Acessibilidade / Reportar erro
Ciência Florestal, Volume: 22, Número: 1, Publicado: 2012
  • GERMINAÇÃO E PROPAGAÇÃO IN VITRO DE CEREJEIRA ( Amburana acreana (Ducke) A.C. Smith - FABACEAE) Artigos

    Fermino Junior, Paulo Cesar Poeta; Scherwinski-Pereira, Jonny Everson

    Resumo em Português:

    RESUMO A cerejeira (Amburana acreana (Ducke) A.C. Smith) é uma espécie arbórea nativa da Amazônia Sul- Ocidental de grande importância madeireira, no entanto, encontra-se ameaçada de extinção. A propagação por cultura de tecidos desta espécie é de grande importância devido às dificuldades de coleta de sementes. Os objetivos deste trabalho foram avaliar a germinação in vitro e estabelecer protocolos para multiplicação e enraizamento in vitro de brotos de cerejeira. Para a germinação in vitro foram avaliadas diferentes concentrações salinas do meio MS e WPM (Woody Plant Medium). Foram utilizados segmentos nodais de plântulas germinadas in vitro para a multiplicação de brotos, onde se testaram diferentes concentrações de BAP (0; 0,25; 0,5; 1,0; 2,0; 4,0; 8,0 mg.L-1) combinadas com ANA (0,1 mg.L-1). O enraizamento in vitro foi induzido com meio WPM/2, acrescido de 0,2 mg.L-1 de carvão ativado, suplementado com diferentes concentrações de AIB (0; 0,5; 1,0; 2,0 mg.L-1). O maior percentual de germinação in vitro foi obtido com o meio MS/2. A formação do maior número de brotos ocorreu com a concentração de BAP de 4,0 mg.L-1. A formação do maior número de raízes ocorreu com 0,5 mg.L-1 de AIB. As plântulas foram aclimatizadas em casa de vegetação com percentual de 54% de sobrevivência. A propagação in vitro da cerejeira é uma tecnologia viável para a produção de mudas apesar das dificuldades na sobrevivência de plantas em casa de vegetação.

    Resumo em Inglês:

    ABSTRACT Cerejeira (Amburana acreana) is a woody native tree species from south-western Amazon Region of a great importance and endangered. The propagation by tissue culture of this species is of a great importance because the difficulties of its seed collection. The purpose of this study was to evaluate the in vitro germination and to establish a protocol for in vitro multiplication and rooting. For in vitro germination, the salt concentrations of MS and WPM (Woody Plant Medium) were evaluated. For in vitro multiplication of shoots it was used nodal segments of in vitro seedlings. The propagation media were composed of WPM salts, supplemented with different BAP concentrations (0, 0.25, 0.5, 1.0, 2.0, 4.0, 8.0 mg.L-1) and 0.1 mg L-1 of NAA. The in vitro rooting was induced in half strength WPM salts, plus 0.2 mg L-1 activated charcoal and supplemented with different IBA concentrations (0, 0.5, 1.0, 2.0 mg.L- 1). The highest percentage of in vitro germination was obtained in the MS/2 medium. The formation of largest number of shoots occurred with 4.0 mg L-1 BAP. The formation of a greater number of roots occurred with 0.5 mg L-1 of IBA. The plantlets were air-conditioned in a greenhouse with 54% of survival rate. The in vitro propagation of Cerejeira is a viable technology for the production of seedlings in spite of the difficulties in the survival of plants in the greenhouse.
  • MINIESTAQUIA DE Eucalyptus benthamii × Eucalyptus dunnii: (I) SOBREVIVÊNCIA DE MINICEPAS E PRODUÇÃO DE MINIESTACAS EM FUNÇÃO DAS COLETAS E ESTAÇÕES DO ANO Artigo

    Brondani, Gilvano Ebling; Wendling, Ivar; Grossi, Fernando; Dutra, Leonardo Ferreira; Araujo, Marla Alessandra

    Resumo em Português:

    RESUMO O trabalho teve como objetivo avaliar a técnica de miniestaquia na clonagem de Eucalyptus benthamii × Eucalyptus dunnii ao longo das estações do ano quanto à sobrevivência de minicepas e à produção de miniestacas. As minicepas dos clones H12, H19 e H20 foram manejadas durante 352 dias em minijardim clonal sob sistema semi-hidropônico em leito de areia com solução nutritiva fornecida por gotejamento, efetuando-se 27 coletas sucessivas de brotações durante as quatro estações do ano (primavera, verão, outono e inverno). O experimento foi conduzido no delineamento inteiramente casualizado contendo cinco repetições e quatro minicepas por repetição. As minicepas apresentaram elevado percentual de sobrevivência (89,68%) após 27 coletas sucessivas de brotações, indicando alta longevidade como fontes fornecedoras de propágulos. A produção de miniestaca variou conforme o clone e mostrou-se sensível às estações do ano e às oscilações da temperatura. A maior produção ocorreu nas estações consideradas mais quentes (primavera e verão) com variação de 635,42 a 852,64 miniestacas m-2, e a menor nas estações mais frias (outono e inverno) com 592,38 a 629,36 miniestacas m-2. A produção anual de miniestacas foi de 18.934,76; 20.942,27 e 20.748,14 miniestacas m-2 ano-1, respectivamente para os clones H12, H19 e H20.

    Resumo em Inglês:

    ABSTRACT This study aimed to evaluate, throughout the seasons, the mini-cutting technique as cloning method for Eucalyptus benthamii × Eucalyptus dunnii hybrids regarding to the mini-stumps survival and to the mini- cuttings production. The ministumps of H12, H19 and H20 clones were cultivated during 352 days in a clonal mini-garden under semi-hydroponic system in a sand bed, where the nutritive solution was supplied by drip irrigation. During the experiment, 27 successive mini-cuttings samplings were performed in four seasons of the year: spring, summer, autumn and winter. The experiment was conducted under whole a randomized design with five replications and four mini-stumps per replication. After 27 successive mini- cuttings samplings, the mini-stumps presented high survival percentage (89.68%), which indicated their high longevity as sprouts supply sources. The mini-cuttings production varied in function of the clone and presented a high sensitivity of seasons and temperature variations. The highest mini-cutting production occurred in warmer seasons (spring and summer), with 635.42 until 852.64 mini-cuttings m-2 variation, and the lowest in the cooler seasons (autumn and winter), with 592.38 until 629.36 mini-cuttings m-2 variation. The mini-cutting annual production was 18,934.76; 20,942.27 and 20,748.14 mini-cuttings m-2 year-1 for H12, H19 and H20 clones, respectively.
  • ANÁLISE DA ESTRUTURA DA PAISAGEM DO PARQUE NACIONAL DO SUPERAGÜI - PR E SUA ZONA DE AMORTECIMENTO Artigo

    Grise, Mayssa Mascarenhas; Biondi, Daniela

    Resumo em Português:

    RESUMO O Parque Nacional do Superagüi está localizado no litoral norte do Estado do Paraná, maior área contínua remanescente de Floresta Atlântica do país, bioma este entre os mais ameaçados do mundo. Esta área abrange o litoral norte do Estado e compreende uma série de unidades de conservação de diferentes categorias, sendo a Área de Proteção Ambiental de Guaraqueçaba a de maior extensão, sobrepondo-se às demais. O presente trabalho teve como objetivo analisar a estrutura da paisagem (matriz e fragmentos) do PN do Superagüi e sua zona de amortecimento. A partir da classificação supervisionada da imagem digital Landsat 5 TM, foi feita a classificação da cobertura do solo da área e definidos os atributos de área e perímetro dos polígonos obtidos. Feita a análise da estrutura da paisagem, constatou-se que a matriz do Parque é formada por vegetação nativa interrompida pela presença de fragmentos. Cerca de 7% da área de estudo é formado por fragmentos, os quais pertencem às classes de vegetação alterada, solo descoberto, áreas urbanizadas, areia e água; em grande parte possuem menos de um hectare e têm forma regular. A zona de amortecimento do Parque não está totalmente inserida dentro dos limites da APA Federal de Guaraqueçaba, sendo que grande parte da zona de amortecimento é formada por áreas marinhas. Conclui-se que a análise da estrutura da paisagem, através de seus componentes estruturais matriz e fragmentos, é um subsídio eficaz para verificar a funcionalidade da cobertura do solo da UC e sua zona de amortecimento.

