results shows that the Energy Balance Method can be potentiality used for the analysis of strongly nonlinear oscillation problems accurately.



7 PARAMETER – EXPANSION METHOD (PEM)

Various perturbation methods have been applied frequently to analyze nonlinear vibration equations. These methods are characterized by expansions of the dependent variables in power series in a small parameter, resulting in a collection of linear deferential equations which can be solved successively. He proposed the parameter expanding method for the first time in his review article [100].The main property of the method is to use parameter-expansion technique to eliminate the secular terms and to achieve the frequency. PEM was successfully applied to various engineering problems [8, 42, 69, 97, 103, 118, 134, 147, 161, 190, 195–197, 201].

7.1 Basic idea of Parameter-Expansion Method

In order to use the PEM, we rewrite the general form of Duffing equation in the following form [100]:

Where N(u,t) includes the nonlinear term. Expanding the solution u,ε as a coefficient of u,and 1 as a coefficient of N(u,t), the series of p can be introduced as follows:

Substituting (7.2)-(7.4) into (7.1) and equating the terms with the identical powers of p, we have

Considering the initial conditions u0(0) = A and 0(0) = 0, the solution of (7.5) is u0 = A cos(ωt). Substituting u0 into (7.6), we obtain

For achieving the secular term, we use Fourier expansion series as follows:

Substituting (7.8) into (7.7) yields;

For avoiding secular term, we have

Setting p = 1 in (7.3) and (7.4), we have:

Substituting (7.11) and (7.12) into (7.10), we will achieve the first-order approximation frequency (7.1). Note that, from (7.40 and (7.12), we can find that ai = 0 for all i = 1,2,3,4,...

7.2 Application of Parameter -Expansion Method

Example 1

To illustrate the basic solution procedure, we consider the following nonlinear oscillator:

We rewrite it in this form

Assume that the solution can be expressed as a power series in an artificial Parameter to p

Where p is a bookkeeping parameter.

We assume that the coefficients α and 1 on the left side of Eq. (7.14) can be respectively expanded into a series in p:

Substituting Eqs. (7.16) and (7.17) into Eq. (7.140 and equating the terms with the identical powers p, we have:

Solving Eq. (7.18), we have:

Substituting the result into Eq. (7.19), we have:

We have the following identity

And

No secular terms in u1 requires

If the first-order approximation is sufficient, then we set p = 1 and from (7.16) and (7.17) we have:

From Eqs. (7.24), (7.25), (7.26) we obtain;

If we assume α = , β = µ, we have:

The same result was obtained in [162].

Example 2

Consider the following nonlinear oscillator [46, 132]:

We rewrite it in the form

Assume that the solution can be expressed as a power series in an artificial parameter p:

Where p is a bookkeeping parameter. We assume that the coefficients 0 and 1 on the left side of Eq. (7.31) can be respectively expanded into a series in p

Substituting Eqs. (7.32), (7.33) and (7.34) into Eq. (7.30) and equating the terms with the identical powers of p, we have

The solution of Eq. (7.35) can be easily obtained

Substituting the result into Eq. (7.36), we have:

Using Fourier series expansion, we have

No secular terms in u1 requires

If the first-order approximation is sufficient, then we set p = 1 and from (7.32) and (7.33) we have

From Eqs. (7.39), (7.40), (7.41) and (7.42), we have:

Which agrees well with the exact solution The obtained frequency is valid for all 0 < A < ∞.

8 VARIATIONAL APPROACH (VA)

The study of nonlinear oscillators is an interest for many researchers, because there are many practical engineering components consisting of vibrating systems that can be modeled using oscillatory systems. Nonlinear analytical techniques for solving nonlinear problems have been dominated by different methods of investigation of these problems which appeared in numerous domains of physics and engineering. Overview of the literary texts with multiple mentions has been given by many wordsmiths utilizing miscellaneous analytical methods for solving nonlinear oscillation systems. Various variational methods have made, and will continue to make, an impact in key areas for science and technology development. The method was proposed by He in 2007 [107]. He suggested a new variational method which is very effective for nonlinear oscillators. The application of this method widely used in many scientific papers [7, 16, 18, 21, 71, 119, 121, 135, 143, 151, 152, 154, 169, 175, 212].

8.1 Basic idea of Variational Approach

He suggested a variational approach which is different from the known variational methods in open literature [107]. Hereby we give a brief introduction of the method:

Its variational principle can be easily established utilizing the semi-inverse method:

Where T is period of the nonlinear oscillator, F/u = f. Assume that its solution can be expressed as

Where A and ω are the amplitude and frequency of the oscillator, respectively. Substituting Eq. (8.3) into Eq. (8.2) results in:

Applying the Ritz method, we require:

But with a careful inspection, for most cases we find that

Thus, we modify conditions Eq. (8.5) and Eq. (8.6) into a simpler form:

From which the relationship between the amplitude and frequency of the oscillator can be obtained.

8.2 Application of Variational Approach

Example 1

We consider the physical model of nonlinear equation in the following figure with F(t) = F0 sin ω0t, indicated in Fig.8.1.


The motion equation is:

This equation is as known as Mathieu equation or the system with dependent coefficients to time. In which θ and t are generalized dimensionless displacements and time variables, respectively. And consider F = as constant.

The approximation sin(θ) = θ - (1/6)θ3 + (1/120)θ5 is used.

Its variational formulation can be readily obtained Eq. (8.9) as follows:

Choosing the trial function θ(t) = A cos(ωt) into Eq. (8.10) we obtain:

The stationary condition with respect to A leads to:

Or

Solving Eq. (8.13), according to ω, we have:

Then we have:

According to Eqs. (8.3) and (8.15), we can obtain the following approximate solution:

We compared the numerical solution and variational approach method for different parameters:

Figure 8.2 represents a comparison of analytical solution of θ(t) based on time with the numerical solution and figure 8.3 shows comparison of analytical solution of dθ/dt based on time with the numerical solution.



Example 2

In this example, we consider the following nonlinear oscillator [71]:

With the boundary conditions of:

In order to apply the variational approach method to solve the above problem, the approximation cosθ ≈ 1 - θ2 + θ4 is used.

Its variational formulation is:

Choosing the trial function θ(t) = A cos(ωt) into Eq. (8.19) we obtain

The stationary condition with respect to A reads:

Or

Then we have ;

Solving Eq. (8.23), according to ω, we have:

Hence, the approximate solution can be readily obtained:

For comparison of the approximate solution, frequency obtained from solution of nonlinear equation with the Variational Approach is:

The numerical solution (with Runge-Kutta method of order 4) for nonlinear equation is:

We compared the numerical solution with the variational approach in Figs 8.4 and 8.5:



Figs. 8.4 shows the displacement of the system for l=2.5, r=0. 5, g=10, A=1.

Fig.8.5 represents the variation of frequency various parameters of amplitude (A).Comparing with the numerical results, it has been shown that the results of VA require smaller computational effort and only a first-order approximation of the VA leads to high accurate solutions.

Example 3

The mathematical pendulum is considered again as an example. The differential equation governing for the free oscillation of the mathematical pendulum is given by [138]

With the boundary conditions of:

In order to apply the variational approach method to solve the above problem, the approximation cos θ ≈ 1 - θ2 + θ4 and sin θ ≈ θ - θ3 is used.

Its variational formulation can be readily obtained as follows:

Choosing the trial function θ(t) = A cos(ωt) into Eq. (8.31) we obtain

The stationary condition with respect to A reads:

Or

Then we have;

Solving Eq. (8.34), according to ω, we have:

Hence, the approximate solution can be readily obtained:

To compare the results of VA, frequency obtained from VA is:

The numerical solution (with Runge-Kutta Method of order 4) for nonlinear equation is:

Some comparisons are presented to show the accuracy of the method. Figures 8.6 and 8.7 show comparison of analytical solution of θ and based on time with the numerical solution. The variation of amplitude A on the frequency of the system is shown in figure 8.8. It can be approved that VA is powerful in finding analytical solutions for a wide class of nonlinear problems.




9 IMPROVED AMPLITUDE-FREQUENCY FORMULATION (IAFF)

Most of engineering problems, especially some oscillation equations are nonlinear, and in most cases, it is difficult to solve such equations, especially analytically. One of the well-known methods to solve nonlinear problems is improved amplitude frequency formulation (IAFF). He in his previous review paper [100] in traduced the Ancient Chinese method including improved amplitude frequency formulation (IAFF). Geng and Cai [74] found the method to be very effective in solving strongly nonlinear oscillators. To illustrate the basic idea of the method, we consider an algebraic equation, this method applied correctly in many open literatures [1, 38, 52, 72, 106, 108, 109, 163–165, 182, 183, 200, 211, 214–216].

9.1 Basic idea of Improved Amplitude-Frequency Formulation

We consider a generalized nonlinear oscillator in the form [109]:

We use two following trial functions

And

The residuals are

And

The original Frequency-amplitude formulation reads :

He used the following formulation [100] and Geng and Cai improved the formulation by choosing another location point [74].

This is the improved form by Geng and Cai.

