SciELO - Scientific Electronic Library Online

 
vol.4 issue3A Review of Welding Technologies for Thermoplastic Composites in Aerospace ApplicationsBonded Joints Design Aided by Computational Tool author indexsubject indexarticles search
Home Pagealphabetic serial listing  

Services on Demand

Journal

Article

Indicators

Related links

Share


Journal of Aerospace Technology and Management

Print version ISSN 1984-9648On-line version ISSN 2175-9146

J. Aerosp. Technol. Manag. vol.4 no.3 São José dos Campos July/Sept. 2012

http://dx.doi.org/10.5028/jatm.2012.04032512 

ORIGINAL PAPERS

Reflectivity of Hybrid Microwave Absorbers Based on NiZn Ferrite and Carbon Black

Josiane de Castro Dias1 

Inácio Malmonge Martin1 

Mirabel Cerqueira Rezende2  * 

1Instituto Tecnológico de Aeronáutica - São José dos Campos/SP - Brazil

2Instituto de Aeronáutica e Espaço - São José dos Campos/SP - Brazil

Abstract:

This study had as main objective to show that the adequate combination of magnetic and dielectric particles can improve the radar absorbing materials performance. For this, formulations of polyurethane resin loaded with carbon black and NiZn ferrite, with general composition MFe2O4, where M = Ni, Zn or both elements, homogenized by conventional mechanical mixture, were prepared. Reflectivity measurements of different coating formulations applied on aluminum flat plates (l.0 ± 0.l mm-thickness) were performed using the Naval Research laboratory arch technique, in the X-band frequency range. X-ray diffraction and magnetic susceptibility evolution analyses of the tested ferrite showed that this magnetic additive presents different phases. Attenuation values of ~4 dB (~60% of the wave absorption) for the polyurethane/carbon black/ferrite formulation, 49/l/50 in wt.%, respectively, were found. This low attenuation values (~4 dB) is attributed to the presence of different phases in the NiZn ferrite, as shown by both the X-ray pattern and the magnetic susceptibility analyses, and also to the thickness and the additives concentration used. As main result, this study shows that the adequate combination of carbon black and NiZn ferrite improves the processed radar absorbing materials performance due to the adequate adjustment of the impedance matching, which favors the microwave absorber-electromagnetic wave interaction.

Keywords: Coatings; Radar absorbing materials; RAM; NiZn ferrites; Carbon black

Full text available only in PDF format.

REFERENCES

Afsar, M. N. et al., 1986, "The measurement of the properties of materials". Proceedings of the IEEE, Vol. 74, Nº. 1, pp. 183-199. [ Links ]

Balanis, C. A., 1997, "Advanced Engineering Eletromagnetics". New York: John Wiley Sons. [ Links ]

Cabot Co., USA, 2004, "Data Sheet: Vulcan XC72". http://www.cabot-corp.com/wcm/download/en-us/sb/VULCAN_XC72-English.pdf, in 07/13/2012. [ Links ]

Cho, S.B. et al., 1996, "Relationship betwen magnetics properties and microwave-absorbing characteristics of NiZnCo ferrites composites". Journal of Materials Science, Vol. 31, pp. 4719-4722. [ Links ]

Cullity, B. D., 1972, "Introduction to Magnetic Materials". Addison-Wesley Publishing Company, INC, United State of America. [ Links ]

Dias, J. C., 2000, "Obtenção de revestimentos absorvedores de radiação eletromagnética (2-20 GHz) aplicados no setor aeronáutico", PhD Thesis, Instituto Tecnológico de Aeronáutica, São José dos Campos, SP, Brazil. [ Links ]

Dias, J. C. et al., 2005, "Refletividade de Fótons Microondas por Tintas Poliuretânicas Aditadas com Ferritas de NiZn e MnZn". Revista Física Aplicada e Instrumentação, Vol. 18, Nº. 1, pp. 24-33. [ Links ]

Faez, R. et al., 2005, "Microwave Absorbing Coatings Based on a Blend of Nitrile Rubber, EPDM Rubber and Polyaniline". Polymer Bulletin, Vol. 55, Nº. 1, pp. 299-307. [ Links ]

