Acessibilidade / Reportar erro
Journal of Applied Oral Science, Volume: 16, Número: 4, Publicado: 2008
  • Editorial: celebration time for the Bauru School of Dentistry at the IADR 86th General Session & Exhibition, Toronto

  • Letter to Editor Letter To The Editor

    Fedorowicz, Zbys
  • Slow-release fluoride devices: a literature review Review

    Pessan, Juliano Pelim; Al-Ibrahim, Nahla Saleh; Buzalaf, Marília Afonso Rabelo; Toumba, Kyriacos Jack

    Resumo em Inglês:

    Although the prevalence of caries has decreased dramatically over the past decades, it has become a polarised disease, with most of subjects presenting low caries levels and few individuals accounting for most of the caries affected surfaces. Thus it become evident for the need of clinical approaches directed at these high-risk patients, in order to overcome problems related to compliance and low attendance at dental care centres. Slow-release fluoride devices were developed based on the inverse relationship existing between intra-oral fluoride levels and dental caries experience. The two main types of slow-release devices - copolymer membrane type and glass bead - are addressed in the present review. A substantial number of studies have demonstrated that these devices are effective in raising intra-oral F concentrations at levels able to reduce enamel solubility, resulting in a caries-protective effect. Studies in animals and humans demonstrated that the use of these devices was able to also protect the occlusal surfaces, not normally protected by conventional fluoride regimens. However, retention rates have been shown to be the main problem related to these devices and still requires further improvements. Although the results of these studies are very promising, further randomised clinical trials are needed in order to validate the use of these devices in clinical practice. The concept of continuously providing low levels of intra-oral fluoride has great potential for caries prevention in high caries-risk groups.
  • Incidence and anatomic localization of oral candidiasis in patients with AIDS hospitalized in a public hospital in Belo Horizonte, MG, Brazil Original Articles

    Gableri, Ilanna G.; Barbosa, Anne C.; Velela, Raquel R.; Lyon, Sandra; Rosa, Carlos A.

    Resumo em Inglês:

    The objective of this study was to evaluate the incidence, anatomic localization and yeast species isolated from each clinical type of oral candidiasis. The clinical samples were obtained from 67 patients with AIDS with CD4 cell counts below 200 cells/mm³ and hospitalized in a public hospital (Eduardo de Menezes Hospital) in the city of Belo Horizonte, MG, Brazil. Yeasts were isolated using Chromagar® Candida. The results show that 50.7% of these patients had oral candidiasis. The pseudomembranous form was the most frequent clinical manifestation of oral candidiasis, followed by the erythematous and angular cheilite forms. The most common site of these clinical forms of oral candidiasis was the tongue. Candida albicans was the most common yeast species isolated from the lesions. However, other species were also found to be associated with these forms of oral candidiasis.
  • Histometric analysis of ligature-induced periodontitis in rats: a comparison of histological section planes Original Articles

    Semenoff, Tereza Aparecida Delle Vedove; Semenoff-Segundo, Alex; Bosco, Álvaro Francisco; Nagata, Maria José Hitomi; Garcia, Valdir Gouveia; Biasoli, Eder Ricardo

    Resumo em Inglês:

    The purpose of this study was to analyze the histometry of ligature-induced periodontitis in rats at different histological section depths. Sixteen male adult Wistar rats were randomly assigned to two groups: ligature and control. In the ligature group, rats received a sterile 4/0 silk ligature around the maxillary right 2nd molar. Thirty serial sections containing the 1st and 2nd molars, in which the coronal and root pulp, cementoenamel junction (CEJ) in the mesial side of the 2nd molar, interproximal alveolar bone and connective fiber attachment were clearly visible, were selected for histometric analysis. The histological sections were clustered in groups of 10 sections corresponding the buccal (B), central (C) and lingual (L) regions of the of periodontal tissue samples. The distance between the CEJ in the mesial side of the 2nd molar and the attached periodontal ligament fibers (CEJ-PL) as well as the distance between the CEJ and the alveolar bone crest (CEJ-BC) were determined. From CEJ-PL and CEJ-BC distances measured for each specimen, the measurements obtained in the B, L and C regions were recorded individually and together. Data were submitted to statistical analysis. Significant differences (p<0.001) were observed between the control and ligature groups regarding CEJ-PL (0.05 mm and 0.26 mm, respectively) and CEJ-BC (0.47 mm and 0.77 mm, respectively) measurements. Regarding the depth of the buccal, central and lingual planes, the means of CEJ-PL and CEJ-BC of both groups showed no statistically significant differences (p>0.05). In conclusion, the selection of 10 serial sections of the central region of periodontal tissue samples at any depth can be considered as representative for the evaluation of periodontal ligament fiber attachment and bone loss in ligature-induced periodontitis in rats.
  • Surface degradation of composite resins by acidic medicines and ph-cycling Original Articles

    Valinoti, Ana Carolina; Neves, Beatriz Gonçalves; Silva, Eduardo Moreira da; Maia, Lucianne Cople

    Resumo em Inglês:

    This study evaluated the effects of acidic medicines (Dimetapp® and Claritin®), under pH-cycling conditions, on the surface degradation of four composite resins (microhybrid: TPH, Concept, Opallis and Nanofilled: Supreme). Thirty disc-shaped specimens (Ø = 5.0 mm / thickness = 2.0 mm) of each composite were randomly assigned to 3 groups (n = 10): a control and two experimental groups, according to the acidic medicines evaluated. The specimens were finished and polished with aluminum oxide discs, and the surface roughness was measured by using a profilometer. After the specimens were submitted to a pH-cycling regimen and immersion in acidic medicines for 12 days, the surface roughness was measured again. Two specimens for each material and group were analyzed by scanning electron microscopy (SEM) before and after pH-cycling. Data were analyzed by the Student's-t test, ANOVA, Duncan's multiple range test and paired t-test (α=0.05). Significant increase in roughness was found only for TPH in the control group and TPH and Supreme immersed in Claritin® (p<0.05). SEM analyses showed that the 4 composite resins underwent erosion and surface degradation after being subjected to the experimental conditions. In conclusion, although the roughness was slightly affected, the pH-cycling and acidic medicines caused surface degradation of the composite resins evaluated. Titratable acidity seemed to play a more crucial role on surface degradation of composite resins than pH.
  • Influence of the curing method on the post-polymerization shrinkage stress of a composite resin Original Articles

    Cunha, Leonardo Gonçalves; Alonso, Roberta Caroline Bruschi; Souza-Junior, Eduardo José Carvalho de; Neves, Ana Christina Elias Claro; Correr-Sobrinho, Lourenço; Sinhoreti, Mário Alexandre Coelho

    Resumo em Inglês:

    The aim of this study was to evaluate the effect of different curing methods on the stress generated by the polymerization shrinkage of a restorative composite in two moments: immediately after light exposure and after 5 min. Photoactivation was performed using two different light sources: (1) xenon plasma arc (PAC) light (1,500 mW/cm2 - 3s) and (2) a quartz-tungsten-halogen (QTH) light with three light-curing regimens: continuous exposure (40 s at 800 mW/cm2 - CL); soft-start (10 s at 150 mW/cm2 and 30 s at 800 mW/cm2 - SS) and intermittent light [cycles of 4 s (2 s with light on at 600 mW/cm2 and 2 s of light off), for 80s - IL]. The composite resin was applied between two 5-mm diameter metallic rods, mounted in a servohydraulic machine. The maximum stress was recorded immediately after light exposure (FF) and after 5 min (5F). The results were submitted to ANOVA and Tukey's test (5%). For each method, the results obtained in FF and 5F were, respectively: CL (3.58 and 4.46 MPa); SS (2.99 and 4.36 MPa); IL (3.11 and 4.32 MPa) and PAC (0.72 and 3.27 MPa). The stress generated by the polymerization shrinkage during light exposure can be associated with the photoactivation method used. A significant increase in the stress level was observed during the post-curing period up to 5 min, for all evaluated methods.
  • Effectiveness of a new toothbrush design versus a conventional tongue scraper in improving breath odor and reducing tongue microbiota Original Articles

