Resumo em Inglês:

Despite a plethora of in situ studies and clinical trials evaluating the efficacy of fluoridated dentifrices on caries control, in vitro pH cycling models are still broadly used because they mimic the dynamics of mineral loss and gain involved in caries formation. This paper critically reviews the current literature on existing pH-cycling models for the in vitro evaluation of the efficacy of fluoridated dentifrices for caries control, focusing on their strengths and limitations. A search was undertaken in the MEDLINE electronic journal database using the keywords "pH-cycling", "demineralization", "remineralization", "in vitro", "fluoride", "dentifrice". The primary outcome was the decrease of demineralization or the increase of remineralization as measured by different methods (e.g.: transverse microradiography) or tooth fluoride uptake. Inclusion of studies, data extraction and quality assessment were undertaken independently and in duplicate by two members of the review team. Disagreements were solved by discussion and consensus or by a third party. One hundred and sixteen studies were included, of which 42 addressed specifically the comparison of dentifrices using different pH-cycling models. The other studies included meta-analysis or reviews, data about the effect of different fluoride sources on de-remineralization, different methods for analysis de-remineralization and chemical variables and characteristics of dental hard tissues that might have influence on de-remineralization processes. Generally, the studies presented ability to detect known results established by clinical trials, to demonstrate dose-related responses in the fluoride content of the dentifrices, and to provide repeatability and reproducibility between tests. In order to accomplish these features satisfactorily, it is mandatory to take into account the type of substrate and baseline artificial lesion, as well as the adequate response variables and statistical approaches to be used. This critical review of literature showed that the currently available pH-cycling models are appropriate to detect dose-response and pH-response of fluoride dentifrices, and to evaluate the impact of new active principles on the effect of fluoridated dentifrices, as well as their association with other anti-caries treatments.

Resumo em Inglês:

OBJECTIVES: The aim of this study was to test the efficacy of a locally applied 8.5% nanostructured doxycycline (DOX) gel in preventing alveolar bone loss in experimental periodontal disease (EPD) in rats by using the tapping mode atomic force microscopy (AFM). MATERIAL AND METHODS: EPD was induced in 24 Wistar rats. Animals were treated with the doxycycline gel topically, immediately after EPD induction, and 3 times a day during 11 days. Four groups (n=6) were formed as follows: Naïve group (animals not subjected to EPD nor treated); non-treated (NT) group (animals subjected to EPD, but not treated); vehicle gel (VG) group (animals subjected to EPD and treated with topical gel vehicle); and DOX group (test group): animals subjected to EPD and treated with the 8.5% DOX gel. In order to investigate topographical changes in histological sections, a novel simple method was used for sample preparation, by etching sections from paraffin-embedded specimens with xylol. RESULTS: Comparing the AFM images, several grooves were observed on the surface of the alveolar bone and other periodontal structures in the NT and VG groups, with significantly greater depths when compared to the DOX group (p<0.05). CONCLUSIONS: Periodontal structures were brought into high relief confirming to be a simple and cost-effective method for AFM imaging with ultrastructural resolution. The doxycycline gel was able to afford periodontal surface preservation, with flatter grooves.

Resumo em Inglês:

OBJECTIVES: The aim of this study was to evaluate cases of dental trauma treated at the specialized center of Pontifical Catholic University of Paraná, Curitiba, Brazil, during a period of 2 years. MATERIAL AND METHODS: A total of 647 patients were evaluated and treated between 2003 and 2005. Data obtained from each patient were tabulated and analyzed as to gender, age, etiology, time elapsed after the injury, diagnosis (type of trauma), and affected teeth. RESULTS: The results revealed that male individuals aged 7 to 13 years presented the highest prevalence of injury, and falling was the main causal factor. In most cases, the time elapsed between the accident and the first care ranged from 4 to 24 h. A total of 1,747 teeth were affected, with higher incidence of concussion/subluxation and coronal fracture, followed by lateral luxation and avulsion. The permanent maxillary central incisors were the most commonly affected teeth. CONCLUSION: The frequency and causes of dentoalveolar trauma should be investigated for identification of risk groups, treatment demands and costs in order to allow for the establishment of effective preventive measures that can reduce the treatment duration and costs for both patients and oral health services.

