Resumo em Inglês:

Abstract Bone development and healing processes involve a complex cascade of biological events requiring well-orchestrated synergism with bone cells, growth factors, and other trophic signaling molecules and cellular structures. Beyond health processes, MMPs play several key roles in the installation of heart and blood vessel related diseases and cancer, ranging from accelerating metastatic cells to ectopic vascular mineralization by smooth muscle cells in complementary manner. The tissue inhibitors of MMPs (TIMPs) have an important role in controlling proteolysis. Paired with the post-transcriptional efficiency of specific miRNAs, they modulate MMP performance. If druggable, these molecules are suggested to be a platform for development of “smart” medications and further clinical trials. Thus, considering the pleiotropic effect of MMPs on mammals, the purpose of this review is to update the role of those multifaceted proteases in mineralized tissues in health, such as bone, and pathophysiological disorders, such as ectopic vascular calcification and cancer.

Resumo em Inglês:

Abstract The stable long-term performance of resin cement under oral environmental conditions is a crucial factor to obtain a satisfactory success of the allceramic dental restoration. Objective: This study aimed at evaluating and comparing the surface morphology and mechanical property of conventional and self-adhesive resin cement after aqueous aging. Materials and Methods: Disc-shaped specimens of 3 conventional (C1: Multilink N, C2: Duolink, C3: Nexus 3) and 3 self-adhesive (S1: Multilink Speed, S2: Biscem, S3: Maxcem) types of resin cements were subjected to irradiation. After 24 h, the Knoop microhardness of each resin cement was evaluated. The specimens were immersed separately in distilled water and maintained at 37°C. A total of 5 specimens of each resin cement were collected at the following time intervals of immersion: 1, 6, 12 and 18 months. The samples were used to evaluate the Knoop parameters of microhardness, sorption and solubility. The surface morphology of the specimens after 18 months of immersion was observed by scanning electron microscopy. The sorption and solubility data were analyzed by two-way ANOVA. The Knoop microhardness was tested by the ANOVA repeated measures (P<0.05). Results: The sorption and solubility parameters of C1 and S1 exhibited significant fluctuations during the aqueous aging. The hardness of the S1 and S2 specimens decreased significantly after an 18-month water immersion. The S1, S2 and S3 specimens indicated higher filler exposure and stripping and apparent pores and cracks compared to specimens C1, C2 and C3, respectively. Conclusion: The surface of selfadhesive resin cements is more susceptible to aqueous damage than that of the conventional resin cements.

Resumo em Inglês:

Abstract Stanozolol (ST) is a synthetic androgen with high anabolic potential. Although it is known that androgens play a positive role in bone metabolism, ST action on bone cells has not been sufficiently tested to support its clinical use for bone augmentation procedures. Objective: This study aimed to assess the effects of ST on osteogenic activity and gene expression in SaOS-2 cells. Material and Methods: SaOS-2 deposition of mineralizing matrix in response to increasing doses of ST (0-1000 nM) was evaluated through Alizarin Red S and Calcein Green staining techniques at 6, 12 and 24 days. Gene expression of runt-related transcription factor 2 (RUNX2), vitamin D receptor (VDR), osteopontin (SPP1) and osteonectin (ON) was analyzed by RT-PCR. Results: ST significantly influenced SaOS-2 osteogenic activity: stainings showed the presence of rounded calcified nodules, which increased both in number and in size over time and depending on ST dose. RT-PCR highlighted ST modulation of genes related to osteogenic differentiation. Conclusions: This study provided encouraging results, showing ST promoted the osteogenic commitment of SaOS-2 cells. Further studies are required to validate these data in primary osteoblasts and to investigate ST molecular pathway of action.

Resumo em Inglês:

Abstract Obesity is considered a risk factor for periodontal health due to the low- grade inflammation promoted by the increased adipose tissue. Objective: This study aimed to determine correlations and associations between gingival inflammation (Simplified Oral Hygiene Index, and Gingival Index), salivary immunoglobulin A (s-IgA), and salivary parameters (salivary flow and osmolality) in normal-weight and overweight/obese children. Material and Methods: Ninety-one children, aged 6 to 12 years old (8.6±1.9 years), were divided into two groups according to their body mass index (BMI), circumferences, skinfold measurements and body fat percentage: normal- weight group (NWG; n =50) and overweight/obese group (OG; n =41). A calibrated examiner performed the clinical examination using the Simplified Oral Hygiene Index, Gingival Index, and salivary collection. Data analysis included descriptive statistics and association tests ( p <0.05). Results: OG presented statistically higher s-IgA values compared with NWG, especially among the obese children ( p <0.05). Significant positive correlations between s-IgA and salivary osmolality in OG ( p <0.05), and between s-IgA and BMI values ( p <0.05) and body fat percentage ( p <0.05) were observed among all the children. Effect size varied from moderate for s-IgA values ( d =0.57) to large for BMI ( d =2.60). Conclusion: Gingival inflammation and salivary parameters were similar for NWG and OG; however, s-IgA presented higher values in OG, with correlations between BMI and body fat percentage.

Resumo em Inglês:

Abstract Objective: Myofibroblasts have been associated with the development of several pathologic fibrotic conditions. This longitudinal study aims to assess the proliferative and antiapoptotic effects of cyclosporin, nifedipine and phenytoin on gingival connective tissue cells of nonhuman primate, as well as to analyze a possible role of myofibroblasts in gingival overgrowth. Materials and Methods: Gingival samples from the right superior canine area were obtained from 12 male monkeys ( Sapajus spp ) to comprise the control group. After one week, the animals were randomly assigned to three groups, which received daily oral doses of cyclosporin, nifedipine or phenytoin for 120 days. Gingival samples were collected from the left superior canine area of two animals of each group at 52 and 120 days. Histological sections were stained with hematoxylin and eosin, and immunoreacted against α-SMA, Ki- 67 and bcl-2. Results: α-SMA immunoreaction was negative in the control and experimental groups. Similarly, no difference between groups concerning immunostaining against Ki-67 and bcl-2 was observed in connective tissue cells. Conclusion: Based on this methodology, it may be concluded that gingival overgrowths induced by cyclosporin, nifedipine and phenytoin are not associated with neither myofibroblast transdifferentiation, proliferation nor apoptosis of gingival connective cells in monkeys.

Resumo em Inglês:

Abstract Ankylosing Spondylitis (AS) is an inflammatory rheumatic disease that affects the axial skeleton and the sacroiliac joints. Recent studies investigated the link between AS and oral diseases, particularly periodontitis. Others suggested that periodontitis may have a role in the pathogenesis of rheumatic diseases. Objective: The aim of this study is to investigate the association between AS and oral conditions. Material and Methods: This research was conducted using the UK Biobank Resource under Application Number 26307. The UK Biobank recruited around 500000 participants throughout Great Britain. Clinical records were available for 2734 participants. Two case-control studies were conducted based on whether AS was self-reported or clinically diagnosed. Oral conditions were identified using self-reported reports of oral ulcers, painful gums, bleeding gums, loose teeth, toothache, and dentures. The association between AS and oral conditions was assessed using logistic regression adjusted for age, gender, educational level, smoking status, alcohol consumption, and body mass index. Results: A total of 1307 cases and 491503 control participants were eligible for the self-reported AS study. The mean age was 58 years for the cases [7.5 standard deviation (SD)] and 57 years for the control groups (8.1 SD). Also, 37.1% of the cases and 54.2% of the control participants were females. Among the oral conditions, only oral ulcers were strongly associated with AS [1.57 adjusted odds ratio (OR); 95% confidence interval (CI) 1.31 to 1.88]. For the study of clinically diagnosed AS, 153 cases and 490351 control participants were identified. The mean age for both cases and control groups was 57 years; 7.6 SD for the cases and 8.1 for the control group. Females corresponded to 26.1% of the cases, and 54.2% of the control participants. Clinically diagnosed AS was associated with self-reported oral ulcers (2.17 adjusted OR; 95% CI 1.33 to 3.53). Conclusion: Self-reported and clinically diagnosed AS populations have increased risk of reporting oral ulcers. Further investigations are required to assess the link between a specific type of oral condition and AS.

Resumo em Inglês:

Abstract Objective: To analyze color change, microhardness and chemical composition of enamel bleached with in-office bleaching agent with different desensitizing application protocols. Materials and Methods: One hundred and seventeen polished anterior human enamel surfaces were obtained and randomly divided into nine groups (n = 13). After recording initial color, microhardness and chemical composition, the bleaching treatments were performed as G1: Signal Professional White Now POWDER&LIQUID FAST 38% Hydrogen peroxide(S); G2: S+Flor Opal/0.5% fluoride ion(F); G3: S+GC Tooth Mousse/Casein Phosphopeptide-Amorphous Calcium Phosphate (CPP-ACP) paste(TM); G4: S+UltraEZ/3% potassium nitrate&0.11% fluoride(U); G5: S+Signal Professional SENSITIVE PHASE 1/30% Nano-Hydroxyapatite (n-HAP) suspension(SP); G6: S-F mixture; G7: S-TM mixture; G8: S-U mixture; G9: S-SP mixture. Color, microhardness and chemical composition measurements were repeated after 1 and 14 days. The percentage of microhardness loss (PML) was calculated 1 and 14 days after bleaching. Data were analyzed with ANOVA, Welch ANOVA, Tukey and Dunnett T3 tests (p<0.05). Results: Color change was observed in all groups. The highest ΔE was observed at G7 after 1 day, and ΔE at G8 was the highest after 14 days (p<0.05). A decrease in microhardness was observed in all groups except G6 and G7 after 1 day. The microhardness of all groups increased after 14 days in comparison with 1 day after bleaching (p>0.05). PML was observed in all groups except G6 and G7 after bleaching and none of the groups showed PML after 14 days. No significant changes were observed after bleaching at Ca and P levels and Ca/P ratios at 1 or 14 days after bleaching (p>0.05). F mass increased only in G2 and G6, 1 day after bleaching (p<0.05). Conclusions: The use of desensitizing agents containing fluoride, CPP-ACP, potassium nitrate or n-HAP after in-office bleaching or mixed in bleaching agent did not inhibit the bleaching effect. However, they all recovered microhardness of enamel 14 days after in-office bleaching.

Resumo em Inglês:

Abstract In this study, the effects of ozonetherapy on secondary wound healing were evaluated histologically and immuno-histochemically. Material and Methods: 8 healthy pigs were used in this study. Six wounds with 10 mm in diameter were created through the punch technique on the palatinal gingiva of each pig. Ozone gas was applied on only 3 wounds (test group) and the remaining 3 were left to natural healing (control group). Biopsy samples were taken from one of the wounds in each group on the third day, from another wound of each group on the seventh day, and from another one on the tenth day. Routine histological analysis and immuno-histochemical staining were performed to investigate transforming growth factor-beta (TGF-β) and (VEGF) expressions. Results: No statistical difference was found between the test and control groups in terms of collagen fibers, epithelial formation and inflammation scores. A VEGF expression found in the test group was statistically higher than control group samples taken on the 3rd and 7th day. There was no statistical difference between the test and control groups in terms of TGF-β expression on any of the sampling days. Conclusion: The topical application of ozone gas could be effective in the early stages of wound healing by increasing the amount of VEGF expression. Clinical Relevance: Topical application of ozone gas may be effective in the early stages of oral wound healing.

Resumo em Inglês:

Abstract The use of antimicrobial agents is an efficient method to prevent dental caries. Also, nanometric antibacterial agents with wide antibacterial spectrum and strong antibacterial effects can be applied for prevention of dental caries. Objectives: The aim of this study was to evaluate the inhibitory effect of reduced graphene oxide-silver nanoparticles (rGO/Ag) composite on the progression of artificial enamel caries in a Streptococcus mutans biofilm model. Material and Methods: Enamel specimens from bovine incisors were divided into eight treatment groups (n = 13), as follows: group 1 was inoculated with S. mutans grown in Brain Heart Infusion containing 1% sucrose (1% BHIS), as negative control; groups 2-4 were inoculated with S. mutans grown in the presence of different rGO/Ag concentrations (0.08, 0.12, 0.16 mg/mL) + 1% BHIS; group 5-7 were inoculated with S. mutans grown in the presence of different agents (0.16 mg/mL reduced graphene oxide, 0.16 mg/mL silver nanoparticles, 10 ppm NaF) + 1% BHIS; group 8 was mixed with 1% BHIS, without inoculation. Artificial enamel carious lesions were produced by S. mutans biofilm model for 7 days. Confocal laser scanning microscopy and atomic force microscopy were used to analyze roughness and morphology of the enamel surface. Polarized light microscopy and confocal laser scanning microscopy were employed to measure the lesion depth and the relative optical density (ROD) of the demineralized layer. Results: Compared with the control groups, the rGO/Ag groups showed: (a) reduced enamel surface roughness; (b) much smoother and less eroded surfaces; (c) shallower lesion depth and less mineral loss. Conclusion: As a novel composite material, rGO/Ag can be a promising antibacterial agent for caries prevention.

Resumo em Inglês:

Abstract Radiation-related caries are one the most undesired reactions manifested during or after head and neck radiotherapy. Fluoride application is an important strategy to reduce demineralization and enhance remineralizaton. Objective: To evaluate the effect of the topical application of fluoride during irradiation on dental enamel demineralization. Material and Methods: Thirty molars were randomly divided into three groups: Non-irradiated (NI), Irradiated (I), Irradiated with fluoride (IF). Each group was subdivided according to the presence or absence of pH-cycling (n=5). In the irradiated groups, the teeth received 70 Gy. The enamel's chemical composition was measured using Fourier Transform Infrared Spectrometry (organic matrix/mineral ratio - M/M and relative carbonate content - RCC). Vickers microhardness (VHN) and elastic modulus (E) were evaluated at three depths (surface, middle and deep enamel). Scanning electron microscopy (SEM) was used to assess the enamel's morphology. Results: The FTIR analysis (M/M and RCC) showed significant differences for irradiation, pH-cycling and the interaction between factors (p<0.001). Without pH-cycling, IF had the lowest organic matrix/mineral ratio and relative carbonate content. With pH-cycling, the organic matrix/mineral ratio increased and the relative carbonate content decreased, except for IF. VHN was influenced only by pH-cycling (p<0.001), which generated higher VHN values. ANOVA detected significant differences in E for irradiation (p<0.001), pH-cycling (p<0.001) and for the interaction between irradiation and pH-cycling (p<0.001). Increased E was found for group I without pH-cycling. With pH-cycling, groups I and IF were similar, and showed higher values than NI. The SEM images showed no morphological changes without pH-cycling. With pH-cycling, fluoride helped to maintain the outer enamel's morphology. Conclusions: Fluoride reduced mineral loss and maintained the outer morphology of irradiated and cycled enamel. However, it was not as effective in preserving the mechanical properties of enamel. Radiotherapy altered the enamel's elastic modulus and its chemical composition.

Resumo em Inglês:

Abstract Surface changes in biological environments are critical for the evaluation of physical and biological activity of biomaterials. Objective: This study investigated surface alterations of calcium silicate-based cements after exposure to different environments. Material and Methods: Forty-eight cylindrical cavities were prepared on root surfaces. The cavities were filled using ProRoot MTA or Biodentine and assigned to four subgroups (n=6): dry, wet, acidic, and blood. Surface topographies were evaluated using an optical profilometer for 28 days, and the roughness of the material surfaces was quantified. Vertical dimensional change was measured by determining the height difference between the material surface and the flat tooth surface. Data were compared with a two-way repeated measures ANOVA and Bonferroni tests. Results: In dry condition, the surface roughness of MTA or Biodentine was constant up to 3 days (p>0.05) but decreased after 28 days (p<0.05). In dry condition, ProRoot MTA presented constant surface level through time, while Biodentine showed decreased surface level after 28 days. In wet condition, the roughness and the surface levels of both materials increased after 1 day (p<0.05). Neither the surface roughness nor the levels of the materials showed significant changes in acidic conditions (p>0.05). Both materials showed the highest roughness in blood conditions on the 1st day (p<0.05), while the surface roughness in blood decreased dramatically after 28 days. The roughness of Biodentine was higher in wet conditions up to 3 days compared with ProRoot MTA (p<0.05). Likewise, in blood condition, Biodentine showed higher roughness on the 28th day than ProRoot MTA (p<0.05). Conclusions: Dry, wet, and blood conditions had a time-dependent effect on the surface roughness and vertical dimensional changes of the materials. However, acidic conditions did not affect the roughness and the surface level of the materials.

Resumo em Inglês:

Abstract The acquired enamel pellicle (AEP) is an organic film, bacteria-free, formed in vivo as a result of the selective adsorption of salivary proteins and glycoproteins to the solid surfaces exposed to the oral environment. Objective: This study aimed to compare the proteomic profile of AEP formed in situ on human and bovine enamel using a new intraoral device (Bauru in situ pellicle model - BISPM). Material and Methods: One hundred and eight samples of human and bovine enamel were prepared (4×4 mm). Nine subjects with good oral conditions wore a removable jaw appliance (BISPM) with 6 slabs of each substrate randomly allocated. The AEP was formed during the morning, for 120 minutes, and collected with an electrode filter paper soaked in 3% citric acid. This procedure was conducted in triplicate and the pellicle collected was processed for analysis by LC-ESI-MS/MS. The obtained mass spectrometry MS/MS spectra were searched against human protein database (SWISS-PROT). Results: The use of BISPM allowed the collection of enough proteins amount for proper analysis. A total of 51 proteins were found in the AEP collected from the substrates. Among them, 15 were common to both groups, 14 were exclusive of the bovine enamel, and 22 were exclusive of the human enamel. Proteins typically found in the AEP were identified, such as Histatin-1, Ig alpha-1, Ig alpha 2, Lysozyme C, Statherin and Submaxillary gland androgen-regulated protein 3B. Proteins not previously described in the AEP, such as metabolism, cell signaling, cell adhesion, cell division, transport, protein synthesis and degradation were also identified. Conclusion: These results demonstrate that the proteins typically found in the AEP appeared in both groups, regardless the substrate. The BISPM revealed to be a good device to be used in studies involving proteomic analysis of the AEP.

