Acessibilidade / Reportar erro
Polímeros, Volume: 22, Número: 4, Publicado: 2012
  • Editorial Seção Editorial

    Frollini, Elisabete
  • Investigação do processo de absorção de água de hidrogéis de polissacarídeo: efeito da carga iônica, presença de sais, concentrações de monômero e polissacarídeo Seção Técnica

    Bortolin, Adriel; Aouada, Fauze A.; Longo, Elson; Mattoso, Luiz H. C.

    Resumo em Português:

    Neste trabalho foi reportada a caracterização de hidrogéis constituídos por metilcelulose (MC) e poliacrilamida (PAAm) preparados pelo processo de reticulação cruzada. As propriedades espectroscópicas e morfológicas foram investigadas por espectroscopia no infravermelho com transformada de Fourier e microscopia eletrônica de varredura, respectivamente. O efeito da carga iônica, presença de sais, concentrações de monômero AAm e polissacarídeo MC na absorção de água e nas propriedades cinéticas dos hidrogéis foi detalhadamente investigado. Os resultados indicaram que o decréscimo da concentração de MC ou aumento da concentração de AAm, carga iônica do contra-íon do sal de cloreto e a presença de fertilizante no meio externo de intumescimento provocaram diminuição significativa na absorção de água dos hidrogéis. O mecanismo de absorção de água dos hidrogéis de PAAm-MC em água seguiu o modelo de difusão Fickiana; já o mecanismo dos hidrogéis intumescidos em sais (cloreto ou fertilizante) seguiu o modelo de transporte anômalo. Pela alta e rápida absorção de água, as matrizes porosas e tridimensionais compostas por PAAm e MC podem em potencial ser aplicadas na agricultura como veículos carreadores.

    Resumo em Inglês:

    This work reported the characterization of hydrogels constituted by methylcellulose (MC) entrapped in polyacrylamide (PAAm) network prepared by cross-linking polymerization (gelling process). Spectroscopic and morphologic properties were investigated using Fourier transform infrared spectroscopy and scanning electron microscopy, respectively. Effects of AAm, MC contents, ionic charge of salt counter-ions (NaCl, KCl, NH4Cl, CaCl2, MnCl2, MgCl2, and AlCl3), and fertilizers [(NH4)2SO4 and KH2PO4] on kinetic and hydrophilic (swelling degree) properties were investigated in detail. By decreasing the MC content or by increasing acrylamide content, there was a pronounced decrease in water uptake by the hydrogels. The increase in counter-ion X-Cl salt and the presence of fertilizer on the external swelling medium also provoked a decrease in water uptake. The water uptake mechanism of PAAm-MC hydrogels swollen in water followed the Fickian diffusion, while the mechanisms of hydrogels swollen in salt or fertilizer aqueous media followed the anomalous transport process. With their fast and high water absorption, the porous, three-dimensional matrices containing PAAm and MC are promising for agriculture as carrier vehicles.
  • Sistemas inteligentes de embalagens utilizando filmes de quitosana como indicador colorimétrico de temperatura Seção Técnica

    Maciel, Vinícius B. V.; Franco, Telma T.; Yoshida, Cristiana M. P.

    Resumo em Português:

    Clorofila, um pigmento natural termossensível, foi incorporado à matriz de filmes de quitosana visando a obter sistemas inteligentes de indicação de variação de temperatura. A quitosana é um polímero biodegradável que forma filmes flexíveis com eficiente barreira ao oxigênio, podendo ser alternativa ao uso de polímeros sintéticos. Clorofila foi adicionada (0,25 g/100 g) à suspensão de quitosana (2,00 g/100 g) formando filmes inteligentes de quitosana (FIQ). Os efeitos da temperatura (10 °C a 50 °C) e luminosidade (0 a 1000 lx) foram estudados utilizando um planejamento experimental, avaliando os parâmetros de cor (L*, a*, b*) e propriedades mecânicas. As suspensões de quitosana contendo clorofila foram aplicadas como revestimento em superfície de papel cartão formando o sistema de material flexível filme-papel cartão (S-FP), reduzindo significativamente o tempo de secagem. Os filmes caracterizaram-se pela homogeneidade, flexibilidade, coloração esverdeada e fácil manuseio. A variação de cor foi visualmente observada no sistema S-FP, alterando irreversivelmente de verde para amarelo quando submetido a temperaturas acima de 50 °C, independentemente da luminosidade. Desta forma, o sistema proposto tem potencial de aplicação como indicador colorimétrico de temperatura na faixa de 50 °C a 75 °C, com a vantagem de simples fabricação, biodegradabilidade e uso de materiais seguros para aplicação em contato direto com alimentos e fármacos, além do baixo custo.