Resumo em Inglês:

Although the search for the ideal bone substitute has been the focus of a large number of studies, autogenous bone is still the gold standard for the filling of defects caused by pathologies and traumas, and mainly, for alveolar ridge reconstruction, allowing the titanium implants installation. OBJECTIVES: The aim of this study was to evaluate the dynamics of autogenous bone graft incorporation process to surgically created defects in rat calvaria, using epifluorescence microscopy. MATERIAL AND METHODS: Five adult male rats weighing 200-300 g were used. The animals received two 5-mm-diameter bone defects bilaterally in each parietal bone with a trephine bur under general anesthesia. Two groups of defects were formed: a control group (n=5), in which the defects were filled with blood clot, and a graft group (n=5), in which the defects were filled with autogenous bone block, removed from the contralateral defect. The fluorochromes calcein and alizarin were applied at the 7th and 30th postoperative days, respectively. The animals were killed at 35 days. RESULTS: The mineralization process was more intense in the graft group (32.09%) and occurred mainly between 7 and 30 days, the period labeled by calcein (24.66%). CONCLUSIONS: The fluorochromes showed to be appropriate to label mineralization areas. The interfacial areas between fluorochrome labels are important sources of information about the bone regeneration dynamics.

Resumo em Inglês:

OBJECTIVE: Local anesthetic solutions with vasoconstrictors are not contraindicated in hypertensive patients, but due to their hemodynamic effects, local anesthetics without vasoconstrictors are mainly preferred by the clinicians. The aim of this study was to compare hemodynamic effects of three different local anesthetics without vasoconstrictors during tooth extraction in hypertensive patients. MATERIAL AND METHODS: Sixty-five mandibular molars and premolars were extracted in 60 hypertensive patients (29 females and 31 males; mean age: 66.95 ± 10.87 years; range: 38 to 86 years old). Inferior alveolar and buccal nerve blocks were performed with 2% lidocaine hydrochloride (HCl), 2% prilocaine HCl or 3% mepivacaine HCl without vasoconstrictor. Hemodynamic parameters namely systolic blood pressure (SBP), diastolic blood pressure (DBP), mean arterial pressure (MAP), heart rate (HR), saturation rate (SR), rate pressure product (RPP) and pressure rate quotient (PRQ) were investigated before and at different intervals after anesthetic injection. RESULTS: The hemodynamic effects of the three agents were similar to each other, although some significance was observed for DBP, MAP, RPP and PRQ values in the lidocaine, prilocaine and mepivacaine groups. CONCLUSION: Lidocaine, prilocaine and mepivacaine solutions without vasoconstrictor can be safely used in hypertensive patients. It is advisable that dental practitioners select anesthetic solutions for hypertensive patients considering their cardiovascular effects in order to provide patient comfort and safety.

Resumo em Inglês:

OBJECTIVE: This study evaluated the effect of ferrule preparation (Fp) on the fracture resistance of endodontically treated teeth, restored with composite resin cores with or without glass fiber posts. MATERIAL AND METHODS: Forty-four bovine teeth were sectioned 19 or 17 mm (2 mm ferrule) from the apex, endodontically treated and assigned to four groups (n = 11): Group 1: Fp and post; Group 2: Fp and without post; Group 3: without Fp and with post; Group 4: without Fp and without post. All specimens were restored with composite resin core and metal crown. Specimens were subjected to fracture resistance testing in a universal testing machine at a crosshead speed of 0.5 mm/min. The data were analyzed by two-way ANOVA and Tukey's tests (α=0.05). RESULTS: The mean fracture resistance values were as follows: Group 1: 573.3 N; Group 2: 552.5 N; Group 3: 275.3 N; Group 4: 258.6 N. Significantly higher fracture resistance was found for the groups with Fp (p<0.001). CONCLUSION: There was no statistically significant interaction between the "Fp" and "post" factors (p = 0.954). The ferrule preparation increased the fracture resistance of endodontically treated teeth. However, the use of glass fiber post showed no significant influence on the fracture resistance.

