Acessibilidade / Reportar erro
Ciência Florestal, Volume: 19, Número: 1, Publicado: 2009
  • EFEITO DA PODA DE RAIZES SOBRE O CRESCIMENTO DAS MUDAS DE EUCALIPTO Artigos

    Freitas, Teresa Aparecida Soares de; Barroso, Deborah Guerra; Souza, Leonardo Silva; Carneiro, José Geraldo de Araújo

    Resumo em Português:

    RESUMO O trabalho teve como objetivo avaliar o efeito das podas no sistema radicial de mudas de Eucalyptus camaldulensis, produzidas em blocos. No viveiro, foram testados três tratamentos (T1: sem poda do sistema radicial; T2: 1 poda do sistema radicial; T3: duas podas do sistema radicial), disposto em DIC, com nove repetições, sendo cada repetição composta por 96 mudas. Parte dessas mudas foi levada para o campo para avaliação do efeito da poda das raízes após o plantio no campo. Foram dispostas em quatro blocos casualizados, com 49 mudas por parcela. O substrato utilizado para produção de mudas foi a mistura de plantmax florestal (60%) e fibra de coco de granulometria mista (40%), sendo adicionados 8 g de osmocote (19-06-10) por quilo do substrato. As podas das raízes na fase de viveiro foram realizadas aos 80 e 90 dias após a semeadura, com auxílio de uma lâmina afiada. As mudas foram avaliadas aos 100 dias após a semeadura, quanto à altura da parte aérea, diâmetro do colo, massa seca da parte aérea, comprimento e diâmetro das raízes. No campo as mudas foram avaliadas quanto a altura e diâmetro ao 1, 3, 5, 7 e 9 meses após plantio. No viveiro, mesmo não havendo diferença no crescimento em altura e diâmetro da parte aérea das mudas entre os tratamentos, aquelas que não sofreram poda de suas raízes (T1) apresentaram menor produção de massa seca da parte aérea, representada pelas folhas. Já para o sistema radicial, quando foram aplicadas duas podas durante o ciclo de produção, as mudas apresentaram maior comprimento e diâmetro de raízes produzidas. Não houve diferença no crescimento das mudas após plantio no campo, no entanto, a condição climática na época de implantação e condução do experimento, além do sítio favorável ao desenvolvimento das mudas pode ter contribuído para esse resultado, sendo necessária condução de novo experimento, para avaliar o efeito das podas, em mudas plantadas em condições adversas.

    Resumo em Inglês:

    ABSTRACT The objective of this work was to evaluate the effect of the roots prunings of Eucalyptus camaldulensis seedlings produced in blocks. In the nursery, three treatments were tested (T1: without roots pruning; T2: one roots pruning; T3: two roots pruning), in Completely Randomized Design, with nine replicates (96 seedlings for replicate). Portion of those seedlings was taken for the field for evaluation of the pruning roots effect after the planting in the field. The substrate used for production of seedlings was the mixture of forest plantimax (60%) and fiber of the coconut (40%), 8g of osmocote were added (19-06-10) per kilo of the substrate. The prunings of the roots in the nursery were accomplished to the 80 and 90 days after sowing, with sharp sheet. The seedlings were evaluated 100 days after the sowing, for height, stem diameter, shoot dry matter, length and diameter roots. In the field the seedlings were evaluated as the height and diameter to the 1, 3, 5, 7 and 9 months after planting. In the nursery, there was no difference in the shoot height and diameter of the seedlings among the treatments, but the seedlings which did not receive any root pruning (T1) presented smaller production of shoot dry matter, acted by the leaves. When two prunings were applied during the production cycle, the seedlings presented larger length and diameter roots. There was not any difference in the growth of the seedlings after planting in the field; however, the climatic condition in the implantation and conduction of experiment, besides the favorable site to the development of the seedlings might have contributed to that result, being necessary the conduction again experiment, to evaluate the effect of the prunings, in seedlings planted in adverse conditions.
  • CRESCIMENTO EM DIÂMETRO DE Araucaria angustifolia (Bertol.) Kuntze EM FUNÇÃO DA IDADE, EM TRÊS REGIÕES DO RIO GRANDE DO SUL Artigos