Resumo em Inglês:

Abstract Objectives: The aim of this in vitro study was to evaluate the bonding strength of non-simplified dentin bonding systems (DBS) to dentin irradiated with a diode laser (970 nm) immediately and after 12 months of water storage following either primer or bond application. Material and methods: The experimental design included three different factors: DBS type [AdperTM Scotchbond Multipurpose (MP) and Clearfil™ SE Bond (CSE)], irradiation [without irradiation - control (C), irradiation after primer application (AP), and irradiation after bond application (AB)], and time [initial (I) and after 12 months of water storage (12 m)]. Sixty sound human third molars (n = 10) were obtained, and their flat occlusal dentin areas were prepared and standardized. Laser irradiation was performed in the contact mode perpendicular to the dental surface over an automatically selected scanning area at a pulse energy of 0.8 W, frequency of 10 Hz, and energy density of 66.67 J/cm2. After 7 days of treatment, the specimens were cut, and half of them were subjected to microtensile testing (500 N/0.05 mm/min), whereas the remaining sticks were examined after 12 months of water storage. The obtained data were analyzed by three-way analysis of variance (ANOVA) followed by a Tukey test (p<0.05). The observed fracture modes were investigated using a portable digital microscope with a magnification of 40x. Results: Among the utilized DBS, MP generally exhibited higher bond strengths, but did not always differ from CSE under similar conditions. The irradiation factor was statistically significant only for the MP/AB groups. After 12 months of storage, all groups demonstrated a significant reduction in the bond strength, whereas the results of fracture analysis showed a predominance of the adhesive type. Conclusions: The laser treatment of non-simplified DBS was not able to stabilize their bonding characteristics after 12 months.

Resumo em Inglês:

Abstract Objectives: This study investigated the physical and mechanical properties, antibacterial effect and biocompatibility of novel elastomeric temporary resin-based filling materials (TFMs) containing zinc methacrylate (ZM). Material and Methods: Experimental TFMs were prepared by mixing the zinc methacrylate with monomer, co-monomer, photoinitiator and fillers. A ZM concentration of 0 (control), 0.5% (Z0.5); 1% (Z1), 2% (Z2), or 5% (ZM5) wt% was added to the TFMs. Fermit-N (F) was used for comparison with the experimental material. Microleakage, water sorption/solubility, degree of conversion, depth of cure, ultimate tensile strength, and hardness were determined and compared. A modified direct contact test (DCT) with Enterococcus faecalis and a Streptococcus mutans’ biofilm accumulation assay was carried out to evaluate the antimicrobial effect and cytotoxicity of the assay. Statistical comparisons were performed (α=5%). Results: The results showed that the physical and mechanical properties of the experimental TFMs with ZM are comparable with the properties of the commercial reference and some properties were improved, such as lower microleakage and water sorption, and higher ultimate tensile strength values. TFMs with ZM killed E. faecalis only after 1 h. Biofilm development of S. mutans was not affected by the inclusion of ZM in the experimental TFMs. Conclusions: The present findings suggest that the physical, mechanical and biological properties of the experimental TFMs with ZM are comparable with the properties of the commercial reference. However, some properties were improved, such as lower microleakage and water sorption, and higher ultimate tensile strength values.

Resumo em Inglês:

Abstract Objective The aim of this study was to evaluate patients’ pain levels during four different debonding procedures. The null hypothesis was that the pain perception of the patients undergoing four different debonding applications was not statistically significant different. Material and Methods One hundred and twenty orthodontic patients who underwent orthodontic debonding were included in this study. The patients were randomly divided into 4 groups according to technique used in the patients. Debonding groups were as follows: Group 1) Conventional debonding group, Group 2) Medication group (acetaminophen was given 1 hour before debonding), Group 3) Soft bite wax group, and Group 4) Soft acrylic bite wafer group. The patients’ levels of anxiety and fear of pain were evaluated before debonding, and Numerical Rating Scale (NRS) was applied to evaluate their pain perception during debonding. Mann-Whitney U and Kruskal–Wallis tests were used to evaluate non-normally distributed data. Categorical data analysis were carried by chi-square and McNemar tests. The significance level was set at p<0.05. Results Anxiety scores of the patients were not statistically significant between both genders and debonding groups. In the quadrants in which the patients were perceived, the highest pain level was in the left side of the mandible. The teeth in which the highest pain level was perceived were the lower left and upper right lateral incisors. Although there was no statistically significant difference among the pain scores of the patients in each group, quadrant scores of female patients showed significant differences, being the lowest scores in the soft bite wax group. Conclusions Majority of the patients had no fear of pain before debonding. Pain levels of the patients in the conventional debonding group were not significantly different from those of the other groups, except quadrant scores of females in the soft bite wax group. The null hypothesis was accepted.

Resumo em Inglês:

Abstract Objective To evaluate the efficacy of different sonic and ultrasonic devices in the elimination of debris from canal irregularities in artificial root canals. Materials and Methods A resin model of a transparent radicular canal filled with dentin debris was used. Five groups were tested, namely: Group 1 – ultrasonic insert 15.02; Group 2 – ultrasonic insert 25/25 IRRI K; Group 3 – ultrasonic insert 25/25 IRRI S; Group 4 – sonic insert 20/28 Eddy on a vibrating sonic air-scaler handpiece; Group 5 – 20.02 K-file inserted on a Safety M4 handpiece. Two different irrigants (5% sodium hypochlorite and 17% EDTA) and 3 different times of activation (20, 40, and 60 seconds) were tested. Means and standard deviations were calculated and statistically analyzed with the Kruskal-Wallis and Wilcoxon tests (p<0.05). Results No statistically significant differences were found between the two irrigants used. Group 4 removed more debris than the other groups (p<0.05). Groups 1, 2, and 3 removed more debris than group 5 (p<0.05). A statistically significant difference (p<0.05) was found for the time of activation in all groups and at all canal levels, except between 40 and 60 seconds in group 4 at coronal and middle third level (p>0.05). Conclusions No significant differences were found between 5% sodium hypochlorite and 17% EDTA. When the time of activation rises, the dentin debris removal increases in all groups. Both sonic and ultrasonic activation demonstrate high capacity for dentin debris removal.

Resumo em Inglês:

Abstract Currently, there is no consensus in terms of defining the minimum radiant exposure values necessary for achieving adequate properties of composite resin. In addition, the long-term influence that radiant exposure has on the properties of composite resins is still questionable. Objective: The objective of this study was to evaluate the effect of radiant exposure and UV accelerated aging on the physico-chemical and mechanical properties of micro-hybrid and nanofilled composite resins. Material and Methods: A nanofilled (Filtek Supreme; 3M ESPE) and a micro-hybrid composite resin (Filtek Z250; 3M ESPE) were investigated under different radiant exposures (3.75, 9, and 24 J/cm2) and UV accelerated aging protocols (0, 500, 1000, and 1500 aging hours). The degree of conversion (DC), flexural strength (FS), modulus (M), water sorption (WS), and solubility (WL) were evaluated. The results obtained were analyzed using two-way ANOVA and Tukey's test. Comparisons were performed using a significance level of α=0.05. Results: The DC, FS, and M were found to be significantly influenced by both radiant exposure and accelerated aging time. The DC and EM increased with radiant exposure in the no-aging group (0-hour aging) for both micro-hybrid and nanofilled composites, whereas no correlation was found after accelerated aging protocols. WS and WL of micro-hybrid and nanofilled composite resins were scarcely affected by radiant exposure (p>0.05), whereas they were significantly reduced by accelerated aging (p<0.001). Conclusions: Although increasing radiant exposure affected the degree of conversion and mechanical properties of micro-hybrid and nanofilled composites, no influence on the hydrolytic degradation of the material was observed. In contrast, UV accelerated aging affected both the physico-chemical and mechanical properties of the composites.

Resumo em Inglês:

Abstract Objective The aim of this study was to compare two in vitro erosion protocols, in which one simulates in vivo conditions experienced by patients with gastroesophageal disorders or bulimia (HCl-pepsin protocol), and the other simulates the diet of an individual who consumes a high volume of erosive beverages (citric acid protocol). In addition, the mechanical properties and surface gloss of eroded human dentin were compared with those of sound human dentin. Materials and Methods Blocks of cervical dentin were used: sound human dentin (n=10), human dentin with erosive lesions (n=10), and bovine dentin (n=30). Twenty bovine blocks were subjected to either of two erosion protocols (n=10/protocol). In the first protocol, samples were demineralized using HCl-pepsin solution, then treated with trypsin solution. In the second protocol, samples were demineralized with 2% citric acid. Toothbrushing was performed in both protocols using a toothbrushing machine (15 s with a 150 g load). Ten bovine dentin blocks were not subjected to any erosive treatment. All samples of bovine and human dentin were analyzed to obtain Martens hardness values (MH), elastic modulus (Eit*) and surface gloss. One-way ANOVA and Tukey's test were performed to analyze the data (α=0.05). Results Sound human and eroded human dentin groups showed similar MH and Eit* values (p>0.05); however, sound human dentin showed a higher surface gloss value when compared to eroded human dentin (p<0.05). Sound bovine dentin and HCl-pepsin-treated bovine dentin treatments resulted in similar values for both MH and Eit* (p>0.05), but HCl-pepsin-treated bovine dentin and citric acid-treated bovine dentin resulted in lower surface gloss than sound bovine dentin (p<0.05). Conclusions The HCl-pepsin protocol modified bovine dentin properties that could be similar to those that occur on human dentin surfaces with erosive lesions.

Resumo em Inglês:

Abstract Several anti-proteolytic dentin therapies are being exhaustively studied in an attempt to reduce dentin bond degradation and improve clinical performance and longevity of adhesive restorations. Objectives This study assessed the effect of epigallocatechin-3-gallate (EGCG) on long-term bond strength when incorporated into adhesives. Material and Methods Adhesive systems were formulated with EGCG concentrations of 0 wt%: (no EGCG; control); 0.5 wt% EGCG; 1.0 wt% EGCG, and 1.5 wt% EGCG. Flexural strength (FS), modulus of elasticity (ME), modulus of resilience (MR), compressive strength (CS), degree of conversion (DC), polymerization shrinkage (PS), percentage of water sorption (%WS), percentage of water solubility (%WL) and cytotoxicity properties were tested. Dentin microtensile bond strength (µTBS) was evaluated after 24 h and again after 6 months of water storage. The adhesive interface was analyzed using scanning electron microscopy (SEM). Results No significant differences were found among the groups in terms of FS, ME, MR, CS and PS. EGCG-doped adhesives increased the DC relative to the control group. EGCG concentrations of 1.0 wt% and 0.5 wt% decreased the WS of adhesives. WL decreased in all cases in which EGCG was added to adhesives, regardless of the concentration. EGCG concentrations of 1.0 wt% and 0.5 wt% reduced cytotoxicity. EGCG concentrations of 1.0 wt% and 0.5 wt% preserved µTBS after 6 months of storage, while 1.5 wt% EGCG significantly decreased µTBS. SEM: the integrity of the hybrid layer was maintained in the 0.5 wt% and 1.0 wt% EGCG groups. Conclusion EGCG concentrations of 1.0 wt% and 0.5 wt% showed better biological and mechanical performance, preserved bond strength and adhesive interface, and reduced cytotoxicity.

Resumo em Inglês:

Abstract Bulk-fill composites were introduced in dentistry to accelerate clinical procedures while providing adequate outcomes. Concerns regarding the use of bigger composite increments rely on the polymerization shrinkage and shrinkage stress, which may generate gaps on the adhesive interface and result in a reduced success rate. Objective: To evaluate the polymerization shrinkage stress of different bulk-fill resin composites and their elastic modulus. Materials and Methods: Fourteen specimens were made for each of the nine different resin composites (seven with 12 mm3 and seven with 24 mm3): Surefill SDR flow (SDR), X-tra Base (XB), Filtek Bulk Fill Flowable (FBF), Filtek Z350XT Flow (Z3F); Tetric Evo Ceram Bulk Fill (TBF), X-tra Fil (XF), Filtek Bulk Fill (FBP), Admira Xtra Fusion (ADM) and Filtek Z350 XT (Z3XT). Linear shrinkage stress was evaluated for 300 s with the aid of a linear shrinkage device adapted to a Universal Testing Machine. For each composite group, seven additional specimens (2x2x25 mm) were made and Young's modulus was evaluated with a 3-point bending device adapted in a Universal Testing Machine with 0.5 mm/min crosshead speed and 50 KgF loading cell. Results: For 12 mm3 specimens, three-way ANOVA showed that only SDR and TBF generated lower stress after 20 s. Considering 300 s, TBF, SDR, and XF generated the lowest stress, followed by ADM, FBP, XB, and FBF, which were similar to Z3XT. Z3F generated the highest stress values for all time points. Considering 24 mm3 specimens after 20 s, all bulk fill composites generated lower stress than Z3XT, except XB. After 300 s, SDR, FBP, and ADM generated the lowest stress, followed by TBF and XF. For elastic modulus, one-way ANOVA showed that FBF, SDR, Z3F, and ADM presented the lowest values, followed by XB and TBF. FBP, Z3XT, and XF presented the highest elastic modulus among the evaluated composites. Conclusions: Bulk-fill resin composites presented equal to lower shrinkage stress generation when compared to conventional composites, especially when bigger increments were evaluated. Bulk-fill composites showed a wide range of elastic modulus values, but usually similar to “regular” composites.

Resumo em Inglês:

Abstract Objectives This investigation aimed to assess the differentiation inhibitory effects of ProRoot MTA® (PMTA) and Biodentine® (BIOD) on osteoclasts originated from murine bone marrow macrophages (BMMs) and compare these effects with those of alendronate (ALD). Materials and Methods Mouse BMMs were cultured to differentiate into osteoclasts with macrophage colony-stimulating factor and receptor activator of NF-κB (RANKL), treated with lipopolysaccharide. After application with PMTA, BIOD, or ALD, cell toxicities were examined using WST-1 assay kit, and RANKL-induced osteoclast differentiation and activities were determined by resorption pit formation assay and tartrate-resistant acid phosphate (TRAP) staining. The mRNA levels of osteoclast activity-related genes were detected with quantitative real time polymerase chain reaction. Expressions of molecular signaling pathways were assessed by western blot. All data were statistically analyzed with one-way ANOVA and Tukey's post-hoc test (p<0.05). Results Mouse BMMs applied with PMTA, BIOD, or ALD showed highly reduced levels of TRAP-positive osteoclasts. The BIOD treated specimens suppressed mRNA expressions of cathepsin K, TRAP, and c-Fos. Nonetheless, it showed a lower effect than PMTA or ALD applications. Compared with ALD, PMTA and BIOD decreased RANKL-mediated phosphorylation of ERK1/2 and IκBα. Conclusions PMTA and BIOD showed the inhibitory effect on osteoclast differentiation and activities similar to that of ALD through IκB phosphorylation and suppression of ERK signaling pathways.

Resumo em Inglês:

Abstract Objectives The aim of this study was to evaluate the influence of surfactants 0.2% or 0.1% cetrimide (Cet) or 0.008% benzalkonium chloride (BAK) on 2.5% calcium hypochlorite (Ca(OCl)2), and compare to sodium hypochlorite (NaOCl), regarding the properties of pH, free chlorine content, surface tension, contact angle, pulp dissolution and antimicrobial activity. Material and Methods The pH and free chlorine content were evaluated by digital pHmeter and by titration, respectively. Surface tension was measured by the platinum ring technique with a Du Noüy tensiometer. The solution's contact angle in human dentin surfaces was checked by Drop Shape Analyzer software. Bovine pulps were used for pulp dissolution analysis and the dissolving capacity was expressed by percent weight loss. Antimicrobial activity over Enterococcus faecalis was evaluated by the agar diffusion method. Results Surfactants addition to Ca(OCl)2 and NaOCl did not alter the pH, free chlorine content and pulp dissolution properties. Ca(OCl)2 had the highest surface tension among all tested solutions. When surfactants were added to Ca(OCl)2 and NaOCl, there was a significant reduction of surface tension and contact angle values. The addition of 0.2% or 0.1% Cet enhanced antimicrobial activity of both Ca(OCl)2 and NaOCl. Conclusion Surfactant addition to 2.5% Ca(OCl)2 has shown acceptable outcomes for pH, free chlorine content, surface tension, contact angle, pulp dissolution and antimicrobial activity. Furthermore, the addition of 0.2% Cet showed better results for all tested properties.