    Casemiro, Luciana Assirati; Martins, Carlos Henrique Gomes; Carvalho, Tatiane Cruz de; Panzeri, Heitor; Lavrador, Marco Aurélio Sichirolli; Pires-de-Souza, Fernanda de Carvalho Panzeri

    Resumo em Inglês:

    For centuries, specific instruments or regular toothbrushes have routinely been used to remove tongue biofilm and improve breath odor. Toothbrushes with a tongue scraper on the back of their head have recently been introduced to the market. The present study compared the effectiveness of a manual toothbrush with this new design, i.e., possessing a tongue scraper, and a commercial tongue scraper in improving breath odor and reducing the aerobic and anaerobic microbiota of tongue surface. The evaluations occurred at 4 moments, when the participants (n=30) had their halitosis quantified with a halimeter and scored according to a 4-point scoring system corresponding to different levels of intensity. Saliva was collected for counts of aerobic and anaerobic microorganisms. Data were analyzed statistically by Friedman's test (p<0.05). When differences were detected, the Wilcoxon test adjusted for Bonferroni correction was used for multiple comparisons (group to group). The results confirmed the importance of mechanical cleaning of the tongue, since this procedure provided an improvement in halitosis and reduction of aerobe and anaerobe counts. Regarding the evaluated methods, the toothbrush's tongue scraper and conventional tongue scraper had a similar performance in terms of breath improvement and reduction of tongue microbiota, and may be indicated as effective methods for tongue cleaning.
  • Determination of the maximum inhibitory dilution of cetylpyridinium chloride-based mouthwashes against staphylococcus aureus: an in vitro study Original Articles

    Watanabe, Evandro; Tanomaru, Juliane Maria Guerreiro; Nascimento, Andresa Piacezzi; Matoba-Júnior, Fumio; Tanomaru-Filho, Mario; Yoko Ito, Izabel

    Resumo em Inglês:

    The aim of this in vitro study was to determine the maximum inhibitory dilution (MID) of four cetylpyridinium chloride (CPC)-based mouthwashes: CPC+Propolis, CPC+Malva, CPC+Eucaliptol+Juá+Romã+Propolis (Natural Honey®) and CPC (Cepacol®), against 28 Staphylococcus aureus field strains, using the agar dilution method. Decimal dilutions ranging from 1/10 to 1/655,360 were prepared and added to Mueller Hinton Agar. Strains were inoculated using Steers multipoint inoculator. The inocula were seeded onto the surface of the culture medium in Petri dishes containing different dilutions of the mouthwashes. The dishes were incubated at 37ºC for 24 h. For readings, the MID was considered as the maximum dilution of mouthwash still capable of inhibiting microbial growth. The obtained data showed that CPC+Propolis had antimicrobial activity against 27 strains at 1/320 dilution and against all 28 strains at 1/160 dilution, CPC+Malva inhibited the growth of all 28 strains at 1/320 dilution, CPC+Eucaliptol+Juá+Romã+Propolis inhibited the growth of 2 strains at 1/640 dilution and all 28 strains at 1/320 dilution, and Cepacol® showed antimicrobial activity against 3 strains at 1/320 dilution and against all 28 strains at 1/160 dilution. Data were submitted to Kruskal-Wallis test, showing that the MID of Cepacol® was lower than that determined for the other products (p<0.05). In conclusion, CPC-mouthwashes showed antimicrobial activity against S. aureus and the addition of other substances to CPC improved its antimicrobial effect.
  • Effect of conventional and experimental gingival retraction solutions on the tensile strength and inhibition of polymerization of four types of impression materials Original Articles

