Acessibilidade / Reportar erro

Pinus spp. NA PRODUÇÃO DE PAINÉIS DE PARTÍCULAS ORIENTADAS (OSB)1 1 Trabalho extraído da tese de doutorado do primeiro autor.

Pinus spp. IN THE PRODUCTION OF ORIENTED STRAND BOARD (OSB)

RESUMO

Este trabalho teve como objetivo estudar os efeitos das espécies e adição de parafina nas propriedades de painéis OSB. Foi concluído que as espécies estudadas são homogêneas entre si e produzem painéis de qualidade semelhante, a adição de parafina melhora substancialmente a estabilidade dimensional dos painéis. Os painéis produzidos atenderam às especificações mínima da norma canadense CSA 0437.0.

Palavras-chave:
painéis de partículas orientadas; variáveis de processamento; Pinus spp; teor de parafina

ABSTRACT

This work had the objective to study the species effects, and the wax addition in the OSB panels properties. The final conclusion was that the studied species are homogeneous among themselves and they produce similar quality panels. The produced panels attended to the minimum specifications of the CSA 0437.0 Canadian standard.

Key words:
oriented strand board; variables of processing; Pinus spp; wax content

Texto completo disponível apenas em PDF.

Full text available only in PDF format.

REFERÊNCIAS BIBLIOGRÁ FICAS

  • AMERICAN SOCIETY FOR TESTING MATERIALS. Standard methods of evaluating the properties of woodbase fiber and particle materials: ASTM D-1037-91 Philladelphia, 1991. v. 04-09 (Annual Book of ASTM standards).
  • AU, K.C.; GERTJEJANSEN, R.O.; LARNTZ, K. Use of response surface methodology to maximize paper birch utilization in a three-layer, two species oriented strand board. Wood and Fiber Science, Madison, v. 24, n. 4, p. 432-441, 1992.
  • CANADIAN STANDARDS ASSOCIATION. OSB and Waferboard: CSA 0437.0 - 93. Ontário, 1993. 18p.
  • CLOUTIER, A. Oriented stranboard (OSB): raw material, manufacturing process, properties of wood-base fiber and particle materials. In: INTERNATIONAL SEMINAR ON SOLID WOOD PRODUCTS OF HIGH TECHNOLOGY, 1., 1998, Belo Horizonte. Anais… Belo Horizonte: SIF, 1998. p. 173-185.
  • FORD-ROBERTSON, F. C. Terminology of forest science, technology practice and products. Washington D.C.: Society of American Foresters, 1971. 349p.
  • KELLY, M.W. A critical literature review of relationships between processing parameters and physical properties of particleboards. Madison, 1977. 66p. U.S. For. Prod. Lab. General Technical Report FPL - 10.
  • LELLES, J. G. de; SILVA, J. de C. Novos usos para a madeira. Revista da Madeira, Curitiba, v. 6, n. 36, p. 42-45, 1998.
  • MALONEY, T. M. Modern particleboard e dry-process fiberboard manufacturing. 2. ed. São Francisco: M. Freeman, 1993. 689p.
  • MALONEY, T. M. The family of wood composite materials. Forest Products Journal, Madison, v. 46, n. 2, p. 19-26, 1996.
  • MATOS, J.L.M. Ciclo de prensa em chapas de partículas estruturais “Waferboards”. 1988. 163p. Dissertação (Mestrado em Engenharia Florestal). Universidade Federal do Paraná, Curitiba. 1988.
  • DIN - DEUTSCHES INSTITUT FUR NORMUNG. Testing of wood chipboards, bending test, determination of bending strength: DIN 52362. Berlin, 1982. p.39-40.
  • SUZUKI, S.; TAKEDA, K. Production and properties of Japanese oriented strand board I: effect of strand length and orientation on strength properties of sugi oriented strand board. Journal Japan Wood Science, Tokyo, v. 46, p. 289-295, 2000.
  • TAPPI - TECHNICAL ASSOCIATION OF PULP AND PAPER INDUSTRY. Testing and methods. Atlanta: Tappi Press, 1994.
  • WANG, S.; WINISTORFER, P. M. The effect of species and species distribution on the layer characteristics of OSB. Forest Products Journal , Madison, v. 50, n. 4, p. 37-44, 2000.
  • WINISTORFER, P.M.; MCFARLAND, D.L.; RICHARD, C.S. Evaluating the performance of ten wax formulations and three application rates on properties of oriented strand board. In: THE TWENTY-SIXTH WASHINGTON STATE UNIVERSITY INTERNATIONAL PARTICLEBOARD-COMPOSITE MATERIALS SYMPOSIUM, 1992, Pulmann. Anais... Pulmann, 1992. p. 236-250.
  • YUSOFF, M. N. M.; HORIE, H. The manufacture of oriented strand boards from rubeerwood. Journal of Tropical Forest Products, Malaysia, v. 3, n. 1, p. 43-50, 1997.
  • ZHANG, M. et al Manufacture and properties of high-performance oriented strand board composite using thin strands. Japan Wood Science, Tokyo, n. 44, p. 191-197, 1998.
  • ZHOW, D. A estudy of oriented structural board made from hybrid poplar. Phisical and mechanical properties of OSB. Holz Als Roh Und Werkstoff, Berlin, v. 48, n. 7-8, p. 293-296, 1990.
  • ZOBEL, B.J.; VAN BUIJTENEN, J.P. Wood variation. Berlin: Springer, 1989. 290p.
  • 1
    Trabalho extraído da tese de doutorado do primeiro autor.

Datas de Publicação

  • Publicação nesta coleção
    Jul-Dec 2002

Histórico

  • Recebido
    22 Mar 2002
  • Aceito
    11 Set 2002
Universidade Federal de Santa Maria Av. Roraima, 1.000, 97105-900 Santa Maria RS Brasil, Tel. : (55 55)3220-8444 r.37, Fax: (55 55)3220-8444 r.22 - Santa Maria - RS - Brazil
E-mail: cienciaflorestal@ufsm.br