Resumo em Inglês:

Abstract Microcosm biofilm has been applied to induce carious lesions in dentin. However, no study has been done to compare the impact of the type of model for providing nutrients to microcosm biofilm formation on dentin. Objective This study compared the performance of two kinds of models (static and semi-dynamic) on the biofilm formation and the development of dentin carious lesions. Material and Methods In both models, biofilm was produced using inoculum from pooled human saliva mixed with McBain saliva for the first 8 h (5% CO2 and 37°C). Afterwards, for the static model, the samples were placed in 24-wells microplate containing McBain saliva with 0.2% sucrose, which was replaced at 24 h. In the semi-dynamic model, the samples were submitted to artificial mouth system with continuous flow of McBain saliva with 0.2% sucrose (0.15 ml/min, 37°C) for 10 h a day (for the other 14 h, no flow was applied, similarly to the static model). After 5 days, biofilm viability was measured by fluorescence and dentin demineralization by transverse microradiography. Results Biofilm viability was significantly lower for the static compared with semi-dynamic model, while dentin demineralization was significantly higher for the first one (p<0.05). The static model was able to produce a higher number of typical subsurface lesions compared with the semi-dynamic model (p<0.05). Conclusions The type of model (static and semi-dynamic) applied in the microcosm biofilm may have influence on it's viability and the severity/profile of dentin carious lesions.

Resumo em Inglês:

Abstract Objective the aim of this study was to describe the frequency of psychosocial diagnoses in a large sample of patients attending a tertiary clinic for treatment of temporomandibular disorders (TMD). Material and Methods six hundred and ninety-one patients who sought treatment for pain-related TMD were selected. Chronic pain-related disability (Graded Chronic Pain Scale, GCPS), depression [Symptoms Checklist-90 (SCL-90) scale for depression, DEP] and somatization levels (SCL-90 scale for non-specific physical symptoms, SOM) were evaluated through the Research Diagnostic Criteria for TMD (RDC/TMD) Axis II psychosocial assessment; TMD diagnoses were based on the Axis I criteria. Results the majority of patients presented a low disability or no disability at all, with only a small portion of individuals showing a severely limiting, high disability pain-related impairment (4.3%). On the other hand, abnormal scores of depression and somatization were high, with almost half of the individuals having moderate-to-severe levels of depression and three-fourths presenting moderate-to-severe levels of somatization. The prevalence of high pain-related disability (GCPS grades III or IV), severe/moderate depression and somatization was 14.3%, 44% and 74.1% respectively. Gender differences in scores of SCL-DEP (p=0.031) and SCL-SOM (p=0.001) scales were signficant, with females presenting the highest percentage of abnormal values. Conclusion patients with TMD frequently present an emotional profile with low disability, high intensity pain-related impairment, and high to moderate levels of somatization and depression. Therefore, given the importance of psychosocial issues at the prognostic level, it is recommended that clinical trials on TMD treatment include an evaluation of patients’ psychosocial profiles.

Resumo em Inglês:

Abstract Objective This study aimed to investigate the effects of dodecacalcium hepta-aluminate (C12A7) content on some physicochemical properties and cytocompatibility of tricalcium silicate (C3S) cement using human dental pulp cells (hDPCs). Material and Methods High purity C3S cement was manufactured by a solid phase method. C12A7 was mixed with the cement in proportions of 0, 5, 8, and 10 wt% (C12A7-0, −5, −8, and −10, respectively). Physicochemical properties including initial setting time, compressive strength, and alkalinity were evaluated. Cytocompatibility was assessed with cell viability tests and cell number counts. Statistical analysis was performed by using one-way analysis of variance (ANOVA) and Tukey's test (p<0.05). Results The initial setting time of C3S-based cement was shorter in the presence of C12A7 (p<0.05). After 1 day, C12A7-5 showed significantly higher compressive strength than the other groups (p<0.05). After 7 days, the compressive strength of C12A7-5 was similar to that of C12A7-0, whereas other groups showed strength lower than C12A7-0. The pH values of all tested groups showed no significant differences after 1 day (p>0.05). The C12A7-5 group showed similar cell viability to the C12A7-0 group (p>0.05), while the other experimental groups showed lower values compared to C12A7-0 group (p<0.05). The number of cells grown on the C12A7-5 specimen was higher than that on C12A7-8 and −10 (p<0.05). Conclusions The addition of C12A7 to C3S cement at a proportion of 5% resulted in rapid initial setting time and higher compressive strength with no adverse effects on cytocompatibility.

Resumo em Inglês:

Abstract Objectives: This study aimed to verify the presence of polyomavirus BK (BKPyV) in the saliva of kidney transplant recipients and to correlate it with blood viremia. Material and Methods: We have conducted a cross-sectional study with a sample involving 126 renal transplant recipients. 126 samples of saliva and 52 samples of blood were collected from these patients. Detection and quantification of BKPyV were performed using a real-time PCR. To compare the presence of BKPyV in blood and saliva, the binomial proportion test was used. To verify associations between salivary shedding BKPyV and post-transplant periods (in months), the Mann-Whitney test was used. Spearman's correlation was used to correlate the viral load in the saliva with blood of kidney transplant recipients. Results: The mean age of the study group was 51.11±12.45 years old, and 69 participants (54.8%) were female, with a mean post-transplantation time of 4.80±6.04 months. BKPyV was quantified in several samples of saliva and blood, with medians of 1,108 cp/mL and 1,255 cp/mL, respectively. Only 16/52 (30.8%) participants presented BKPyV in blood, and 59/126 (46.8%) excreted the virus in saliva (p=0.004). BKPyV shedding was found in patients at a shorter post-transplantation period (3.86±5.25, p=0.100). A weak correlation was observed between viral quantification in saliva and blood (Spearman's correlation coefficient=0.193). Conclusion: The results of this study suggested that, although saliva excretes more BKPyV than blood, there is no reliable correlation between salivary shedding and blood viremia, showing two independent compartments of viral replication.

Resumo em Inglês:

Abstract Pain due to administration of local anesthetics is the primary reason for patients' fear and anxiety, and various methods are used to minimize it. This study aimed to measure the degree of pain during administration of anesthesia and determine the latency time and duration of pulpal anesthesia using two anesthetic methods in the maxilla. Materials and Methods: A randomized, single-blind, split-mouth clinical trial was conducted with 41 volunteers who required class I restorations in the maxillary first molars. Local anesthesia was administered with a needleless jet injection system (experimental group) or with a carpule syringe (control) using a 30-gauge short needle. The method of anesthesia and laterality of the maxilla were randomized. A pulp electric tester measured the latency time and duration of anesthesia in the second molar. Visual analogue scale (VAS) was used to measure the degree of pain during the anesthetic method. Data were tabulated and then analyzed by a statistician. The t-test was used to analyze the differences between the groups for basal electrical stimulation. Duration of anesthesia and degree of pain were compared using the Mann-Whitney test. A 5% significance level was considered. Results: There was no statistical difference in the basal electrical stimulation threshold (mA) and degree of pain between the two methods of anesthesia (p>0.05). Latency time was 2 minutes for all subjects. The duration of pulpal anesthesia showed no statistical difference (minutes) between the two methods (p<0.001), with a longer duration for the traditional method of anesthesia (median of 40 minutes). Conclusions: The two anesthetics methods did not differ concerning the pain experienced during anesthesia. Latency lasted 2 minutes for all subjects; the traditional infiltration anesthesia resulted in a longer anesthetic duration compared with the needleless jet injection.

Resumo em Inglês:

Abstract The standardization of in situ protocols for dental erosion is important to enable comparison between studies. Objective: Thus, the objectives of this study were to evaluate the influence of the location of in situ intraoral appliance (mandibular X palatal) on the extent of enamel loss induced by erosive challenges and to evaluate the comfort of the appliances. Material and Methods: One hundred and sixty bovine enamel blocks were selected according to their initial surface hardness and randomly divided into two groups: GI - palatal appliance and GII - mandibular appliance. Twenty volunteers wore simultaneously one palatal appliance (containing 4 enamel blocks) and two mandibular appliances (each one containing 2 enamel blocks). Four times per day during 5 days, the volunteers immersed their appliances in 0.01 M hydrochloric acid for 2 minutes, washed and reinserted them into the oral cavity for 2 hours until the next erosive challenge. After the end of the in situ phase, the volunteers answered a questionnaire regarding the comfort of the appliances. The loss of tissue in the enamel blocks was determined profilometrically. Data were statistically analyzed by paired t-test, Chi-square and Fisher's Exact Test (p<0.05). Results: The enamel blocks allocated in palatal appliances (GI) presented significantly higher erosive wear when compared to the blocks fixed in mandibular appliances (GII). The volunteers reported more comfort when using the palatal appliance. Conclusions: Therefore, the palatal appliance is more comfortable and resulted in higher enamel loss compared to the mandibular one.

Resumo em Inglês:

Abstract Objective: This study aims to evaluate the clinical and biochemical (oxidative stress and pro-inflammatory mediators) effects of the gaseous ozone use accompanied by scaling and root planning (SRP) in periodontal treatment. Material and Methods: The study population consisted of 40 patients with chronic periodontitis (CP) randomly sorted into two groups of 20. The experimental group received SRP plus 3 watts gaseous ozone in two separate applications five days apart, whereas the control group received SRP plus placebo. Clinical periodontal parameters were assayed and saliva samples were taken before the initial and one month after the second treatment. Periodontal examination assessed plaque index (PI), gingival index (GI), probing depth, and clinical attachment level (CAL). Total antioxidant status (TAS), total oxidant status (TOS), nitric oxide (NO), 8-hydroxy-2'-deoxyguanosine (8-OHdG), myeloperoxidase (MPO), glutathione (GSH), malondialdehyde (MDA), and transforming growth factor-beta (TGF-β) levels were evaluated from saliva samples. Results: Changes following treatment in PI, GI, probing depth, and CAL scores were similar for both groups (p>0.05). Of note, TGF-β levels were observed to be higher in the treatment group than in controls (p<0.05). Changes in 8-OHdG, TAS, TOS, NO, MPO, GSH and MDA levels, however, were not significantly different between groups (p>0.05). Conclusion: The findings of this study indicate that SRP plus gaseous ozone versus SRP alone does not correlate to a significant improvement in periodontal recovery.

Resumo em Inglês:

Abstract The efficacy of whitening toothpastes is questionable and controversial. Clinicians, patients and researchers have expressed concern with whitening toothpastes due to the risk of wearing the dental structure and the potential for disappointment if the advertised cosmetic results are not achieved. Objective: This study compared the whitening performance of toothpastes with different whitening technologies after initial and continued use. Material and Methods: Ninety bovine incisors were stained using a concentrated solution of black tea. They were randomly distributed into 6 groups, according to the toothpaste whitening technology: activated charcoal (B&W), blue covarine (WAD), hydrogen peroxide (LWA), microbeads (Oral B 3D White Perfection – 3DW) and optimized abrasives (XW4D). They were compared to a traditional toothpaste without a whitening agent (TA – control). Specimens underwent a brushing machine with controlled pressure, time and temperature. A calibrated examiner measured the color using a VITA-Classical scale before the first brushing cycle (T0), after the first brushing cycle (TI), and after a brushing cycle that simulates continuous use (TCU). Whitening performance was evaluated by the difference of shades (ΔSGU) between T0–TI and T0–TCU timepoints, using the Kruskal-Wallis and Dunn's non-parametric test. The Wilcoxon test was used to evaluate the cumulative effect (α=0.05). Results: Statistically significant differences were observed between toothpastes in both TI and TCU (p<0.05). The time of use also had a significant effect (p<0.05). Conclusion: Only WAD and 3DW showed whitening performance after the first use (TI). The greatest whitening performance after continuous use was obtained by WAD, followed by LWA and 3DW. The use of conventional toothpaste (TA) promotes no tooth whitening. Clinical relevance: Microbead abrasives (3DW) and blue covarine (WAD) were the active technology tested that presented the best global tooth whitening performance.

Resumo em Inglês:

Abstract Sources of calcium and phosphate have been added to dental restorative materials to improve their anticaries effect. Objective This study evaluated the effect of adding calcium glycerophosphate (CaGP) to resin-modified glass ionomer cement (RMGIC) on the physico-mechanical properties, ion release, and enamel demineralization. Material and Methods: Specimens were fabricated for each experimental group: RMGIC without CaGP (Control), RMGIC with 1, 3 and 9% CaGP. To determine the release of fluoride (F), calcium (Ca) and phosphorus (P), six specimens were immersed in demineralization and remineralization solutions for 15 days. In another experimental trial, the following physico-mechanical properties were evaluated at time intervals of 1 and 7 days after fabrication: compressive strength (n=12), diametral tensile strength (n=12), surface hardness of material (n=6) and the degree of conversion of monomers (n=8). To study enamel demineralization, specimens (n=12) were attached to enamel blocks and submitted to pH-cycling. Subsequently, surface and cross-sectional hardness and the concentration of F, Ca and P in enamel were determined. Results The addition of CaGP to RMGIC led to higher mean release of F, Ca and P when compared with control (p<0.001). Mechanical properties were within the range of those of the ionomer cements after addition of 1% and 3% CaGP. The degree of conversion did not differ between groups at the 1st and the 7th day (p>0.439). The addition of 3% and 9% CaGP reduced mineral loss and increased F, Ca and P in the enamel when compared with control (p<0.05). Conclusion The addition of 3% CaGP in RMGIC increased the release of F, P and Ca, reduced enamel demineralization, and maintained the physico-mechanical properties within the parameters for this material.

Resumo em Inglês:

Abstract Objective The aim of this study was to evaluate the effects of gliclazide on oxidative stress, inflammation, and bone loss in an experimental periodontal disease model. Material and Methods Male albino Wistar rats were divided into no ligature, ligature, and ligature with 1, 5, and 10 mg/kg gliclazide groups. Maxillae were fixed and scanned using micro-computed tomography to quantify linear and bone volume/tissue volume (BV/TV) and volumetric bone loss. Histopathological, immunohistochemical and immunofluorescence analyses were conducted to examine matrix metalloproteinase-2 (MMP-2), cyclooxygenase 2 (COX-2), cathepsin K, members of the receptor activator of the nuclear factor kappa-Β ligand (RANKL), receptor activator of nuclear factor kappa-Β (RANK), osteoprotegerin (OPG) pathway, macrophage migration inhibitory factor (MIF), superoxide dismutase-1 (SOD-1), glutathione peroxidase-1 (GPx-1), NFKB p 50 (Cytoplasm), NFKB p50 NLS (nuclear localization signal), PI3 kinase and AKT staining. Myeloperoxidase activity, malondialdehyde and glutathione levels, while interleukin-1 beta (IL-1β) and tumor necrosis factor-alpha (TNF-α) levels were evaluated by spectroscopic ultraviolet-visible analysis. A quantitative reverse transcription polymerase chain reaction was used to quantify the gene expression of the nuclear factor kappa B p50 subunit (NF-κB p50), phosphoinositide 3-kinase (PI3k), protein kinase B (AKT), and F4/80. Results Micro-computed tomography showed that the 1 mg/kg gliclazide treatment reduced linear bone loss compared to the ligature, 5 mg/kg gliclazide, and 10 mg/kg gliclazide treatments. All concentrations of gliclazide increased bone volume/tissue volume (BV/TV) compared to the ligature group. Treatment with 1 mg/kg gliclazide reduced myeloperoxidase activity, malondialdehyde, IL-1β, and TNF-α levels (p≤0.05), and resulted in weak staining for COX-2, cathepsin k, MMP-2, RANK, RANKL, SOD-1, GPx-1,MIF and PI3k. In addition, down-regulation of NF-κB p50, PI3k, AKT, and F4/80 were observed, and OPG staining was strong after the 1 mg/kg gliclazide treatment. Conclusions This treatment decreased neutrophil and macrophage migration, decreased the inflammatory response, and decreased bone loss in rats with ligature-induced periodontitis.

Resumo em Inglês:

Abstract Objectives To study the fluoride uptake and release properties of glass carbomer dental cements and compare them with those of conventional and resin-modified glass ionomers. Materials and Methods Three materials were used, as follows: glass carbomer (Glass Fill), conventional glass ionomer (Chemfil Rock) and resin-modified glass ionomer (Fuji II LC). For all materials, specimens (sets of six) were matured at room temperature for time intervals of 10 minutes, 1 hour and 6 weeks, then exposed to either deionized water or sodium fluoride solution (1000 ppm in fluoride) for 24 hours. Following this, all specimens were placed in deionized water for additional 24 hours and fluoride release was measured. Results Storage in water led to increase in mass in all cases due to water uptake, with uptake varying with maturing time and material type. Storage in aqueous NaF led to variable results. Glass carbomer showed mass losses at all maturing times, whereas the conventional glass ionomer gained mass for some maturing times, and the resin-modified glass ionomer gained mass for all maturing times. All materials released fluoride into deionized water, with glass carbomer showing the highest release. For both types of glass ionomer, uptake of fluoride led to enhanced fluoride release into deionized water. In contrast, uptake by glass carbomer did not lead to increased fluoride release, although it was substantially higher than the uptake by both types of glass ionomer. Conclusions Glass carbomer resembles glass ionomer cements in its fluoride uptake behavior but differs when considering that its fluoride uptake does not lead to increased fluoride release.