Resumo em Inglês:

Information on the longevity of fiber-reinforced composite fixed partial dentures (inlay FPDs) should be considered in the selection of materials, operative techniques and patient instructions related to prognosis and long-term cost-effectiveness. OBJECTIVE: This study evaluated the long-term survival of fiber-reinforced, adhesively-bonded composite prostheses placed in posterior teeth. Materials and Methods: Twenty-one patients that received adhesively bonded polyethylene inlay FPDs in posterior teeth were selected from a private practice dental office and invited to evaluation. Of the eligible 21 patients, 13 (mean age 50.3 ± 11.5 years) agreed to be enrolled as participants, providing 22 restorations, as several subjects presented more than one inlay FPD. One dentist placed all inlay FPDs using Ribbond as reinforcement and Tetric Ceram/Durafil or Charisma/Renamel composite combinations, according to manufacturer's instructions. Two independent calibrated operators performed the evaluation, using modified USPHS criteria. Survival functions of restorations were analyzed with Kaplan-Meier and Log Rank test (α = 0.05). RESULTS: The majority of restorations received A or B scores. Four (18.2%) inlay FPDs fractured among the 22 evaluated. The mean estimate survival rate was 7 years (95% CI: 5.9 to 8.1), and the overall percentage of survival was 81.8%. There were no significant differences (p>0.05) between composite combinations or tooth location considering all clinical aspects evaluated and survival functions. CONCLUSION: Posterior fiber-reinforced fixed partial dentures exhibited acceptable clinical performance after a period up to 8 years.

Resumo em Inglês:

OBJECTIVES: To evaluate the color stability and hardness of two denture liners obtained by direct and indirect techniques, after thermal cycling and immersion in beverages that can cause staining of teeth. MATERIAL AND METHODS: Seventy disc-shaped specimens (18 x 3 mm) processed by direct (DT) and indirect techniques (IT) were made from Elite soft (n=35) and Kooliner (n=35) denture liners. For each material and technique, 10 specimens were subjected to thermal cycling (3,000 cycles) and 25 specimens were stored in water, coffee, tea, soda and red wine for 36 days. The values of color change, Shore A hardness (Elite soft) and Knoop hardness (Kooliner) were obtained. The data were subjected to ANOVA, Tukey's multiple-comparison test, and Kruskal-Wallis test (P<0.05). RESULTS: The thermal cycling promoted a decrease on hardness of Kooliner regardless of the technique used (Initial: 9.09± 1.61; Thermal cycling: 7.77± 1.47) and promoted an increase in the hardness in the DT for Elite Soft (Initial: 40.63± 1.07; Thermal cycling: 43.53± 1.03); hardness of Kooliner (DT: 8.76± 0.95; IT: 7.70± 1.62) and Elite Soft (DT: 42.75± 1.54; IT=39.30± 2.31) from the DT suffered an increase after the immersion in the beverages. The thermal cycling promoted color change only for Kooliner in the IT. Immersion in the beverages did not promote color change for Elite in both techniques. The control group of the DT of Kooliner showed a significant color change. Wine and coffee produced the greatest color change in the DT only for Elite Soft when compared to the other beverages. CONCLUSION: The three variation factors promoted alteration on hardness and color of the tested denture lining materials.