The point is: cos(ω1t) = cos(ω2t) = k

Substituting the obtained ω into u(t) = A cos(ωt) , we can obtain the constant k in ω2 equation in order to have the frequency without irrelevant parameter.

To improve its accuracy, we can use the following trial function when they are required.

or

But in most cases because of the sufficient accuracy, trial functions are as follow and just the first term:

And

Where a and c are unknown constants. In addition we can set:

cos t = k in u1 , and cos (ωt) = k in u2

9.2 Application of Improved Amplitude-Frequency Formulation

In this section, three practical examples are illustrated to show the applicability, accuracy and effectiveness of the proposed approach.

Example 1

A two-mass system connected with linear and nonlinear stiffnesses. Consider the two-mass system model as shown in Fig. (9.1). The equation of motion is given as [44];


With initial conditions

Where double dots in Eq. (9.13) denote double differentiation with respect to time t, k1 and k2 are linear and nonlinear coefficients of the spring stiffness, respectively. Dividing Eq. (9.13) by mass m yields

Introducing intermediate variables u and ν as follows [127]:

And transforming Eqs. (9.16) and (9.17) yields

Where α = k1/m and α = k2/m Eq. (9.18) is rearranged as follows:

Substituting Eq. (6.20) into Eq. (9.19) yields

With initial conditions

We use trial functions, as follows:

And

Respectively, the residual equations are:

And

Considering cos t1 = cos 2 t2 = k, we have:

We can rewrite ν(t) = A cos(ωt) in the form:

In view of the approximate solution, we can rewrite the main equation in the form:

If by any chance ν(t) = A cos is the exact solution, then the right side of Eq. (9.29) vanishes completely. Considering our approach which is just an approximation one, we set:

Considering the term ν(t) = A cos and substituting the term to Eq. (9.30) and solving the integral term, we have:

So, substituting Eq. (9.31) into Eq. (9.27), we have:

The first-order approximate solutions is of a high accuracy and the percentage error improves significantly from lower order to higher order analytical approximations for different parameters and initial amplitudes. Hence, it is concluded that excellent agreement with the exact so. Tables 9.1 gives the comparison of obtained results with the exact solutions for different m, k1, k2 , and initial conditions. The maximum relative error between the IAFF results and exact results is 3.140178%.A comparison of the time history oscillatory displacementresponse for the two masses with exact solutionsare presented in Figs. (9.2) to (9.5).






Example 2

Consider a two-mass system connected with linear and nonlinear springs and fixed to a body at two ends as shown in Fig. (9.6) [43].


With initial conditions

Where double dots in Eq. (9.33) denote double differentiation with respect to time , k1 and k2 are linear and nonlinear coefficients of the spring stiffness and k3 is the nonlinear coefficient of the spring stiffness. Dividing Eq. (9.33) by mass m yields

Like in Example 1, transforming the above equations using intermediate variables in Eqs. (9.16) and (9.17) yields;

Where α = k1/m ,β = k2/m and ξ = k3/m . Eq. (9.36) is rearranged as follows:

Substituting Eq. (9.38) into Eq. (9.37) yields

With initial conditions

We use trial functions, as follows:

And

Respectively, the residual equations are:

And

Considering cos t1 = cos 2t2 = k, we have:

We can rewrite ν(t) = A cos(ωt) in the form:

In view of the approximate solution, we can rewrite the main equation in the form:

If by any chance Eq. (9.46) is the exact solution, then the right side of Eq. (9.47) vanishes completely. Considering our approach which is just an approximation one, we set:

Considering the term ν(t) = A cos and substituting the term to Eq. (9.48) and solving the integral term, we have:

So, substituting Eq. (9.49) into Eq. (9.45), we have:

Table 9.2 shows an excellent agreement of the IAFF and exact solutions. From the Figs. 9.7 to 9.10, motions of the systems are periodic motions and the amplitude of vibrations is function of the initial conditions. These expressions are valid for a wide range of vibration amplitudes and initial conditions. The proposed methods are quickly convergent and can also be readily generalized to two-degree-of-freedom oscillation systems with quadratic nonlinearity by combining the transformation technique.






Example 3

In order to assess the advantages and the accuracy of Improved Amplitude-frequency Formulation for solving nonlinear oscillator, we will consider the following nonlinear oscillator;

with the initial conditions of:

We use trial functions, as follows:

And

Respectively, the residual equations are:

And

Considering cos t = cos2t = k, we have:

We can rewrite u(t) = A cos(ωt) in the form:

In view of the approximate solution, we can rewrite the main equation in the form:

If by any chance u(t) = A cos is the exact solution, then the right side of Eq. (9.59) vanishes completely. Considering our approach which is just an approximation one, we set:

Considering the term u(t) = A cos(ωt) and substituting the term to Eq. (9.61) and solving the integral term, we have:

So, substituting Eq. (9.61) into Eq. (9.57), we have:

We can obtain the following approximate solution:

Figs. 9.11 and 9.12 represent a comparison of the analytical solution of u(t) based on time with the numerical solution. The time history diagram of u(t) starts without an observable deviation with A = 0.5 and A = 2. The behavior of the system is a periodic motion and the amplitude of vibration is a function of the initial conditions. The best accuracy can be seen at extreme points. Although deviations of solutions are expected to increase as time progresses, the analytical solutions have adequate accuracy for the period shown



10 MAX-MIN APPROACH (MMA)

In this section, we consider a novel method called Max-Min Approach (MMA). Maximal and minimal solution thresholds of a nonlinear problem can be easily found, and an approximate solution of the nonlinear equation can be easily deduced using He Chengtian's interpolation, which has millennia history. Some examples are illustrated to show the efficiency and accuracy of the proposed method for high nonlinear vibration problems. This methodology has been utilized to achieve approximate solutions for nonlinear free vibration of conservative thick circular sector slabs. In Max-Min Approach (MMA), contrary to the conventional methods, only one iteration leads to high accuracy of solutions. Max-Min Approach (MMA) operates very well in the whole range of the parameters involved. Excellent agreement of the approximate frequencies and periodic solutions with the exact ones could be established. Some patterns are given to illustrate the effectiveness and convenience of the methodology. It has been indicated that the numerical results have same conclusion; while MMA is much easier, more convenient and more efficient than other approaches. The MMA is a novel method which alleviates drawbacks of the traditional numerical techniques. The method first was proposed by He [110]. The application of this method widely used in many scientific papers [13, 20, 23, 70, 73, 171, 188, 207].

10.1 Basic idea of Max-Min Approach

We consider a generalized nonlinear oscillator in the form

Where f(u) is a non-negative function of u. According to the idea of the max-min method, we choose a trial-function in the form

Where ω the unknown frequency to be further is determined.

Observe that the square of frequency, ω2, is never less than that in the solution

of the following linear oscillator

Where fmin is the minimum value of the function f(u).

In addition, ω2 never exceeds the square of frequency of the solution

of the following oscillator

Where fmax is the maximum value of the function f(u).

Hence, it follows that

According to He Chentian interpolation [110, 112], we obtain

Or

Where m and n are weighting factors, k = n/m. So the solution of Eq. (10.1) can be expressed as

The value of k can be approximately determined by various approximate methods [105, 110, 112]. Among others, hereby we use the residual method [110]. Substituting (10.10) into (10.1) results in the following residual:

Where ω =

If, by chance, Eq. (10.10) is the exact solution, then R(t;k) is vanishing completely. Since our approach is only an approximation to the exact solution, we set

where T = 2π/ω . Solving the above equation, we can easily obtain

Substituting the above equation into Eq. (10.10), we obtain the approximate solution of Eq. (10.1).

10.2 Application of Max-Min Approach

In this section, three examples are illustrated and solved to show the applicability, accuracy and effectiveness of Max-Min Approach.

Example 1

We can re-write Eq. (9.21) from the previous section in the following form;

We choose a trial-function in the form

Where ω the frequency to be is determined the maximum and minimum values of 2α + 2βν2 will be 2α + 2βA2 and 2α respectively, so we can write:

According to He Chengtian's inequality , we have

Where m and n are weighting factors, k = n/m + n. Therefore the frequency can be approximated as:

Its approximate solution reads

In view of the approximate solution, Eq. (10.19) we re-write Eq. (10.14) in the form

If by any chance Eq. (10.19) is the exact solution, then the right side of Eq. (10.20) vanishes completely. Considering our approach which is just an approximation one, we set:

Where T = 2π/ω . Solving the above equation, we can easily obtain

Finally the frequency is obtained as

According to Eqs. (10.15) and (10.23), we can obtain the following approximate solution:

The first-order analytical approximation for u(t) is

Therefore, the first-order analytical approximate displacements x(t) and y(t) are

From table.10.1, the relative error of the MMA is 2.2065% for the first-order analytical approximations, for different values of m, k1, k2, X0 and Y0. The first-order approximate solution gives an excellent agreement with the exact one.To further illustrate and verify the accuracy of this approximate analytical approach, a comparison of the time history oscillatory displacement and velocity responses for the two masses with exact solutions is depicted in Fig. 10-1 and 10.2. Figs. 10.3 and 10.4 represent the effects of amplitude on the phase plan of the system. It is apparent that the first-order analytical approximations show excellent agreement with the exact solution using the Jacobi elliptic function.