Resumo em Inglês:

Abstract Objective The aim of this study was to investigate the cytotoxic effects of modified triple antibiotic paste and an experimental composition using calcium hydroxide on lipoteichoic acid (LTA)-primed apical papilla cells (APC). Material and Methods Human APC were tested for in vitro cytotoxicity of modified Triple Antibiotic Paste (mTAP – Ciprofloxacin, Metronidazole and Cefaclor at 1:1:1) and of a paste of Ciprofloxacin, Metronidazole and Calcium hydroxide (CMC – 1:1:2) and modified CMC (mCMC – 2:2:1) by using MTT assay. The substances were reconstituted in DMEM at 1,000 µg/mL and ¼ serially diluted before being kept in contact with cells for 1, 3, 5 and 7 days. Further, cells were primed with 1 µg/mL of Enterococcus faecalis LTA for 7 days prior to the viability test with 1,000 µg/mL of each substance. Statistical analysis was performed using one-way analysis of variance (ANOVA) and two-way ANOVA respectively followed by Tukey’s post-test. Significance levels were set at p<0.05. Results In the first assay, the higher cytotoxic rates were reached by mTAP for all experimental periods. CMC was found toxic for APC at 5 and 7 days, whereas mCMC did not affect the cell viability. Only CMC and mCMC were able to induce some cellular proliferation. In the second assay, when considering the condition with medium only, LTA-primed cells significantly proliferated in comparison to LTA-untreated ones. At this context, mTAP and CMC showed similar cytotoxicity than the observed for LTA-untreated cells, while mCMC was shown cytotoxic at 7 days only for LTA-primed APC. Comparing the medications, mTAP was more cytotoxic than CMC and mCMC. Conclusion mTAP showed higher cytotoxicity than CMC and mCMC and the effect of topic antimicrobials might differ when tested against apical papilla cells under physiological or activated conditions.

Resumo em Inglês:

Abstract Objective The aim of this study was to evaluate the levels of salivary biomarkers IL-1β, IL-10, RANK, OPG, MMP-2, TG-β and TNF-α in individuals with diagnosis of peri-implant mucositis in the absence or presence of periodontal and peri-implant maintenance therapy (TMPP) over 5 years. Material and Methods Eighty individuals diagnosed with peri-implant mucositis were divided into two groups: one group that underwent periodontal and peri-implant regularly maintenance therapy, called GTP (n=39), and a second group that received no regular maintenance GNTP (n=41). Each participant underwent a complete periodontal and peri-implant clinical examination. Collection of saliva samples and radiographic examination to evaluate peri-implant bone levels were conducted at two times: initial examination (T1) and after 5 years (T2). The salivary samples were evaluated through ELISA for the following markers: IL-1β, IL-10, RANK, OPG, MMP-2, TGF and TNF-α. Results A higher incidence of peri-implantitis was observed in the GNTP group (43.9%) than in the GTP group (18%) (p=0.000). All individuals (n=12) who presented peri-implant mucositis and had resolution at T2 were in the GTP group. After 5 years, there was an increase in the incidence of periodontitis in the GNTP group compared to the GTP group (p=0.001). The results of the study revealed an increase in the salivary concentration of TNF-α in the GNTP group compared to the GTP group. The other salivary biomarkers that were evaluated did not show statistically significant differences between the two groups. Conclusions The salivary concentration of TNF-α was increased in individuals with worse periodontal and peri-implant clinical condition and in those with a higher incidence of peri-implantitis, especially in the GNTP group. Longitudinal studies in larger populations are needed to confirm these findings and elucidate the role of this biomarker in peri-implant disease.

Resumo em Inglês:

Abstract Bone morphogenetic protein type 2 (BMP-2) and retinoic acid (RA) are osteoinductive factors that stimulate endogenous mechanisms of bone repair which can be applied on management of osseous defects in oral and maxillofacial fields. Objective Considering the different results of RA on osteogenesis and its possible use to substitute/potency BMP-2 effects, this study evaluated the outcomes of BMP-2, RA, and BMP-2+RA treatments on in vitro osteogenic differentiation of human adipose-derived stem cells (ASCs) and the signaling pathway(s) involved. Material and Methods ASCs were treated every other day with basic osteogenic medium (OM) alone or supplemented with BMP-2, RA, or BMP-2+RA. Alkaline phosphatase (ALP) activity was determined using the r-nitrophenol method. Extracellular matrix mineralization was evaluated using von Kossa staining and calcium quantification. Expression of osteonectin and osteocalcin mRNA were determined using qPCR. Smad1, Smad4, phosphorylated Smad1/5/8, BMP-4, and BMP-7 proteins expressions were analyzed using western blotting. Signaling pathway was evaluated using the IPA® software. Results RA promoted the highest ALP activity at days 7, 14, 21, and 28, in comparison to BMP-2 and BMP-2+RA. BMP-2+RA best stimulated phosphorylated Smad1/5/8 protein expression at day 7 and Smad4 expression at days 7, 14, 21, and 28. Osteocalcin and osteonectin mRNA expressions were best stimulated by BMP-2+RA at day 7. Matrix mineralization was most improved by BMP-2+RA at days 12 and 32. Additionally, BMP-2+RA promoted the highest BMP signaling pathway activation at days 7 and 14, and demonstrated more activation of differentiation of bone-forming cells than OM alone. Conclusions In summary, RA increased the effect of BMP-2 on osteogenic differentiation of human ASCs.

Resumo em Inglês:

Abstract Previous studies suggested that mastication activity can affect learning and memory function. However, most were focused on mastication impaired models by providing long-term soft diet. The effects of chewing food with various hardness, especially during the growth period, remain unknown. Objective: To analyze the difference of hippocampus function and morphology, as characterized by pyramidal cell count and BDNF expression in different mastication activities. Materials and Methods: 28-day old, post-weaned, male-Wistar rats were randomly divided into three groups (n=7); the first (K0) was fed a standard diet using pellets as the control, the second (K1) was fed soft food and the third (K2) was fed hard food. After eight weeks, the rats were decapitated, their brains were removed and placed on histological plates made to count the pyramid cells and quantify BDNF expression in the hippocampus. Data collected were compared using one-way ANOVA. Results: Results confirmed the pyramid cell count (K0=169.14±27.25; K1=130.14±29.32; K2=128.14±39.02) and BDNF expression (K0=85.27±19.78; K1=49.57±20.90; K2=36.86±28.97) of the K0 group to be significantly higher than that of K1 and K2 groups (p<0.05); no significant difference in the pyramidal cell count and BNDF expression was found between K1 and K2 groups (p>0.05). Conclusion: A standard diet leads to the optimum effect on hippocampus morphology. Food consistency must be appropriately suited to each development stage, in this case, hippocampus development in post-weaned period.

Resumo em Inglês:

Abstract The tongue is one of the primary sources of halitosis. The manual or mechanical removal of biofilm is known to decrease oral malodor. Objective: To evaluate a new tongue hygiene technique hereby referred to as “the X technique” and its effects on both halitosis and the number of microorganisms based on microbiological parameters and diagnostic features of the breath. Material and Methods: The study included thirty patients divided into a control group (patients without systematized guidelines of lingual hygiene, but who performed the mechanical cleaning of tongue dorsum, each in its own way), the 3R group (instructed to perform the movements of the X technique for 3 repetitions at each brushing), and the 6R group (instructed to perform 6 repetitions of the technique at each brushing). After two weeks, a new data collection was performed. Results: Patients in the 6R group presented the lowest score on the organoleptic assessment scale at the second consultation, followed by the 3R group and the controls. Regarding the self-perception of breath by the method of Visual Analog Scale (VAS), the control group did not perceive improvements in oral malodor; the results of the 3R group and the 6R group were similar. Conclusion: These results indicate that the X technique improves both measurements and perceptions of halitosis. Microbiological analyses revealed greatest reduction in the 6R group. The findings show that the X technique reduces both organoleptic scores and the number of bacterial colonies, and improves users’ perceptions of their breath.

Resumo em Inglês:

Abstract Amelogenesis imperfecta (AI) is a group of enamel development disorders that alter the structure and chemical composition of the tissue. There is great variability in the clinical presentation; according to Witkop, AI can be categorized into 14 subtypes, which makes its diagnosis extremely complex. Objective: This study aimed to describe and determine the frequency of clinical and radiographic features and inheritance patterns found in 41 Chilean families diagnosed with diverse types of AI. Material and Methods: We analyzed the clinical records, photographs, pedigrees and radiographs of 121 individuals recruited between 2003 and 2016. All of the information was included in a database that was analyzed using the application Stata 14. Results: The 72 affected individuals had average age of 16 years, and no sex association with the presence of AI was found. The most frequent clinical subtypes were as follows: 43% hypomature, 25% hypoplastic, 21% hypomature/hypoplastic, 7% hypocalcified and 4% hypocalcified/hypoplastic. The number of severely affected teeth was 22, which occurred in the patients with hypocalcified and hypocalcified/hypoplasic AI who presented the highest number of damaged teeth. Caries and periodontal disease were found in 47 and 32% of the patients, respectively. Malocclusions were observed in 43% of the individuals with AI, with open bite being the most frequent. Radiographically, the thickness of the enamel decreased in 51% of the patients, and 80% showed decreased radiopacity of the enamel compared to that of dentin. Autosomal dominant inheritance pattern was found in 37% of the families with hypoplastic AI, and autosomal recessive pattern was present in 56% of the other clinical subtypes, but more frequently in those affected with hypomature and hypocalcified AI. Conclusion: Of the five clinical subtypes, autosomal recessive hypomature, autosomal dominant hypoplastic and autosomal recessive hypomature/hypoplastic AI were the most prevalent subtypes in this group.

Resumo em Inglês:

Abstract Objectives: To evaluate the radiopacity of Biodentine (BD) and BD associated with 15% calcium tungstate (BDCaWO4) or zirconium oxide (BDZrO2), by using conventional and digital radiography systems, and their physicochemical and biological properties. Materials and Methods: Radiopacity was evaluated by taking radiographs of cement specimens (n=8) using occlusal film, photostimulable phosphor plates or digital sensors. Solubility, setting time, pH, cytocompatibility and osteogenic potential were also evaluated. Data were analyzed using one-way ANOVA and Tukey post-test or two-way ANOVA and Bonferroni post-test (α=0.05). Results: BD radiopacity was lower than 3 mm Al, while BD ZrO2 and BD CaWO4 radiopacity was higher than 3 mm Al in all radiography systems. The cements showed low solubility, except for BDCaWO4. All cements showed alkaline pH and setting time lower than 34 minutes. MTT and NR assays revealed that cements had greater or similar cytocompatibility in comparison with control. The ALP activity in all groups was similar or greater than the control. All cements induced greater production of mineralized nodules than control. Conclusions: Addition of 15% ZrO2 or CaWO4 was sufficient to increase the radiopacity of BD to values higher than 3 mm Al. BD associated with radiopacifiers showed suitable properties of setting time, pH and solubility, except for BDCaWO4, which showed the highest solubility. All cements had cytocompatibility and potential to induce mineralization in Saos-2 cells. The results showed that adding 15% ZrO2 increases the radiopacity of BD, allowing its radiography detection without altering its physicochemical and biological properties.

Resumo em Inglês:

Abstract Objective This study aimed to evaluate the inflammatory effect and bone formation in sterile surgical failures after implantation of a collagen sponge with mesenchymal stem cells from human dental pulp (hDPSCs) and Aloe vera. Material and Methods Rattus norvegicus (n=75) were divided into five experimental groups according to treatment: G1) control (blood clot); G2) Hemospon®; G3) Hemospon® in a culture medium enriched with 8% Aloe vera; G4) Hemospon® in a culture medium containing hDPSCs and G5) Hemospon® in a culture medium enriched with 8% Aloe vera and hDPSCs. On days 7, 15 and 30, the animals were euthanized, and the tibia was dissected for histological, immunohistochemistry and immunofluorescence analyses. The results were analyzed using nonparametric Kruskal-Wallis test and Dunn’s post-test. Results On days 7 and 15, the groups with Aloe vera had less average acute inflammatory infiltrate compared to the control group and the group with Hemospon® (p<0.05). No statistically significant difference was found between the groups regarding bone formation at the three experimental points in time. Osteopontin expression corroborated the intensity of bone formation. Fluorescence microscopy revealed positive labeling with Q-Tracker® in hDPSCs before transplantation and tissue repair. Conclusion The results suggest that the combination of Hemospon®, Aloe vera and hDPSCs is a form of clinical treatment for the repair of non-critical bone defects that reduces the inflammatory cascade’s effects.

Resumo em Inglês:

Abstract Porphyromonas gingivalis is one of the most important Gram-negative anaerobe bacteria involved in the pathogenesis of periodontitis. P. gingivalis has an arsenal of specialized virulence factors that contribute to its pathogenicity. Among them, fimbriae play a role in the initial attachment and organization of biofilms. Different genotypes of fimA have been related to length of fimbriae and pathogenicity of the bacterium. Objectives The aim of this study was to identify 5 types of fimA genotype strains in smokers and nonsmokers with periodontitis, before and after periodontal therapy. Material and Methods Thirty-one patients with periodontitis harboring P. gingivalis were selected: 16 nonsmokers (NS) and 15 smokers (SM). Clinical and microbiological parameters were evaluated at baseline and 3 months after periodontal treatment, namely: plaque index, bleeding on probe, probing depth, gingival recession and clinical attachment level. The frequency of P. gingivalis and fimA genotype strains were determined by polymerase chain reaction. Results Type I fimA was detected in the majority of SM and NS at baseline, and the frequency did not diminish after 3 months of treatment. The frequency of type II genotype was higher in SM than NS at baseline. After 3 months, statistical reduction was observed only for types II and V fimA genotypes in SM. The highest association was found between types I and II at baseline for NS (37.5%) and SM (53.3%). Conclusion The most prevalent P. gingivalis fimA genotypes detected in periodontal and smoker patients were genotypes I and II. However, the presence of fimA genotype II was higher in SM. Periodontal treatment was effective in controlling periodontal disease and reducing type II and V P. gingivalis fimA.

Resumo em Inglês:

Abstract Objective The aim of this randomized, controlled, prospective clinical trial was to evaluate the performances of two different universal adhesives and one etch-rinse adhesive for restoration of non-carious cervical lesions (NCCLs). Material and Methods Twenty patients with at least seven NCCLs were enrolled. Lesions were divided into seven groups according to adhesive systems and application modes: GSE: GLUMA Universal-self-etch, GSL: GLUMA Universal-selective etching, GER: GLUMA Universal-etch-and-rinse, ASE: All-Bond Universal-self-etch, ASL: All-Bond Universal-selective etching, AER: All-Bond Universal-etch-and-rinse, SBE (Control): Single Bond2-etch-and-rinse. A total of 155 NCCLs were restored with a nano hybrid composite (Tetric N-Ceram). Restorations were scored with regard to retention, marginal discoloration, marginal adaptation, recurrent caries and post-operative sensitivity using modified United States Public Health Service (USPHS) criteria after one week, 6, 12 and 24 months. Statistical evaluations were performed using Chi-square tests (p=0.05). Results The recall rate was 81.9% after the 24-month follow-up. The cumulative retention rates for self-etch groups (GSE: 72.2%, ASE:75%) were significantly lower than other experimental groups (GSL: 93.7%, GER: 100%, ASL: 94.1%, AER: 100%, SBE: 100%) at the 24-month follow-up (p<0.05). Regarding marginal adaptation and marginal discoloration, GSE and ASE groups demonstrated more bravo scores after 6 and 12-month observations but differences were not significant (p>0.05). Only one restoration from ASL group demonstrated post-operative sensitivity at 6 and 12-month observations. No secondary caries was observed on the restorations at any recall. At the end of 24-month observations, no significant differences were detected among groups regarding any of the criteria assessed, except retention. Conclusion GLUMA Universal and All-Bond Universal showed better results in etch-and-rinse and selective etching mode compared to the self-etch mode regarding retention. Etch-and-rinse and selective etching application modes of the current universal adhesives tended to provide better clinical outcomes considering the criteria evaluated at the end of 24-month evaluation.

Resumo em Inglês:

Abstract Endodontic revascularization is based on cell recruitment into the necrotic root canal of immature teeth after chemical disinfection. The clinical outcome depends on the ability of surviving cells from the apical tissue to differentiate and promote hard tissue deposition inside the dentinal walls. Objective To investigate the effect of calcium hydroxide (CH) and modified triple antibiotic paste (mTAP – ciprofloxacin, metronidazole and cefaclor) on the viability and mineralization potential of apical papilla cells (APC) in vitro . Material and Methods APC cultures were kept in contact with CH or mTAP (250-1000 µg/mL) for 5 days, after which cell viability was assessed using 3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay. Next, APCs were subjected to CH or mTAP at 250 µg/mL for 5 days before inducing the differentiation assay. After 14 and 21 days, calcium deposition was assessed by the Alizarin Red S staining method, followed by elution and quantification using spectrophotometry. Data were analyzed using ANOVA followed by Tukey post hoc test. Results CH induced cell proliferation, whereas mTAP showed significant cytotoxicity at all concentrations tested. APC treated with CH demonstrated improved mineralization capacity at 14 days, while, for mTAP, significant reduction on the mineralization rate was observed for both experimental periods (14 and 21 days). Conclusion Our findings showed that CH induces cell proliferation and improves early mineralization, whereas mTAP was found cytotoxic and reduced the mineralization potential in vitro of APCs.

Resumo em Inglês:

Abstract Objectives Enamel demineralization is among the main topics of interest in the orthodontic field. Self-ligating brackets have been regarded as advantageous in this aspect. The aim of this study was to evaluate the break homeostasis in the oral environment and the levels of microorganisms associated with dental caries among the different types of brackets. Material and Methods Twenty patients received two self-ligating brackets: In-Ovation®R, SmartClipTM, and one conventional GeminiTM. Saliva was collected before bonding (S0), 30 (S1) and 60 (S2) days after bonding. One sample of each bracket was removed at 30 and 60 days for the in situ analysis. Checkerboard DNA-DNA Hybridization was employed to evaluate the levels of microbial species as-sociated with dental caries. Data were evaluated by nonparametric Friedman and Wilcoxon tests at 5% significance level. Results The salivary levels of L. casei (p=0.033), S. sobrinus (p=0.011), and S. sanguinis (p=0.004) increased in S1. The in situ analyses showed alteration in S. mutans (p=0.047), whose highest levels were observed to the In-Ovation®R. Conclusions The orthodontic appliances break the salivary homeostasis of microorganisms involved in dental caries. The contamination pattern was different between self-ligating and conventional brackets. The In-Ovation®R presented worse performance considering the levels of cariogenic bacterial species.