    Resumo em Inglês:

    Chlorophyll was incorporated into chitosan films, forming intelligent systems able to detect variations in temperature. Chitosan is a biodegradable polymer that forms flexible, resistant films with an efficient oxygen barrier. Chlorophyll was added (0.25 g/100 g) into chitosan suspension (2.00 g/100 g) and intelligent films (FIQ) were cast. The effects of temperature (10 °C to 50 °C) and luminosity (0 to 1000 lx) on the films were studied using an experimental design with two variables, analyzing the color parameters L*, a*, b* and mechanical properties. The films were characterized according to their homogeneity, flexibility, color and handling. Chitosan suspensions containing chlorophyll were also applied as coating on the surface of pieces of card-paper, forming a card paper film system (S-FP). By visual inspection we observed the color of the S-FP changing irreversibly from green to yellow when the temperature was above 50 °C. Therefore, the S-FP system can potentially be used as a colorimetric indicator for the 50 °C to 70 °C range, being advantageous owing to the ease of fabrication, biodegradability, safe use for food and low cost.
  • Estudo da aplicação da poli(o-metoxianilina) e de seus compósitos com negro de fumo no processamento de absorvedores de micro-ondas Seção Técnica

    Pinto, Simone de S.; Rezende, Mirabel C.

    Resumo em Português:

    Este estudo apresenta resultados com materiais absorvedores de radiação eletromagnética, MARE, à base de poli(o-metoxianilina) (POMA) e de seus compósitos com negro de fumo (NF) (NF/POMA). A condutividade elétrica dos compósitos NF/POMA foi significativamente maior (0,23-80 S.cm-1) que para a POMA (0,017 S.cm-1). Medidas de atenuação da radiação eletromagnética de formulações com esses aditivos poliméricos em resina epóxi foram realizadas na faixa de 8,2 a 12,4 GHz. Resultados de refletividade mostram que as composições com o compósito condutivo NF-10%/POMA apresentam os melhores valores de atenuação da radiação eletromagnética (até 99,5% em 11,7 GHz).

    Resumo em Inglês:

    This study deals with the production of radar absorbing materials (RAM) based on poly(o-methoxyaniline) (POMA) and its conductive composites with carbon black (CB) (CB/POMA). The electrical conductivity of the CB/POMA composite was significantly higher (0.23-80 S.cm-1) than for POMA (0.017 S.cm-1). The attenuation of the electromagnetic radiation in the range between 8 and 12 GHz was highest for CB/POMA-conductive composites in epoxy resin, reaching up to 99.5% at 11.7 GHz.
  • Preparação e caracterização reológica de nanocompósitos de poli(cloreto de vinila): plastisol com nano-argila Seção Técnica

    Bettio, Paola P. S. de B.; Pessan, Luiz A.

    Resumo em Português:

    Neste trabalho foi estudada a influência da adição de nano-argila nas propriedades reológicas de suspensões de plastisol de poli(cloreto de vinila). Foram utilizados dois tipos de nano-argila, montmorilonita sódica e a organicamente modificada com sal quaternário de amônio, contemplando a avaliação tanto do método de inchamento da argila, quanto da influência da concentração. A nano-argila, na concentração de 2,5, 5, e 10 pcr, foi previamente inchada em plastificante, sob ação de cisalhamento e temperatura. Três tipos de plastificantes foram utilizados, diisobutil ftalato, diisononil ftalato e éster poliglicólico. Experimentos sem o inchamento prévio da argila também foram realizados para validação de sua influência. O plastisol foi obtido com a mistura da nano-argila com o PVC, plastificante diisononil ftalato e demais aditivos, em misturador planetário. A análise dos dados com método estatístico propiciou afirmar que tanto o tipo de argila quanto sua concentração foram determinantes na elevação da viscosidade da pasta, não tendo sido comprovada eficácia do inchamento prévio da argila.

