Acessibilidade / Reportar erro
Eclética Química, Volume: 35, Número: 2, Publicado: 2010
  • Titrimetric assay of lisinopril in aqueous and non-aqueous media

    Basavaiah, K.; Tharpa, K.; Vinay, K.B.

    Resumo em Inglês:

    Four simple titrimetric procedures are described for the determination of lisinopril (LNP) in bulk and in pharmaceuticals based on the neutralization of basic-amino and acidic carboxylic acid groups present in LNP. Method A is based on the neutralization of basic amino groups using perchloric acid as titrant in anhydrous acetic acid medium. Method B, method C and method D are based on neutralization of carboxylic acid group using NaOH, sodium methoxide and methanolic KOH, as titrants, respectively. Method A is applicable over 2.0-20.0 mg range and the calculations are based in the molar ratio of 1:2 (LNP:HClO4). Method B, method C and method D are applicable over 2.0-20.0 mg, 1.0-10.0 mg and 5.0-15.0 mg range, respectively, and their respective molar ratios are 1:1 (LNP:NaOH), 1:2 (LNP:CH3ONa) and 1:1 (LNP:KOH). Intraday and inter day accuracy and precision of the methods were evaluated and the results showed intra- and inter-day precision less than 2.7% (RSD), and accuracy of < 2.5 % (RE). The developed methods were applied to determine LNP in tablets and the results were validated statistically by comparing the results with those of the reference method by applying the Student's t-test and F-test. The accuracy was further ascertained by recovery studies via standard addition technique. No interferences from common tablet exipients was observed.
  • Determination of patulin in apple juice by HPLC using a simple and fast sample preparation method

    Sargenti, Silvia R.; Almeida, Carlos A. A.

    Resumo em Português:

    O objetivo deste trabalho foi desenvolver um método simples e rápido para preparação de amostras para análise de patulina em sucos de maçã sem "clean-up" prévio. Este método combina os métodos de extração líquida com o ultrassom e foi utilizado para a determinação de patulina em 37 amostras de suco de maçã disponíveis no mercado do sul do Brasil. Os parâmetros estatísticos para validação do método foram obtidos através de fortificação de suco de maçã, obtido no mercado local, em cinco níveis de concentração de patulina e realizadas em triplicatas. O coeficiente de variação para a repetibilidade no nível de fortificação de 20,70 µg.L-1 foi de 3,53 % e a recuperação de 94,63 %. O coeficiente de correlação foi de 0,9996 e este valor está de acordo com os requisitos de linearidade de um método analítico. O limite de detecção obtido foi de 0,21 µg.L-1 e o limite de quantificação de 0,7 µg.L-1. Somente três das amostras analisadas tiveram valores superiores ao limite de 50,00 µg.L-1 recomendado pela Organização Mundial da Saúde.

    Resumo em Inglês:

    The goal of this work was to develop a simple and rapid preparation method for patulin analysis in apple juice without previous clean-up. This method combined sonication and liquid extraction techniques and was used for determination of patulin in 37 commercial apple juices available on the market in the South of Brazil. The method performance characteristics were determined using a sample obtained in a local market fortified at five concentration levels of patulin and done in triplicates. The coefficient of variation for repeatability at the fortification level of 20.70µg.L-1 was 3.53 % and the recovery 94.63 %, respectively. The correlation coefficient was 0.9996 and agrees with the requirements for a linear analytical method value. The detection limit was 0.21µg.L-1 and the quantification limit 0.70 µg.L-1. Only three of the analyzed samples were upper the allowed level of 50.00 µg.L-1 recommended for the World Health Organization.
  • Viscometric investigations and molecular interactions of some derivatives of 5-substituted indole dihydropyrimidines in mixed organic solvents

    Heda, L. C.; Sharma, Rashmi; Mosalpuri, S. R.; Chaudhari, Pramod B.