Example 2

A two-mass system connected with linear and nonlinear stiffnesses fixed to the body was solved by IAFF is considered again in this section. We can re-write Eq. (9.39) in the following form;

We choose a trial-function in the form

Where ω the frequency to be is determined the maximum and minimum values of α + 2β + 2ξν2 will be α + 2β + 2ξA2 and α + 2β respectively, so we can write:

According to He Chengtian's inequality , we have

Where m and n are weighting factors, k = n/m+n. Therefore the frequency can be approximated as:

Its approximate solution reads

In view of the approximate solution, Eq. (10.31) we re-write Eq. (10.27) in the form;

If by any chance Eq. (10.32) is the exact solution, then the right side of Eq. (10.33) vanishes completely. Considering our approach which is just an approximation one, we set:

Where T = 2π/ω. Solving the above equation, we can easily obtain

Finally the frequency is obtained as

According to Eqs. (10.36) and (10.28), we can obtain the following approximate solution:

The first-order analytical approximation for u(t) is

Therefore, the first-order analytical approximate displacements x(t) and y(t) are

Table 10.2 gives the comparison of obtained results with exact ones are tabulated in Table 10.2 for different value of m, k1, k2, k3 and initial conditions. Comparisons of results for different parameters via numerical and MMA are presented in Figures 10.5 to 10.8. From figures 10.5 and 10.6, it is obvious that the motion of the system is periodic. Figures 10.7 and 10.8 represent comparison of analytical solution of dx/dt and dy/dt based on time with the numerical solution for different parameters of the system.





Example 3

We consider geometrically non-linear Tapered beams. In dimensionless form, Goorman is given the governing differential equation corresponding to fundamental vibration mode of a tapered beam [78]:

Where u is displacement and ε1 and ε2 are arbitrary constants. Subject to the following initial conditions:

We can re-write Eq. (10.40) in the following form

We choose a trial-function in the form

Where ω the frequency to be is determined.

By using the trial-function, the maximum and minimum values of ω2 will be:

So we can write:

According to the Chengtian's inequality , we have

Where m and n are weighting factors, k = n/m+n. Therefore the frequency can be approximated as:

Its approximate solution reads

In view of the approximate solution, Eq. (10.42), we re-write Eq. (10.42) in the form

Substituting the trial function into Eq. (10.50), and using Fourier expansion series, it is obvious that:

For avoiding secular term we set b1= 0

Where T = 2π/ω. Solving the above equation, we can easily obtain

Substituting Eq. (10.53) into Eq. (10.47), yields

According to Eqs. (10.54) and (10.43), we can obtain the following approximate solution:

The exact frequency ωe for a dynamic system governed by Eq. (10.40) can be derived, as shown in Eq. (10.56), as follows:

To demonstrate the accuracy of the MMA, the procedures explained in previous sections are applied to obtain natural frequency and corresponding displacement of tapered beams. A comparison of obtained results from the Max-Min Approach and the exact one is tabulated in table 10.3 for different parameters A, ε1 and ε2.

Figs. 10.9 and 10.10 represent the high accuracy of the MMA with the exact one for ε1 = 0.1 ε2 = 0.5 and ε1 = 0.5 ε2 = 0.1 . The effect of small parameters ε2 and ε1 on the frequency corresponding to various parameters of amplitude (A) has been studied in Figs. 10.11 and 10.12. It is evident that MMA shows excellent agreement with the numerical solution using the exact solution and quickly convergent and valid for a wide range of vibration amplitudes and initial conditions.





11 HAMILTONIAN APPROACH (HA)

Investigate of nonlinear problems which are arisen in many areas of physics and engineering, especially some oscillation equations are nonlinear, and in most cases it is difficult to solve such equations, especially analytically. Previously, He had introduced the Energy Balance method based on collocation and the Hamiltonian. This approach is very simple but strongly depends upon the chosen location point. Recently, He [111] has proposed the Hamiltonian approach to overcome the shortcomings of the energy balance method. This approach is a kind of energy method with a vast application in conservative oscillatory systems. Application of this method can be found in many literatures [124, 140, 198, 199, 203–205].

11.1 Basic idea of Hamiltonian Approach

In order to clarify this approach, consider the following general oscillator;

With initial conditions:

Oscillatory systems contain two important physical parameters, i.e. the frequency ω and the amplitude of oscillation A. It is easy to establish a variational principle for Eq. (11.1), which reads;

Where T is period of the nonlinear oscillator, F/u = f.

In the Eq (11.3),

2 is kinetic energy and F (u) potential energy, so the Eq (11.3) is the least Lagrangian action, from which we can immediately obtain its Hamiltonian, which reads ;

From Eq. (11.4), we have;

Introducing a new function, (u) , defined as;

Eq. (11.5) is, then, equivalent to the following one;

or

From Eq. (11.8) we can obtain approximate frequency-amplitude relationship of a nonlinear oscillator.

11.2 Application of Hamiltonian Approach

We have considered three examples in this section to show the application of the proposed method.

Example 1

To illustrate the basic procedure of the present method, we consider an u1/3 force nonlinear oscillator:

The Hamiltonian of Eq. (11.9) is constructed as:

Integrating Eq. (11.10) with respect to t from 0 to T/4, we have;

Assume that the solution can be expressed as:

Substituting Eq. (11.12) into Eq. (11.11), we obtain:

Setting:

Solving the above equation, an approximate frequency as a function of amplitude equals;

Hence, the approximate solution can be readily obtained;

The same result was obtained by He [107].

Example 2

Considering the governing equation of motion for the Duffing-harmonic oscillator:

The Hamiltonian of Eq. (11.17) is constructed as:

Integrating Eq. (11.18) with respect to t from 0 to T/4, we have;

Assume that the solution can be expressed as:

Substituting Eq. (11.20) into Eq. (11.19), we obtain:

Setting:

Solving the above equation, an approximate frequency as a function of amplitude equals;

The exact frequency is given by [132]:

Example 3

The Hamiltonian of Eq. (10.40) is constructed as;

Integrating Eq. (11.25) with respect to t from 0 to T/4, we have;

Assume that the solution can be expressed as;

Substituting Eq. (11.27) into Eq. (11.26), we obtain;

Setting:

Solving the above equation, an approximate frequency as a function of amplitude equals;

Hence, the approximate solution can be readily obtained;

Table 11.2

12 HOMOTOPY ANALYSIS METHOD (HAM)

Homotopy analysis is a general analytic method for solving the non-linear differential equations. The HAM transforms a non-linear problem into an infinite number of linear problems with embedding an auxiliary parameter (q) that typically ranges from zero to one. As q increases from 0 to 1, the solution varies from the initial guess to the exact solution. By suitable choice of the auxiliary parameter (q), we can obtain reasonable solutions for large modulus. This method is a strong and easy-to-use analytic tool for investigating nonlinear problems, which does not need small parameters. In 1992, Liao employed the basic ideas of homotopy in topology to propose a general analytic method for nonlinear problems, namely homotopy analysis method (HAM) [128]. This method has been successfully applied to solve many types of nonlinear problems by others [4, 6, 40, 41, 49, 51, 53, 114, 126, 129–131, 155–159, 172, 193, 194, 213]. The basic idea of HAM is introduced and then its application in nonlinear vibration is studied.

12.1 Basic idea of Homotopy Analysis Method

To illustrate the basic ideas of the HAM, consider the following non-linear differential equation:

Where N is a nonlinear operator, t denotes the independent variable and u(t) is an unknown variable. The homotopy function is constructed as follows:

where ϕ , ħ and H(t) are a function of t and q, the non-zero auxiliary parameter, is a non-zero auxiliary function, respectively. The parameter L denotes an auxiliary linear operator. As q increases from 0 to 1, the ϕ(t;q) varies from the initial approximation to the exact solution. In the other words, ϕ(t;0) = u0(t) is the solution of the (ϕ,q,ħ ,H(t))|q = 0 = 0 and ϕ(t;1) = u0(t) is the solution of the (ϕ,q,ħ ,H(t))|q = 1 = 0. Enforcing (ϕ,q,ħ ,H(t)) = 0 , the zero-order deformation is constructed as:

with the following initial conditions:

The functions ϕ(t,q) and ω(q) can be expanded as power series of q using Taylor's theorem as;

Where um(t) and ωm are called the m-order deformation derivations.