    Resumo em Inglês:

    The influence from adding nanoclay on the properties of a poly(vinyl chloride) plastisol microsuspension was studied. Two types of nanoclay were used, namely sodium montmorillonite and organophilic modified with quaternary ammonium salt, with both the method of clay swelling and clay concentration. Nanoclays at concentrations of 2.5, 5 and 10 phr, were previously swollen in the plasticizer under shear and temperature. Three plasticizers were used, viz. diisobutyl phthalate, diisononyl phthalate and ester polyglycolic. The plastisol was obtained by mixing the nanoclay with PVC, plasticizer diisononyl phthalate and other additives in a planetary mixer. Data analysis was performed with a statistical method, which allowed us to verify that the type of clay and its concentration affect the plastisol viscosity. The clay swelling method did not show significant influence on the plastisol properties.
  • Efeito do tratamento alcalino de fibras de juta no comportamento mecânico de compósitos de matriz epóxi Seção Técnica

    Pires, Eduardo N.; Merlini, Claudia; Al-Qureshi, Hazim Ali; Salmória, Gean V.; Barra, Guilherme M. O.

    Resumo em Português:

    Neste trabalho foi avaliada a influência do tratamento químico de fibras vegetais nas propriedades mecânicas e dinâmico-mecânicas de resina epóxi reforçada com tecidos de fibras de juta. As fibras foram modificadas a partir de solução de hidróxido de sódio, e caracterizadas por microscopia eletrônica de varredura (MEV), espectrometria no infravermelho com transformada de Fourier (FTIR) e resistência à tração. As análises de FTIR e MEV evidenciaram, respectivamente, que o tratamento alcalino promoveu a remoção parcial da hemicelulose e modificou a morfologia das fibras de juta. Amostras dos compósitos com fibras tratadas e não tratadas foram confeccionadas a partir da laminação manual seguida da moldagem por compressão. Compósitos com fibras tratadas apresentaram propriedades mecânicas e módulo de armazenamento maiores do que as da resina epóxi sem reforço e compósitos com fibras sem tratamento. As micrografias de microscopia eletrônica de varredura (MEV) revelaram que compósitos com fibras tratadas possuem menor quantidade de vazios e menor quantidade de pull-out, sugerindo maior adesão com a matriz polimérica do que os compósitos com fibras sem tratamento.

    Resumo em Inglês:

    This study was aimed at evaluating the efficiency of chemical treatment on the dynamic mechanical and mechanical properties of composite materials with jute fibers and epoxy matrix resin. The surfaces of the jute fibers were modified by contact with sodium hydroxide solutions, and characterized through scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR) and tensile strength testing. The FTIR and SEM analysis evidenced that the alkaline treatment promoted removal of the hemicellulose and modification in the morphology of the jute fibers, respectively. Polymeric composites with untreated and treated jute fiber were prepared through hand lay-up process followed by compression molding. The treated jute fiber composites displayed higher mechanical properties and storage modulus values than the epoxy resin and untreated fiber composites. The scanning electron micrographs (SEM) revealed that treated jute fiber composites have less voids and pull-out, suggesting a better adhesion with the polymeric matrix than untreated fiber composites.
  • Efeito da adição de material vegetal (fibra da castanha de cutia) e polímero (SBS) nas propriedades do ligante asfáltico (CAP 50/70) Seção Técnica

    Cunha, Tayana M. F.; Correia, José C.; Frota, Consuelo A.; Chaar, Satomi M.; Couceiro, Paulo R. C.