    Sábio, Sérgio; Franciscone, Paulo Afonso; Mondelli, José

    Resumo em Inglês:

    In the present study, two types of tests (tensile strength test and polymerization inhibition test) were performed to evaluate the physical and chemical properties of four impression materials [a polysulfide (Permlastic), a polyether (Impregum), a condensation silicone (Xantopren) and a polyvinylsiloxane (Aquasil),3; when polymerized in contact with of one conventional (Hemostop) and two experimental (Vislin and Afrin) gingival retraction solutions. For the tensile strength test, the impression materials were mixed and packed into a steel plate with perforations that had residues of the gingival retraction solutions. After polymerization, the specimens were tested in tensile strength in a universal testing machine. For the polymerization inhibition test, specimens were obtained after taking impressions from a matrix with perforations that contained 1 drop of the gingival retraction solutions. Two independent examiners decided on whether or not impression material remnants remained unpolymerized, indicating interference of the chemical solutions. Based on the analysis of the results of both tests, the following conclusions were reached: 1. The tensile strength of the polysulfide decreased after contact with Hemostop and Afrin. 2. None of the chemical solutions inhibited the polymerization of the polysulfide; 3. The polyether presented lower tensile strength after polymerization in contact with the three gingival retraction agents; 4. The polyether had its polymerization inhibited only by Hemostop; 5. None of the chemical solutions affected the tensile strength of the condensation silicone; 6. Only Hemostop inhibited the polymerization of the condensation silicone; 7. The polyvinylsiloxane specimens polymerized in contact with Hemostop had significantly lower tensile strength; 8. Neither of the chemical solutions (Afrin and Vislin) affected the tensile strength of the polyvinylsiloxane and the condensation silicone; 9. Results of the tensile strength and polymerization inhibition tests suggest that Vislin can be used as substance of gingival retraction without affecting the tested properties of four impression materials.
  • Dental caries experience in 12-year-old schoolchildren in southeastern Brazil Original Articles

    Cypriano, Silvia; Hoffmann, Rosana H. S.; Sousa, Maria da Luz R. de; Wada, Ronaldo S.

    Resumo em Inglês:

    The aim of this study was to evaluate the prevalence of caries-free children using DMFT and significant caries (SiC) indexes in different caries prevalence groups in cities of the region of Campinas, São Paulo State, Brazil. The methodology proposed by the World Health Organization (1997) was used for caries diagnosis in 2,378 individuals. According to the DMFT index obtained in each evaluated city, 3 prevalence groups with representative samples were formed, being classified as low, moderate and high. SiC index was used to classify the one third of the population with the highest caries prevalence. In the low prevalence group, 32.4% of the children were caries free (DMFT=0), with mean DMFT of 2.29 and SiC index of 4.93. In the moderate prevalence group, 21.8% of the children were caries free, with mean DMFT of 3.36 and SiC of 6.74. Only 6.9% of the children in the high prevalence group were caries free and the mean DMFT was 5.54 (SiC=9.62). There was a great heterogeneity in dental caries distribution within the studied population, as well as a high caries prevalence considering the 3 classifications. Other indexes besides DMFT could be used to improve oral health assessment during establishment of the treatment plan and intervention.
  • Effect of a dentifrice containing aloe vera on plaque and gingivitis control: a double-blind clinical study in humans Original Articles

    Oliveira, Sílvia Morgana Araújo de; Torres, Ticiana Carneiro; Pereira, Sérgio Luís da Silva; Mota, Olívia Morais de Lima; Carlos, Márlio Ximenes

    Resumo em Inglês:

    The effect of Aloe vera on the reduction of plaque and gingivitis was evaluated in a randomized, parallel and double-blind clinical trial. Subjects were randomly allocated to the test group (n=15) - dentifrice containing Aloe vera - or the control group (n=15) - fluoridated dentifrice. Plaque index (PI) and gingival bleeding index (GBI) were assessed at days 0 and 30. Subjects were asked to brush their teeth with the control or test dentifrice, three times a day, during a 30-day period. There was a significant reduction on plaque and gingivitis in both groups, but no statistically significant difference was observed among them (p>0.01). The dentifrice containing Aloe vera did not show any additional effect on plaque and gingivitis control compared to the fluoridated dentifrice.
  • Toxicity Testing of Restorative Dental Materials Using Brine Shrimp Larvae (Artemia salina) Original Articles

    Milhem, Manar M.; Al-Hiyasat, Ahmad S.; Darmani, Homa

    Resumo em Inglês:

    This study investigated the effect of extracts of different composites, glass ionomer cement (GIC)s and compomers on the viability of brine shrimp larvae. Ethanolic extracts of four dental composites (Z-100; Solitaire 2; Filtek P60 and Synergy), a conventional GIC (Ketac-Fil), a resin-modified glass ionomer cement (Vitremer), two compomers (F2000; Dyract AP), and a flowable compomer (Dyract Flow) were prepared from each material. Following evaporation of the ethanol, the extracts were resuspended in distilled water, which was then used to test the effects on the viability of brine shrimp larvae. For the composites, the extract of Synergy was the least toxic (88% viability) followed by the extracts of Solitaire 2, Z100 and P60 (75%, 67.5% and 50% viability, respectively). One-way ANOVA revealed highly significant differences between the resin composite materials (p<0.001). Follow-up comparison between the composite groups by Tukey's pairwise multiple-comparison test (α =0.05) showed that the extract of Synergy was significantly less toxic than the extracts of all the other materials except that of Solitaire 2. The compomers showed 100% lethality, while the percentage of viable larvae for the extracts of Ketac-Fil, and Vitremer were 32.3%, and 37.0%, respectively. One-way ANOVA revealed highly significant differences between the groups of materials (p<0.001). Follow-up comparison between the groups by Tukey's test (α = 0.05) showed that the toxic effect of the extracts of the compomers were significantly greater than that of Ketac-Fil, and Vitremer. The differences in the toxic effects of Vitremer and Ketac-Fil were not statistically significant. In conclusion, the toxicity of composite materials varied according to their chemical composition. Compomers were the most lethal materials to brine shrimp larvae followed by GICs and then composites.
  • Segmental LeFort I osteotomy for treatment of a class III malocclusion with temporomandibular disorder Original Articles

    Janson, Marcos; Janson, Guilherme; Sant'Ana, Eduardo; Nakamura, Alexandre; Freitas, Marcos Roberto de

    Resumo em Inglês:

    This article reports the case of a 19-year-old young man with Class III malocclusion and posterior crossbite with concerns about temporomandibular disorder (TMD), esthetics and functional problems. Surgical-orthodontic treatment was carried out by decompensation of the mandibular incisors and segmentation of the maxilla in 4 pieces, which allowed expansion and advancement. Remission of the signs and symptoms occurred after surgical-orthodontic intervention. The maxillary dental arch presented normal transverse dimension. Satisfactory static and functional occlusion and esthetic results were achieved and remained stable. Three years after the surgical-orthodontic treatment, no TMD sign or symptom was observed and the occlusal results had not changed. When vertical or horizontal movements of the maxilla in the presence of moderate maxillary constriction are necessary, segmental LeFort I osteotomy can be an important part of treatment planning.
Faculdade De Odontologia De Bauru - USP Serviço de Biblioteca e Documentação FOB-USP, Al. Dr. Octávio Pinheiro Brisolla 9-75, 17012-901 Bauru SP Brasil, Tel.: +55 14 32358373 - Bauru - SP - Brazil
E-mail: jaos@usp.br