Resumo em Inglês:

Abstract Objective To assess pulp oxygen saturation levels (SaO2) in maxillary central incisors after dental bleaching. Materials and Methods 80 participants (160 teeth) were randomly allocated to four groups: G1 In-office bleaching with two applications of 35% hydrogen peroxide (HP) (20 minutes), followed by at-home bleaching with 10% carbamide peroxide (CP) (2 hours/day for 16 days); G2 - Same protocol as G1, plus desensitizing toothpaste; G3 - In-office bleaching with 35% HP and one application of placebo gel (20 minutes), followed by at-home bleaching with 10% CP (2 hours/day for 16 days); and G4 - Same protocol as G3, plus desensitizing toothpaste. Pulp SaO2 levels were measured before (T0) and immediately after (T1) in-office bleaching; on the 5th (T2), 8th (T3), 12th (T4), and 16th days of at-home bleaching (T5); and on the 7th (T6) and 30th (T7) days. Mean (SD) pulp SaO2 levels were compared within groups by generalized estimating equations (GEE) and Student’s t-test (P<0.05). Results Mean pulp SaO2 at T0 was 84.29% in G1, 84.38% in G2, 84.79% in G3, and 85.83% in G4. At T1, these values decreased to 81.96%, 82.06%, 82.19%, and 81.15% in G1, G2, G3, and G4 respectively, with significant difference in G4 (P<0.05). During home bleaching, pulp SaO2 levels varied in all groups, with 86.55%, 86.60%, 85.71%, and 87.15% means at T7 for G1, G2, G3, and G4, respectively; G2 presented significant difference (P<0.05). Conclusions Pulp SaO2 level in maxillary central incisors was similar at baseline, reducing immediately after in-office bleaching, regardless of using desensitizing toothpaste and increasing at 30 days after dental bleaching.

Resumo em Inglês:

Abstract Objective This study aims to evaluate the effect of sonochemical treatment on the surface of yttria-stabilized tetragonal zirconia (Y-TZP) before and after the final sintering. Material and Methods Twenty-eight Y-TZP discs were divided into four groups (n=7), according to surface treatment: PRE: pre-sintering sonication with 30% nominal power for 15 min; POS: post-sintering sonication with 30% nominal power for 15 min; JAT: air abrasion with 50-μm alumina particles; and CON: control group with no treatment. The POS and JAT groups were sintered before sonication and the PRE group after sonication. Surface roughness was analyzed using confocal microscopy, after which resin cement cylinders were placed on the surface of the Y-TZP discs and subjected to mechanical microshear bond strength test until fracture. Surface roughness and microshear bond strength values underwent ANOVA and the Tukey tests. Results The surface roughness values for the PRE group (299.91 nm) and the POS group (291.23 nm) were not significantly different (p≥0.05), statistically, and the surface roughness value of the JAT group (925.21 nm) was higher than those of PRE and POS (p=0.007) groups. The mechanical microshear bond strength test showed that there was no statistically significant difference between the groups (p=0.08). Conclusions Therefore, the results showed that sonochemical treatment modifies the Y-TZP surface and is similar to the well-established sandblasting surface treatment regarding the strength of the bond with the resin cement.

Resumo em Inglês:

Abstract Objective: The aim of this in vitro study was to determine the effects of remineralization promoting agents containing casein phosphopeptide-stabilized amorphous calcium phosphate (CPP-ACP), or CPP-ACP in combination with fluoride (CPP-ACPF) on artificial white spot lesions (WSLs) after 6 and 12 weeks. Methodology: White spot lesions were created on 123 sectioned premolars (246 specimens) with a demineralization solution during a 96 hours pH-cycling regime. Two experimental groups were created: a CPP-ACP group (Tooth Mousse™), and a CPP-ACPF group (Mi Paste Plus™). Additionally, two control groups were created, one using only a conventional toothpaste (1450 ppm fluoride) and another one without any working agents. All teeth were also daily brushed with the conventional toothpaste except the second control group. Tooth Mousse™ and Mi Paste Plus™ were applied for 180 seconds every day. The volume of demineralization was measured with transverse microradiography. Six lesion characteristics regarding the lesion depth and mineral content of WSLs were also determined. Results: The application of CPP-ACP and CPP-ACPF had a significant regenerative effect on the WSLs. Compared to Control group 1 and 2 the volume of demineralization after 6 weeks decreased significantly for CPP-ACP (respectively p<0.001 and p<0.001) and CPP-ACPF (respectively p=0.001 and p=0.003). The same trend was observed after 12 weeks. For the CPP-ACPF group, WSL dimensions decreased significantly between 6 and 12 weeks follow-up (p=0.012). The lesion depth reduced significantly after application of CPP-ACP and CPP-ACPF but increased significantly in the Control groups. Mineral content increased for CPP-ACP and CPP-ACPF after an application period of 12 weeks, but this was only significant for CPP-ACP. Conclusions: Long-term use of CPP-ACP and CPP-ACPF in combination with a conventional tooth paste shows beneficial effects in the recovery of in vitro subsurface caries lesions.

Resumo em Inglês:

Abstract Objectives: To measure and compare in vivo and in vitro pulp temperature (PT) increase (ΔTEMP) over baseline, physiologic temperature using the same intact upper premolars exposed to the same Polywave® LED curing light. Methodology: After local Ethics Committee approval (#255,945), local anesthesia, rubber dam isolation, small occlusal preparations/minute pulp exposure (n=15) were performed in teeth requiring extraction for orthodontic reasons. A sterile probe of a temperature measurement system (Temperature Data Acquisition, Physitemp) was placed within the pulp chamber and the buccal surface was sequentially exposed to a LED LCU (Bluephase 20i, Ivoclar Vivadent) using the following exposure modes: 10-s low or high, 5-s Turbo, and 60-s high. Afterwards, the teeth were extracted and K-type thermocouples were placed within the pulp chamber through the original access. The teeth were attached to an assembly simulating the in vivo environment, being similarly exposed while real-time temperature (°C) was recorded. ΔTEMP values and time for temperature to reach maximum (ΔTIME) were subjected to two-way ANOVA and Bonferroni's post-hoc tests (pre-set alpha 0.05). Results: Higher ΔTEMP was observed in vitro than in vivo. No significant difference in ΔTIME was observed between test conditions. A significant, positive relationship was observed between radiant exposure and ΔTEMP for both conditions (in vivo: r2=0.917; p<0.001; in vitro: r2=0.919; p<0.001). Conclusion: Although the in vitro model overestimated in vivo PT increase, in vitro PT rise was close to in vivo values for clinically relevant exposure modes.

Resumo em Inglês:

Abstract Objective: The aim of this study was to investigate possible malformations in the soft, bone and/or dental tissues in patients with congenital Zika Virus (ZIKV) by clinical and x-ray evaluation. Methodology: Thirty children born with ZIKV and 30 children born without ZIKV (control group) were included in the study. Patients were evaluated over 24 consecutive months according to the variables: sex, age, cleft palates, soft tissue lesions, alveolar ridge hyperplasia, short labial and lingual frenums, inadequate posture of the lingual and perioral muscles at rest, micrognathia, narrow palatine vaults, changes in the teeth shape and/or number, sequence eruption, spasms, seizures and eruption delay were evaluated. Chi-square test, Student's t-test and nominal logistic regression were used (p<0.05). Results: Among the 30 babies examined, the mean age of the first dental eruption was 10.8±3.8 with almost two-thirds of the children (n=18, 60%) experiencing eruptions of their first tooth after 9 months of age, nine children (30%) had inadequate lingual posture at rest, more than half of the children (n=18, 60%) had short labial or lingual frenums. ZIKV babies showed a high prevalence of clef palate (p<0.001), inadequate lingual posture at rest (p=0.004), micrognathia (p=0.002), changes in the shape and/or number of teeth (p=0.006), alteration in sequence of dental eruption (p<0.001) and muscles spasms (p=0.002). The delay eruption was associated with inadequate lingual posture at rest (p=0.047), micrognathia (p=0.002) and changes in the shape and/or number of teeth (p=0.021). The delayed eruption (p=0.006) and narrow palatine vaults (p=0.008) were independently associated with ZIKV. Moreover, female patients showed the most narrow palatine vaults (p=0.010). Conclusions: The children with ZIKV showed a greater tendency to have delayed eruption of the first deciduous tooth, inadequate lingual posture and short labial and lingual frenums.

Resumo em Inglês:

Abstract Objectives: To evaluate the effect of calcium hydroxide (CH) associated with two different vehicles as a capping material for pulp tissue in primary molars, compared with mineral trioxide aggregate (MTA). Methodology: Forty-five primary mandibular molars with dental caries were treated by conventional pulpotomy using one of the following materials: MTA only (MTA group), CH with saline (CH+saline group) and CH with polyethylene glycol (CH+PEG group) (15 teeth/group). Clinical and periapical radiographic examinations of the pulpotomized teeth were performed 3, 6, and 12 months after treatment. Data were tested by chi-squared analysis and a multiple comparison post-test. Results: The MTA group showed both clinical and radiographic treatment success in 14/14 teeth (100%), at all follow-up appointments. By clinical evaluation, no teeth in the CH+saline and CH+PEG groups had signs of mobility, fistula, swelling or inflammation of the surrounding gingival tissue. However, in the CH+saline group, radiographic analysis detected internal resorption in up to 9/15 teeth (67%), and inter-radicular bone resorption and furcation radiolucency in up to 5/15 teeth (36%), from 3 to 12 months of follow-up. In the CH+PEG group, 2/11 teeth (18%) had internal resorption and 1/11 teeth (9%) presented bone resorption and furcation radiolucency at all follow-up appointments. Conclusion: CH with PEG performed better than CH with saline as capping material for pulpotomy of primary teeth. However, both combinations yielded clinical and radiographic results inferior to those of MTA alone.

Resumo em Inglês:

Abstract Polymer-based composite materials have been proposed as an alternative for single unit restorations, due to their resilient and shock absorbing behavior, in contrast to the brittleness of ceramic materials that could result in failure by fracture. Objective: To evaluate the fatigue strength and damage modes of monolithic posterior resin nanoceramic and lithium disilicate glass ceramic crowns. Methodology: Twenty-six resin nanoceramic (RNC) and lithium disilicate glass ceramic (LD) 2 mm monolithic crowns (n=13) were cemented on composite resin replicas of a prepared tooth and subjected to cyclic load with lithium disilicate indenters for 2 million cycles. Specimens and indenters were inspected every 500,000 cycles and suspended when presenting fractures or debonding. Surviving specimens were embedded in epoxy resin, polished and subsurface damage was analyzed. Specimens presenting fractures or severe subsurface damage were considered as failures. Survival data was subjected to Fisher's exact test; damage modes were subjected to Mann-Whitney test (p<0.05). Results: There were no debonding, cohesive or catastrophic failures. Considering subsurface damage, 53.8% of RNC and 46.2% of LD crowns survived the fatigue test, presenting no statistical difference. Chief damage modes were radial cracks for RNC and inner cone cracks for LD, presenting no statistical difference. Conclusions: The results suggest that if debonding issues can be resolved, resin nanoceramic figures can be an alternative to posterior crowns. Although distinct, damage modes revealed potential to cause bulk fracture in both glass ceramic and resin nanoceramic crowns.

Resumo em Inglês:

Abstract Objective: This in vitro study aimed to compare the efficacy of irrigants using various irrigation activation methods to the push-out bond strengths of fiber post to root canal luted with self-adhesive resin cement (SARC). Methodology: Forty-eight decoronated human canines were used. The specimens were divided into four groups corresponding with the post-space irrigation process and were treated as follows: distilled water (DW) (Control) group received 15 mL of DW; sodium hypochlorite (NaOCl)+ethylenediaminetetraacetic acid (EDTA) group was treated with 5 mL of 5.25% NaOCl, 5 mL of 17% EDTA, and 5 mL of DW; passive ultrasonic irrigation (PUI) group was treated with 5 mL of 5.25% NaOCl, 5 mL of 17% EDTA, and 5 mL of DW, and each irrigant was agitated with an ultrasonic file; and laser activated irrigation (LAI) group was treated with 5 mL of 5.25% NaOCl, 5 mL of 17% EDTA, and 5 mL of DW, and each irrigant was irradiated with Nd: YAG laser. Fiber posts were luted with SARC, and a push-out test was performed. Data was analyzed using one-way analysis of variance and Tukey HSD test. Results: The bond strength values for the groups obtained were as follows: Control (10.04 MPa), NaOCl+EDTA (11.07 MPa), PUI (11.85 MPa), and LAI (11.63 MPa). No statistically significant differences were found among all experimental groups (p>0.05). The coronal (12.66 MPa) and middle (11.63 MPa) root regions indicated a significantly higher bond strength compared with the apical (9.16 MPa) region (p<0.05). Conclusions: Irrigant activation methods did not increase the bond strength of fiber post to canal.

Resumo em Inglês:

Abstract Intermaxillary fixation (IMF) is a classic method for immobilization of the mandible after mandibular fractures and corrective surgery. However, it has been suggested that IMF may be a risk for developing temporomandibular joint (TMJ)-related symptoms, especially when applied for longer periods. Objective: To evaluate the clinical function of TMJs and masticatory muscles 10-15 years after mandibular setback surgery and subsequent six weeks of IMF. The patients' self-reported TMJ and masticatory muscle symptoms were also addressed. Methodology: Thirty-six patients (24 women and 12 men) treated with intraoral vertical ramus osteotomies and subsequent six weeks of IMF, underwent a clinical examination of TMJs and masticatory muscles 10-15 years after surgery and completed a five-item structured questionnaire reporting subjective TMJ-related symptoms. Mean age by the time of clinical examination was 34.1 years (range 27.2–59.8 years). The clinical outcome was registered according to the Helkimo clinical dysfunction index. Descriptive and bivariate statistics were performed and level of significance was set to 5%. Results: Mean maximum unassisted mouth opening 10-15 years after surgery was 50.1 mm, (range 38-70 mm, SE 1.2), statistically significantly greater in men compared to women (p=0.004). Mean Helkimo dysfunction group was 1.5 (range 1-3, SE 0.10). Eighty-one percent experienced pain on palpation in either the masseter muscle, temporal muscle or both, and 31% experienced pain when moving the mandible in one or more directions. Thirty-one percent reported pain from palpating the TMJs. In the questionnaire, none reported to have pain during chewing or mouth opening on a weekly or daily basis, but 22% reported difficulties with maximum opening of the mouth. Conclusion: Ten to fifteen years after mandibular setback surgery the patient's mandibular range of movement is good. Despite clinically recognizable symptoms, few patients reported having TMJ- or masticatory muscle-related symptoms in their daily life.

Resumo em Inglês:

Abstract Objectives: The aim of this study was to assess the effect of Myracrodruon urundeuva All. and Qualea grandiflora Mart. leaves hydroalcoholic extracts on viability and metabolism of a microcosm biofilm and on enamel demineralization prevention. Methodology: Microcosm biofilm was produced on bovine enamel using inoculum from pooled human saliva mixed with McBain saliva, under 0.2% sucrose exposure, for 14 days. The biofilm was daily-treated with the extracts for 1 min. At the end, it was analyzed with respect to viability by fluorescence, CFU counting and extracellular polysaccharides (phenol-sulphuric acid colorimetric assay) and lactic acid (enzymatic assay) production. The demineralization was measured by TMR. The data were compared using ANOVA or Kruskal-Wallis (p<0.05). Results: M. urundeuva All. at 100, 10 and 0.1 μg/mL and Q. grandiflora Mart. at 100 and 0.1 μg/mL reduced biofilm viability similarly to positive control (chlorhexidine) and significantly more than the negative-vehicle control (35% ethanol). M. urundeuva at 1000, 100 and 0.1 μg/mL were able to reduce both lactobacilli and mutans streptococci CFU counting, while Q. grandiflora (1000 and 1.0 μg/mL) significantly reduced mutans streptococci CFU counting. On the other hand, the natural extracts were unable to significantly reduce extracellular polysaccharides and lactic acid productions neither the development of enamel carious lesions. Conclusions: The extracts showed antimicrobial properties on microcosm biofilm, however, they had no effect on biofilm metabolism and caries protection.

Resumo em Inglês:

Abstract Objective: Three-dimensional (3D) angular measurements between craniofacial planes pose challenges to quantify maxillary and mandibular skeletal discrepancies in surgical treatment planning. This study aims to compare the reproducibility and reliability of two modules to measure angles between planes or lines in 3D virtual surface models. Methodology: Twenty oriented 3D virtual surface models de-identified and constructed from CBCT scans were randomly selected. Three observers placed landmarks and oriented planes to determine angular measurements of pitch, roll and yaw using (1) 3D pre-existing planes, (2) 3D planes created from landmarks and (3) lines created from landmarks. Inter- and intra-observer reproducibility and repeatability were examined using the Intra-Class Correlation (ICC) test. One observer repeated the measurements with an interval of 15 days. ANOVA was applied to compare the 3 methods. Results: The three methods tested provided statistically similar, reproducible and reliable angular measurements of the facial structures. A strong ICC varying from 0.92 to 1.00 was found for the intra-observer agreement. The inter-observer ICC varied from 0.84 to 1.00. Conclusion: Measurements of 3D angles between facial planes in a common coordinate system are reproducible and repeatable either using 3D pre-existing planes, created based on landmarks or angles between lines created from landmarks.