Differentiating zero-order deformation equation with respect to q and the setting q = 0, yields the first order deformation equation (m = 1) which gives the first-order approximation of the u(t) as follows:

with the following initial conditions:

The higher order approximations of the solution can be obtained by calculating the m-order (m > 1) deformation equation. The m-order deformation equation can be calculated by differentiating Eqs. (12.5) and (12.6) m times with respect to q as follows:

Where the

m-1, m-1 and Rm(m-1, m-1) are defined as follows:

Subject to the following initial conditions:

12.2 Application of Homotopy Analysis Method

Example 1

Consider the following Duffing equation ;

Under the transformation τ = ωt and W(τ) = u(t) Eq. (12.14) becomes as follows:

The zero-order deformation equation can be written as below:

In which;

We chose the following auxiliary linear operator as:

We employ Taylor expansion series for ϕ(t;q) and ω(q) as

In order to satisfy the initial conditions, the initial guess of W(τ) is chosen as follows:

In our case, to obtain the first-order approximation, the function of W1(τ) can be expressed as

Assuming ħ1 = -1, h(t) = 1 and after substituting Eq. (12.21) in Eq. (12.22), one would get:

Eliminating the secular term, we have:

The same result was obtained in the first example of section 2.

Solving Eqs. (12.24) and (12.25), the W1(τ) is obtained as follows:

Thus the first-order approximation of the W(τ) yields to:

In which:

13 CONCLUSIONS

It has reviewed new asymptotic methodologies throughout numerous examples. The analytical solutions yield a thoughtful and insightful understanding of the effect of system parameters and initial conditions. Also, Analytical solutions give a reference frame for the verification and validation of other numerical approaches.

Variational Iteration Method (VIM),Homotopy Perturbation Method (HPM), Energy Balance Method (EBM),Parameter-Expansion Method (PEM) ,Variational Approach (VA),Improved Amplitude Frequency Formulation (IAFF),Max-Min Approach (MMA),Hamiltonian Approach (HA) and Homotopy Analysis Method (HAM) are suitable not only for weak nonlinear problems, but also for strong nonlinear problems as it is indicated in this review. The most significant feature of those methods is their excellent accuracy for the whole range of oscillation amplitude values. Also, it can be used to solve other conservative truly nonlinear oscillators with complex nonlinearities. The solutions are quickly convergent and its components can be simply calculated. Also, compared to other analytical methods, it can be observed that the results of those methods require smaller computational effort and only the one iteration leads to accurate solutions. The successful implementations of the mentioned methods for the large amplitude nonlinear oscillation problem were considered in this review. All reviewed methods can be applied to various kinds of weak and strong nonlinear problems, and the examples studied in this review can be utilized as paradigms for oscillator problems. Through nonlinear oscillators, all the reviewed methods yield high accurate approximate periods which indicated above.

Received 02 Feb 2011;