    Resumo em Português:

    Tendo em vista a necessidade do mercado brasileiro por ligantes que minimizem a prematura falência estrutural dos revestimentos nas vias urbanas, a modificação do cimento asfáltico de petróleo (CAP 50/70) constitui uma excelente opção tecnológica. Nesta pesquisa utilizou-se 2% p/p do copolímero de estireno-butadieno-estireno (SBS) e 2% p/p de fibra natural da casca dos frutos de Couepia edulis (Prance), conhecida como castanha de cutia, material vegetal com característica de reforço e biodisponibilidade na região Amazônica. Os efeitos oxidativos e térmicos, bem como as características físicas dos materiais asfálticos modificados, foram estudados e comparados ao ligante convencional, utilizando-se ensaios estabelecidos pela Agência Nacional de Petróleo, Gás Natural e Biocombustíveis (ANP) e análise térmica - termogravimetria (TG), a fim de determinar as propriedades de degradação e estabilização térmica. Os resultados para os ligantes modificados, confrontados ao ligante tradicional, apresentaram: maior resistência ao envelhecimento, melhorias evidenciadas pelo aumento da consistência, ponto de amolecimento, além da excelente estabilidade térmica em toda faixa de temperatura de utilização (10 ºC a 80 ºC) e aplicação (130 ºC a 170 ºC) dos cimentos asfálticos de petróleo, fornecendo uma opção ao pavimento regional.

    Resumo em Inglês:

    There is a need in the Brazilian market for asphalt binders that minimize premature structural failure of the coatings on urban roads, and the modification of asphalt cement oil (CAP 50/70) is an excellent option. In this research we used 2% w/w of the styrene - butadiene-styrene (SBS) copolymer and 2% w/w of natural fiber from Couepia edulis (Prance), known as cutia chesnut, which is a plant from the Amazon region with strengthening properties. The oxidative and thermal effects, as well as the physical characteristics of the asphalt modified materials, were studied and compared to the conventional binder, using the tests set by the National Agency of Petroleum, Natural Gas and Biofuels (ANP) and thermal analysis - thermogravimetry (TG) to determine the properties of thermal degradation and stabilization. In comparison with the traditional binders, the modified ones exhibited increased resistance to aging, evidenced by an increase in consistency, softening point and excellent thermal stability in the whole range of operating (10 ºC to 80 ºC ) and application (130 ºC to 170 ºC) temperatures for the asphalt cement oil, providing an option for regional pavements.
  • Um material alternativo à base de SBS para substituir a guta percha no tratamento endodôntico Seção Técnica

    Conceição, Bárbara M. da; Visconte, Leila L. Y.; Furtado, Cristina R. G.

    Resumo em Português:

    A guta percha é um dos materiais obturadores mais usados nos tratamentos endodônticos. Este polímero é obtido de poucas espécies de árvores do arquipélago malaio. Sua grande desvantagem é que pode degradar com o tempo devido ao envelhecimento e esta degradação pode ser potencializada com aquecimento durante a obturação. Neste trabalho foram desenvolvidos cones de tratamento endodôntico à base de SBS. Os estudos clínicos mostraram que este novo material pode ser utilizado nas técnicas de obturação a frio e a quente. No caso de um retratamento, foram empregados os mesmos solventes para a guta percha. Porém, a grande vantagem é que estes cones de SBS, por apresentarem uma resistência à abrasão inferior à dos cones de guta percha, são mais facilmente removidos da cavidade do dente, preservando, assim, as paredes do mesmo. As curvas de TGA mostraram que o compósito de SBS apresenta temperatura de degradação superior à da guta percha, indicando um material mais estável à temperatura, característica importante para o processo de obturação do dente.

    Resumo em Inglês:

    Gutta percha is the most widely used dental material for root canal fillings and has been used for over 100 years. It is obtained from a few species of trees in the Malaio archipelago. The disadvantage of gutta percha is its degradability upon aging which can be enhanced when heat is used during obturation. In this work, dental cones based on SBS were developed. Clinical results showed that the new material can be used in warm as well as in cold obturation techniques. In the case of retreatment the new material was found to be easier and faster to be removed from the canal, thus preserving the teeth walls. The same behavior was observed when a solvent was used. Furthermore, the new material exhibited a higher degradation temperature which is an indication of its higher temperature stability, an important characteristic during the obturation process.
  • Caracterização estrutural de nanocompósitos de blendas HDPE/LLDPE e OMMT obtidos por diferentes sequências de mistura Seção Técnica

    Passador, Fabio R.; Ruvolo Filho, Adhemar C.; Pessan, Luiz A.