Resumo em Inglês:

Abstract Objectives: Dental composites release unreacted resin monomers into the oral environment, even after polymerization. Periodontal cells are, therefore, exposed to substances that potentially elicit the immune inflammatory response. The underlying molecular mechanisms associated with the interaction between resin monomers and human immune cells found in the gingival crevicular fluid are not fully understood yet. This study investigated the ability of bisphenol A-glycidyl methacrylate (BISGMA), urethane dimethacrylate (UDMA) and triethylene glycol dimethacrylate (TEGDMA) to induce apoptosis and cytokine release by human leukocytes stimulated with a periodontal pathogen. Methodology: Peripheral blood mononuclear cells (PBMC) from 16 healthy individuals were included in this study. To determine the toxicity, the PBMC were incubated for 20 hours, with monomers, for the analysis of cell viability using MTT assay. To evaluate cell death in the populations of monocytes and lymphocytes, they were exposed to sub-lethal doses of each monomer and of heat-inactivated Porphyromonas gingivalis (P. gingivalis) for 5 hours. Secretions of IL-1β, IL-6, IL-10 and TNF-α were determined by ELISA after 20 hours. Results: UDMA and TEGDMA induced apoptosis after a short-time exposure. Bacterial challenge induced significant production of IL-1β and TNF-α (p<0.05). TEGDMA reduced the bacterial-induced release of IL-1β and TNF-α, whereas UDMA reduced IL-1β release (p<0.05). These monomers did not affect IL-10 and IL-6 secretion. BISGMA did not significantly interfere in cytokine release. Conclusions: These results show that resin monomers are toxic to PBMC in a dose-dependent manner, and may influence the local immune inflammatory response and tissue damage mechanisms via regulation of bacterial-induced IL-1β and TNF-α secretion by PBMC.

Resumo em Inglês:

Abstract Objectives: Infection, inflammation and bone resorption are closely related events in apical periodontitis development. Therefore, we sought to investigate the role of cyclooxygenase (COX) in osteoclastogenesis and bone metabolism signaling in periapical bone tissue after bacterial lipopolysaccharide (LPS) inoculation into root canals. Methodology: Seventy two C57BL/6 mice had the root canals of the first molars inoculated with a solution containing LPS from E. coli (1.0 mg/mL) and received selective (celecoxib) or non-selective (indomethacin) COX-2 inhibitor. After 7, 14, 21 and 28 days the animals were euthanized and the tissues removed for total RNA extraction. Evaluation of gene expression was performed by qRT-PCR. Statistical analysis was performed using analysis of variance (ANOVA) followed by post-tests (α=0.05). Results: LPS induced expression of mRNA for COX-2 (Ptgs2) and PGE2 receptors (Ptger1, Ptger3 and Ptger4), indicating that cyclooxygenase is involved in periapical response to LPS. A signaling that favours bone resorption was observed because Tnfsf11 (RANKL), Vegfa, Ctsk, Mmp9, Cd36, Icam, Vcam1, Nfkb1 and Sox9 were upregulated in response to LPS. Indomethacin and celecoxib differentially modulated expression of osteoclastogenic and other bone metabolism genes: celecoxib downregulated Igf1r, Ctsk, Mmp9, Cd36, Icam1, Nfkb1, Smad3, Sox9, Csf3, Vcam1 and Itga3 whereas indomethacin inhibited Tgfbr1, Igf1r, Ctsk, Mmp9, Sox9, Cd36 and Icam1. Conclusions: We demonstrated that gene expression for COX-2 and PGE2 receptors was upregulated after LPS inoculation into the root canals. Additionally, early administration of indomethacin and celecoxib (NSAIDs) inhibited osteoclastogenic signaling. The relevance of the cyclooxygenase pathway in apical periodontitis was shown by a wide modulation in the expression of genes involved in both bone catabolism and anabolism.

Resumo em Inglês:

Abstract Alternatives for the treatment of caries disease, such as minimally invasive approaches, have been developed in recent years. Objective: To carry out clinical and radiographic evaluations of three cavity liners after selective caries removal. Methodology: Thirty-six primary molars with deep occlusal caries lesions without pulp involvement (from children of both genders, aged between 5 and 8 years) were randomly divided into the following groups: calcium hydroxide cement (CHC) group; mineral trioxide aggregate (MTA) group and Portland cement with added zirconium oxide (PCZ) group. The following-up period was 6- and 12-month. The clinical and radiographic success rates were evaluated through chi-square test. The radiographic measurements were compared by ANOVA followed by Tukey's test (p<0.05). Results: Thirty-six patients were included, but thirty-four returned for 12-month follow-up. The overall success rate of the therapy for the three groups was 94.11% and no statistically significant differences occurred in the comparison among groups (p>0.05). Nineteen radiographs were selected to measure the dentin barrier thickness. The intragroup comparison presented a statistically significant increase of the dentin barrier for all groups, at 12-month follow-up. However, the MTA group showed increase of the dentin barrier, over time, 6- to 12-month follow-up. The intergroup comparison revealed no statistically significant differences (p>0.05). Conclusion: The clinical and radiographic data showed that all cavity liners provided effective treatment of primary teeth after selective caries removal.

Resumo em Inglês:

Abstract This study aimed to compare the linear dimensions of the dental arches of adult patients with complete unilateral cleft lip and palate (UCLP) after orthodontic and prosthetic treatment with fixed partial dentures (FPD) to patients without clefts, using 3D technology. This retrospective longitudinal study sample consisted of 35 subjects divided into two groups. Included in this sample were 15 complete UCLP individuals who had received orthodontic treatment before rehabilitation with a fixed partial denture (FG), as well as 20 patients without cleft as control group (CG). All patients were aged between 18 and 30 years. Digital dental casts were obtained in two stages: (T1) end of orthodontic treatment and (T2) one year after prosthetic rehabilitation (FG); and (T1) end of orthodontic treatment and (T2) one year after removal of the orthodontic appliance (CG). Intercanine, interfirst premolar and intermolar distances, and incisor-molar length were obtained. A precalibrated and trained examiner performed the assessments. Intergroup differences between T2 and T1 were compared between the groups using the t test or Mann-Whitney test with a significance level of 5% (p<0.05). The intercanine distance variation (T2-T1) showed statistical difference (p=0.005) increasing in the FG group and decreasing in the CG group. In the interfirst premolar distance variation, FG decreased, while CG increased with statistically significant difference (p=0.008). The intercanine distance of individuals with cleft showed stability, while that of the CG had no stability. The CG showed stability in the interfirst premolar distance, while FG had no stability. These findings showed that the FPD is capable of restricting orthodontic results, leading to a stabilization of the dental arches.

Resumo em Inglês:

Abstract Objective Considering the global public health problem of smoking, which can negatively influence bone tissue repair, the aim of this study is to analyze the influence of photobiomodulation therapy (PBM) on calvaria defects created surgically in specimens under the effect of cigarette smoke and analyzed with use of histomorphometric and immunohistochemistry techniques. Methodology Calvaria defects 4.1 mm in diameter were surgically created in the calvaria of 90-day-old rats (n=60) that were randomly divided into 4 experimental groups containing 15 animals each: control group (C), smoking group (S), laser group (L), and smoke associated with laser group (S+L). The animals were subjected to surgery for calvaria defects and underwent PBM, being evaluated at 21, 45, and 60 days post-surgery. The specimens were then processed for histomorphometric and immunohistochemistry analyses. The area of bone neoformation (ABN), percentage of bone neoformation (PBNF), and the remaining distance between the edges of the defects (D) were analyzed histometrically. Quantitative analysis of the TRAP immunolabeled cells was also performed. The data were subjected to analysis of variance (ANOVA) in conjunction with Tukey’s test to verify the statistical differences between groups (p<0.05). Results The smoking group showed less ABN compared to the other experimental groups in all periods, and it also showed more D at 21 days compared to the remaining groups and at 45 days compared to the laser group. The smoking group showed a lower PNBF compared to the laser group in all experimental periods and compared to smoking combined with LLLT group at 21 days. Conclusions PBM acted on bone biomodulation, thus stimulating new bone formation and compensating for the negative factor of smoking, which can be used as a supportive therapy during bone repair processes.

Resumo em Inglês:

Abstract Acetaldehyde, associated with consumption of alcoholic beverages, is known to be a carcinogen and to be related to the tongue dorsum. Objective The aim of this study was to investigate the relationship between acetaldehyde concentration in mouth air and bacterial characteristics on the tongue dorsum. Methodology Thirty-nine healthy volunteers participated in the study. Acetaldehyde concentrations in mouth air were evaluated by a high-sensitivity semiconductor gas sensor. A 16S rRNA gene sequencing technique was used to compare microbiomes between two groups, focusing on the six samples with the highest acetaldehyde concentrations (HG) and the six samples with lowest acetaldehyde concentrations (LG). Results Acetaldehyde concentration increased in correlation with the increase in bacterial count (p=0.048). The number of species observed in the oral microbiome of the HG was higher than that in the oral microbiome of the LG (p=0.011). The relative abundances of Gemella sanguinis, Veillonella parvula and Neisseria flavescens in the oral microbiome of the HG were higher than those in the oral microbiome of the LG (p<0.05). Conclusion Acetaldehyde concentration in mouth air was associated with bacterial count, diversity of microbiome, and relative abundance of G. sanguinis, V. parvula, and N. flavescens.

Resumo em Inglês:

Abstract Objective The rDNA-based method is unable to distinguish between alive and dead cells. Alternatively, bacterial viability can be assessed by molecular methods based on ribosomal RNA (rRNA). Therefore, this study aimed to detect viable streptococci in root canal samples using rRNA-based reverse transcription polymerase chain reaction (RT-PCR), compared to an rDNA-based PCR assay. Methodology Microbiological root canal samples were obtained from 32 teeth with primary endodontic infections before (S1) and after chemomechanical preparation (S2), and after removal of intracanal medication (S3). RNA and DNA were extracted, and complementary DNA (cDNA) was synthesized from RNA using RT reaction. cDNA and genomic DNA were subjected to PCR with primers complementary to the 16S rRNA sequences of Streptococcus spp. McNemar’s test was used to compare the detection rate of both assays (P<0.05). Results Streptococci were detected in 28.12% (9/32) and 37.5% (12/32) of S1 samples using rRNA- and rDNA-based PCR assays, respectively. In contrast, they were detected in only 6.25% (2/32) of S2 samples using rRNA-based RT-PCR, compared to 15.62% (5/32) using rDNA-based PCR. Finally, in S3 samples, streptococci were not detected by rRNA, whereas rDNA-based PCR still detected the bacteria in 12.5% (4/32) of the samples. The total number of PCR-positive reactions in the rDNA-based PCR was higher than in the rRNA-based assay (P<0.05). Conclusions The rRNA-based RT-PCR showed a lower detection rate of streptococci when compared to the rDNA-based PCR, suggesting that the latter may have detected dead cells of streptococci in root canal samples.

Resumo em Inglês:

Abstract Objective Since the transmittance of ceramics can influence the degree of conversion (DC) of resin cements, ceramics composition and shade should be considered in the selection of resin cement. This in vitro study aimed to evaluate the effect of the transmittance of different composition, opacities and shades of ceramics on the degree of conversion of two dual-cured resin cements. Methodology Sixty discs were prepared from low translucency (LT) and medium opacity (MO) lithium disilicate ceramic, and zirconia ceramic (Z). Each group was subdivided into 5 subgroups (n=4) in shades A2, A3.5, B2, C2 and D3. The transmittance measurement was performed in a spectrophotometer. The Variolink II and Rely X U200 resin cements were photoactivated by LED (1400 mW/cm2) for 40 s through the ceramic discs and without the discs (control group). The DC was measured with infrared FTIR spectroscopy, immediately after light activation. Data were analyzed with Kruskall-Wallis and one-way ANOVA, following post-hoc comparisons by Tukey test and Pearson’s correlation test (P<0.05). Results LT ceramic exhibited higher transmittance values compared to MO and Z ceramics. LTA2 and LTB2 showed statistically higher transmittance values compared to MOA2, MOA3.5 and ZA3.5. For Variolink II, the ceramic interposition did not influence the DC, since there were no statistical differences between groups with ceramic interposition and the control group. For Rely X U200 cement, the interposition of some ceramics types/shades (LTA3.5, MOA2, MOA3.5 and ZA3.5) significantly decreased the DC values compared to control group. A positive correlation was found between the ceramic transmittance and DC values of both tested cements. Conclusions. The transmittance and DC values of the cements were influenced by composition and shades of the ceramics. The higher the transmittance of ceramics, the higher the DC values for both cements.

Resumo em Inglês:

Abstract Objectives Visfatin is an adipokine that plays an important role in immune functions as a growth factor, enzyme, and pro-inflammatory mediator. We aimed to determine the levels of visfatin, interleukin-6 (IL-6) and tumor necrosis factor-alpha (TNF-α) in gingival crevicular fluid (GCF) in both obese/non-obese patients, with/without generalized chronic periodontitis (GCP). Methodology Patients were categorized as obese (O) (n=31) or non-obese (nO) (n=19). Groups were divided into four subgroups according to periodontal conditions: (1) periodontally healthy without obesity (nO-Ctrl); (2) GCP without obesity (nO-CP); (3) periodontally healthy with obesity (O-Ctrl); and (4) GCP with obesity (O-CP). Demographic variables, anthropometric and laboratory data were recorded. Periodontal parameters were measured at baseline and 3rd months after either non-surgical periodontal treatment or calorie -restricted diet therapy. At the same time, GCF samples were taken from patients to analyze TNF-alpha, IL-6,and visfatin levels. Results Periodontal parameters were significantly higher in the O group than in the nO group (P<0.05). IL-6 levels were higher in the O group than in the nO group (P<0.001). The visfatin levels of the obese patients were reduceddecreased following the treatments (P<0.05). Cholesterol levels were higher in the O group than in the nO groups (P<0.05). IL-6 levels were higher in O-CP and O-Ctrl groups than in the nO-Ctrl group (P<0.05). Compared to the other groups, visfatin levels were significantly higher in the O-CP group but decreased following treatment (P<0.05). Conclusions Our findings suggest that visfatin and IL-6 levels in GCF are associated with the pathogenesis of obesity and periodontitis. Within the limits of this study, we considered that there might be an association between the lipid profile and periodontitis on systemically healthy individuals.

Resumo em Inglês:

Abstract Purpose To compare, both qualitatively and quantitatively, the inflammatory cells, vascular density and IL-6 immunolabeled cells present in the pulp after pulpotomy with white MTA versus 15.5% ferric sulfate (FS). Methodology Forty-eight mandibular first molars from 24 Wistar rats were divided into MTA or FS groups and subdivided according to the period after pulpotomy procedure (24, 48 and 72 hours). Four teeth (sound and untreated) were used as controls. Histological sections were obtained and assessed through the descriptive analysis of morphological aspects of pulp tissue and the quantification of inflammatory cells, vascular density and interleukin-6 (IL-6) expression. Data were statistically analyzed (p<0.05). Results The number of inflammatory cells was similar in both groups, being predominantly localized at the cervical radicular third. In the MTA group, increased inflammation was observed at 48 hours. Vascular density was similar in both groups and over time, being predominant in the medium radicular third. No correlation was found between the number of inflammatory cells and the vascular density. Pulp tissue was more organized in MTA-treated teeth. In both groups, a weak to moderate IL-6 expression was detected in odontoblasts and inflammatory cells. Comparing both groups, there was a greater IL-6 expression in the cervical radicular third of teeth treated with MTA at 24 hours and in the medium and apical thirds at 72 hours, while in the FS group a greater IL-6 expression was found in the apical third at 24 hours. Conclusion The MTA group presented better histological features and greater IL-6 expression than the FS group. However, no difference was observed between the groups regarding the inflammatory status and vascularization, suggesting the usefulness of FS as a low-cost alternative to MTA.

Resumo em Inglês:

Abstract Studies on the oral health of individuals with intellectual disability (ID) have identified problems that include a high prevalence of periodontal disease. The use of probiotics to treat periodontal disease has been the focus of considerable research, and bovine milk fermented with Lactobacillus rhamnosus L8020 (L8020 yogurt) has been shown to reduce the oral prevalence of four periodontal pathogens. Objective The aim of this randomized, double-blind, placebo-controlled trial was to compare the effects of L8020 yogurt (test group) with those of placebo yogurt (placebo group) on the papillary-marginal-attached (PMA) index, gingival index (GI), and probing depth (PD) in 23 individuals with ID. Methodology All patients were required to consume the allocated yogurt after breakfast for 90 days. PMA index and GI scores as well as PDs were assessed before the start of yogurt consumption (baseline), after 45 and 90 days of consumption, and 30 days after the cessation of consumption. Student’s t-test, Mann–Whitney U test or Fisher’s exact test was used for inter-group comparisons, and the mixed effect model of repeated measurements was used for data analysis. Results The decrease in PMA index score was significantly greater in the test group than in the placebo group (p<0.001). The GI score also decreased during the study, with a tendency for greater decrease in the test group. Furthermore, decreases in PD between baseline, 45 and 90 days tended to be greater in the test group than in the placebo group. Conclusion These results suggest that regular consumption of bovine milk fermented with L. rhamnosus L8020 can lower the risk of periodontal disease in individuals with ID.