In revised form 22 May 2012

  • [1] G. Abdollahzade, M. Bayat, and M. Shahidi. Application of two analytic approximate solutions to an oscillation of a mass attached to a stretched elastic wire. Journal of Advanced Research in Mechanical Engineering, 1:162169, 2010.
  • [2] J. Acton and P. Squire. Solving Equations with Physical Understanding Adam Hilger Ltd., Bristol, Boston, 1985.
  • [3] V. Agrwal and H. Denman. Weighted linearization technique for period approximation in large amplitude non-linear oscillations. Journal of Sound and Vibration, 99(4):463473, 1985.
  • [4] M. Ahmadian, M. Mojahedi, and H. Moeenfard. Free vibration analysis of a nonlinear beam using homotopy and modified lindstedt-poincare methods. Journal of Solid Mechanics, 1(1):2936, 2009.
  • [5] M. Akbarzade, J. Langari, and D. Ganji. A coupled homotopy-variational method and variational formulation applied to nonlinear oscillators with and without discontinuities. Journal of Vibration and Acoustics, (133):44501, 2011.
  • [6] A. Alomari, M. Noorani, and R. Nazar. On the homotopy analysis method for the exact solutions of helmholtz equation. Chaos, Solitons & Fractals, 41(4):18731879, 2009.
  • [7] A. Amani, D.D. Ganji, A.A. Jebelli, M. Shahabi, and N.S. Nosar. Application of he's variational approach method for periodic solution of strongly nonlinear oscillation problems. International Journal of Applied Mathematics and Computation, 2(3):3343, 2011.
  • [8] P. Amore and A. Aranda. Improved lindstedt-poincaré method for the solution of nonlinear problems. Journal of Sound and Vibration, 283(3-5):11151136, 2005.
  • [9] I. V. Andrianov, J. Awrejcewicz, and V. Chernetskyy. Analysis of natural in-plane vibration of rectangular plates using homotopy perturbation approach. Mathematical Problems in Engineering, (133), 2006.
  • [10] I. V. Andrianov, J. Awrejcewicz, and L.I. Manevich. Asymptotical mechanics of thin-walled structures Springer Verlag, 2004.
  • [11] A. Aziz and V. Lunardini. Perturbation techniques in phase change heat transfer. Applied Mechanics Reviews, 46:29, 1993.
  • [12] L. Azrar, R. Benamar, and R. White. Semi-analytical approach to the non-linear dynamic response problem of ss and cc beams at large vibration amplitudes part i: General theory and application to the single mode approach to free and forced vibration analysis. Journal of Sound and Vibration, 224(2):183207, 1999.
  • [13] H. Babazadeh, G. Domairry, A. Barari, R. Azami, and A. Davodi. Numerical analysis of strongly nonlinear oscillation systems using he's max-min method. Frontiers of Mechanical Engineering, pages 17, 2011.
  • [14] M. Bayat and G. Abdollahzade. Analysis of the steel braced frames equipped with adas devices under the far field records. Latin American Journal of Solids and Structures, 8(4):163181, 2011.
  • [15] M. Bayat and G. R. Abdollahzadeh. On the effect of the near field records on the steel braced frames equipped with energy dissipating devices. Latin American Journal of Solids and Structures, 8(4):429443, 2011.
  • [16] M. Bayat, G.R. Abdollahzadeh, and M. Shahidi. Analytical solutions for free vibrations of a mass grounded by linear and nonlinear springs in series using energy balance method and homotopy perturbation method. J. Applied Functional Anlysis, 6(2):182194, 2011.
  • [17] M. Bayat, A. Barari, and M. Shahidi. Dynamic response of axially loaded euler-bernoulli beams. Mechanika, 17(2):172177, 2011.
  • [18] M. Bayat, M. Bayat, and M. Bayat. An analytical approach on a mass grounded by linear and nonlinear springs in series. Int. J. Phys. Sci, 6(2):229236, 2011.
  • [19] M. Bayat and I. Pakar. Application of he's energy balance method for nonlinear vibration of thin circular sector cylinder. Int. J. Phy. Sci, 6(23):55645570, 2011.
  • [20] M. Bayat, I. Pakar, and M. Bayat. Analytical study on the vibration frequencies of tapered beams. Latin American Journal of Solids and Structures, 8(2):149 162, 2011.
  • [21] M. Bayat, I. Pakar, and M. Bayat. Analytical periodic solution for solving nonlinear vibration equations. Tehnicki Vjesnik, 2012.
  • [22] M. Bayat, I. Pakar, and M. Bayat. Application of he's energy balance method for pendulum attached to rolling wheels that are restrained by a spring. Int. J. Phy. Sci, 7(6):913921, 2012.
  • [23] M. Bayat, I. Pakar, and M. Shahidi. Analysis of nonlinear vibration of coupled systems with cubic nonlinearity. Mechanika, 17(6):620629, 2012.
  • [24] M. Bayat, M. Shahidi, A. Barari, and G. Domairry. The approximate analysis of nonlinear behavior of structure under harmonic loading. International Journal of the Physical Sciences, 5(7):10741080, 2010.
  • [25] M. Bayat, M. shahidi, A. Barari, and G. Domairry. Analytical evaluation of the nonlinear vibration of coupled oscillator systems. Zeitschrift fur Naturforschung Section A-A Journal of Physical Sciences, 66(1-2):6774, 2011.
  • [26] M. Bayat, M. Shahidi, and M. Bayat. Application of iteration perturbation method for nonlinear oscillators with discontinuities. Int. J. Phy. Sci, 6(15):36083612, 2011.
  • [27] A. Beléndez. Homotopy perturbation method for a conservative x1/3 force nonlinear oscillator. Computers & Mathematics with Applications, 58(11-12):22672273, 2009.
  • [28] A. Beléndez, T. Beléndez, C. Neipp, A. Hernndez, and M. lvarez. Approximate solutions of a nonlinear oscillator typified as a mass attached to a stretched elastic wire by the homotopy perturbation method. Chaos, Solitons & Fractals, 39(2):746764, 2009.
  • [29] A. Beléndez, A. Hernandez, T. Beléndez, C. Neipp, and A. Marquez. Higher accuracy analytical approximations to a nonlinear oscillator with discontinuity by he's homotopy perturbation method. Physics Letters A, 372(12):20102016, 2008.
  • [30] A. Beléndez, C. Pascual, T. Beléndez, and A. Hernndez. Solution for an anti-symmetric quadratic nonlinear oscillator by a modified he's homotopy perturbation method. Nonlinear Analysis: Real World Applications, 10(1):416427, 2009.
  • [31] A. Beléndez, C. Pascual, E. Fernndez, C. Neipp, and T. Beléndez. Higher-order approximate solutions to the relativistic and duffing-harmonic oscillators by modified he's homotopy methods. Physica Scripta, (77):25004, 2008.
  • [32] A. Beléndez, C. Pascual, S. Gallego, M. Ortuno, and C. Neipp. Application of a modified he's homotopy perturbation method to obtain higher-order approximations of an x1/3 force nonlinear oscillator. Physics Letters A, 371(5-6):421426, 2007.
  • [33] A. Beléndez, C. Pascual, M. Ortuno, T. Beléndez, and S. Gallego. Application of a modified he's homotopy perturbation method to obtain higher-order approximations to a nonlinear oscillator with discontinuities. Nonlinear Analysis: Real World Applications, 10(2):601610, 2009.
  • [34] C. Bender, K. A. Milton, S. S. Pinsky, and Jr. L. Simmons. A new perturbative approach to nonlinear problems. Journal of Mathematical Physics, 30:1447, 1989.
  • [35] J. Biazar and H. Ghazvini. Variational iteration method-a kind of non-linear analytical technique: some examples. Computers & Mathematics with Applications, 54(7-8):10471054, 2007.
  • [36] X. C. Cai and J. F. Liu. Application of the modified frequency formulation to a nonlinear oscillator. Computers & Mathematics with Applications, 61(8):22372240, 2011.
  • [37] X. C. Cai, W. Y.Wu, and M. S. Li. Approximate period solution for a kind of nonlinear oscillator by he's perturbation method. International Journal of Nonlinear Sciences and Numerical Simulation, 7(1):109112, 2006.
  • [38] X.C. Cai and W.Y. Wu. He's frequency formulation for the relativistic harmonic oscillator. Computers & Mathematics with Applications, 58(11-12):23582359, 2009.
  • [39] H. Chan, K. Chung, and Z. Xu. A perturbation-incremental method for strongly non-linear oscillators. International Journal of Non-Linear Mechanics, 31(1):5972, 1996.
  • [40] Y. Chen and J. Liu. Homotopy analysis method for limit cycle flutter of airfoils. Applied Mathematics and Computation, 203(2):854863, 2008.
  • [41] Y. Chen and J. Liu. Homotopy analysis method for limit cycle oscillations of an airfoil with cubic nonlinearities. Journal of Vibration and Control, 16(2):163179, 2010.
  • [42] Y. Cheung, S. Chen, and S. Lau. A modified lindstedt-poincaré method for certain strongly non-linear oscillators. International Journal of Non-Linear Mechanics, 26(3-4):367378, 1991.
  • [43] L. Cveticanin. Vibrations of a coupled two-degree-of-freedom system. Journal of Sound and Vibration, 247(2):279292, 2001.
  • [44] L. Cveticanin. The motion of a two-mass system with non-linear connection. Journal of Sound and Vibration, 252(2):361369, 2002.
  • [45] L. Cveticanin and I. Kovacic. Parametrically excited vibrations of an oscillator with strong cubic negative nonlin earity. Journal of Sound and Vibration, 304(1-2):201212, 2007.
  • [46] M. Darvishi, A.Karami, and B.C. Shin. Application of he's parameter-expansion method for oscillators with smooth odd nonlinearities. Physics Letters A, 372(33):53815384, 2008.
  • [47] S. Das and P. Gupta. Application of homotopy perturbation method and homotopy analysis method to fractional vibration equation. International Journal of Computer Mathematics, 88(2):430441, 2011.
  • [48] R. Dautray, J. L. Lions, M. Artola, and M. Cessenat. Mathematical analysis and numerical methods for science and technology: Spectral theory and applications, volume 3. Springer Verlag, 2000.
  • [49] M. Dehghan, J. Manafian, and A. Saadatmandi. Solving nonlinear fractional partial differential equations using the homotopy analysis method. Numerical Methods for Partial Differential Equations, 26(2):448479, 2010.
  • [50] X. Ding and L. Zhang. Applying he's parameterized perturbation method for solving differential-difference equation. International Journal of Nonlinear Sciences and Numerical Simulation, 10(9):12491252, 2009.
  • [51] G. Domairry and H. Bararnia. An approximation of the analytic solution of some nonlinear heat transfer equations: A survey by using homotopy analysis method. Advanced studies in theoretical physics, 2:507518, 2008.