    Hess, André Felipe; Schneider, Paulo Renato; Finger, César Augusto Guimarães

    Resumo em Português:

    RESUMO O presente trabalho teve como objetivo estudar o crescimento em diâmetro em função da idade, de povoamentos naturais de Araucaria angustifolia (Bertol.) Kuntze, nas regiões fitogeográficas do Planalto Médio, Encosta Superior do Nordeste e Serra do Sudeste do Rio Grande do Sul. Para isso, utilizou-se a equação de crescimento de Backman, que se mostrou eficiente com aplicação de variáveis dummy, permitindo identificar diferenças no crescimento para as regiões estudadas, havendo a necessidade de equações separadas para cada local, o que permitiu minimizar os erros de estimativas. Os resultados obtidos demonstram que, em cada região, a espécie apresentou forma e crescimento diamétrico diferenciado. Na Serra do Sudeste, o incremento médio anual em diâmetro foi de 0,96 cm/ano aos 33 anos; no Planalto Médio, de 0,95 cm/ano aos 22 anos; e, na Encosta Superior do Nordeste, de 1,04 cm/ano aos 20 anos de idade, indicando um bom potencial de crescimento médio.

    Resumo em Inglês:

    ABSTRACT The present work aimed to study the natural stand of Araucaria angustifolia (Bertol.) Kuntze growth in diameter in function of the age, in Medium Plateau, Leans Superior of the Northeast and Mountain of the Southeast phytogeographics areas of Rio Grande do Sul. For this, the Backman’s growth equation had been used, showing to be efficient with application of dummy variables, allowing identifying differences in growth for the studied areas, having the need of separating equations to each place, what allowed minimizing the estimates errors. The obtained results demonstrate that in each area the species presented form and differentiated diametric growth. In the Southeast Mountain, the average annual increment in diameter had been 0,96 cm/year at 33 years; in the Medium Plateau, 0,95 cm/year at 22 years; and in the Northeast Superior Hillside, 1,04 cm/year at 20 years-old, indicating a good potential of medium growth.
  • RESISTÊNCIA AO INTEMPERISMO ARTIFICIAL DE QUATRO MADEIRAS TROPICAIS: O EFEITO DOS EXTRATIVOS Artigos

    Barreto, Cynara Caroline Kern; Pastore, Tereza Cristina Monteiro

    Resumo em Português:

    RESUMO As madeiras tropicais: garapeira (Apuleia leiocarpa), tauari (Couratari stellata), itaúba (Mezilaurus itauba) e marupá (Simarouba amara) foram selecionadas para examinar o efeito da presença dos extrativos na variação de cor e no processo de fotodecomposição das suas superfícies. Amostras com e sem extrativos foram submetidas a ciclos de radiação ultravioleta (350 nm) e água até totalizar 2.000 horas de irradiação e 400 horas de lixiviação. A mudança da cor natural das madeiras foi monitorada por espectrocolorimetria de reflexão difusa. Amostras de marupá e tauari com teores de extrativos menores que 2% exibiram variação de cor com o aumento do tempo de tratamento quase iguais às amostras sem extrativos. A resistência anormal do tauari à alteração de cor não pode ser atribuída aos seus extrativos. Para a garapeira e para a itaúba, a presença de 11,7 e 7,42% de extrativos respectivamente acelerou a velocidade de variação de cor. A análise dessas variações de cor indica que os extrativos, nesse caso, agiram acentuando a cor natural da madeira. Adicionalmente, verificou-se que o tauari foi a madeira mais resistente à variação de cor do grupo estudado, seguido pela garapeira, marupá e itaúba todas com extrativos.