Resumo em Inglês:

Abstract Objective This study was designed for the chemical activation of a 35% hydrogen peroxide (H2O2) bleaching gel to increase its whitening effectiveness and reduce its toxicity. Methodology First, the bleaching gel - associated or not with ferrous sulfate (FS), manganese chloride (MC), peroxidase (PR), or catalase (CT) - was applied (3x 15 min) to enamel/dentin discs adapted to artificial pulp chambers. Then, odontoblast-like MDPC-23 cells were exposed for 1 h to the extracts (culture medium + components released from the product), for the assessment of viability (MTT assay) and oxidative stress (H2DCFDA). Residual H2O2 and bleaching effectiveness (DE) were also evaluated. Data were analyzed with one-way ANOVA complemented with Tukey’s test (n=8. p<0.05). Results All chemically activated groups minimized MDPC-23 oxidative stress generation; however, significantly higher cell viability was detected for MC, PR, and CT than for plain 35% H2O2 gel. Nevertheless, FS, MC, PR, and CT reduced the amount of residual H2O2 and increased bleaching effectiveness. Conclusion Chemical activation of 35% H2O2 gel with MC, PR, and CT minimized residual H2O2 and pulp cell toxicity; but PR duplicated the whitening potential of the bleaching gel after a single 45-minute session.

Resumo em Inglês:

Abstract Extensive restorations in posterior teeth always bring doubts to the clinicians regarding the best protocol, mainly when structures of reinforcement were lost. Objective This study aimed to evaluate the effect of beveling on the fracture resistance and pattern of class II (MOD) restored teeth. Methodology Ninety human premolars were randomly assigned into 9 groups: CTR (control/sound); NC (cavity preparation, non-restored); RU (restored, unbeveled); RTB (restored, entire angle beveling); RPB (restored, partial/occlusal beveling); EC (endodontic access/EA, non-restored); EU (EA, unbeveled); ETB (EA, entire angle beveling); EPB (EA, partial/occlusal beveling). Teeth were restored with Esthet X resin composite and stored in distilled water for 24 h before the inclusion in PVC cylinders. The axial loading tests were performed with 500 kgF at 0.5 mm/min crosshead speed until fracture of the specimens. Fracture resistance and pattern were accessed and data were analyzed using one-way ANOVA and Tukey’s HSD test (α=0.05). Results Mean (±SD) failure loads ranged from 136.56 (11.62) to 174.04 (43.5) kgF in the groups tested without endodontic access. For endodontically accessed teeth, fracture resistance ranged from 95.54 (13.05) to 126.51 (19.88) kgF. Beveling of the cavosurface angle promoted the highest fracture resistance values (p<0.05) and prevented catastrophic fractures. Conclusions Cavosurface angle beveling is capable of improving fracture resistance and pattern for both endodonticaly accessed and non-accessed teeth.

Resumo em Inglês:

Abstract Objective The aim of this study was to evaluate the root canal preparation and apical enlargement of molar root canals with rotary or reciprocating heat-treated nickel-titanium (NiTi) instruments, by using micro-computed tomography (micro-CT). Methodology Mesial root canals (n=48) of mandibular molars, with a curvature between 20° and 40°, were prepared with ProDesign Logic (PDL) 25.01 and 25.06 in rotary motion, or ProDesign R (PDR) 25.06 in reciprocating motion (PDR). Apical enlargement was performed with PDL35.01 and PDL35.05 or PDR35.05. Scanning with 9 µm resolution was performed before and after preparation, and, after apical enlargement, by using micro-CT. The percentage of volume increase, debris and untouched root canal surface, transportation, centralization and preparation time were analyzed. ANOVA and Tukey or Kruskall-Wallis and Dunn statistical tests were conducted (α=.05). Results PDL promoted a higher apical percentage of volume increase, and lower percentage of debris and untouched root canal surface than PDR 25.06 preparation in entire canal and in all thirds (P<.05). Apical enlargement with PDL 35.05 and PDR 35.05 produced a higher percentage of volume increase in the apical region in relation to the initial preparation (P<.05). PDR 35.05 and PDL 35.05 showed similar results in relation to percentage of debris and untouched root canal surface in entire canal and in all thirds (P>.05). Centralization and transportation showed no difference (P>.05). PDR required less time to perform preparation and apical enlargement (P<.05). Conclusions The apical enlargement 35.05 with CM heat-treatment instruments using reciprocating and rotary motion reduced the percentage of debris and untouched root canal surface, without causing deviations or procedural errors. The protocol of greater apical enlargement favors the cleaning of the root canals in both kinematics. Preparation by the reciprocating system was faster than by the rotary system.

Resumo em Inglês:

Abstract Objective This study investigated the role of extracellular deoxyribonucleic acid (eDNA) on Enterococcus faecalis ( E. faecalis ) biofilm and the susceptibility of E. faecalis to sodium hypochlorite (NaOCl). Methodology E. faecalis biofilm was formed in bovine tooth specimens and the biofilm was cultured with or without deoxyribonuclease (DNase), an inhibitor of eDNA. Then, the role of eDNA in E. faecalis growth and biofilm formation was investigated using colony forming unit (CFUs) counting, eDNA level assay, crystal violet staining, confocal laser scanning microscopy, and scanning electron microscopy. The susceptibility of E. faecalis biofilm to low (0.5%) or high (5%) NaOCl concentrations was also analyzed by CFU counting. Results CFUs and biofilm formation decreased significantly with DNase treatment (p<0.05). The microstructure of DNase-treated biofilms exhibited less structured features when compared to the control. The volume of exopolysaccharides in the DNase-treated biofilm was significantly lower than that of control (p<0.05). Moreover, the CFUs, eDNA level, biofilm formation, and exopolysaccharides volume were lower when the biofilm was treated with DNase de novo when compared to when DNase was applied to matured biofilm (p<0.05). E. faecalis in the biofilm was more susceptible to NaOCl when it was cultured with DNase (p<0.05). Furthermore, 0.5% NaOCl combined with DNase treatment was as efficient as 5% NaOCl alone regarding susceptibility (p>0.05). Conclusions Inhibition of eDNA leads to decrease of E. faecalis biofilm formation and increase of susceptibility of E. faecalis to NaOCl even at low concentrations. Therefore, our results suggest that inhibition of eDNA would be beneficial in facilitating the efficacy of NaOCl and reducing its concentration.

Resumo em Inglês:

Abstract Objectives Age estimation is one of the most important factors in forensic medicine. Measuring secondary dentin deposition using cone-beam computed tomography images is an easy and noninvasive method. The aim of this study was to evaluate cone-beam computed tomography images as a reliable method to estimate chronological age by pulp/teeth ratio in anterior teeth in Iranian population. Methodology A total of 649 CBCT images from 377 Iranian patients aged between 20 and 69 years were evaluated. Pulp/teeth ratio (PTR) in maxillary and mandibular canine and central incisor teeth was measured in the axial and sagittal sections using OnDemand 3D Dental software. The Pearson correlation coefficient was determined to evaluate the correlation between the variables. Linear regression analysis, as well as age estimation formula, was used for each tooth separately. Results The regression analyses indicated that maxillary central incisors were more reliable for age estimation (R2=0.586 and standard error of estimate=7.045) compared with the other anterior teeth studied. Maxillary canine teeth had the lowest predictive power (R2=0.392 and standard error of estimate=8.387). Also, comparison of the axial and sagittal sections showed that the axial sections had a higher predictive power. (R2=0.48 for axial plans and R2=0.328 for sagittal plans) Conclusion The use of cone-beam computed tomography in age estimation by pulp/teeth ratio of anterior teeth is useful and a reliable method for age estimation in Iranian population.

Resumo em Inglês:

Abstract The incorporation of antimicrobials in the composites as an attempt to reduce bacterial adhesion without jeopardizing mechanical properties is a challenge for Dentistry. Objective: To evaluate the bacterial adhesion and physical properties of a composite containing the methacrylate triclosan- derivative monomer (TM). Methodology: TM was synthesized and added to an experimental composite. Samples were divided into two groups: Control and TM (13.4 wt%). Antibacterial Activity: Three specimens of each material were prepared and placed on bacterial suspensions of Streptococcus mutans for 1, 5 and 10 days. After these periods the counting of the colonies (log10) was performed. Assays was performed in triplicate. Physical Properties: Three-body Abrasion (TBA): Ten specimens of each material were prepared and stored at 37°C/24 h. The surface roughness (Ra) and hardness (KHN) were analyzed. Next, the specimens were submitted to abrasive wear (30,000 cycles) and re-evaluated for Ra and KHN; Sorption/solubility (SS): cylindrical specimens (n=10) were prepared and weighted. The specimens were immersed in deionized water for 7 days at 37°C and then their weight was verified again. SS were calculated using accepted formulas; Diametral tensile strength (DTS): specimens (n=10) underwent test performed in an Instron universal testing machine at a crosshead speed of 1 mm/min. Data were submitted to appropriate statistical tests according to data distribution and assay (p<0.05). Results: Bacterial Adhesion: TM showed a significant reduction on biofilm accumulation in the evaluated periods: 1 day (1.537±0.146); 5 days (2.183±0.138) and 10 days (4.469±0.155) when compared with Control: 1 day (4.954±0.249); 5 days (5.498±0.257) and 10 days (6.306±0.287). Physical Properties: For TBA, SS and DTS no significant difference was found between groups Control and TM. The incorporation of methacrylate triclosan-based monomer in the experimental composite reduce bacterial adhesion of S. mutans and did not affect important polymer properties.

Resumo em Inglês:

Abstract SOX2 is a transcription factor related to the maintenance of stem cells in a pluripotent state. Podoplanin is a type of transmembrane sialoglycoprotein, which plays an important role in tumor progression and metastasis. This study aims to determine association of SOX2 and podoplanin expression in the progression of oral squamous cell carcinomas and to elucidate the association between two proteins. Methodology: The immunohistochemical expression of SOX2 and podoplanin were evaluated in 60 cases of primary oral squamous cell carcinomas. The correlation between the SOX2 and podoplanin expression and the clinicopathological features of the tumors and the patient outcomes were assessed. Results: The expression of SOX2 was seen in 38/60 (63%) of the cases and the expression for podoplanin was seen in 45/60 (75%) cases. There was a significant inverse correlation between the expression of SOX2 and podoplanin with the tumor grade (p=0.002 and p=0.017, respectively). There was a high expression of SOX2 in 9/13 cases that presented with disease free survival. Survival analysis showed that a high expression of SOX2 correlated positively (p=0.043) with the disease-free survival. There was a significant positive association between the pattern of SOX2 and podoplanin expression (p=0.002). Conclusion: A high expression of SOX2 was associated with better disease-free survival. The expression of podoplanin was associated with the degree of differentiation of the tumors. Analysis of these biomarkers can aid in the prognosis and treatment of oral squamous cell carcinomas.

Resumo em Inglês:

Abstract Objective: To evaluate the effect of ultrasonic and sonic activation on physicochemical properties of AH Plus, MTA Fillapex, ADSeal, GuttaFlow Bioseal, and GuttaFlow 2 sealers. Methodology: Three experimental groups were formed: no activation (NA), ultrasonic activation (UA), and sonic activation (SA). The sealers were manipulated according to the manufacturers’ instructions. A 3-mL syringe was adapted to receive 1 mL of sealer. Activation was performed with a 20/.01 ultrasonic insert (20 s/1W) in the UA group. A size 35.04 sonic tip was used (20 s/10,000 cycles/min-1) in the SA group. The molds for physicochemical analysis were filled and evaluated according to ANSI/ADA specification no. 57: setting time (ST), flow (FL), dimensional change (DC), solubility (SB), and radiopacity (RD). Statistical analysis was performed by Kruskal-Wallis, one-way ANOVA, and Tukey's tests (P<0.05). Results: Regarding ST, only AH Plus and GuttaFlow 2 in the NA group met the ANSI/ADA standards. All FL values were greater than 20 mm in diameter, as determined by ANSI/ADA. The tested sealers and protocols did not comply with the ANSI/ADA standards for DC. As for SB, only MTA Fillapex, regardless of the activation protocol, did not follow the ANSI/ADA standards. All of the investigated sealers, regardless of the activation protocol, presented radiographic density higher than 3 mm Al, as proposed by ANSI/ADA. Conclusions: UA and SA promoted changes in the physicochemical properties of the evaluated root canal sealers, mainly in ST and F. Thus, it is important to evaluate the physicochemical properties of endodontic sealers associated with activation techniques prior to clinical application in order to determine whether the properties follow the parameters set by ANSI/ADA, ensuring safety and quality of root canal filling.

Resumo em Inglês:

Abstract There is growing evidence that C. albicans is associated with dental caries, but its role on caries development needs to be better clarified. Objective: To evaluate at the hard tissue level the effect of C. albicans on the cariogenic potential of S. mutans biofilms focusing on the mineral profile of induced carious lesions. This study also aimed to evaluate the effect of C. albicans on the acidogenic potential of S. mutans biofilms. Methodology: Dual-species (CA+SM) and single-species biofilms (CA or SM) were grown on the surface of enamel slabs in the presence of glucose/sucrose supplemented culture medium for 24, 48 and 72 hours. Demineralization was evaluated through percentage of surface microhardness change (%SMC) and transversal microradiography analysis (ILM and LD) and pH of the spent medium was recorded daily. Data were analyzed by two-way ANOVA followed by Bonferroni correction. Results: %SMC was statistically different among the biofilms at each time point being the highest for SM biofilms and the lowest for CA biofilms which also differed from CA+SM biofilms [SM (24 h: 47.0±7.3; 48 h: 66.3±8.3; 72 h: 75.4±3.9); CA (24 h: 7.3±3.3; 48 h: 7.1±6.4; 72 h: 6.6±3.6); CA+SM (24 h: 35.9±7.39.1; 48 h: 47.2±9.5; 72 h: 47.6±9.5)]. pH of spent medium was statistically lower for SM biofilms compared to the other biofilms at each time point and remained constant over time while pH values increased from 24 to 72 h for both CA and CA+SM biofilms [SM (24 h: 4.4±0.1; 48 h: 4.4±0.1; 72 h: 4.5±0.1); CA (24 h: 6.9±0.3; 48 h: 7.2±0.2; 72 h: 7.5±0.2); CA+MS (24 h: 4.7±0.2; 48 h: 5.1±0.1; 72 h: 6.1±0.6)]. IML and LD for SM biofilms increased over time while no difference was observed from 24 to 72 h for the other biofilms. Conclusions: The present data suggest that C. albicans has low enamel demineralization potential and the presence of C. albicans can reduce both the cariogenic and acidogenic potentials of S. mutans biofilms.

Resumo em Inglês:

Abstract Objective: This study aimed to evaluate the effect of avocado/soybean unsaponifiables (ASU) on periodontal repair in rats with induced periodontitis and arthritis. Methodology: Forty-five rats were submitted to periodontitis induction by insertion of ligatures into the upper second molars, maintained for 15 days. These animals were randomly allocated to 3 groups according to the presence of induced arthritis (ART) and the application of the ASU: Control (CTR) group-healthy animals, where saline solution was administered; ART-animals with induced arthritis, where saline solution was administered; ART/ASU-animals with induced arthritis, where ASU (0.6 mg/ kg) was administered. The drugs were administered daily by gavage and the animals were euthanized after 7, 15 and 30 days of the ligature removal. Bone resorption, inflammatory infiltrate composition and marker proteins expression of the differentiation and formation of osteoclasts (RANKL and TRAP) were assessed. Results: The ART/ASU group presented higher bone volume than the ART group at 7 and 30 days after the ligature removal. Furthermore, the ART group presented higher quantity of inflammatory cells and expression of TRAP and RANKL than the other groups. Conclusion: ASU administration improves the repair of periodontal tissues in an experimental periodontitis model in rats with induced arthritis.

Resumo em Inglês:

Abstract Objective: To monitor early periodontal disease progression and to investigate clinical and molecular profile of inflamed sites by means of crevicular fluid and gingival biopsy analysis. Methodology: Eighty-one samples of twenty-seven periodontitis subjects and periodontally healthy individuals were collected for the study. Measurements of clinical parameters were recorded at day −15, baseline and 2 months after basic periodontal treatment aiming at monitoring early variations ofthe clinical attachment level. Saliva, crevicular fluid and gingival biopsies were harvested from clinically inflamed and non-inflamed sites from periodontal patients and from control sites of healthy patients for the assessment of IL-10, MMP-8, VEGF, RANKL, OPG and TGF-β1 protein and gene expression levels. Results: Baseline IL-10 protein levels from inflamed sites were higher in comparison to both non-inflamed and control sites (p<0.05). Higher expression of mRNA for IL-10, RANK-L, OPG, e TGF-β1 were also observed in inflamed sites at day −15 prior treatment (p<0.05). After the periodontal treatment and the resolution of inflammation, seventeen percent of evaluated sites still showed clinically detectable attachment loss without significant differences in the molecular profile. Conclusions: Clinical attachment loss is a negative event that may occur even after successful basic periodontal therapy, but it is small and limited to a small percentage of sites. Elevated inflammation markers of inflamed sites from disease patients reduced to the mean levels of those observed in healthy subjects after successful basic periodontal therapy. Significantly elevated both gene and protein levels of IL-10 in inflamed sites prior treatment confirms its modulatory role in the disease status.