    Resumo em Inglês:

    ABSTRACT The National Park of Superagüi is located on the north coast of Paraná state. It is the largest continuous area of the Atlantic Forest remaining in the country and this biome is among the most threatened ones in the world. This area covers the north coast of the state and includes several conservation units of different categories, and the Environmental Protection Area of Guaraqueçaba, is the largest one. The objective of this study was to analyze the landscape structure (matrix and patches) of the National Park of Superagüi, and its buffer zone. The classification of land cover and the definition of the attributes of the area and perimeter were made using a digital image Landsat 5 TM. According to the landscape structure analysis, it was observed that the Park matrix is formed by native vegetation interrupted by the presence of patches. Approximately 7% of the studied area is composed by fragments, which belong to class of changed vegetation, exposed soil, urban areas, sand and water; mostly have less than one hectare and have a regular shape. The Park buffer zone is not fully incorporated within the limits of Environmental Protection Area of Guaraqueçaba, where marine areas form a great portion. It follows that landscape structure analysis, through its structural components matrix and patches, is an efficient subsidy to verify the park land cover functionality and its buffer zone.
  • CRESCIMENTO DE MUDAS DE Gleditschia amorphoides Taub. PRODUZIDAS EM DIFERENTES SUBSTRATOS Artigo

    Bortolini, Michele Fernanda; Koehler, Henrique Soares; Zuffellato-Ribas, Katia Christina; Fortes, Andréa Maria Teixeira

    Resumo em Português:

    RESUMO Popularmente conhecida como sucará, Gleditschia amorphoides é uma espécie que, além do uso madeireiro, pode ser utilizada em plantios destinados à recuperação de áreas degradadas, assim, o objetivo deste trabalho foi avaliar o crescimento das mudas, ao longo do tempo, produzidas em diferentes substratos. O experimento foi realizado no viveiro da UNIOESTE em Santa Helena - PR, utilizando-se de semeadura direta em tubetes de polipropileno de 200 cm3. Foram testadas diferentes misturas como substrato, contendo Plantmax(r), resíduo de folha decomposto, serragem, cama de aviário, esterco bovino e casca de arroz carbonizada. Mensalmente, durante 180 dias, foram avaliadas altura e diâmetro do colo, sendo estes analisados segundo um delineamento de blocos casualizados, com 5 repetições de 12 mudas, em um esquema de parcelas subdivididas no tempo. No término do experimento foi avaliada a massa seca das raízes e da parte aérea, a relação entre estas variáveis e a área foliar, para 12 mudas por tratamento, seguindo um delineamento inteiramente casualizado. Determinou-se a capacidade de retenção de água, porosidade total e pH dos substratos. Todos os dados foram submetidos à análise de variância e as médias comparadas pelo teste Tukey. Em geral todos os substratos proporcionaram aumento gradativo no diâmetro e na altura das mudas. Mudas produzidas em 50 % de Plantmax(r) + 20 % de casca de arroz carbonizada + 30 % esterco bovino apresentaram maior diâmetro (4,5 mm) e altura das mudas (22,7 cm), assim como maior massa seca da raiz e da parte aérea (0,88 e 1,62 g, respectivamente), seguido de mudas produzidas em 50 % Plantmax(r) + 20 % de casca de arroz carbonizada + 20 % esterco bovino + 10 % de resíduo de folhas com 4,0 mm e 19,7 cm, para diâmetro e altura, respectivamente. Nas condições deste experimento as mudas de sucará, produzidas com 50 % de Plantmax(r) + 20 % de casca de arroz carbonizada + 30 % esterco bovino, apresentaram maior crescimento.