Resumo em Inglês:

OBJECTIVES: This study assessed the bone density gain and its relationship with the periodontal clinical parameters in a case series of a regenerative therapy procedure. MATERIAL AND METHODS: Using a split-mouth study design, 10 pairs of infrabony defects from 15 patients were treated with a pool of bovine bone morphogenetic proteins associated with collagen membrane (test sites) or collagen membrane only (control sites). The periodontal healing was clinically and radiographically monitored for six months. Standardized pre-surgical and 6-month postoperative radiographs were digitized for digital subtraction analysis, which showed relative bone density gain in both groups of 0.034 ± 0.423 and 0.105 ± 0.423 in the test and control group, respectively (p>0.05). RESULTS: As regards the area size of bone density change, the influence of the therapy was detected in 2.5 mm² in the test group and 2 mm² in the control group (p>0.05). Additionally, no correlation was observed between the favorable clinical results and the bone density gain measured by digital subtraction radiography (p>0.05). CONCLUSIONS: The findings of this study suggest that the clinical benefit of the regenerative therapy observed did not come with significant bone density gains. Long-term evaluation may lead to a different conclusions.

Resumo em Inglês:

Chemical substances used during biomechanical preparation of root canals can alter the composition of dentin surface and affect the interaction with restorative materials. OBJECTIVE: The purpose of this study was to evaluate the microtensile bond strength (µTBS) of a self-etching adhesive system to dentin irrigated with sodium hypochlorite (NaOCl) and ethylenediaminetetraacetic acid (EDTA). MATERIAL AND METHODS: Thirty human third molars were sectioned 3 mm below the occlusal surface, polished with 600- to 1200-grit silicon carbide papers, and randomly divided into 3 groups: G1 (control): no irrigating solution; G2: 1% NaOCl; and G3: 1% NaOCl followed by the application of 17% EDTA. The specimens received the self-etching adhesive system (XENO III - Dentsply), restored with microhybrid composite resin (Z250 - 3M ESPE), sectioned and trimmed to create 4 hourglass-shaped slabs of each tooth. The slabs were tested in microtensile strength in a universal testing machine (Emic DL 2000) at a crosshead speed of 0.5 mm/min until fracture. The results were analyzed statistically by ANOVA and Newman-Keuls test. RESULTS: Mean µTBS values and standard deviations in MPa were: G1 = 11.89 ± 4.22; G2 = 19.41 ± 5.32; G3 = 11.34 ± 4.73. 1% NaOCl increased the adhesive resistance significantly (p<0.001/F=22.5763). The application of 1% NaOCl/17% EDTA resulted in statistically similar µTBS to the control group. CONCLUSIONS: None of the irrigants affected negatively the µTBS of XENO III to dentin. The use of 1% NaOCl alone resulted in higher bond strength than the other treatments. The combination of 1% NaOCl and 17% EDTA produced similar bond strength to that of untreated dentin.

Resumo em Inglês:

OBJECTIVES: To produce a copper (Cu) stepwedge with aluminum (Al) equivalent mean gray values (MGV). MATERIAL AND METHODS: The thicknesses of Cu steps that were equivalent to those of the Al were formulated using the X-ray attenuation properties of the materials. The Al and fabricated Cu stepwedges were radiographed, but the MGVs of the Cu stepwedge were mismatching to those of the Al. Using a mathematical function to adjust the pixel MGV of Cu stepwedge to those of the Al, new Cu stepwedges were created. In vitro iterations were performed until best approximation to Al was reached. RESULTS: The MGV of the Cu stepwedges fabricated by formularization were different than those of Al (p=0.001). Iteration method led to MGV similar to those of the Al stepwedge (p=0.207). CONCLUSIONS: Construction of a Cu stepwedge according to the basic rules of radiophysic failed to result in a stepwedge with similar radiodensity values to those of Al stepwedge. Further studies may use the formularization method only for prototype Cu wedge production, but consecutive iterations shall be compassed to obtain the best approximation to Al MGV.