    Resumo em Inglês:

    ABSTRACT The tropical woods Apuleia leiocarpa, Couratari stellata, Mezilaurus itauba and Simarouba amara were selected to examine the effect of the presence of the extractives in the color variation and in the photodecomposition process of their surfaces. Samples with and without extractives were submitted to cycles of ultraviolet radiation (350 nm) and immersion in water until totalizing 2,000 hours of irradiation and 400 hours of water leaching. Changings in the natural wood colors were monitored by diffuse reflectance spectroscopy. Samples of Simarouba amara and Couratari stellata with extractives content of 2% or less showed color variation with time of treatment almost similar to the samples without extractives. The abnormal resistance of Couratari stellata to color changing can not be attributed to extractives. For the Apuleia leiocarpa and Mezilaurus itauba woods, the presence of 11,7% and 7,42% of extractives compounds, respectively, accelerated the color variation rate. Analysis of the color variation indicated that the extractives, in this case, acted by intensifying the natural wood color. Additionally, it was verified that Couratari stellata was the more resistant wood to color variation in this studied group of woods, followed by Apuleia leiocarpa, Simarouba amara and Mezilaurus itauba, all with extractives.
  • EFEITO DO TRATAMENTO TÉRMICO SOBRE A RESISTÊNCIA AO CISALHAMENTO DA LINHA DE COLA EM PAINÉIS OSB Artigos

    Santos, Airton Mauro de Lára; Souza, Frederico de; Costa, Mirian de Almeida; Teles, Ricardo Faustino; Pazetto, Valéria Maria Figueiredo; Menezzi, Cláudio Henrique Soares Del

    Resumo em Português:

    RESUMO As pesquisas sobre o tratamento térmico em painéis OSB (oriented strandboard) vêm buscando reduzir a higroscopicidade dos painéis, bem como aliviar as tensões geradas durante o processo de prensagem. Entretanto, o tratamento térmico acima de 160ºC pode causar inativação da superfície da madeira, tornando-a mais lisa, diminuindo a penetração do adesivo e por conseqüência, reduzindo a qualidade da adesão. O lixamento da superfície de painéis OSB pode tornar a superfície mais rugosa aumentando a qualidade da adesão e a resistência na linha de cola. O presente estudo teve como objetivo avaliar a resistência na linha de cola de painéis OSB tratados termicamente, assim como a influência do lixamento na qualidade da colagem dos painéis. Foram obtidos, aleatoriamente painéis comerciais de OSB que foram tratados termicamente em prensa laboratorial segundo dois níveis temperaturas (190 e 220ºC), três tempos de duração (12, 16 e 20 minutos). Foram cortados 84 corpos-de-prova (CP) sendo que a metade foi lixada. O ensaio de resistência ao cisalhamento da linha de cola foi conduzido segundo ASTM D1037, sendo avaliado o adesivo resorcinol-formaldeído na gramatura de 360 g/m². Os resultados mostraram que o tratamento térmico teve influência na resistência, diminuindo-a levemente em comparação ao material não- tratado. Foi identificado efeito interativo entre a temperatura e o tempo de tratamento. Entretanto, com a operação de lixamento esse efeito foi removido e as diferenças com a testemunha foram diminuídas. Observou-se que os ganhos na resistência com o lixamento foram de até 15%. Sendo assim, o tratamento térmico apresentou pouca influência na resistência da linha de cola e o efeito do lixamento apresentou-se como um processo benéfico, melhorando a qualidade da adesão dos painéis OSB.