    Resumo em Inglês:

    ABSTRACT Locally known as sucará, Gleditschia amorphoides besides being a woody species, it can be used in plantations used for the rehabilitation of degraded areas. Therefore, the objective of the current work was to evaluate the seedling growth, over time produced under different substrates. The experiment was made at the UNIOESTE nursery in Santa Helena district, in Paraná state, using direct sowing in polypropylene sized tubes of 200cm3. Different mixtures were tested as substrate, containing Plantmax(r), decomposed leaves residue, sawdust, litter, cattle manure and carbonized rice hulls. Monthly, during 180 days, evaluations of height and diameter of the lap were made, analyzed by a completely randomized design, with 5 replicates of 12 seedlings, in a subdivided plot scheme in time. At the end of the experiment, root dry mass and aerial part dry mass, the relation between these variables and the leaf area, were determined for 12 seedlings each treatment, in a completely randomized design. The water-holding capacity, substrate total porosity and pH were determined. All data were submitted to variance analysis and the means compared by the Tukey's test. In general, all substrates provided gradual increase in the diameter of the lap and seedling height. Seedlings produced in 50% of Plantmax(r)+ 20% of carbonized rice hulls + 30% of cattle manure provided bigger diameter (4,5mm) and seedlings height (22,7 cm), as well as bigger root dry mass and aerial part dry mass (0,88 and 1,62g, respectively) followed by seedlings produced in 50% of Plantmax(r)+ 20% of carbonized rice hulls + 20% of cattle manure + 10% leaf residue with 4,0mm and 19,7mm, for diameter and height respectively. In these experimental conditions, Sucará seedlings produced in 50% of Plantmax(r)+ 20% of carbonized rice hulls + 30% of cattle manure presented bigger growth.
  • FENOLOGIA DA ANDIROBA ( Carapa guianensis, Aubl ., MELIACEAE) NO SUL DO ESTADO DE RORAIMA Artigo

    Pereira, Maria Rutinéia Nobre; Tonini, Helio

    Resumo em Português:

    RESUMO O presente estudo foi realizado com o objetivo de estudar o padrão fenológico da espécie arbórea Carapa guianensis, Aubl., em floresta natural localizada no sul do estado de Roraima, procurando relacionar a frequência de ocorrência das fenofases às condições pluviométricas do período. Para o levantamento fenológico foram selecionados 20 indivíduos adultos localizados em uma parcela permanente de 9 ha. As observações fenológicas ocorreram quinzenalmente de fevereiro de 2006 a fevereiro de 2009, registrando-se a presença ou ausência dos eventos de floração, frutificação e mudança foliar para cada árvore. Para analisar a influência da precipitação na fenologia da espécie foi utilizado o coeficiente de correlação de Spearman e, para estimar a sincronia dos eventos fenológico utilizou-se o índice de sincronia da população (Z). A floração da andiroba mostrou-se subanual, sincrônica e correlacionada negativamente com precipitação no período do evento fenológico. Foram observados dois ciclos de floração, sendo um longo com inicio em outubro, estendendo-se para o ano seguinte, por um período médio de 9 meses, e um curto com duração de dois meses (julho a agosto). A frutificação é anual, longa e sincrônica, e correlacionou-se positivamente com a precipitação. A época ideal para a coleta dos frutos maduros no local estudado é durante o período chuvoso, que compreende abril a julho. A emissão de folhas ocorreu de forma contínua e não se correlacionou com a precipitação. Observou-se uma maior proporção de indivíduos perdendo folhas, entre os meses de agosto a novembro, que caracterizam um período de transição entre a época seca e chuvosa, com sensível redução de precipitação.