    Resumo em Inglês:

    Colloid chemical behavior of indole dihydropyrimidines in non-aqueous solvent mixture benzene-methanol of varying composition has been investigated by viscometric measurements at 303K± 0.1. The viscosity of the system increases with the increase in concentration. The Trend Change Point (TCP) values have been determined by intersection of two straight lines, which are found to be dependent on the composition of solvent mixtures. The study confirms that the nature of synthesized compounds agglomerate formed below and above 50% benzene concentration is quite different. The viscometric data have been analyzed in terms of Einstein, Vand, Moulik and Jones-Dole equations. These well known equations have been successfully applied to explain the results of viscosity measurements and the viscometric parameters show that the behavior of compound changes in the proximity of 50% benzene concentration.
  • A pH optode based on thymol blue: application to determination of CO2 using flow injection analysis system

    Sotomayor, M.D.P.T.; Raimundo Jr, I.M.; Rohwedder, J.J. R.; Oliveira Neto, G.

    Resumo em Português:

    Este trabalho mostra a construção de um optodo baseado no indicador ácido - base azul de timol (TB) e sua aplicação como detector de um sistema para análise por injeção em fluxo (FIA) para determinação de CO2. O indicador foi quimicamente imobilizado na superfície de um feixe bifurcado de fibras ópticas de vidro, usando silanização em meio orgânico. No sistema FIA, amostras de carbonato ou bicarbonato são injetadas em uma solução tampão carregadora, e a seguir são misturadas com solução de ácido fosfórico para gerar CO2, o qual se difunde através de uma membrana de PTFE, para ser coletado em um fluido carregador aceptor, o qual é bombeado em direção à cela de detecção, na qual encontra-se o optodo. O sistema proposto apresenta duas faixas lineares de resposta, entre 1,0 x 10-3 e 1,0 x 10-2 mol l-1, e entre 2,0 x 10-2 e 0,10 mol l-1. A freqüência de amostragem foi de 11 amostras h-1, com boa repetibilidade (R.S.D < 4 %, n = 10). Sob condições em fluxo o tempo de vida do optodo foi de 170 h. O sistema proposto foi aplicado na análise de águas minerais comerciais, e os resultados obtidos na determinação de bicarbonato foram similares daqueles obtidos pelo método potenciométrico, a um nível de confiança de 95%.

    Resumo em Inglês:

    An optode based on thymol blue (TB), an acid-based indicator, has been constructed and evaluated as a detector in FIA system for CO2 determination. The dye was chemically immobilised on the surface of a bifurcated glass optical fibre bundle, using silanisation in organic media. In FIA system, hydrogen carbonate or carbonate samples are injected in a buffer carrier solution, and then are mixed with phosphoric acid solution to generate CO2, which diffuses through a PTFE membrane, in order to be collected in an acceptor carrier fluid, pumped towards to detection cell, in which the optode was adapted. The proposed system presents two linear response ranges, from 1.0 x 10-3 to 1.0 x 10-2 mol l-1, and from 2.0 x 10-2 to 0.10 mol l-1. The sampling frequency was 11 sample h-1, with good repeatability (R.S.D < 4 %, n = 10). In flow conditions the optode lifetime was 170 h. The system was applied in the analysis of commercial mineral water and the results obtained in the hydrogen carbonate determination did not differ significantly from those obtained by potentiometry, at a confidence level of 95 %.
  • Comparação de técnicas analíticas para a extração de potássio de amostras de tecido vegetal com água e soluções ácidas concentrada e diluída

    Bernardi, Alberto C. C.; Oka, Sílvia Harumi; Souza, Gilberto B. de

    Resumo em Português:

    O aprimoramento dos métodos analíticos faz com que a busca por novas tecnologias rápidas, exatas e de custo reduzido estejam constantemente sendo revistas e avaliadas. O objetivo deste trabalho foi comparar três formas de extração de K (decomposição nítro-perclórica, extração com água e extração com solução diluída de HCl) de amostras da parte aérea de capim-tanzânia (Panicum maximum cv. Tanzânia) e de alfafa (Medicago sativa cv. Crioula). Os métodos de extração de K de amostras de tecido vegetal de capim-tanzânia e alfafa com solução ácida diluída ou com água apresentaram-se equivalentes ao método tradicional da decomposição nítro-perclórica e podem substituí-lo.

    Resumo em Inglês:

    The improvement of analytical methods makes the search for new technologies fast, accurate and low cost are constantly being reviewed and evaluated. The main objective of this research was to compare three forms of extraction of potassium (nitro-perchloric decomposition, extraction with water and extraction with diluted solution of HCl) of plant tissues samples of Tanzania grass (Panicum maximum cv. Tanzania) and alfalfa (Medicago sativa cv. Crioula). The methods of K extraction of Tanzania grass and alfalfa plant tissue samples in acid solution or diluted with water were equivalent to the traditional method of nitro-perchloric decomposition and can replace it.
  • Desenvolvimento de um método analítico rápido e eficiente para a determinação de corticosteróides plasmáticos por injeção direta em coluna cromatográfica ISRP-C18 por CLAE

    Toledo-Pinto, E.A.; Menezes, M.L.; Pereira, O.C.M.