  • [52] J. Fan. He's frequency-amplitude formulation for the duffing harmonic oscillator. Computers & Mathematics with Applications, 58(11-12):24732476, 2009.
  • [53] S. Feng and L. Chen. Homotopy analysis approach to duffing-harmonic oscillator. Applied Mathematics and Mechanics, 30(9):10831089, 2009.
  • [54] S. T. Francis, I. E. Morse, and R. T. Hinkle. Concrete damage evolution analysis by backscattered ultrasonic waves Prentice-Hall of Japan, 1963.
  • [55] Y. Fu, J. Zhang, and L. Wan. Application of the energy balance method to a nonlinear oscillator arising in the microelectromechanical system (mems). Current Applied Physics, 11(3):482485, 2011.
  • [56] G.Afrouzi, D. D. Ganji, and R. Talarposhti. He's energy balance method for nonlinear oscillators with discontinuities. International Journal of Nonlinear Sciences and Numerical Simulation, 10(3):301304, 2009.
  • [57] D. D. Ganji, G. Afrouzi, and R. Talarposhti. Application of he's variational iteration method for solving the reaction-diffusion equation with ecological parameters. Computers & Mathematics with Applications, 54(7-8):10101017, 2007.
  • [58] D. D. Ganji, M. Gorji, S. Soleimani, and M. Esmaeilpour. Solution of nonlinear cubic-quintic duffing oscillators using he's energy balance method. Journal of Zhejiang University-Science A, 10(9):12631268, 2009.
  • [59] D. D. Ganji, N. Jamshidi, and Z. Ganji. Hpm and vim methods for finding the exact solutions of the nonlin1155 ear dispersive equations and seventh-order sawada-kotera equation. International Journal of Modern Physics B, 23(1):3952, 2009.
  • [60] D. D. Ganji, S. Karimpour, and S. S. Ganji. Approximate analytical solutions to nonlinear oscillations of non-natural systems using he's energy balance method. Progress In Electromagnetics Research, 5:4354, 2008.
  • [61] D. D. Ganji, S. Karimpour, and S. S. Ganji. He's iteration perturbation method to nonlinear oscillations of me chanical systems with single-degree-of freedom. International Journal of Modern Physics B, 23(11):24692477, 2009.
  • [62] D. D. Ganji, M. Nourollahi, and M. Rostamian. A comparison of variational iteration method with adomian's decomposition method in some highly nonlinear equations. International Journal of Science & Technology, 2(2):179188, 2007.
  • [63] D. D. Ganji and A. Sadighi. Application of he's homotopy-perturbation method to nonlinear coupled systems of reaction-diffusion equations. International Journal of Nonlinear Sciences and Numerical Simulation, 7(4):411418, 2006.
  • [64] D. D. Ganji and A. Sadighi. Application of homotopy-perturbation and variational iteration methods to nonlinear heat transfer and porous media equations. Journal of Computational and Applied Mathematics, 207(1):2434, 2007.
  • [65] S. S. Ganji, D. D. Ganji, Z. Ganji, and S. Karimpour. Periodic solution for strongly nonlinear vibration systems by he's energy balance method. Acta Applicandae Mathematicae, 106(1):7992, 2009.
  • [66] S. S. Ganji, D. D. Ganji, and S. Karimpour. Determination of the frequency-amplitude relation for nonlinear oscillators with fractional potential using he's energy balance method. Progress In Electromagnetics Research, 5:2133, 2008.
  • [67] S. S. Ganji, D. D. Ganji, and S. Karimpour. He's energy balance and he's variational methods for nonlinear oscillations in engineering. International Journal of Modern Physics B, 23(3):461471, 2009.
  • [68] S. S. Ganji, D. D. Ganji, S. Karimpour, and H. Babazadeh. Applications of he's homotopy perturbation method to obtain second-order approximations of the coupled two-degree-of-freedom systems. International Journal of Nonlinear Sciences and Numerical Simulation, 10(3):305314, 2009.
  • [69] S. S. Ganji, M. G. Sfahani, S. M. M. Tonekaboni, A. Moosavi, and D. D. Ganji. Higher-order solutions of coupled systems using the parameter expansion method. Mathematical Problems in Engineering, 20, 2009.
  • [70] S.S. Ganji, A. Barari, and D.D. Ganji. Approximate analysis of two-mass-spring systems and buckling of a column. Computers & Mathematics with Applications, 2012.
  • [71] S.S. Ganji, D.D. Ganji, H. Babazadeh, and S. Karimpour. Variational approach method for nonlinear oscillations of the motion of a rigid rod rocking back and cubic. Progress In Electromagnetics Research, 4:2332, 2008.
  • [72] S.S. Ganji, D.D. Ganji, H. Babazadeh, and N. Sadoughi. Application of amplitude-frequency formulation to nonlinear oscillation system of the motion of a rigid rod rocking back. Mathematical Methods in the Applied Sciences, 33(2):157166, 2010.
  • [73] S.S. Ganji, D.D. Ganji, A. Davodi, and S. Karimpour. Analytical solution to nonlinear oscillation system of the motion of a rigid rod rocking back using max-min approach. Applied Mathematical Modelling, 34(9):26762684, 2010.
  • [74] L. Geng and X.C. Cai. He's frequency formulation for nonlinear oscillators. European Journal of Physics, 28:923, 2007.
  • [75] E Ghasemi, M. Bayat, and M. Bayat. Visco-elastic mhd flow of walters liquid b fluid and heat transfer over a non-isothermal stretching sheet. Int. J. Phy. Sci., 6(21):50225039, 2011.
  • [76] A. Ghorbani and J. Saberi-Nadjafi. An effective modification of he's variational iteration method. Nonlinear Analysis: Real World Applications, 10(5):28282833, 2009.
  • [77] J. H. Ginsberg. Mechanical and structural vibrations: theory and applications John Wiley & Sons, 2001.
  • [78] D. Goorman. Free vibrations of beams and shafts. Appl. Mech., ASME, 18:135139, 1975.
  • [79] M. Hamdan and N. Shabaneh. On the large amplitude free vibrations of a restrained uniform beam carrying an intermediate lumped mass. Journal of Sound and Vibration, 199(5):711736, 1997.
  • [80] J. He. Some new approaches to duffing equation with strongly and high order nonlinearity (ii) parametrized perturbation technique. Communications in Nonlinear Science and Numerical Simulation, 4(1):8183, 1999.
  • [81] J. H. He. Homotopy perturbation technique. Computer methods in applied mechanics and engineering, 178(3-4):257262, 1999.
  • [82] J. H. He. Variational iteration method-a kind of non-linear analytical technique: some examples. International Journal of Non-Linear Mechanics, 34(4):699708, 1999.
  • [83] J. H. He. review on some new recently developed nonlinear analytical techniques. International Journal of Nonlinear Sciences and Numerical Simulation, 1(1):5170, 2000.
  • [84] J. H. He. A coupling method of a homotopy technique and a perturbation technique for non-linear problems. International Journal of Non-Linear Mechanics, 35:3743, 2000.
  • [85] J. H. He. A new perturbation technique which is also valid for large parameters. Journal of Sound and Vibration, 229(5):12571263, 2000.
  • [86] J. H. He. Bookkeeping parameter in perturbation methods. International Journal of Nonlinear Sciences and Numerical Simulation, 2(3):257264, 2001.
  • [87] J. H. He. Iteration perturbation method for strongly nonlinear oscillations. Journal of Vibration and Control, 7(5):631, 2001.
  • [88] J. H. He. Modified lindsted-poincare methods for some strongly nonlinear oscillations part iii: double series expansion. International Journal of Nonlinear Sciences and Numerical Simulation, 2(4):317320, 2001.
  • [89] J. H. He. Modified lindstedt-poincare methods for some strongly non-linear oscillations: Part i: expansion of a constant. International Journal of Non-Linear Mechanics, 37(2):309314, 2002.
  • [90] J. H. He. Preliminary report on the energy balance for nonlinear oscillations. Mechanics Research Communications, 29(2-3):107111, 2002.
  • [91] J. H. He. Homotopy perturbation method: a new nonlinear analytical technique. Applied Mathematics and Computation, 135(1):7379, 2003.
  • [92] J. H. He. Linearized perturbation technique and its applications to strongly nonlinear oscillators. Computers & Mathematics with Applications, 45(1-3):18, 2003.
  • [93] J. H. He. Asymptotology by homotopy perturbation method. Applied Mathematics and Computation, 156(3):591596, 2004.
  • [94] J. H. He. Comparison of homotopy perturbation method and homotopy analysis method. Applied Mathematics and Computation, 156(2):527539, 2004.
  • [95] J. H. He. The homotopy perturbation method for nonlinear oscillators with discontinuities. Applied Mathematics and Computation, 151(1):287292, 2004.
  • [96] J. H. He. Application of homotopy perturbation method to nonlinear wave equations. Chaos, Solitons & Fractals, 26(3):695700, 2005.
  • [97] J. H. He. Limit cycle and bifurcation of nonlinear problems. Chaos, Solitons & Fractals, 26(3):827833, 2005.
  • [98] J. H. He. New interpretation of homotopy perturbation method. International Journal of Modern Physics B, 20:25612568, 2006.
  • [99] J. H. He. Variational iteration method-some recent results and new interpretations. Journal of Computational and Applied Mathematics, 34:317, 2007.
  • [100] J. H. He. An elementary introduction to recently developed asymptotic methods and nanomechanics in textile engineering. International Journal of Modern Physics B (IJMPB), 22(21):34873578, 2008.
  • [101] J. H. He. Recent development of the homotopy perturbation method. Topological Methods in Nonlinear Analysis, 31(2):205209, 2008.
  • [102] J. H. He. An elementary introduction to the homotopy perturbation method. Computers & Mathematics with Applications, 57(3):410412, 2009.
  • [103] J. H. He and D. H. Shou. Application of parameter-expanding method to strongly nonlinear oscillators. International Journal of Nonlinear Sciences and Numerical Simulation, 8:121124, 2007.
  • [104] J. H. He and X. H.Wu. Variational iteration method: new development and applications. Computers & Mathematics with Applications, 54(7-8):881894, 2007.
  • [105] J.H. He. He chengtian's inequality and its applications. Applied Mathematics and Computation, 153(3):887891, 2004.
  • [106] J.H. He. Solution of nonlinear equations by an ancient chinese algorithm. Applied Mathematics and Computation, 151(1):293297, 2004.