    Resumo em Inglês:

    ABSTRACT This work was carried out in order to study the phenological pattern of Andiroba in natural forest located in the south of Roraima state, seeking to relate the frequency of phenol-phases occurrence with the rain rate in this period. For the phenological survey 20 adult trees were selected in a permanent sample plot of 9ha. The visits to phenological observations occurred fortnightly from February 2006 to December 2008, recording the presence or absence of flowering, fruiting and leaf change events for each tree. The Spearman correlation was used for analyzing the influence of rainfall on phenology and, the index of synchrony of population (Z) was used for estimating the synchrony of phenological events. The flowering of Andiroba showed to be sub-annual, synchronous and was negatively correlated with the rainfall during the phenological event. Two cycles of flowering were observed: a long one from October until next year, which lasts about nine months, and a short one lasting two months, from July to August. The fruiting is annual, long and synchronous and it was positively correlated with rainfall. The ideal time for collecting ripe fruits at the study site is during the rainy time, that is, from April to July. The leaf flushing was continuous and did not correlate with the rainfall. It was noticed a higher proportion of trees falling leaves between August and November, which characterizes a period of transition between the dry and the rainy period with sensitive reduction of rainfalls.
  • APORTE E DECOMPOSIÇÃO DE SERAPILHEIRA EM FLORESTA PERIODICAMENTE INUNDÁVEL NA RESTINGA DA MARAMBAIA, RJ Artigo

    Pereira, Marcos Gervasio; Silva, Avelino Nogueira; Paula, Ranieri Ribeiro; Menezes, Luiz Fernando Tavares

    Resumo em Português:

    RESUMO As áreas de restingas são ambientes frágeis, que desde a colonização do país, vêm sendo submetidas a pressões antrópicas. Para que medidas mitigatórias possam ser tomadas, é necessário que sejam desenvolvidos estudos para uma melhor compreensão dos processos ecológicos nestes ambientes. Desta forma, este estudo teve como objetivo quantificar o aporte de serapilheira e nutrientes e sua decomposição numa floresta periodicamente inundada na restinga da Marambaia, RJ. Na área foram instalados dez coletores cônicos e 30 litter bags. O aporte anual de serapilheira foi de 7,64 Mg.ha-1, sendo setembro o mês de maior aporte. O nitrogênio foi o elemento devolvido ao solo em maior quantidade (71,9 kg ha-1 ano-1), seguido pelo potássio (41,1 kg ha-1 ano-1). A velocidade de decomposição da serapilheira foi de 0,0015 g g-1 dia-1 e o tempo de meia vida de 462 dias. O K foi o elemento que apresentou as maiores perdas em comparação ao demais. A celulose apresentou-se como maior participante na estrutura da serapilheira foliar, seguida pela lignina, sendo essa última associada à textura coriácea das folhas nesta formação.

    Resumo em Inglês:

    ABSTRACT Restinga (sandbank) areas are fragile environments, which have been subjected to anthropogenic pressures since the country colonization. So that mitigate actions can be taken, it must be developed studies to better understand the ecological processes in these environments. Thus, this study aims to quantify litter and nutrients devolution and litter decomposition in a periodically flooded forest in 'Restinga da Marambaia', Rio de Janeiro. In the study area 10 conic collectors and 30 litter bags were installed. The annual litter devolution was 7.64 Mg.ha-1, and September was the highest contribution month. Nitrogen was the element returned to the soil to a higher amount (71.9 kg ha-1 yr-1), followed by potassium (41.1 kg ha-1 yr-1). Litter decomposition rate 0.0015 g g-1 day-1 and the half- life were 462 days. Potassium was the element that showed the highest losses in comparison to the others. Cellulose appeared as a major participant in the structure of leaf litter, followed by lignin, the latter being associated with the leathery texture of the leaves in this formation.
  • ÓLEO ESSENCIAL DE Eucalyptus grandis Hill ex Maiden NO ESTÍMULO À MICORRIZAÇÃO DE MUDAS DE SIBIPIRUNA (Caesalpinia peltophoroides Benth.) Artigo

    Steffen, Ricardo Bemfica; Antoniolli, Zaida Inês; Steffen, Gerusa Pauli Kist; Silva, Rodrigo Ferreira da

    Resumo em Português:

    RESUMO Os metabólitos secundários extraídos de espécies florestais formadoras de ectomicorrizas podem estimular a simbiose entre fungos ectomicorrízicos e espécies florestais nativas do Rio Grande do Sul. O objetivo deste trabalho foi determinar o efeito do óleo essencial de eucalipto na formação de associação ectomicorrízica e no crescimento de mudas de sibipiruna, em condições de casa de vegetação. Plântulas de sibipiruna foram submetidas a quatro tratamentos constituídos pela presença e ausência do inóculo ectomicorrízico Pisolithus microcarpus (Cooke & Massee) e aplicação ou não do óleo essencial de eucalipto. O óleo essencial foi solubilizado e aplicado com pulverizador manual nos períodos de 0, 7 e 14 dias a contar da data de transplante das plântulas. Utilizou-se o delineamento inteiramente casualizado com sete repetições. Decorridos 90 dias de crescimento, as mudas foram coletadas e avaliou-se altura, diâmetro do colo, comprimento de raízes, massa seca da parte aérea e porcentagem de colonização micorrízica. A aplicação do óleo essencial de eucalipto favoreceu a ocorrência de associação ectomicorrízica, com Pisolithus microcarpus em mudas de sibipiruna, proporcionando aumento significativo no desenvolvimento da parte aérea das mudas.

    Resumo em Inglês:

    ABSTRACT The secondary metabolites extracted from forest species forming ectomycorrhizal could stimulate the symbiosis between ectomycorrhizal fungi and natives forest species of Rio Grande do Sul state. The aim of this work was to evaluate ectomycorrhizal association and the seedlings growth of inoculated and non-inoculated Sibipiruna with Pisolithus microcarpus (Cooke & Massee) ectomycorrhizal fungus and submitted and not submitted to the application of the essential oil of Eucalyptus grandis, in greenhouse conditions. The essential oil was solubilized and applied with manual spray during periods of 0, 7 and 14 days from the date of seedlings transplanting. A randomized design with seven repetitions was used. After 90 days of plant growth, it was evaluated the seedling colonization degree, the height, the stem diameter, the root length and the dry mass of shoots. The eucalyptus essential oil stimulates the occurrence of ectomycorrhizal on Sibipiruna seedlings, thus providing high seedling development when inoculated with Pisolithus microcarpus.
  • INFLUÊNCIA DE VARIÁVEIS AMBIENTAIS SOBRE O PADRÃO ESTRUTURAL E FLORÍSTICO DO COMPONENTE ARBÓREO, EM UM FRAGMENTO DE FLORESTA OMBRÓFILA MISTA MONTANA EM LAGES, SC Artigo

    Higuchi, Pedro; Silva, Ana Carolina da; Ferreira, Tiago de Souza; Souza, Sheila Trierveiler de; Gomes, Juliano Pereira; Silva, Karina Montibeller da; Santos, Kristiana Fiorentin dos; Linke, Caroline; Paulino, Patrícia da Silva

    Resumo em Português:

    RESUMO O objetivo deste trabalho foi caracterizar a composição florística e a estrutura do componente arbóreo de um fragmento de Floresta Ombrófila Mista Montana e avaliar a influência de variáveis ambientais sobre os padrões encontrados. A área de estudo situa-se no município de Lages, SC, às margens do Rio Caveiras (27°51'19.20"S e 50°10'33,39"W). O levantamento da vegetação e das variáveis ambientais (características químicas e físicas dos solos, relevo e cobertura do dossel) foi realizado em 50 parcelas permanentes de 20x10 m, alocadas de forma sistemática estratificada no fragmento. Todas as árvores vivas com circunferência ≥ 15,7 cm (medidas a 1,30 m do solo - CAP) foram mensuradas (CAP e altura) e identificadas. Foi calculado o valor de importância (VI) das espécies encontradas, realizada a ordenação das parcelas em função da abundância das espécies, por meio da analise de NMDS (Nonmetric multidimensional scalling) e plotadas a posteriori as variáveis ambientais significativas no diagrama de ordenação. Foram amostrados 1.843 indivíduos, que totalizaram uma área basal de 36,45 m2/ha, distribuídos em 37 famílias botânicas, 63 gêneros e 92 espécies. As três espécies com os maiores valores de VI foram Araucaria angustifolia (Bertol.) Kuntze, Lithraea brasiliensis Marchand e Jacaranda puberula Cham. As variáveis que apresentaram maior correlação com a estrutura e a composição florística do componente arbóreo foram o pH, o desnível máximo da parcela e o teor de Mg.