Resumo em Inglês:

Abstract Objectives: Miniscrew has been frequently used, considering that anchorage control is a critical point in orthodontic treatment, and its failure, the main adverse problem. Using two groups of stable (successful) and unstable (failed) mini-implants, this in vivo study aimed to quantify proinflammatory cytokines IL-1 α, IL-6, IL-17, and TNF-α and osteoclastogenesis marker RANK, RANKL, and OPG in gingival tissue, using the real-time polymerase chain reaction technique. Methodology: Thirteen patients of both sexes (11-49 years old) under orthodontic treatment were selected, obtaining 11 successful and 7 failed mini-implants. The mini-implants were placed and removed by the same surgeon, in both jaws. The mean time of permanence in the mouth was 29.4 months for successful and 7.6 months for failed mini-implants. At removal time, peri-mini-implant gingival tissue samples were collected and processed for quantification of the proinflammatory cytokines and osteoclastogenesis markers. Nonparametric Wilcoxon rank-sum test considering the clusters and Kruskal-Wallis test were used for statistical analysis (α=0.05). Results: No significant difference (p>0.05) was observed between the groups for either quantification of cytokines or osteoclastogenesis markers, except for IL-6 (p<0.05). Conclusions: It may be concluded that the expression of IL-1α, IL-17, TNF-α, RANK, RANKL, and OPG in peri-implant gingival tissue were not determinant for mini-implant stability loss, but the higher IL-6 expression could be associated with mini-implant failure.

Resumo em Inglês:

Abstract Hypertension is one of the main causes of premature death in the world; also, it is associated with several bone alterations. Preclinical studies have demonstrated delayed alveolar bone healing in hypertensive rats. However, losartan has been favorable for consolidation of bone grafts and reduction in active periodontitis. Therefore, losartan is suggested to be effective in bone formation stages, as well as in the synthesis of matrix proteins and mineralization. Objectives: To evaluate the alveolar bone dynamics in hypertensive rats treated with losartan by laser confocal microscopy and histological analysis. Methodology: Thirty-two rats, 16 spontaneously hypertensive rats (SHR) and 16 Wistar albinus rats, treated or not with losartan (30 mg/kg/day) were used. Calcein fluorochrome at 21 days and alizarin red fluorochrome at 49 days were injected in rats (both 20 mg/kg). The animals were submitted to euthanasia 67 days after treatment, and then the right maxilla was removed for laser confocal microscopy analysis and the left maxilla for histological analysis. Results: This study showed a greater calcium marking in normotensive animals treated with losartan in relation to the other groups. Laser confocal microscopy parameters showed higher values of bone volume formed, mineralized surface, active surface of mineralization and bone formation rate in normotensive animals treated with losartan. However, a smaller mineralized surface was observed in all hypertensive animals. Conclusion: Losartan can improve bone mineralization parameters under normal physiological conditions, but the same anabolic effect does not occur under hypertension.

Resumo em Inglês:

Abstract Objectives: This study aimed to compare two different soft tissue replacement grafts in their ability to treat gingival recession defects and successfully integrate with the surrounding tissues. Methodology: Nine beagle dogs were included and followed up to 10 weeks. Sites for intervention were allocated to one of the grafting materials investigated. Treatment consisted of coronally advanced flap combined with one of the two soft tissue substitutes on a previous surgically created defect. Materials employed were porcine-derived acellular dermal matrix (ADM) [Novomatrix™ (Test)] and collagen-based matrix (CBM) [Mucograft® (Control)]. Animals were sacrificed at 2, 6, and 10 weeks postoperatively and compared using descriptive histology and histomorphometric outcomes. Results: Macroscopic findings were similar between test and control groups at all intervals. After 10 weeks, both groups demonstrated successful incorporation of the grafting materials without signs of rejection and with comparable tissue integration. The histomorphometric data were similar between groups at 2 weeks; however, the test group provided greater root coverage and increase in tissue thickness than the control at 6- and 10-weeks post surgically. Conclusions: Both porcine-derived ADM and CBM revealed similar histological outcomes with successful integration and absence of adverse events. Test group provided superior outcomes regarding root coverage and increase in tissue thickness.

Resumo em Inglês:

Abstract Objective: Cleft palate (CP) is a congenital birth defect caused by the failure of palatal fusion. Little is known about the potential role of DNA methylation in the pathogenesis of CP. This study aimed to explore the potential role of DNA methylation in the mechanism of CP. Methodology: We established an all-trans retinoic acid (ATRA)-induced CP model in C57BL/6J mice and used methylation-dependent restriction enzymes (MethylRAD, FspEI) combined with high-throughput sequencing (HiSeq X Ten) to compare genome-wide DNA methylation profiles of embryonic mouse palatal tissues, between embryos from ATRA-treated vs. untreated mice, at embryonic gestation day 14.5 (E14.5) (n=3 per group). To confirm differentially methylated levels of susceptible genes, real-time quantitative PCR (qPCR) was used to correlate expression of differentially methylated genes related to CP. Results: We identified 196 differentially methylated genes, including 17,298 differentially methylated CCGG sites between ATRA-treated vs. untreated embryonic mouse palatal tissues (P<0.05, log2FC>1). The CP-related genes Fgf16 (P=0.008, log2FC=1.13) and Tbx22 (P=0.011, log2FC=1.64,) were hypermethylated. Analysis of Fgf16 and Tbx22, using Gene Ontology (GO) and the Kyoto Encyclopedia of Genes and Genomes (KEGG), identified 3 GO terms and 1 KEGG pathway functionally related to palatal fusion. The qPCR showed that changes in expression level negatively correlated with methylation levels. Conclusions: Taken together, these results suggest that hypermethylation of Fgf16 and Tbx22 is associated with decreased gene expression, which might be responsible for developmental failure of palatal fusion, eventually resulting in the formation of CP.

Resumo em Inglês:

Abstract Objective: To investigate the use of polymethyl methacrylate (PMMA) electrospun fiber mats containing different amounts of polyethylene oxide (PEO) as a doxycycline delivery system and to test antibacterial activity against an oral pathogen. Methodology: PMMA powders or PEO (mol wt 200 Kd) (10,20,30% w/w/) were dissolved in N, N-dimethylformamide (DMF) to obtain a final polymer concentration of 15% in DMF (w/v). 2% Doxycycline monohydrate was added to the solutions and submitted to vortex mixing. The solution was transferred to a plastic syringe and fit into a nanofiber electrospinning unit. The parameters applied were: voltage at 17.2 kV; distance of 20 cm between the needle tip and the collector plate; target speed at 2 m/min; and transverse speed at 1cm/min. Syringe pump speed was 0.15 mm/min. The drug release analysis was performed by removing aliquots of the drug-containing solution (in PBS) at specific periods. Doxycycline release was quantified using RP-HPLC. Fiber mats from all groups had their antibacterial action tested against S. mutans based on inhibition halos formed around the specimens. The experiments were performed in triplicate. Gravimetric analysis at specific periods was performed to determine any polymer loss. Morphological characterization of the electrospun fibers was completed under an optical microscope followed by SEM analysis. Results: The addition of PEO to the PMMA fibers did not affect the appearance and diameter of fibers. However, increasing the %PEO caused higher doxycycline release in the first 24 h. Fibers containing 30% PEO showed statistically significant higher release when compared with the other groups. Doxycycline released from the fibers containing 20% or 30% of PEO showed effective against S. mutans. Conclusion: The incorporation of PEO at 20% and 30% into PMMA fiber mat resulted in effective drug release systems, with detected antibacterial activity against S. mutans.

Resumo em Inglês:

Abstract Bulk-fill restorative materials such as bulk-fill composite resins and high viscous glass ionomer cements have become very popular materials in operative dentistry because their application is easy and time-saving. Objectives: The aim of this clinical study was to evaluate the clinical performance of a highly viscous reinforced glass ionomer material, a bulk-fill composite resin and a micro hybrid composite resin in Class II restorations. Methodology: In total, 109 Class II restorations were performed in 54 patients using three different restorative materials: Charisma Smart Composite (CSC); Filtek Bulk Fill Posterior Restorative (FBF); Equia Forte Fil (EF). Single Bond Universal adhesive (3M ESPE, Germany) was used with composite resin restorations. The restorations were evaluated using modified USPHS criteria in terms of retention, color match, marginal discoloration, anatomic form, contact point, marginal adaptation, secondary caries, postoperative sensitivity and surface texture. The data were analyzed using Chi-Square, Fischer's and McNemar's tests. Results: At the end of one year, 103 restorations were followed up. No changes were observed during the first 6 months. At the end of one year, there were small changes in composite restorations (FBF and CSC) but no statistically significant difference was observed between the clinical performances of these materials for all criteria (p>0.05). However, there was a statistically significant difference between EF, FBF and CSC groups in all parameters except marginal discoloration, secondary caries and postoperative sensitivity in one-year evaluation (p<0.05). Conclusion: Bulk-fill composite resins and conventional composite resins showed more successful clinical performance than highly viscous reinforced glass ionomers in Class II cavities.

Resumo em Inglês:

ABSTRACT Objectives: To compare the sealing ability and biocompatibility of Biodentine with mineral trioxide aggregate (MTA) when used as root-end filling materials. Methodology: The Cell Counting Kit-8 (CCK-8) assay was used to compare the cytotoxicity of MTA and Biodentine. Twenty-one extracted teeth with a single canal were immersed in an acidic silver nitrate solution after root-end filling. Then, the volume and depth of silver nitrate that infiltrated the apical portion of the teeth were analyzed using micro-computed tomography (micro-CT). Seventy-two roots from 3 female beagle dogs were randomly distributed into 3 groups and apical surgery was performed. After six months, the volume of the bone defect surrounding these roots was analyzed using micro-CT. Results: Based on the results of the CCK-8 assay, MTA and Biodentine did not show statistically significant differences in cytotoxicity (P>0.05). The volume and the depth of the infiltrated nitrate solution were greater in the MTA group than in the Biodentine group (P<0.05). The volume of the bone defect was larger in the MTA group than in the Biodentine group. However, the difference was not significant (P>0.05). The volumes of the bone defects in the MTA and Biodentine groups were smaller than the group without any filling materials (P<0.05). Conclusions: MTA and Biodentine exhibited comparable cellular biocompatibility. Biodentine showed a superior sealing ability to MTA in root-end filling. Both Biodentine and MTA promoted periradicular bone healing in beagle dog periradicular surgery models.

Resumo em Inglês:

Abstract Vitamin D has been known to have important regulatory functions in inflammation and immune response and shows inhibitory effects on experimental periodontitis in animal models. However, the potential mechanism has yet to be clarified. Recent studies have highlighted Aryl hydrocarbon receptor (AhR) and its downstream signaling as a crucial regulator of immune homeostasis and inflammatory regulation. Objective: This study aimed to clarify the effect of 1,25-dihydroxyvitamin D3 (VD3) on experimental periodontitis and AhR/nuclear factor-κB (NF-κB)/NLR pyrin domain-containing 3 (NLRP3) inflammasome pathway in the gingival epithelium in a murine model. Methodology: We induced periodontitis in male C57BL/6 wild-type mice by oral inoculation of Porphyromonas gingivalis (P. gingivalis), and subsequently gave intraperitoneal VD3 injection to the mice every other day for 8 weeks. Afterwards, we examined the alveolar bone using scanning electron microscopy (SEM) and detected the gingival epithelial protein using western blot analysis and immunohistochemical staining. Results: SEM images demonstrated that alveolar bone loss was reduced in the periodontitis mouse model after VD3 supplementation. Western blot analyses and immunohistochemical staining of the gingival epithelium showed that the expression of vitamin D receptor, AhR and its downstream cytochrome P450 1A1 were enhanced upon VD3 application. Additionally, VD3 decreased NF-κB p65 phosphorylation, and NLRP3, apoptosis-associated speck-like protein, caspase-1, interleukin-1β (IL-1β) and IL-6 protein expression. Conclusions: These results implicate the alleviation of periodontitis and the alteration of AhR/NF-κB/NLRP3 inflammasome pathway by VD3 in the mouse model. The attenuation of this periodontal disease may correlate with the regulation of AhR/NF-κB/NLRP3 inflammasome pathway by VD3.

Resumo em Inglês:

Abstract Due to the large number of individuals with Unilateral Hearing Loss (UHL) and the recommendation to use hearing assistive devices, studies are required to define possibilities of intervention for this population. Objective: To evaluate the performance of the Remote Microphone System (RMS) in children with UHL. Methodology: Prospective clinical study with a convenience sample. Eleven children (mean age of 9.2 years) with severe and profound sensorineural UHL, hearing aid users and enrolled in regular schools participated in the study. They were evaluated using the Hearing in Noise Test (HINT), the Classroom Participation Questionnaire (CPQ), and the Sustained Auditory Attention Ability Test (SAAAT) with RMS. Results: HINT results were analyzed using variance to three criteria of repeated measures, which revealed differences between intervention, position, and time factors and significant interaction between these three factors. The comparative analysis of the results from CPQ showed significant differences in the statistical t-test (p=<0.001) for all subscales. The analysis of variance at two repeated measures criteria used in the study of SAAAT revealed a difference between intervention and time, and both interacted significantly. Conclusion: The RMS associated with a hearing aid was effective for individuals with UHL.

Resumo em Inglês:

Abstract Candida albicans is the main causative pathogen of denture stomatitis, which affects many complete denture patients. Objective: To evaluate the effect of different concentrations of nanodiamonds (NDs) added to polymethyl methacrylate (PMMA) denture base material on Candida albicans adhesion as well as on surface roughness and contact angle. Methodology: Acrylic resin specimens sized 10×10×3 mm3 were prepared and divided into four groups (n=30) according to ND concentration (0%, 0.5%, 1%, 1.5% by wt). Surface roughness was measured with a profilometer, and the contact angle with a goniometer. The effect of NDs on Candida albicans adhesion was evaluated using two methods: 1) slide count and 2) direct culture test. Analysis of variance (ANOVA) and Tukey's post hoc test were used in the statistical analyses. Results: Addition of NDs decreased the Candida albicans count significantly more than in the control group (p<0.05), with a lowest of 1% NDs. Addition of NDs also significantly decreased the surface roughness (p<0.05), but the contact angle remained the same. Incorporation of NDs into the PMMA denture base material effectively reduced Candida albicans adhesion and decreased surface roughness. Conclusion: PMMA/NDs composites could be valuable in the prevention of denture stomatitis, which is considered one of the most common clinical problems among removable denture wearers.

Resumo em Inglês:

Abstract Disc displacement with reduction (DDWR) is one of the most common intra-articular disorders of the temporomandibular joint (TMJ). Factors related to the etiology, progression and treatment of such condition is still a subject of discussion. This literature review aimed to address etiology, development, related factors, diagnosis, natural course, and treatment of DDWR. A non-systematic search was conducted within PubMed, Scopus, SciELO, Medline, LILACS and Science Direct using the Medical Subjective Headings (MeSH) terms “temporomandibular disorders”, “temporomandibular joint”, “disc displacement” and “disc displacement with reduction”. No time restriction was applied. Literature reviews, systematic reviews, meta-analysis and clinical trials were included. DDWR is usually asymptomatic and requires no treatment, since the TMJ structures adapt very well and painlessly to different disc positions. Yet, long-term studies have shown the favorable progression of this condition, with no pain and/or jaw locking occurring in most of the patients.

Resumo em Inglês:

Abstract Objectives To perform a systematic review of test methodologies on conventional restorative glass-ionomer cement (GIC) materials for mechanical and optical properties to compare the results between different GICs. Material and Methods Screening of titles and abstracts, data extraction, and quality assessments of full-texts were conducted in search for in vitro studies on conventional GICs that follow the relevant specifications of ISO standards regarding the following mechanical and optical properties: compressive strength, flexural strength, color, opacity and radiopacity. Sources The Latin American and Caribbean Health Sciences (LILACS), Brazilian Bibliography of Dentistry (BBO) databases from Latin-American and Caribbean System on Health Sciences Information (BIREME) and PubMed/Medline (US National Library of Medicine - National Institutes of Health) databases were searched regardless of language. Altogether, 1146 in vitro studies were selected. Two reviewers independently selected and assessed the articles according to pre-established inclusion/exclusion criteria. Among all the properties investigated, only one study was classified as being of fair quality that tested compressive strength and was included. It was observed that many authors had not strictly followed ISO recommendations and that, for some properties (diametral tensile strength and microhardness), there are no guidelines provided. Conclusions It was not possible to compare the results for the mechanical and optical properties of conventional restorative GICs due to the lack of standardization of studies.

Resumo em Inglês:

Abstract The immediate loading of implant-assisted fixed prostheses in edentulous maxillae may achieve favorable success rates with reduced treatment time. An evidence summary of clinical trials is key to recommend loading protocols in these cases. Objectives To compare immediately loaded, fully implant-supported complete dentures to early and conventional/delayed loading in the edentulous maxillae of adult patients by a systematic review of controlled clinical trials (CCT). Methodology CCTs reports were identified up to January 17, 2019 from Cochrane Oral Health Group’s Trial register, Cochrane Central Register of controlled trials (CENTRAL), MEDLINE (Ovid), BIOSIS, EMBASE, CINAHL, Web of Science, and DARE. Two independent reviewers screened titles/abstracts and confirmed inclusion using full texts. Data were extracted and quality assessed (Cochrane Risk of Bias tool) independently and in duplicate. Study heterogeneity prevented pooling by meta-analysis. Results Out of 1,052 candidate studies, four CCTs were included. Two trials had patient satisfaction as an outcome: (1) A randomized trial compared immediately and early loaded fixed dentures and found more satisfaction with the first after 12 months; (2) A non-randomized study found better satisfaction with immediate fixed dentures compared to conventional loading after 3 months (no more at 12 months). Regarding implant success and prosthetic complications, three trials did not report significant differences comparing immediate loading to other protocols. Conclusions This review found weak evidence of differences between immediate load and other loading regimens, regarding patient satisfaction and maintenance events/adversities. The potential of immediate loading for favorable results in edentulous maxillae reinforces the need for well-designed RCTs, for solid clinical guidelines. Registration number CRD42018071316 (PROSPERO database).