Resumo em Inglês:

OBJECTIVES: It is well known that the efficacy and the efficiency of a Class II malocclusion treatment are aspects closely related to the severity of the dental anteroposterior discrepancy. Even though, sample selection based on cephalometric variables without considering the severity of the occlusal anteroposterior discrepancy is still common in current papers. In some of them, when occlusal parameters are chosen, the severity is often neglected. The purpose of this study is to verify the importance given to the classification of Class II malocclusion, based on the criteria used for sample selection in a great number of papers published in the orthodontic journal with the highest impact factor. MATERIAL AND METHODS: A search was performed in PubMed database for full-text research papers referencing Class II malocclusion in the history of the American Journal of Orthodontics and Dentofacial Orthopedics (AJO-DO). RESULTS: A total of 359 papers were retrieved, among which only 72 (20.06%) papers described the occlusal severity of the Class II malocclusion sample. In the other 287 (79.94%) papers that did not specify the anteroposterior discrepancy severity, description was considered to be crucial in 159 (55.40%) of them. CONCLUSIONS: Omission in describing the occlusal severity demands a cautious interpretation of 44.29% of the papers retrieved in this study.

Resumo em Inglês:

OBJECTIVES: The purpose of this study was to measure and compare the root canal cleanliness and smear layer removal effectiveness of Aquatine Endodontic Cleanser (Aquatine EC) when used as an endodontic irrigating solution in comparison with 6% sodium hypochlorite (NaOCl). MATERIAL AND METHODS: Forty-five human teeth were randomly allocated to five treatment groups; the pulp chamber was accessed, cleaned, and shaped by using ProTaper and ProFile rotary instrumentation to an ISO size #40. The teeth were then processed for scanning electron microscopy, and the root canal cleanliness and removal of smear layer were examined. RESULTS: The most effective removal of smear layer occurred with Aquatine EC and NaOCl, both with a rinse of EDTA. CONCLUSIONS: Aquatine EC appears to be the first hypochlorous acid approved by the FDA to be a possible alternative to the use of NaOCl as an intracanal irrigant. Further research is needed to identify safer and more effective alternatives to the use of NaOCl irrigation in endodontics.

Resumo em Inglês:

OBJECTIVE: Several haemostatic agents are available for clinical use. Ankaferd Blood Stopper® (ABS), a mixture of five medicinal plant extracts, has been used historically as a haemostatic agent. The aim of this in vivo study was to investigate the effects of ABS on early bone healing using a rat tibia defect model. MATERIAL AND METHODS: Sixteen male Wistar rats were randomized into two groups of 8 animals each. After deep anesthesia with ketamine, bone defects (3 mm diameter and 2 mm deep) were created in the right and left tibiae of all animals and either treated with 1 cc of ABS (Group 1) or left untreated (Group 2; control). Surgical areas were closed primarily. The animals were sacrificed on the 7th postoperative day and bone samples were collected from the tibias. The samples were examined histopathologically for infection, necrosis, fibrosis, new bone formation and foreign body reaction. The histomorphometric results were analyzed statistically by the chi square test, with the level of significance set at p<0.05. RESULTS: Significant differences were found in both groups in terms of inflammation, necrosis and new bone formation (p=0.001, p=0.0001, p=0.001). No foreign body reaction was observed in the experimental group. ABS application decreased fibrosis in the experimental group, but there were no statistically significant differences from the control group. CONCLUSIONS: Histopathologically, it was observed that the application of ABS decreased the occurrence of inflammation and necrosis, while increasing new bone formation in early bone healing period. Further in vitro and in vivo studies are necessary for evaluating the benefits and possible adverse effects of the application of this herbal product on wound healing.

Resumo em Inglês:

OBJECTIVES: The purpose of this investigation was to evaluate the effects of different implant surface treatments on implant stability in dog mandibles. MATERIAL AND METHODS: A total of 30 implants (Dentium Co, Seoul, Korea) were placed in 5 dog mandibles. Bone quality was assessed at each site. Implant stability was evaluated using 2 different methods. An OsstellTM resonance frequency analyzer (RFA) was used to determine the stability at baseline (day 1), and 3, 6 and 10 weeks after surgery. Animals were euthanized 10 weeks after implant installation. Specimens were obtained and submitted to the laboratory processing. Sections were stained with hematoxylin and eosin for histologic and histomorphometric analyses. All implantation sites in dog mandibles demonstrated bone types II and III. RESULTS AND CONCLUSIONS: All implants showed good primary stability at baseline in terms of insertion torque. The results of this study suggest that surface treatment may have significant effects on biological stability 3 weeks after implant placement. Further studies are needed to confirm these initial observations in poor quality bone.

