| | Tabla de contenido
Matéria (Rio J.) v.13 n.2 Rio de Janeiro abr./jun. 2008 Innovación, ciencia y algo más
Miranda, Paulo Emílio Valadão de
| | | Microstructural influence of Pb-0.85wt%Sb casting alloy on its electrochemical behavior
Osorio, W.R.; Rosa, D.M.; Garcia, A.
| | | Transformation of hexagonal boron nitride in cubic boron nitride with catalytic magnesium
Junior, J.S.; Ramalho, A.M.; Bobrovnitchii, G.S.
| | | Determination of reduction of the weld line strength in injection molded
Bom, R.P.; Kalin, A.F.
| | | Microstructural changes of clayey ceramic incorporated with filter sludge from water treatment plant
Vieira, C.M.F.; Margem, J.I.; Monteiro, S.N.
| | | Carbon steel corrosion into sulphate medium in the presence of bacterium Salmonella anatum
Da Silva, R.C.B.; Pontes Filho, T.R.
| | | Simulation of the aluminum alloy A356 solidification cast in cylindrical permanent molds
Bencomo, A.; Bisbal, R.; Morales, R.
| | | Glow-discharge nitriding of ISO 5832-1 austenitic stainless steel: influence of treatment time
Dos Reis, R.F.; Maliska, A.M.; Borges, P.C.
| | | Eletrochemical hydrogenation of Nd2Fe17 and Nd2Fe15.5Ga1.5
De Melo, A.C.; Zampronio, M.A.; Colucci, C.C.; Destefano, A.; Souza, N. E.; Alves, C.S.
| | | Influence of cooling rate on corrosion of casting stainless steel
Mariano, N.A.; Murolo, J.P.; Pereira, V.F.; Pallone, A.S.N.; Tommaselli, M.A.G.
| | | Specific surface area and structures of aluminas from fibrillar pseudoboehmite
Vieira Coelho, A.C.; Rocha, G.A.; Souza Santos, P.; Souza Santos, H.; Kiyohara, P.K.
| | | Nitriding using cathodic cage technique of martensitic stainless steel AISI 420 with addition of CH4
De Sousa, R.R.M.; De Araújo, F.O.; Da Costa, J.A.P.; De Sousa, R.S.; Alves JR., C.
| | | Preparation and characterization of modified electrodes of Pt and Pd by poly-{trans-[RuCl2(vpy)4]} employing electrochemical impedance spectroscopy
Paula, M.M.S.; Zanini, L.C.; Martini, E.; Franco, C.V.
| | | Preparación electroquímica de electrodos bimetálicos PtRu soportados sobre sustratos carbonosos y su caracterización para la oxidación de metanol en medio ácido
Sieben, J.M.; Duarte, M.M.E.; Mayer, C.E.
| | | Caracterización de tres aleaciones superplásticas utilizando análisis mecánico dinámico (DMA)
Martínez-Flores, E. E.; Negrete, J.; Torres-Villaseñor, G.
| | | Co2Z hexaferrite obtained by the citrate precursor method in an inert atmosphere
Caffarena, V.R.; Ogasawara, T.; Capitaneo, J.L.; Pinho, M.S.
| | | Modelado numérico del proceso de soldadura por fricción agitación en aceros inoxidables
Pereyra, S.; Lombera, G.; Urquiza, S.; Santiago, D.; De Vedia, L.A.
| | | Alternative of recycling residues of polyurethane rigid foam with ABS
Bom, R.P.
| | | Mechanical and microstructural characterization of a multiphase microalloyed steel
Eilises, C.C.A.; Hashimoto, T. M.; Abdalla, A.J.; Pereira, M.S.
| | | Fenómenos de relajación interfacial en compuestos epoxi/aluminio
Ramajo, L.; Castro, M.S.; Reboredo, M.M.
| | | Effect of skin pass roll bending in flatness of steel strips
Silva, C.N.; Araújo, F.G.S.; Fagundes JR., J.; Cota, A.B.
| | |
|
Todo el contenido de la revista, excepto dónde está identificado, está bajo una Licencia Creative Commons