    Resumo em Inglês:

    ABSTRACT Research to improve dimensional stability of oriented strand boards (OSB) through thermal treatment has been done. It aims to reduce the higroscopicity of the wood particles as well as to relieve the compression stresses generated during pressing process. In spite of the advantages, the thermal treatment above 160ºC can inactive the surface of the wood, reducing the penetration of the adhesive and, this way, reducing the quality of the adhesion. The sanding of the surface of OSB panels can remove this effect, increasing the quality of the adhesion and the glue line strength. The present study aimed to evaluate the effect of the thermal treatment on the glue-line shear strength of OSB panels and the effect of the sanding levels (190 and 220ºC), three times (12, 16 and 20 minutes). Eighty-four samples were cut, both of them were sanded before the gluing (resorcinol-formaldehyde, 360 g/m²). The glue-line shear strength testing was conducted according to ASTM D 1037 standard. The results reveled that the proposed thermal treatment reduced slightly the shear strength The interaction factor between temperature and time on these results was identified. However, sanding process removed this effect and improved significantly shear strength. Therefore, the thermical treatment imparted little effect on the glue-line shear strength, while the sanding process improved the quality of the adhesion in OSB panels.
  • CARACTERIZAÇÃO FÍSICO-MECÂNICA DO LAMINADO COLADO DE BAMBU (Dendrocalamus giganteus) Artigos

    Paes, Juarez Benigno; Oliveira, Ana Karla Freire de; Oliveira, Elisabeth de; Lima, Carlos Roberto de

    Resumo em Português:

    RESUMO Esta pesquisa teve como objetivo avaliar a influência do tratamento preservativo e do tipo de adesivo nas propriedades físico-mecânicas do laminado colado, confeccionado com o bambu Dendrocalamus giganteus. Para tanto, colmos de bambu foram tratados pelo método de imersão em produto químico (solução de 1% de ingredientes ativos de borato de cobre cromatado - CCB) e em água, durante 15 dias. Dos colmos tratados, foram retiradas as camadas externa e interna, obtendo-se lâminas com espessuras de 4 mm, comprimento de 45 cm e largura de 5 cm. Para a colagem das lâminas, utilizaram-se os adesivos “Cascophen RS” (resorcinol-formol) e “Cascorez-Extra” (acetato polivinílico). O adesivo à base de resorcinol-formol proporcionou maior resistência à umidade ao BLC, quando comparado àquele à base de acetato polivinílico, tendo as amostras provenientes de peças tratadas com CCB sido mais estáveis que as tratadas com água. Dentre as propriedades mecânicas testadas, o adesivo apresentou resultado significativo para o cisalhamento na linha de cola e o tratamento preservativo para o MOE. A interação dos fatores adesivo e tratamento foi significativa para o MOE, resistência a compressão paralela ao cisalhamento na linha de cola, tendo as peças tratadas com água e aderidas com resorcinol-formol apresentado melhores resultados para o MOE e compressão paralela às fibras e aquelas tratadas com CCB, para o cisalhamento na linha de cola.

    Resumo em Inglês:

    ABSTRACT The purpose of this work was to evaluate the preservative treatment effect and the adhesive type in physical-mechanical properties of glue laminated bamboo (GLB) of Dendrocalamus giganteus. Thus, the bamboo stems were treated by immersion method with chemical product (solution of 1% of active ingredients of copper chrome borate - CCB) and water by 15 days. Before treating the stems, the external and internal parts were removed to obtain the flat strips of bamboo with 4 mm of thickness, 45 cm of length and 5 cm of width. The “Cascophen RS” (resorcinol-formaldehyde) and “Cascorez-extra” (polyvinyl acetate) commercial adhesives were used to bond the flat strips. The resorcinol-formaldehyde adhesive showed superior moisture resistance than polyvinyl resin to GLB, and the samples obtained of pieces treated with CCB were more stable than treated with water. Among the mechanical properties tested, the adhesive factor was significant for the resistance to shear parallel to glue line and the preservative treatment for the rigidity. The interaction of the factors adhesive and treatment was significant for the rigidity, resistance to parallel compression and shear parallel to glue line. The pieces treated with water and adhered with resorcinol- formaldehyde presented better results for the rigidity and parallel compression to the fibers and those treated with CCB, for the shear parallel to glue line.
  • ENRAIZAMENTO DE ESTACAS DE DUAS ESPÉCIES DE Salix COM VISTAS À ESTABILIZAÇÃO DE TALUDES FLUVIAIS Nota Técnica