Resumo em Inglês:

OBJECTIVE: To assess microleakage in conservative class V cavities prepared with aluminum-oxide air abrasion or turbine and restored with self-etching or etch-and-rinse adhesive systems. Materials and Methods: Forty premolars were randomly assigned to 4 groups (I and II: air abrasion; III and IV: turbine) and class V cavities were prepared on the buccal surfaces. Conditioning approaches were: groups I/III - 37% phosphoric acid; groups II/IV - self-priming etchant (Tyrian-SPE). Cavities were restored with One Step Plus/Filtek Z250. After finishing, specimens were thermocycled, immersed in 50% silver nitrate, and serially sectioned. Microleakage at the occlusal and cervical interfaces was measured in mm and calculated by a software. Data were subjected to ANOVA and Tukey's test (α=0.05). RESULTS: Marginal seal provided by air abrasion was similar to high-speed handpiece, except for group I. There was SIGNIFICANT difference between enamel and dentin/cementum margins for to group I and II: air abrasion. The etch-and-rinse adhesive system promoted a better marginal seal. At enamel and dentin/cementum margins, the highest microleakage values were found in cavities treated with the self-etching adhesive system. At dentin/cementum margins, high-speed handpiece preparations associated with etch-and-rinse system provided the least dye penetration. CONCLUSION: Marginal seal of cavities prepared with aluminum-oxide air abrasion was different from that of conventionally prepared cavities, and the etch-and-rinse system promoted higher marginal seal at both enamel and dentin margins.

Resumo em Inglês:

OBJECTIVE: The aim of this study was to detect the prevalence of selected bacterial species in intraoral sites of patients with chronic periodontitis (CP) using multiplex polymerase chain reaction (PCR). METHODOLOGY: Samples were collected from the tongue dorsum, buccal mucosa, supragingival and subgingival plaque and saliva of 30 patients with untreated CP. Multiplex PCR was used to determine prevalence rates, which were then compared using a chi-square test. Significance level was set at p<0.05. Mean and standard deviation values were used to evaluate variations in prevalence according to site. RESULTS: The prevalence of S. mutans was 70% in saliva; 60% in samples collected from the tongue dorsum; 50% in samples collected from the buccal mucosa; 56.5% in the supragingival plaque; and 53.5% in the subgingival plaque. The prevalence of E. faecalis ranged from 3.5% to 13.5% in all intraoral microenvironment. The highest prevalence of P. gingivalis was found in subgingival plaque (53.5%), and of P. intermedia in supragingival plaque (33.5%), subgingival plaque (30%) and tongue dorsum (33.5%). The prevalence of bacteria did not vary significantly among the intraoral sites. CONCLUSIONS: All studied bacteria were identified in intraoral sites. S. mutans, P. gingivalis and P. intermedia had high prevalence rates, but the prevalence of E. faecalis was low. Multiplex PCR proved to be an adequate method for epidemiological studies.

Resumo em Inglês:

Sialocele is a subcutaneous cavity containing saliva, caused by trauma or infection in the parotid gland parenchyma, laceration of the parotid duct or ductal stenosis with subsequent dilatation. It is characterized by an asymptomatic soft and mobile swelling on the parotid region. Imaging studies are useful and help establishing the diagnosis, such as sialography, ultrasonography, computed tomography and magnetic resonance imaging. This paper describes a recurrent case of a parotid sialocele in a young female patient. She presented a 6 cm x 5 cm swelling on the left parotid region. The ultrasonographic scan of the area revealed a hypoechoic ovoid well defined image suggesting a cyst. A sialography of the left parotid showed a cavitary sialectasia in a panoramic and anteroposterior view. A conservative management was adopted by percutaneous needle aspiration of the swelling, which was useful to provide material for analysis and helped healing. Dentists should be aware of this pathology and the importance in adopting a conservative treatment whenever it is possible.