    Resumo em Português:

    Nanocompósitos de blendas de polietileno de alta densidade (HDPE) com polietileno linear de baixa densidade (LLDPE) e OMMT (montmorilonita organofílica) foram preparados em um reômetro de torque, utilizando-se como sistema compatibilizante uma mistura de HDPE-g-MA e LLDPE-g-MA, ambos com 1% de anidrido maleico. O efeito de cinco sequências de mistura na formação da microestrutura dos nanocompósitos foi estudado. A caracterização estrutural foi realizada por análises de difração de raio X de alto ângulo (WAXD), microscopia eletrônica de transmissão (MET) e comportamento reológico em regime permanente de deformação. Os resultados mostraram que a formação da microestrutura depende da ordem de mistura dos componentes e a utilização de mistura de dois agentes compatibilizantes miscíveis com os constituintes da matriz auxiliou na distribuição da polaridade, facilitando a dispersão das nanoargilas por toda a matriz. Dentre as sequências estudadas, as que a nanoargila foi primeiramente misturada com componentes de menor viscosidade e cristalinidade (LLDPE e/ou LLDPE-g-MA) apresentaram melhor dispersão e distribuição da nanoargila na blenda polimérica.

    Resumo em Inglês:

    High density polyethylene/linear low density polyethylene (HDPE/LLDPE) blend-based nanocomposites were prepared in a torque rheometer, using a mixture of HDPE-g-MA and LLDPE-g-MA both containing 1% of maleic anhydride as compatibilizer system. The effect from five blending sequences on the microstructure of the nanocomposites was investigated. The structural characterization was performed through wide angle X-ray diffraction (WAXD), transmission electron microscopy (TEM) and rheological properties. The results showed that the formation of morphology is dependent on the sequence of nanocomposite preparation and that the use of a mixture of two compatibilizer agents, miscible with both components of the blend matrix, facilitated the dispersion of the nanoclay throughout the matrix. The blending sequence where the nanoclay was first mixed with components of lower viscosity and crystallinity (LLDPE and/or LLDPE-g-MA) yielded better distribution and dispersion of nanoclay in the polymer blend.
  • Análise térmica da poliacrilonitrila plastificada com glicerol em extrusora Seção Técnica

    Brito Júnior, Carlos A. R.; Fleming, Robson R.; Pardini, Luiz C.; Alves, Nilton P.

    Resumo em Português:

    Neste trabalho são apresentados resultados de análise térmica para poliacrilonitrila (PAN) plastificada com glicerina. Foram observados os efeitos da glicerina de alta pureza (glicerol) e demais aditivos à base de glicóis na fusão e degradação térmica da PAN pela técnica de DSC sob alta taxa de aquecimento (90 °C/min) e atmosfera inerte. Foi constatado que o glicerol reduziu a temperatura de fusão da PAN de 290 °C para 217 °C. Em uma etapa preliminar foi empregado o método de Kissinger para verificar o efeito da composição química da PAN sob sua degradação térmica. A energia de ativação aparente para o copolímero de PAN foi calculada em 149 kJ.mol-1. Sugeriu-se que a presença do comonômero acetato de vinila (AV) na composição química da PAN proporcionou menor entalpia de degradação (353 J.g-1) em comparação com outros comonômeros constituintes de uma PAN precursora de fibras de carbono (988 J.g-1).

    Resumo em Inglês:

    This paper presents results from thermal analysis of polyacrylonitrile (PAN) plasticized with glycerin, where effects from the high purity glycerin (glycerol) and other additives to glycol were studied. Using differential scanning calorimetry (DSC) at high heating rate (90 °C/min) and inert atmosphere, we observed a decrease in the melting temperature of PAN (from 290 °C to 217 °C) owing to the presence of glycerol. The Kissinger's method was used to investigate the kinetics of thermal degradation for acrylonitrile (AN) with vinyl acetate (AV). The apparent activation energy for the copolymer AN/AV was calculated as 149 kJ.mol-1. The AV comonomer resulted in a lower degradation enthalpy for the copolymer AN/AV (353 J.g-1) compared with the comonomers comprising a precursor PAN for carbon fibers (988 J.g-1).
  • Caracterização de um pré-impregnado aeronáutico por FT-IR e análise térmica Seção Técnica

    Ferrari, Vanesa C. G. M.; Lourenço, Vera L.; Dutra, Rita de C. L.; Diniz, Milton F.; Azevedo, Margarete F. P.; David, Luis H.