    Rosa, Suzana Ferreira da; Durlo, Miguel Antão

    Resumo em Português:

    RESUMO O presente estudo tem o objetivo de verificar a aptidão biotécnica de duas espécies de Salix (Vime-amarelo e Vime-vermelho) em obras de bioengenharia, por meio da análise do enraizamento e da época de coleta de estacas. O experimento foi conduzido na Universidade Federal de Santa Maria, com coletas mensais de material vegetativo, durante um ano. As estacas, com 40 cm de comprimento e diâmetro variável, foram mantidas em água durante 60 dias para a contagem do número e medição do comprimento das raízes emitidas. A maior produção de raízes para as duas espécies ocorreu nos meses de março e abril. O período em que houve a menor emissão de raízes foi o do verão, especialmente para as estacas coletadas em dezembro. Para essa coleta, não foi observado emissão de raízes no decurso de dois meses de observação. O Vime-amarelo produziu raízes maiores e mais numerosas que o Vime-vermelho, na maioria dos meses de coletas. O diâmetro da estaca influenciou significativamente a produção de raízes de ambas as espécies, em diversos meses de coleta. O resultado do estudo permite concluir, ainda, que as duas espécies de Salix apresentam boa aptidão biotécnica para trabalhos de bioengenharia.

    Resumo em Inglês:

    ABSTRACT This study aims to determine biotechnique aptitude of two species of Salix (Wicker-yellow and Wicker-red) in works of bioengineering, by examining the rooting and the time of collect of sticks. The experiment was conducted at Federal University of Santa Maria, with monthly collects of vegetative material, for one year. The stakes, with 40 cm long and variable diameter, were kept in water for 60 days for counting the number and measuring the length of the roots issued. The biggest production of roots for the two species occurred in March and April. In summer, it was more difficult to issue roots, especially for sticks collected in December. For this collect, it was not observed issuing of roots in the period of two months of observation. The Wicker-yellow produced roots bigger than red-Osier, in mostly months of collect. The diameter of the sticks influenced significantly production roots of both species, in several months of collect. This study also shows that the two species of Salix have good biotechnique aptitude to bioengineering works.
  • MATURAÇÃO FISIOLÓGICA E COLETA DE SEMENTES DE Eugenia uniflora L. (PITANGA), SANTA MARIA, RS Nota Técnica

    Avila, Angela Luciana de; Argenta, Marileia da Silva; Muniz, Marlove Fátima Brião; Poleto, Igor; Blume, Elena

    Resumo em Português:

    RESUMO Este estudo teve como objetivo acompanhar a maturação fisiológica, seus parâmetros indicadores e identificar o momento adequado para a coleta de sementes de Eugenia uniflora, avaliando também a incidência de fungos em frutos e sementes. A pesquisa foi realizada de agosto a outubro de 2004 em Santa Maria, RS. A coleta dos frutos e sementes ocorreu semanalmente, partindo de três árvores matrizes, com início aos 7 dias após a antese (DAA) e término aos 77 DAA. As variáveis observadas foram: altura, diâmetro, peso verde e sanidade de frutos e sementes e teor de umidade, massa seca e germinação das sementes. Identificou-se que a época adequada para a coleta das sementes, no período e local de estudo, ocorreu entre 56 e 63 DAA, quando os frutos apresentavam coloração vermelha e as sementes elevada germinação. Nesse período, o tamanho e o peso de frutos e sementes atingiram seus valores máximos e o teor de umidade e matéria seca das sementes mostraram tendência à estabilização. Os gêneros fúngicos Cladosporium sp. e Alternaria sp. apresentaram as maiores taxas de incidência nos frutos e nas sementes e podem influenciar o armazenamento e a germinação das sementes de mudas de Eugenia uniflora.

