SciELO - Scientific Electronic Library Online

available issuesvol.54 issue332vol.55 issue334 author indexsubject indexarticles search
Home Pagealphabetic serial listing   RSS

On-line version ISSN 1678-4553


Table of contents
Cerâmica vol.55 no.333 São Paulo Jan./Mar. 2009

Analysis of accelerated process of degradation for durability research of red ceramic samples incorporated with granite waste
Xavier, G. C.; Saboya, F.; Maia, P. C. A.; Alexandre, J.

Removal of cadmium from thermally activated Toritama (Pernambuco state, Brazil) clay under finite bath conditions
Silva, M. L. P.; Rodrigues, M. G. F.; Silva, M. G. C.

Review: concepts of particle dispersion and packing for special concretes production
Castro, A. L. de; Pandolfelli, V. C.

Refractory castables prepared with hydratable alumina: the dispersant effect
Oliveira, I. R.; Pandolfelli, V. C.

Adsorption of sulfate ions in ZrO2.nH2O prepared by conventional precipitation and homogeneous solution methods
Rodrigues, L. A.; Mulinari, D. R.; Silva, M. L. C. P.

Materials used in the manufacture of the main components of solid oxide fuel cells
Nascimento, A. C.; Mohallem, N. D. S.

Incorporation of acid drainage treatment sludge waste into red ceramic products
Galatto, S. L.; Peterson, M.; Alexandre, N. Z.; Costa, J. A. D. da; Izidoro, G.; Sorato, L.; Levati, M.

Post mortem analysis of burned magnesia-chromite brick used in short rotary furnace of secondary lead smelting
Prestes, E.; Chinelatto, A. S. A.; Resende, W. S.

Permeability optimization of hot aerosol filters prepared from foaming of ceramic suspensions
Innocentini, M. D. M.; Romano, R. C. O.; Schreurs, H.; Rodrigues, V. P.; Coury, J. R.; Pileggi, R. G.

Synthesis of nickel nanoferrites doped with chromium by microwave assisted combustion reaction
Costa, A. C. F. M.; Sarubo-Junior, P.; Vieira, D. A.; Silva, V. J.; Barros, T. S.; Cornejo, D. R.; Kiminami, R. H. G. A.

Properties of pre-cast terrazzo tiles and recommended specifications
Karam, G.; Tabbara, M.

Determination of the band energy diagram and absorption fundamental edge in SnO2, deposited via sol-gel, on quartz
Floriano, E. A.; Scalvi, L. V. A.; Sambrano, J. R.

Laser scanning sintering of Ba(Ti0.85Zr0.15)O3 thick films
Antonelli, E.; Hernandes, A. C.

Comparative study of fast firing with traditional firing on the properties of ceramic clay raw materials
Dutra, R. P. S.; Varela, M. L.; Nascimento, R. M.; Gomes, U. U.; Martinelli, A. E.; Paskocimas, C. A.

Could the dispersants affect the properties of refractory castables after firing?
Oliveira, I. R.; Pandolfelli, V. C.

Refractories selection for anode baking furnace
Tiba, P. R. T.; Teider, B.H.; Figueiredo, F.; Gallo, J. B.; Pandolfelli, V. C.