Folgueras, L. C. et al., 2007, "Dielectric microwave absorbing material processed by impregnantion of carbon fiber fabric with polyaniline". Materials Research, Vol. 10, pp. 95-99. [ Links ]

Gama, A. M. and Rezende, M. C., 2010, "Complex permeability and permittivity variation of carbonyl iron rubber in the frequency range of 2 to 18 GHz". Journal of Aerospace Technology and Management, Vol. 2, Nº 1, pp. 59-62. [ Links ]

Gama, A.M. et al., 2011, "Dependence of microwave absorption properties on ferrite volume fraction in MnZn ferrite/rubber microwave absorbing materials". Journal of Magnetism and Magnetic Materials, Vol. 323, pp. 2782-2785. [ Links ]

JCPDS, 2008, International Centre Diffraction Date, PCPDFWIN v. 1.30, Cards for NiFe2O4, Nickel Iron Oxide, ZnFe2O4, Zinc Iron Oxide and NiZnFe2O4, Nickel Zinc Iron Oxide, American Ceramic Society, USA. [ Links ]

Knott, E.F. et al., 1993, "Radar Cross Section". 2ª Edition, Artech House, Inc., Norwood, USA. [ Links ]

Lee, S. M., 1991, "International Encyclopedial of Composites". New York: VHC Publishers, Vol. 6, pp. 404-430. [ Links ]

Marcel Dekker Inc., 1990, "Handbook of Ceramics and Composites", Nicholas P. Cheremisinoff, Vol. 1, New York. [ Links ]

Martins, C. R. et al., 2006, "Reactive processing and evaluation of butadiene-styrene copolymer/polyaniline conductive blends". Journal of Applied Polymer Science, Vol. 100, pp. 681-685. [ Links ]

Pinto, S. S. and Rezende, M. C., 2012, "Estudo da aplicação da poli(o-metoxianilina) e de seus compósitos com negro de fumo no processamento de absorvedores de microondas". Polímeros, Ciência e Tecnologia. Vol. XXII, Nº. 2, pp. in pressLinks ]

Rezende, M.C. et al., 2001, "Microwave properties of EPDM/PAni-DBSA blends". Synthetic Metals, Vol. 119, pp. 435-436. [ Links ]

Rezende, M.C. et al., 2002, "Radar cross section measurements (8-12 GHz) of magnetic and dielectric microwave absorbing thin sheets". Revista de Física Aplicada e Instrumentação, Vol. 1, Nº. 1, pp. 1-10. [ Links ]

Rezende, M. C., et al., 2004, "Microwave absorption properties of a conductive thermoplastic blend based on polyaniline". Polymer Bulletin, Vol. 51, pp. 321-326. [ Links ]

Rezende, M. C., et al., 2003, "Medidas de refletividade de materiais absorvedores de radiação eletromagnética usando as técnicas RCS e NRL". Revista Física Aplicada e Instrumentação, Vol. 16, Nº. 1, pp. 30-36. [ Links ]

Smith, F.C. et al., 1994, "Methodology for accurate free-space characterization of radar absorbing materials". IEE Proc. Sc. Meas. Technol., Vol. 4, Nº 6, pp. 538-546. [ Links ]

Soto-Oviedo, M.A. et al., 2006, "Antiestatic coating and electromagnetic shielding properties of a hybrid material based on polyaniline/organoclay nanocomposite and EPDM rubber". Synthetic Metals, Vol. 156, pp. 1249-1255. [ Links ]

Valenzuela, R., 1994, "Magnetic Ceramics (series Chemistry of solid materials)", University Press, New York. [ Links ]

Verwey, E. J. W. and Helmann, E. L., 1947, "Physical properties and cation arragemente of oxides with spinel estructures. I. cation arrangement in spinels". J. Chem. Phys., Vol. 15, Nº. 4, pp. 174-187. [ Links ]

Received: April 24, 2012; Accepted: July 04, 2012

*author for correspondence: mirabelmcr@iae.cta.br. Pç. Mal. Eduardo Gomes, 50. CEP: 12.228-901 - São José dos Campos/SP - Brazil

Creative Commons License This is an Open Access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.