    Resumo em Inglês:

    ABSTRACT This study aimed to accompany the physiologic maturation, their indicative parameters and to identify the moment adapted for the seed harvest of Eugenia uniflora, evaluating also the incidence of fungus in fruits and seeds. The research was carried out from August to October of 2004 in Santa Maria, RS. Samples of fruits and seeds were collected weekly, from three main trees, with beginning to the seven days after the anthesis (DAA) and end to the 77 DAA. The observed variables were: length, diameter, weight and sanity of fruits and seeds and moisture content, dry mass and germination of the seeds. The appropriate time for the seed harvest, in the period and place being studied, occurred between 56 and 63 DAA, when the fruits presented red coloration and the seeds high germination. In that period, the size and the weight of fruits and seeds reached their maximum values and the moisture content and dry mass of the seeds showed tendency to the stabilization. The fungi Cladosporium sp. and Alternaria sp. presented the largest incidence taxes in the fruits and in the seeds and they can influence the storage and the germination Eugenia uniflora seeds.
  • ESTABELECIMENTO DE MATA CILIAR ÀS MARGENS DO RESERVATÓRIO DA USINA HIDRELÉTRICA DE CAMARGOS, MG Nota Técnica

    Ferreira, Wendy Carniello; Botelho, Soraya Alvarenga; Davide, Antonio Claudio; Faria, José Márcio Rocha

    Resumo em Português:

    RESUMO Este trabalho teve como objetivo analisar o crescimento e o vigor de espécies arbóreas e arbustivas plantadas na margem do reservatório da UHE Camargos, em Minas Gerais, e verificar o processo de sucessão secundária em função da distância do reservatório e ao longo da área de plantio. Decorridos 150 meses, foi realizado o inventário das espécies arbóreas, medindo-se todos os indivíduos plantados e os provenientes de regeneração natural com DAP ≥ 5cm. Foram atribuídas notas que variaram de 1,0 a 5,0 para avaliação do vigor das árvores. Para o levantamento da regeneração natural, foram demarcados quatro transecções e estabelecidas três parcelas de 1 x 15 m em cada transecção, orientadas no sentido do declive. Os resultados mostram que algumas espécies pioneiras demonstram sinais de senescência após 13 anos de plantio. Foram identificadas na regeneração natural 55 espécies de 27 famílias. Espécies da família Asteraceae predominaram nas áreas mais alteradas, pois são adaptadas a essas condições. Houve predominância da dispersão zoocórica para as espécies regenerantes. Próximo ao reservatório, foram encontradas as maiores densidades de regeneração, enquanto a maior diversidade e altura média foi encontrada do lado da pastagem.

    Resumo em Inglês:

    ABSTRACT The object of this survey was to analyze the growth and vigor of arboreal and shrub species planted in a reservoir shore of the Camargos Hydroeletric Plant, in the state of Minas Gerais, and to verify the processes of natural regeneration in function of the reservoir distance and along the planted area. At 150 months, in the arboreal species inventory, all the planted and the natural regenerations with diameter at breast height ≥ 5 cm were measured. Grades (1.0 to 5.0) were attributed for the evaluation of the tree vigor. For the natural regeneration survey, four transects were demarcated and three 1 x 15 m plots were established in each transect, following the slope. Results showed that some of the pioneer species displayed senescence signs after 13 years of planting. In the natural regeneration, 55 species of 27 families were identified. Species of the Asteraceae family predominated in the more disturbed areas, because they are adapted to these conditions. There was predominance in zoochoric dispersion among the regenerating species. The greater regeneration density was found near the reservoir, whereas the bigger diversity and average height were found in the opposite side of the planted area.
  • ANÁLISE MORFOMÉTRICA EM CROMOSSOMOS DE ESPÉCIES TROPICAIS DE Pinus Nota Técnica

    Ribeiro, Lília Rosário; Davide, Lisete Chamma; Pedrozo, Cássia Ângela; Barbosa, Sandro; Torres, Giovana Augusta