  • [107] J.H. He. Variational approach for nonlinear oscillators. Chaos, Solitons & Fractals, 34(5):14301439, 2007.
  • [108] J.H. He. Comment on'he's frequency formulation for nonlinear oscillators'. European Journal of Physics, 29:L19, 2008.
  • [109] J.H. He. An improved amplitude-frequency formulation for nonlinear oscillators. International Journal of Nonlinear Sciences and Numerical Simulation, 9(2):211212, 2008.
  • [110] J.H He. Max-min approach to nonlinear oscillators. International Journal of Nonlinear Sciences and Numerical Simulation, 9(2):207210, 2008.
  • [111] J.H. He. Hamiltonian approach to nonlinear oscillators. Physics Letters A, 374(23):23122314, 2010.
  • [112] J.H. He and J. Tang. Rebuild of king fang 40 bc musical scales by he's inequality. Applied Mathematics and Computation, 168(2):909914, 2005.
  • [113] M. H. Holmes. Introduction to perturbation methods Springer, 1995.
  • [114] S. Hoseini, T. Pirbodaghi, M. Asghari, G. Farrahi, and M. Ahmadian. Nonlinear free vibration of conservative oscillators with inertia and static type cubic nonlinearities using homotopy analysis method. Journal of Sound and Vibration, 316(1-5):263273, 2008.
  • [115] M. Jalaal, E. Ghasemi, D. D. Ganji, H. Bararnia, S. Soleimani, G. M. Nejad, and M. Esmaeilpour. Effect of temperature-dependency of surface emissivity on heat transfer using the parameterized perturbation method. Thermal Science (Suppl. 1), 15(1):123125, 2011.
  • [116] N. Jamshidi and D. D. Ganji. Application of energy balance method and variational iteration method to an oscillation of a mass attached to a stretched elastic wire. Current Applied Physics, 10(2):484486, 2010.
  • [117] S. H. A. Kachapi, D. D. Ganji, A. G. Davodi, and S. M. Varedi. Periodic solution for strongly nonlinear vibration systems by he's variational iteration method. Mathematical Methods in the Applied Sciences, 32(18):23392349, 2009.
  • [118] M. Kaya and S. Altay Demirbag. Application of parameter expansion method to the generalized nonlinear discontinuity equation. Chaos, Solitons & Fractals, 42(4):19671973, 2009.
  • [119] M.O. Kaya and S.A. Demirba. Higher-order approximate periodic solutions of a nonlinear oscillator with discontinuity by variational approach. Mathematical Problems in Engineering, 2009.
  • [120] H. E. Khah and D. D. Ganji. A study on the motion of a rigid rod rocking back and cubic-quintic duffing oscillators by using he's energy balance method. International Journal of Nonlinear Science, 10(4):447451, 2010.
  • [121] H.E. Khah and D.D. Ganji. Application of he's variational approach method for strongly nonlinear oscillators. VAM, 2(2):1, 2010.
  • [122] H. Khaleghi, D. D. Ganji, and A. Sadighi. Application of variational iteration and homotopy-perturbation methods to nonlinear heat transfer equations with variable coefficients. Numerical Heat Transfer, Part A: Applications, 52(1):2542, 2007.
  • [123] Y. Khan and Q. Wu. Homotopy perturbation transform method for nonlinear equations using he's polynomials. Computers & Mathematics with Applications, 61(8):19631967, 2011.
  • [124] Y. Khan, Q. Wu, H. Askari, Z. Saadatnia, and M. Kalami-Yazdi. Nonlinear vibration analysis of a rigid rod on a circular surface via hamiltonian approach. Mathematical and Computational Applications, 15(5):974977, 2010.
  • [125] B. G. Korenev and L. M. Reznikov. Dynamic vibration absorbers: theory and technical applications Wiley London, 1993.
  • [126] S.S. Kutanaei, E. Ghasemi, and M. Bayat. Mesh-free modeling of two-dimensional heat conduction between eccentric circular cylinders. Int. J. Phy. Sci, 6(16):40444052, 2011.
  • [127] S. Lai and C. Lim. Nonlinear vibration of a two-mass system with nonlinear stiffnesses. Nonlinear Dynamics, 49(1):233249, 2007.
  • [128] S. Liao. Homotopy analysis method and its application PhD thesis, Shanghai Jiao Tong University, Shanghai, China.
  • [129] S. Liao. Beyond perturbation: introduction to the homotopy analysis method, volume 2. CRC Press, 2004.
  • [130] S. Liao. On the homotopy analysis method for nonlinear problems. Applied Mathematics and Computation, 147(2):499513, 2004.
  • [131] S.J. Liao and A. Chwang. Application of homotopy analysis method in nonlinear oscillations. Journal of applied mechanics, 65:914, 1998.
  • [132] C. Lim, B. Wu, and W. Sun. Higher accuracy analytical approximations to the duffing-harmonic oscillator. Journal of Sound and Vibration, 296(4-5):10391045, 2006.
  • [133] Y. K. Lin and G. Q. Cai. Probabilistic structural dynamics: advanced theory and applications McGraw-Hill Professional, 2004.
  • [134] H. M. Liu. Approximate period of nonlinear oscillators with discontinuities by modified lindstedt-poincare method. Chaos, Solitons & Fractals, 23(2):577579, 2005.
  • [135] J.F. Liu. He's variational approach for nonlinear oscillators with high nonlinearity. Computers & Mathematics with Applications, 58(11-12):24232426, 2009.
  • [136] J. Lu. He's variational iteration method for the modified equal width equation. Chaos, Solitons & Fractals, 39(5):21022109, 2009.
  • [137] R. H. Lyon. Statistical energy analysis of dynamical systems: theory and applications 1975.
  • [138] V. Marinca and N. Herisanu. A modified iteration perturbation method for some nonlinear oscillation problems. Acta Mechanica, 184(1):231242, 2006.
  • [139] V. Marinca and N. Herisanu. Periodic solutions for some strongly nonlinear oscillations by he's variational iteration method. Computers & Mathematics with Applications, 54(7-8):11881196, 2007.
  • [140] M.Bayat and I. Pakar. Nonlinear free vibration analysis of tapered beams by hamiltonian approach. Journal of vibroengineering, 13(4):654661, 2011.
  • [141] I. Mehdipour, D. D. Ganji, and M. Mozaffari. Application of the energy balance method to nonlinear vibrating equations. Current Applied Physics, 10(1):104112, 2010.
  • [142] M. Momeni, N. Jamshidi, A. Barari, and D. D.Ganji. Application of he's energy balance method to duffing-harmonic oscillators. International Journal of Computer Mathematics, 88(1):135144, 2011.
  • [143] M. Naghipour, D.D. Ganji, S.H. Hashemi, and H. Jafari. Analysis of nonlinear oscillation systems using He's variational approach IOP Publishing, 2008.
  • [144] A. H. Nayfeh. Perturbation methods, volume 6. Wiley Online Library, 1973.
  • [145] A. H. Nayfeh and D. T. Mook. Nonlinear oscillations, volume 31. Wiley Online Library, 1979.
  • [146] Jr. R. E. O'Malley. Introduction to singular perturbations. Applied Mathematics and Mechanics, 14, 1974. DTIC Document.
  • [147] T. Ozis and A. Yildirim. Determination of periodic solution for a u1/3 force by he's modified lindstedt-poincaré method. Journal of Sound and Vibration, 301(1-2):415419, 2007.
  • [148] T. Ozis and A. Yildirim. A note on he's homotopy perturbation method for van der pol oscillator with very strong nonlinearity. Chaos, Solitons & Fractals, 34(3):989991, 2007.
  • [149] T. Ozis and A. Yildirim. Generating the periodic solutions for forcing van der pol oscillators by the iteration perturbation method. Nonlinear Analysis: Real World Applications, 10(4):19841989, 2009.
  • [150] I. Pakar and M. Bayat. Analytical solution for strongly nonlinear oscillation systems using energy balance method. Int. J. Phys. Sci, 6(22):51665170, 2011.
  • [151] I. Pakar and M. Bayat. Analytical study on the non-linear vibration of euler-bernoulli beams. Journal of vibroengineering, 14(1):216224, 2012.
  • [152] I. Pakar, M. Bayat, and M. Bayat. Analytical evaluation of the nonlinear vibration of a solid circular sector object. Int. J. Phys. Sci, 6(30):68616866, 2011.
  • [153] I. Pakar, M. Bayat, and M. Bayat. On the approximate analytical solution for parametrically nonlinear excited oscillators. Journal of vibroengineering, 14(1):423429, 2012.
  • [154] I. Pakar, M. Shahidi, D.D. Ganji, and M. Bayat. Approximate analytical solutions for nonnatural and nonlinear vibration systems using he's variational approach method. Journal of Applied Functional Anlysis, 6(2):225232, 2011.
  • [155] T. Pirbodaghi, M. Ahmadian, and M. Fesanghary. On the homotopy analysis method for non-linear vibration of beams. Mechanics Research Communications, 36.
  • [156] T. Pirbodaghi and S. Hoseini. Nonlinear free vibration of a symmetrically conservative two-mass system with cubic nonlinearity. Journal of Computational and Nonlinear Dynamics, 5:11006.
  • [157] Y. Qian and S. Chen. Accurate approximate analytical solutions for multi-degree-of-freedom coupled van der pol duffing oscillators by homotopy analysis method. Communications in Nonlinear Science and Numerical Simulation, 15.
  • [158] Y. Qian, S. Lai, W. Zhang, and Y. Xiang. Study on asymptotic analytical solutions using ham for strongly nonlinear vibrations of a restrained cantilever beam with an intermediate lumped mass. Numerical Algorithms, pages 122, 2011.
  • [159] Y. Qian, W. Zhang, B. Lin, and S. Lai. Analytical approximate periodic solutions for two-degree-of-freedom coupled van der pol-duffing oscillators by extended homotopy analysis method. Acta Mechanica, pages 114, 2011.
  • [160] Z. Qiu and X. Wang. Parameter perturbation method for dynamic responses of structures with uncertain-but bounded parameters based on interval analysis. International journal of solids and structures, 42(18):49584970, 2005.
  • [161] J. Ramos. An artificial parameter-linstedt-poincaré method for oscillators with smooth odd nonlinearities. Chaos, Solitons & Fractals, 41(1):380393, 2009.
  • [162] S.S. Rao. Mechanical Vibrations (3rd edition) ed Addison Wesley, 1995.
  • [163] Z.F. Ren and W.K. Gui. He's frequency formulation for nonlinear oscillators using a golden mean location. Computers & Mathematics with Applications, 61(8):19871990, 2011.
  • [164] Z.F. Ren, G.Q. Liu, Y.X. Kang, H.Y. Fan, H.M. Li, X.D. Ren, and W.K. Gui. Application of he's amplitude frequency formulation to nonlinear oscillators with discontinuities. Physica Scripta, 80:45003, 2009.
