Acessibilidade / Reportar erro

Experimental Determination of Temperature During Rotary Friction Welding of AA1050 Aluminum with AISI 304 Stainless Steel

Abstract:

The purpose of this study was the temperature monitoring at bonding interface during the rotary friction welding process of dissimilar materiais: AA1050 aluminum with AISI 304 stainless steel. As it is directly related to the mechanical strenght of the junction, its experimental determination in real time is of fundamental importance for understanding and characterizing the main process steps, and the definition and optimization of parameters. The temperature gradients were obtained using a system called Thermocouple Data-Logger, which allowed monitoring and recording data in real-time operation. In the graph temperature versus time obtained, the heating rates, cooling were analyzed, and the maximum temperature was determined that occurred during welding, and characterized every phases of the process. The efficiency of this system demonstrated by experimental tests and the knowledge of the temperature at the bonding interface open new Unes of research to understand the process of friction welding.

Keywords:
Friction Welding; Aluminum; Stainless Steel; Dissimilar Materials; Temperature

Full text available only in PDF format.

REFERENCES

  • Alves, E. P., 2010a, "Junções de Materiais Dissimilares utilizando o Processo de Soldagem por Fricção Rotativa", Dissertação (Mestrado em Engenharia e Tecnologia Espaciais/ Ciência e Tecnologia de Materiais e Sensores) - Instituto de Atividades Espaciais - INPE, São José dos Campos, Brasil.
  • Alves, E. P. et al, 2010b, "Welding of AA1050 aluminum with AISI 304 stainless Steel by rotary friction welding process", Journal of Aerospace Technology and Management, São José dos Campos, Vol. 2, No. 3, pp.301-306.
  • Aritoshi, M. and Okita, K., 2003, "Friction Welding of Dissimilar Metals", Journal of the Japan Welding Society, pp. 24, Translated by Welding International, pp.271-275.
  • Ambroziak, A. et al, 2007, "Friction welding of dissimilar metal joints with intermediate layers", Journal of Achievements in Materials and Manufacturing Engineering, Vol. 21, pp. 37-40, Issue 2.ASM, 1993, "Metals Handbook: Forming and Forging", Vol. 14, 9th ed. Processing of aluminum alloy forgings, Metals Park, Ohio, USA.
  • Bagnato, O. R., 2002, "Propriedades Mecânicas de juntas AlSil2 / Al203 soldadas por difusão", Tese (Doutorado em Engenharia Mecânica) - Universidade Estadual de Campinas, Faculdade de Engenharia Mecânica, Campinas.
  • Banker, J. et al, 2002, "Aluminum-Steel Electric Transition Joints, Effects of Temperature and Time upon Mechanical Properties". In: Draft 131ST Annual Meeting, February 17-21, 2002, Seattle, WA, USA. Proceedings... Seattle: [son],
  • Burakowiski, T., Wierzchon, T., 1998, "Surface engineering of metais - principies, equipment, technologies". Thermal Effects of Friction, Retrieved in November 25, 2010, from http://books.google.com/books?Id=MyMn8FwROC&printsec=frontcover&dq=friction+welding-+dissimilar
    » http://books.google.com/books?Id=MyMn8FwROC&printsec=frontcover&dq=friction+welding-+dissimilar
  • Chalmers, R. E., 2001, "The Friction Welding Advantage", p. 64-70, Retrieved in October 20, 2009, from: www.sme.org/manufacturingengineering
    » www.sme.org/manufacturingengineering
  • Fukumoto, S. et al, 1997, "Evaluation of Friction Weld Interface of Aluminum to Austenitic Stainless Steel Joint". Materials Science and Technology, Vol.13, No. 8, pp. 686.
  • Isshiki, Y. et al, 2008, "Prediction Method of Transient Temperature Distribution in Friction Welding of Two Similar Materials of Steel", The International Society of Offshore and Polar Engineers (ISOPE) Conference, pp. 261-267, Vancouver, BC, Canada
  • Kimura, M., et al, 2010, "Analysis Method of Friction Torque and Weld Interface Temperature during Friction Process of Steel Friction Welding", Journal of Solid Mechanics and Materials Engineering, Vol. 4, Nº3.
  • Kusçu, H. et al, 2007, "Experimental Determination of Temperature by the Friction Welding Method". Baltic Heat. Presented at the Baltic Heat Transfer Conference, St. Petersburg, Russia, Retrieved in December 3, 2010, from: http://dl.begehouse.com
    » http://dl.begehouse.com
  • Lee, W. B., 2003, "Effect of Friction Welding Parameters on Mechanical and Metallurgical Properties of Aluminum Alloy 5052 - A36 Steel Joint", Materials Science and Technology, Institute of Materials Minerais and Mining, Vol. 19, pp. 778.
  • Lindemann, et al, 2006, "Thermo-mechanical phenomena in the process of friction welding of corundum ceramics and aluminum", Bulletin of the Polish Academy of Sciences Technical Sciences, Vol. 54, N°.l, Institute of Mechanics and Design - Warsaw University of Technology, Poland.
  • Nikolaev, G., Olshansky, N., 1977, "Advanced Welding Process". Moscow: MIR.
  • Ochi, H., et al, 1998, "Friction Welding of Aluminum Alloyand Steel", International Journal of Offshore and Polar Engineering, Vol. 8, No. 2.
  • Sahin, M., 2004, "Joining with friction welding of high-speed Steel and medium carbon steel", Journal of Materials Processing Technology, Vol. 168, pp. 202-210, Retrieved in August 20, 2009, from: www.elsevier.com/locate/jmatprotec
    » www.elsevier.com/locate/jmatprotec
  • Sluzalec, A., 1990, "Thermal Effects in Friction Welding", Journal of Mechanical Science, Vol. 32, No. 6, pp. 467-478.
  • Zepeda, C.M., 2001, "The Effect of Interlayers on Dissimilar Friction Weld Proprierties", Thesis (Doctor in Applied Science), Graduate Department of Metallurgy & Materials Science, University of Toronto, Canada.
  • Vill, V.I., 1962, "Friction Welding of Metals", AWS, New York.
  • Ylbas, B. S. et al, 1994, "Friction Welding of St-Al and Al-Cu Materials", Journal of Materials Processing Technology, Vol. 49, pp. 431-443.

Publication Dates

  • Publication in this collection
    Jan-Mar 2012

History

  • Received
    11 July 2011
  • Accepted
    29 Dec 2011
Departamento de Ciência e Tecnologia Aeroespacial Instituto de Aeronáutica e Espaço. Praça Marechal do Ar Eduardo Gomes, 50. Vila das Acácias, CEP: 12 228-901, tel (55) 12 99162 5609 - São José dos Campos - SP - Brazil
E-mail: submission.jatm@gmail.com