    Resumo em Português:

    RESUMO Foram realizados estudos citogenéticos em Pinus oocarpa Schiede ex Schltdl., Pinus patula Schltdl. & Cham. e nas procedências Jócon Yoro, Las Camelias e San Rafael del Norte do Pinus tecunumanii Eguiluz & J. P. Perry, visando subsidiar a definição da categoria taxonômica do Pinus tecunumanii. A caracterização dos cromossomos mitóticos, utilizando coloração com Giemsa e com o fluorocromo 4’, 6- diamidino-2-fenilindoldiidroclorídrico (DAPI), confirmou o padrão cariotípico descrito para a maioria das espécies do gênero, isto é, onze pares de cromossomos metacêntricos, muito semelhantes quanto ao comprimento e morfologia, e um par submetacêntrico, para todos os taxa estudados. A coloração com o fluorocromo forneceu definição clara das constrições secundárias, permitindo a diferenciação das espécies e procedências pelo número e posição das mesmas. As procedências de Pinus tecunumanii também se diferenciaram dos outros dois materiais em relação ao comprimento total do complemento haplóide. Os resultados obtidos suportam o “status” específico para o Pinus tecunumanii, bem como fornecem evidências de que além das mutações de ponto, alterações estruturais contribuíram para a diferenciação intra e interespecífica no gênero Pinus.

    Resumo em Inglês:

    ABSTRACT Karyotypic analysis of Pinus oocarpa Schiede ex Schltdl., Pinus patula Schltdl. & Cham. and of provenances Jócon Yoro, Las Camelias and San Rafael del Norte of Pinus tecunumanii Eguiluz & J. P. Perry were accomplished to provide information for definition of Pinus tecunumanii taxonomic status. Characterization of mitotic chromosomes stained with Giemsa and with 4’, 6-diamidino-2- phenylindoldihydrochlorid (DAPI) fluorochrome confirmed the karyotypic pattern reported for most of the Pinus species, which present eleven pairs of metacentric chromosomes, very similar in regard to length and morphology, and a submetacentric pair for all the taxa studied. Sharp definition of secondary constrictions revealed by DAPI staining allowed distinction of species and provenances by the number and position of this cytological marker. Pinus tecunumanii was also different from the other two species in regard to total length of haploid set. The results support the species status for Pinus tecunumanii as well as present evidence that in addition to point mutations, structural alterations contributed toward intra and interspecies differentiation into the genus Pinus.
  • DESEMPENHO DO Pinus echinata NA REGIÃO CENTRAL DO ESTADO DO RIO GRANDE DO SUL, BRASIL Nota Técnica

    Schneider, Paulo Renato; Farias, Jorge; Finger, César Augusto Guimarães; Schneider, Paulo Sérgio Pigatto; Fleig, Frederico Dimas; Thomas, Cláudio; Pedroso Filho, Juarez Iensen

    Resumo em Português:

    RESUMO Neste trabalho, estudou-se o crescimento e a produção em povoamento de Pinus echinata Mill. O povoamento foi instalado em 1996 em espaçamento de 3,0 x 2,0 metros, no município de Boqueirão do Leão, no estado do Rio Grande do Sul, Brasil. Para o estudo, foram instaladas seis unidades amostrais, onde foram medidas e abatidas seis árvores de diâmetro médio e de altura dominante para análise de tronco. Os resultados obtidos indicam que a espécie apresenta bom potencial de crescimento em diâmetro, altura e volume. Aos 12 anos de idade, o povoamento apresentou um diâmetro médio de 18,4 cm, altura média de 12,6 m, altura dominante de 14,1 m, área basal de 42,3 m2.ha-1, volume total com casca de 248,2 m3.ha-1 e um incremento médio anual de 20,7 m3.ha-1.ano-1. Tais resultados iniciais indicam que a espécie apresenta potencial de crescimento e produção, podendo ser indicada para cultivo no estado do Rio Grande do Sul.