    Resumo em Português:

    O presente trabalho teve como objetivo o desenvolvimento de um método analítico simples, rápido e eficiente para a determinação de corticosteróides (cortisona, corticosterona, acetato de hidrocortisona e acetato de dexametasona) em amostras sangüíneas de ratos empregando um sistema isocrático de cromatografia líquida de alta eficiência (CLAE) com detecção ultravioleta. O método envolveu a injeção direta da amostra sangüínea em uma coluna cromatográfica com superfície interna de fase reversa (ISRP-C18), empregando a fase móvel composta por tampão fosfato pH 4,0: acetonitrila (65:35 v/v). A detecção dos analitos foi obtida, através de um detector de ultravioleta de comprimento de onda variável (Varian Modelo 2550) ajustado em 240 nm e um integrador SP 4400 Chromaject (Varian Associates, Inc, Sunnyvale, CA, USA). A extração do analito resultou em valores de recuperação entre 90% e 108%, e coeficiente de variação entre 1,1% a 2,5%. Os limites de detecção e quantificação do método foram de 0,02 e 0,04 µg mL-1, respectivamente. Assim, o método analítico proposto possibilitou a injeção direta (on-line) da amostra sem tratamento prévio apresentando também várias vantagens, tais como: rapidez, exatidão, precisão e especificidade.

    Resumo em Inglês:

    The present work had as aim the development of simple an analytical method, fast efficient and the determination of corticosteroids (cortisone, corticosterone, acetate of hidrocortisone and acetate of dexametasone) in sanguine samples of rats using an isocratic system of liquid chromatography of high efficiency (CLAE) with ultraviolet detention. The method involved direct injection of sanguine sample in a chromatographic column with internal surface of phase reverse (ISRP-C18), using the composed mobile phase for drain plug phosphate pH 4,0: acetonitrile (65:35 v/v). The detention the analytes was obtained using an ultraviolet detector of changeable wave length (Varian Model 2550) adjusted in 240 nm and a 4400 integrator SP Chromaject (Varian Associates, Inc., Sunnyvale, CA, USA). The extraction of the analyte resulted in recovery values between 90% and 108%, and variation coefficient enter 1,1% and 2.5%. The detention and quantification limits of the method were 0,02 and 0,04 µg mL-1, respectively. In conclusion, the analytical method possible the direct injection (on-line) of the sample without previous treatment also presenting some advantages, such as: fast, exactness, precision and specific.
  • Construção de um calorímetro de baixo custo para a determinação de entalpia de neutralização

    Assumpção, M. H. M. T.; Wolf, L. D.; Bonifácio, V. G.; Fatibello-Filho, O.

    Resumo em Português:

    Neste artigo descreve-se a construção de um calorímetro simples, utilizando materiais de fácil aquisição, para a determinação de entalpia de neutralização (pressão constante) de reações ácido-base. Foram utilizadas para o desenvolvimento do experimento soluções de ácidos e bases fortes e fracos, além de termômetro e recipiente de poliestireno expandido (isopor) para a medida e manutenção da temperatura, respectivamente. Com este experimento, foi então possível determinar a entalpia de neutralização (ΔH) de algumas reações de neutralização e compará-las com o valor mais aceito de - 55,84 kJ mol -1, a 25 ºC [1].

    Resumo em Inglês:

    In this article the construction of a simple calorimeter (with easily acquired materials) for the determination of the enthalpy of neutralization at constant pressure of acid-base reactions is described. Solutions of weak and strong acids and bases, one thermometer, and one expanded-polystyrene (Styrofoam) container were used in the development of the experiment. With this calorimeter, it was possible to determine the enthalpy of neutralization of reactions and compare the obtained values with the most accepted one of - 55.84 kJ mol-1, at 25 ° C [1].
  • Soares, Itânia Pinheiro; Rezende, Thais F.; Fortes, Isabel Cristina P.