    Resumo em Português:

    Este trabalho consiste na caracterização de um pré-impregnado ("prepreg") de resina epoxídica/fibra de carbono, usando-se espectroscopia no infravermelho com transformada de Fourier (FT-IR), análise termogravimétrica (TG), calorimetria exploratória diferencial (DSC) e análise térmica dinâmico-mecânica (DMTA). A análise por FT-IR foi realizada nos modos de transmissão (pastilha de KBr, pirólise em bico de Bunsen e controlada) e detecção fotoacústica (PAS). Os espectros de FT-IR de transmissão revelaram a presença de resina epoxídica, grupos ciano, amínicos e bisfenol A, que possibilitaram identificar o provável agente de cura:a cianoguanidina (ou dicianodiamida) do sistema epoxídico. Os espectros de FT-IR/PAS permitiram acompanhar as alterações espectrométricas causadas pela cura. A análise térmica auxiliou na observação e compreensão dos eventos durante o processo de cura, etapas de gelificação e vitrificação, e da influência destas nas temperaturas de transição vítrea (Tg) do material curado e na escolha do intervalo de temperatura de cura, que é um dos parâmetros mais importantes do processo produtivo.

    Resumo em Inglês:

    This work explores the characterization of pre-impregnated ("prepreg") materials made with an epoxy resin/carbon fiber, using FT-IR spectroscopy, thermogravimetry (TG), differential scanning calorimetry (DSC) and dynamic mechanical thermal analysis (DMTA). FT-IR spectroscopy was used in the transmission mode (KBr pellets, pyrolysis without control and controlled pyrolysis) and photoacoustic detection (FT-IR/PAS). The transmission FT-IR spectra revealed the presence of epoxy resin, cyano groups, amine and bisphenol A, which allowed us to identify the probable agent of cure: cyanoguanidine (or DCD). With FT-IR/PAS it was possible to monitor spectrometric changes caused by curing. The thermal analysis assisted in observing and understanding events during the curing process, including the gelation and vitrification steps. It was also useful to study the influence in the glass transition temperature (Tg) of the cured material and for choosing the curing temperature range, which is one of the main parameters in the manufacturing process.
  • Self-reinforced bioresorbable polymer P (L/DL) LA 70:30 for the manufacture of craniofacial implant

    Stares, Steferson L.; Boehs, Lourival; Fredel, Márcio Celso; Aragonês, Aguedo; Duek, Eliana A. R.

    Resumo em Inglês:

    The importance of self-reinforced bioabsorbable polymers has been growing due to their use in orthopedic and dental implants. Bioabsorbable polymeric implants manufactured only by the processes of injection or extrusion without the post processing of self-reinforcing leave a great deal on presenting an appealing alternative in terms of the mechanical strength suitable for use in the fixation of bone fractures. One of the most promising ways to promote the increase of mechanical properties of bioresorbable polymers is through the self-reinforcing technique. Self-reinforcing occurs when the internal structure of the polymer is strongly oriented in the direction of the deformation. Knowing the levels of mechanical strength obtained is essential to determine the sites of application of the component. The objective of this work was to study the method and the influence of self-reinforcing conditions, such as reduction ratio, temperature and deformation speed, on the quality and mechanical properties of small cylindrical bars obtained from the bioresorbable polymer P (L/DL) LA 70:30. The different processing conditions led to distinct levels of mechanical strength. Resistance values obtained in this work are the highest ever recorded for this material. It is important to stress that the values of mechanical strength achieved are within the limits accepted as safe for utilization in the fixation of craniofacial fractures, a fact that significantly enhances the prospects in this area.
  • Studies of optical, morphological and electrical properties of POMA/PMMA blends, using two different levels of doping with CSA

    Pereira, Nizamara S.; Sales, Maria J. A.; Ceschin, Artemis M.