    Resumo em Inglês:

    ABSTRACT In this work, the growth and the yield of a Pinus echinata Mill. stand were studied. The stand was implanted in 1996 in spacing of 3,0 x 2,0 meters, at Boqueirão do Leão, in Rio Grande do Sul, Brazil. For the study, 6 sample units were installed, and 6 trees of average diameter and dominant height were cut down for trunk analysis. Results indicated that the species presents a good growth in diameter, height and volume. At 12 years-old, the stand presented an average diameter of 18.4 cm, an average height of 12.6 m, a dominant height of 14.1 m, a basal area of 42.3 m2.ha-1, total volume with rind of 248.2 m3.ha-1 and an average annual increment of 20.7 m3.ha-1.yr-1. These initial findings indicate that the species bears a great potential for growth, what enables it to thrive in some regions of Rio Grande do Sul.
  • ANÁLISE TÉCNICA E ECONÔMICA DE PRESTADORES DE SERVIÇOS NA COLHEITA FLORESTAL Nota Técnica

    Morais Filho, Abilio Donizetti de; Seixas, Fernando

    Resumo em Português:

    RESUMO Este estudo analisou as condições de trabalho de empresas prestadoras de serviços do setor de colheita florestal, abordando os aspectos econômicos, as condições dos equipamentos, os custos operacionais e, por fim, as oportunidades de crédito para investimento em tecnologia. Foram analisadas em profundidade cinco empresas cujo faturamento anual variou entre R$ 1.020.000,00 e R$ 4.313.000,00, com uma média de R$ 2.373.000,00. O número de funcionários ficou entre 33 e 181, sendo as empresas classificadas como: uma pequena, duas médias e duas grandes. O elevado investimento inicial necessário, juros superiores a 12% e ausência de garantias contratuais com duração compatível com o período do financiamento dificultam o acompanhamento da evolução tecnológica disponível por parte do prestador de serviços. Verificou-se também que os empresários do setor não incluem a remuneração do capital e uma correta depreciação dos bens nas planilhas de custos, prejudicando a renovação dos equipamentos e levando ao envelhecimento das máquinas utilizadas na produção, com idade média geralmente superior a 10 anos. Concluiu-se que os custos estavam acima dos valores pagos pelos serviços quando computados esses fatores citados anteriormente, com três empresas apresentando resultados negativos nas análises financeiras. Finalmente, observou-se que a mecanização proporcionou melhorias na qualidade de vida dos funcionários dessas empresas, com a renda per capita anual dos trabalhadores em torno de R$ 8.083,08.

    Resumo em Inglês:

    ABSTRACT The objective of this study was to describe the financial conditions of forestry contractors, concerning life quality aspects, condition of work and equipments, operational costs, and economic credit to invest in new technologies. Five companies had been analyzed, with an annual income between US$ 400,000.00 and US$ 1,720,000.00, with an average of US$ 950,000.00. The number of employees varied between 33 and 181, and the companies were classified in terms of size as: one small, two average, and two big. The main difficulties to invest in new machines were high financial taxes, more than 12% an year, and a lack of long term contracts to guarantee the payment capability. It was observed that the contractors did not consider the capital remuneration and a correct depreciation of machines, resulting in an average machine life higher than 10 years. The final conclusions were that the costs were above the paid values for the services, when computed the depreciation and capital remuneration, with negative results in the financial analyzes of three companies. Finally, the mechanization process increased the workers life quality, however, the annual income was around US$ 2,112.00 per worker, approximately 39% lower than the average Brazilian population.
Universidade Federal de Santa Maria Av. Roraima, 1.000, 97105-900 Santa Maria RS Brasil, Tel. : (55 55)3220-8444 r.37, Fax: (55 55)3220-8444 r.22 - Santa Maria - RS - Brazil
E-mail: cienciaflorestal@ufsm.br