    Resumo em Inglês:

    The aim of this present work was to provide a more fast, simple and less expensive to analyze sulfur content in diesel samples than by the standard methods currently used. Thus, samples of diesel fuel with sulfur concentrations varying from 400 and 2500 mgkg-1 were analyzed by two methodologies: X-ray fluorescence, according to ASTM D4294 and by Fourier transform infrared spectrometry (FTIR). The spectral data obtained from FTIR were used to build multivariate calibration models by partial least squares (PLS). Four models were built in three different ways: 1) a model using the full spectra (665 to 4000 cm-1), 2) two models using some specific spectrum regions and 3) a model with variable selected by classic method of variable selection stepwise. The model obtained by variable selection stepwise and the model built with region spectra between 665 and 856 cm-1 and 1145 and 2717 cm-1 showed better results in the determination of sulfur content.
  • Determination of Alkalinity and dissociation constants of high salinity waters: use of F5BC titration function

    Cavalcanti, B.F; Agostinho, L.C.L; Nascimento, L

    Resumo em Português:

    Medições de parâmetros expressos em termos de espécies carbônicas tais como Alcalinidade e Acidez de águas Salinas não analisam a influencia de parâmetros externos tais como Concentração de Espécies Carbônicas livre e associada, formação de pares iônicos e Potencial de Residual de Junção Líquida em medições de pH. Este artigo mostra o desenvolvimento da função titulométrica F5BC com base nas titulações desenvolvidas por Gran (1952) para o sistema carbonatado de águas naturais. Para uso prático, amostras de água salina do açude de Pocinhos, PB foram submetidas à titulação e análise de regressão linear. Os resultados mostraram que a função F5BC compreende a determinação das funções tipo Gran F1x e F2x, respectivamente, para a obtenção de Alcalinidade e de Acidez sem conhecer "a priori" o ponto final da titulação. A função F5BC permite também a determinação da Primeira e da Segunda Constante Aparente de Dissociação do sistema carbonatado de águas salinas e de alta força iônica.

    Resumo em Inglês:

    Measurements of parameters expressed in terms of carbonic species such as Alkalinity and Acidity of saline waters do not analyze the influence of external parameters to the titration such as Total free and associated Carbonic Species Concentration, activity coefficient, ion pairing formation and Residual Liquid Junction Potential in pH measurements. This paper shows the development of F5BC titration function based on the titrations developed by Gran (1952) for the carbonate system of natural waters. For practical use, samples of saline waters from Pocinhos reservoir in Paraiba were submitted to titration and linear regression analysis. Results showed that F5BC involves F1x and F2x Gran functions determination, respectively, for Alkalinity and Acidity calculations without knowing "a priori" the endpoint of the titration. F5BC also allows the determination of the First and Second Apparent Dissociation Constant of the carbonate system of saline and high ionic strength waters.
  • The physico-chemical properties of 2-methoxyphenoxyacetates of Mn(II), Co(II), Ni(II) and Cu(II)

    Ferenc, W.; Bernat, M.; Sarzyński, J.

    Resumo em Inglês:

    The complexes of 2-methoxyhenoxyacetates of Mn(II), Co(II), Ni(II) and Cu(II)with the general formula: M(C9H9O4)3·4H2O, where M(II) = Mn, Co, Ni and Cu have been synthesized and characterized by elemental analysis, IR spectroscopy, magnetic and thermogravimetric studies and also X-ray diffraction measurements. The complexes have colours typical for M(II) ions (Mn(II) - a pale pink, Co(II) - pink, Ni(II) - green, and Cu(II) - blue). The carboxylate group binds as monodentate and bidentate ligands. On heating to 1273K in air the complexes decompose in the same way. At first, they dehydrate in one step to anhydrous salts, that next decompose to the oxides of respective metals with the intermediate formation of the oxycarbonates. Their solubility in water at 293K is of the order of 10-5 mol·dm-3. The magnetic moments of analysed complexes were determined in the range of 76-303K. The results reveal them to be high-spin complexes of weak ligand fields.
Fundação Editora da Universidade Estadual Paulista Júlio de Mesquita Filho - UNESP Instituto de Química / UNESP, 14801-970 Araraquara SP Brazil, Tel.: +55 16 3301-9636/3301-9631 - São Paulo - SP - Brazil
E-mail: ecletica@iq.unesp.br