    Resumo em Inglês:

    Poly(o-methoxyaniline) (POMA) was synthesized by oxidative polymerization of the monomer o-methoxyaniline. POMA/poly(methyl methacrylate) (PMMA) blends were produced by dissolving both polymers in chloroform (CHCl3).The amount of camphor sulfonic acid (CSA) used as dopant of POMA was different, providing two methods for preparation of the blends. Solutions were analyzed by Fourier transform infrared spectroscopy (FTIR) and then deposited on glass substrate by spin coating for characterization by atomic force microscope (AFM) and current versus voltage (I × V) curves. FTIR spectra of solutions were similar as expected. In the AFM images a reduction and/or loss of globules common in conducting polymers (CP) such as polyaniline (PANI) and its derivatives was observed. Films produced with different amounts of CSA presented distinct, linear and non-linear I × V curves.
  • PMMA/Ca2+ bone cements. Hydrolytic properties and bioactivity

    Hernández, Mónica L.; Ruiz, Jesús E. G.; Ramos, Adrián P.; Estévez, Gastón F.; Sánchez, Carlos A. T.

    Resumo em Inglês:

    Bone cements of poly (methyl methacrylate) (PMMA) have been used for about 40 years to fix artificial prosthesis to bone structure. The aim of this study was to evaluate the absorption, solubility, degradation and bioactivity of novel formulations of PMMA/Ca2+ bone cements. These properties were evaluated using a fractional experimental design. Hydrolytic parameters were determined, from which we found that 7/8 of the formulations for absorption and 6/8 for solubility fulfill the ISO 4049:2000 requirements. The final degradation values ranged between 1 and 5%, except for one of the formulations. Besides, some formulations showed bioactivity after seven days of immersion in SBF solution.
  • Sulfonation and characterization of styrene-indene copolymers for the development of proton conducting polymer membranes

    Becker, Cristiane M.; Biagini, Amanda B.; Forte, Maria M. C.; Amico, Sandro C.; Vargas, José V. C.; Azambuja, Denise S.

    Resumo em Inglês:

    The aim of this work is to obtain polymer precursors based on styrene copolymers with distinct degrees of sulfonation, as an alternative material for fuel cell membranes. Acetyl sulfate was used to carry out the sulfonation and the performance of the polyelectrolyte was evaluated based on the content of acid polar groups incorporated into the macromolecular chain. Polymeric films were produced by blending the sulfonated styrene-indene copolymer with poly(vinylidene fluoride). The degree of sulfonation of the polymer was strongly affected by the sulfonation reaction parameters, with a direct impact on the ionic exchange capacity and the ionic conductivity of the sulfonated polymers and the membranes obtained from them. The films produced with the blends showed more suitable mechanical properties, although the conductivity of the membranes was still lower than that of commercially available membranes used in fuel cells.
  • Chitosan as flocculant agent for clarification of stevia extract

    Oliveira, Silvia P. D. de; Mahl, Cynthia R. A.; Simões, Márcia R.; Silva, Classius F. da

    Resumo em Inglês:

    Stevia is used as a sweetener due to its low calorific value and its taste, which is very similar to that of sucrose. After extraction from dried leaves, stevia extract is dark in colour, and therefore needs to be whitened to increase acceptance by consumers. In this study we tested chitosan, a cationic polyelectrolyte, as flocculant agent for the whitening of the Stevia extract. Positive charges of chitosan can interact electrostatically with a counter-ion, sodium tripolyphosphate (TPP), and then chitosan precipitates. A factorial design was used to study the whitening process, in which Glycosides Removal, Colour Removal, Turbidity Removal and Soluble Solids Removal were evaluated. The studied factors were Chitosan Mass and pH of the TPP solution. The results showed that chitosan is a good flocculant agent, being able to flocculate both the glycosides and the pigments that make the extract coloured.
Associação Brasileira de Polímeros Rua São Paulo, 994, Caixa postal 490, São Carlos-SP, Tel./Fax: +55 16 3374-3949 - São Carlos - SP - Brazil
E-mail: revista@abpol.org.br