  • [165] D. Younesian H. Askari Z. Saadatnia and M. KalamiYazdi. Frequency analysis of strongly nonlinear generalized duffing oscillators using he's frequency-amplitude formulation and he's energy balance method. Computers & Mathematics with Applications, 59(9):32223228, 2010.
  • [166] A. Sadighi and D. Ganji. Solution of the generalized nonlinear boussinesq equation using homotopy perturbation and variational iteration methods. International Journal of Nonlinear Sciences and Numerical Simulation, 8(3):21582162, 2008.
  • [167] A. Sadighi and D. D. Ganji. Exact solutions of nonlinear diffusion equations by variational iteration method. Computers & Mathematics with Applications, 54(7-8):11121121, 2007.
  • [168] M. Shaban, D. D. Ganji, and M. M. Alipour. Nonlinear fluctuation, frequency and stability analyses in free vibration of circular sector oscillation systems. Current Applied Physics, 10(5):12671285, 2010.
  • [169] M. Shahidi, M. Bayat, I. Pakar, and G. Abdollahzadeh. On the solution of free non-linear vibration of beams. Int. J. Phys. Sci, 6(7):16281634, 2011.
  • [170] F. Shakeri and M. Dehghan. Numerical solution of a biological population model using he's variational iteration method. Computers & Mathematics with Applications, 54(7-8):11971209, 2007.
  • [171] Y.Y. Shen and L.F. Mo. The max-min approach to a relativistic equation. Computers & Mathematics with Applications, 58(11-12):21312133, 2009.
  • [172] L. Shijun. Homotopy analysis method: A new analytic method for nonlinear problems. Applied Mathematics and Mechanics, 19.
  • [173] D. H. Shou. Variational approach to the nonlinear oscillator of a mass attached to a stretched wire. Physica Scripta, 77:45006, 2008.
  • [174] D. H. Shou. The homotopy perturbation method for nonlinear oscillators. Computers & Mathematics with Applications, 58(11-12):24562459, 2009.
  • [175] D.H. Shou. Variational approach for nonlinear oscillators with discontinuities. Computers & Mathematics with Applications, 58(11-12):24162419, 2009.
  • [176] A. M. Siddiqui, T. Haroon, S. Bhatti, and A. R. Ansari. A comparison of the adomian and homotopy perturbation methods in solving the problem of squeezing flow between two circular plates. Mathematical Modelling And Analysis, 15(4):491504, 2010.
  • [177] D. Slota and A. Zielonka. A new application of he's variational iteration method for the solution of the one-phase stefan problem. Computers & Mathematics with Applications, 58(11-12):24892494, 2009.
  • [178] S. Soleimani, A. Ebrahimnejad, M. Esmaeilpour, D. D. Ganji, and A. M. Azizkhani. Energy balance method to sub harmonic resonances of nonlinear oscillations with parametric excitation. Far East Journal of Applied Mathematics, 36(2):203212, 2009.
  • [179] F. Soltanian, S. M. Karbassi, and M. M. Hosseini. Application of he's variational iteration method for solution of differential-algebraic equations. Chaos, Solitons & Fractals, 41(1):436445, 2009.
  • [180] S.S.Rao. Mechanical vibrations. 1986.
  • [181] W. Sun, B. Wu, and C. Lim. Approximate analytical solutions for oscillation of a mass attached to a stretched elastic wire. Journal of Sound and Vibration, 300(3-5):10421047, 2007.
  • [182] Z. L. Tao. The frequency-amplitude relationship for some nonlinear oscillators with discontinuity by he's variational method. Physica Scripta, (78):15004, 2004.
  • [183] Z.L. Tao. Frequency-amplitude relationship of nonlinear oscillators by he's parameter-expanding method. Chaos, Solitons & Fractals, 41(2):642645, 2009.
  • [184] M. Tatari and M. Dehghan. On the convergence of he's variational iteration method. Journal of Computational and Applied Mathematics, 207(1):121128, 2007.
  • [185] S. Telli and O. Kopmaz. Free vibrations of a mass grounded by linear and nonlinear springs in series. Journal of Sound and Vibration, 289(4-5):689710, 2006.
  • [186] W. Thomson. Theory of vibration with applications Taylor & Francis.
  • [187] W. T. Thomson. Vibration theory and applications Prentice-Hall, 1965.
  • [188] F. Tian and F. Austin. Application of he's max-min approach to a generalized nonlinear oscillator. World Applied Sciences Journal, 6(7):10051007, 2009.
  • [189] F. Tse, I. E, Morse, and RT Hinkte. Mechanical Vibrations. Theory and Applications 1978.
  • [190] S. Q. Wang and J. H. He. Nonlinear oscillator with discontinuity by parameter-expansion method. Chaos, Solitons & Fractals, 35(4):688691, 2008.
  • [191] A. M. Wazwaz. The variational iteration method: a powerful scheme for handling linear and nonlinear diffusion equations. Computers & Mathematics with Applications, 54(7-8):933939, 2007.
  • [192] A. M. Wazwaz. The variational iteration method: A reliable analytic tool for solving linear and nonlinear wave equations. Computers & Mathematics with Applications, 54(7-8):926932, 2007.
  • [193] J. Wen and Z. Cao. Nonlinear oscillations with parametric excitation solved by homotopy analysis method. Acta Mechanica Sinica, 24(3):325329, 2008.
  • [194] R. Wu, J. Wang, J. Du, Y. Hu, and H. Hu. Solutions of nonlinear thickness-shear vibrations of an infinite isotropic plate with the homotopy analysis method. Numerical Algorithms, pages 114, 2011.
  • [195] L. Xu. Application of he's parameter-expansion method to an oscillation of a mass attached to a stretched elastic wire. Physics Letters A, 368(3-4):259262, 2007.
  • [196] L. Xu. Determination of limit cycle by he's parameter-expanding method for strongly nonlinear oscillators. Journal of Sound and Vibration, 302(1-2):178184, 2007.
  • [197] L. Xu. He's parameter-expanding methods for strongly nonlinear oscillators. Journal of Computational and Applied Mathematics, 207(1):148154, 2007.
  • [198] L. Xu. Application of hamiltonian approach to an oscillation of a mass attached to a stretched elastic wire. Mathematical and Computational Applications, 15(5):901906, 2010.
  • [199] M.K. Yazdi, Y. Khan, M.Madani, H. Askari, Z. Saadatnia, and A. Yildirim. Analytical solutions for autonomous conservative nonlinear oscillator. International Journal of Nonlinear Sciences and Numerical Simulation, 11(11):975980, 2010.
  • [200] A. YIldIrIm. Determination of the frequency-amplitude relation for a duffing-harmonic oscillator by the energy balance method. Computers & Mathematics with Applications, 54(7-8):11841187, 2007.
  • [201] A. Yildirim. Determination of periodic solutions for nonlinear oscillators with fractional powers by he's modified lindstedt-poincaré method. Meccanica, 45(1):16, 2010.
  • [202] A. Yildirim and Y. Cherruault. Analytical approximate solution of a sir epidemic model with constant vaccination strategy by homotopy perturbation method. Kybernetes, 38(9):15661575, 2009.
  • [203] A. Yildirim, Z. Saadatnia, and H. Askari. Application of the hamiltonian approach to nonlinear oscillators with rational and irrational elastic terms. Mathematical and Computer Modelling, 2011.
  • [204] A. Yildirim, Z. Saadatnia, H. Askari, Y. Khan, and M. KalamiYazdi. Higher order approximate periodic solutions for nonlinear oscillators with the hamiltonian approach. Applied Mathematics Letters, 2011.
  • [205] D. Younesian, H. Askari, Z. Saadatnia, and M. KalamiYazdi. Higher order approximate periodic solutions for nonlinear oscillators with the hamiltonian approach. Analytical approximate solutions for the generalized nonlinear oscillator, 2011.
  • [206] S. Yousefi, M. Dehghan, and A. Lotfi. Finding the optimal control of linear systems via he's variational iteration method. International Journal of Computer Mathematics, 87(5):10421050, 2010.
  • [207] D.Q. Zeng. Nonlinear oscillator with discontinuity by the max-min approach. Chaos, Solitons & Fractals, 42(5):28852889, 2009.
  • [208] H. Koak A. Yildirim D. Zhang, K. Boubaker, and S. T. Mohyud-Din. A comparative study of analytical solutions to the coupled van-der-pol's non-linear circuits using the he's method (hpem) and (bpes). 2011.
  • [209] H. L. Zhang. Periodic solutions for some strongly nonlinear oscillations by he's energy balance method. Computers & Mathematics with Applications, 58(11-12):24802485, 2009.
  • [210] H. L. Zhang and L. J. Qin. An ancient chinese mathematical algorithm and its application to nonlinear oscillators. Computers & Mathematics with Applications, 61(8):20712075, 2011.
  • [211] H.L. Zhang. Application of he's amplitude-frequency formulation to a nonlinear oscillator with discontinuity. Computers & Mathematics with Applications, 58(11-12):21972198, 2009.
  • [212] J. Zhang. Variational approach to solitary wave solution of the generalized zakharov equation. Computers & Mathematics with Applications, 54(7-8):10431046, 2007.
  • [213] W. Zhang, Y. Qian, M. Yao, and S. Lai. Periodic solutions of multi-degree-of-freedom strongly nonlinear coupled van der pol oscillators by homotopy analysis method. Acta Mechanica, pages 117, 2011.
  • [214] Y.N. Zhang, F. Xu, and L. Deng. Exact solution for nonlinear schrdinger equation by he's frequency formulation. Computers & Mathematics with Applications, 58(11-12):24492451, 2009.
  • [215] L. Zhao. He's frequency-amplitude formulation for nonlinear oscillators with an irrational force. Computers & Mathematics with Applications, 58(11-12):24772479, 2009.
  • [216] T. Zhong and J. Zhang. Frequency-amplitude relationship for nonlinear oscillator with discontinuity. Mathematical and Computational Applications, 15(5):907909, 2010.
  • [217] L. H. Zhou and J. He. The variational approach coupled with an ancient chinese mathematical method to the relativistic oscillator. Mathematical and Computational Applications, 15(5):930935, 2010.
  • [218] T. zis and A. YIldIrIm. Comparison between adomian's method and he's homotopy perturbation method. Computers & Mathematics with Applications, 56(5):12161224, 2008.

Publication Dates

  • Publication in this collection
    17 Jan 2013
  • Date of issue
    Apr 2012

History

  • Received
    02 Feb 2011
  • Accepted
    22 May 2012
Individual owner www.lajss.org - São Paulo - SP - Brazil
E-mail: lajsssecretary@gmsie.usp.br