    Resumo em Inglês:

    ABSTRACT This study aimed to characterize the floristic composition and structure of the tree component of a montane Araucaria Forest fragment and to assess the influence of environmental variables on the patterns observed. The study area was located in the municipality of Lages, Santa Catarina state, close to the margin of the Caveiras River. The vegetation and the environmental variables (physical and chemical soils characteristics, relief and canopy cover) were surveyed within 50, 20 x 10m, permanent plots allocated systematically stratified in the forest fragment. All trees with circumference at breast height (CBH) ≥ 15,7 cm were measured (CBH and height) and identified. The importance values (IV) of the found species were calculated, the plots and species were ordinated by an analysis of NMDS (Nonmetric Multidimensional Scaling), according to the abundance of species, and the significant environmental variables plotted "a posteriori" in the ordination diagram. One thousand, eight hundred and forty-three (1,843) individuals were sampled, which added up to a total basal area of 36.45 m2, distributed in 37 botanical families, 63 genera and 92 species. The three species with the highest values of VI were Araucaria angustifolia (Bertol.) Kuntze, Lithraea brasiliensis Marchand and Jacaranda puberula Cham. The variables that showed the higher correlation with the tree component structure and floristic composition were the pH, the plot highest declivity and the Mg content.
  • COMPOSIÇÃO DO SUBSTRATO SOBRE O DESENVOLVIMENTO, QUALIDADE E CUSTO DE PRODUÇÃO DE MUDAS DE Eucalyptus grandis Hill ex Maiden × Eucalyptus urophylla S. T. Blake Artigo

    Simões, Danilo; Silva, Richardson Barbosa Gomes da; Silva, Magali Ribeiro da

    Resumo em Português:

    RESUMO Os componentes utilizados na produção de substratos influem diretamente no ciclo vegetativo, na qualidade e consequentemente nos custos de produção das mudas. Nesse experimento estudou-se o desenvolvimento, qualidade e custos de produção de mudas de Eucalyptus grandis Hill ex Maiden × Eucalyptus urophylla S. T. Blake, por meio de propagação sexuada, utilizando 12 composições de substrato. A análise dos resultados evidenciou que os substratos puros, a exceção da fibra de coco, não apresentaram características físicas adequadas para a produção de mudas, via sexuada, de Eucalyptus grandis Hill ex Maiden × Eucalyptus urophylla S. T. Blake em tubetes. Os melhores resultados foram obtidos nos substratos com mistura 1:1 de casca de arroz carbonizada e fibra de coco e na mistura 1:1 de vermiculita e fibra de coco, devido às melhores características morfológicas apresentadas e da possibilidade de redução do tempo de produção, levando à redução no custo final das mudas.

    Resumo em Inglês:

    ABSTRACT The components used in the production of substrates influence directly the growth cycle, quality and consequently the cost of production of seedlings. In this experiment we studied the development, quality and cost of Eucalyptus grandis Hill ex Maiden × E. urophylla S. T. Blake, through sexual propagation using 12 compositions of substrate. The results showed that the pure substrates, with the exception of coconut fiber, did not present physical characteristics appropriate for the production from seedlings of eucalyptus in container, with the best results obtained for the substrates with a mixture 1:1 of carbonized rid of rice and coconut-fiber and a mixture 1:1 of vermiculite and coconut fiber, due to the best morphological characteristics and the possibility of reducing the production period which enables a reduction in the cost of final seedling.
  • AUSÊNCIA DE ESTABILIZAÇÃO DA CURVA DE ACUMULAÇÃO DE ESPÉCIES EM FLORESTAS TROPICAIS Artigo

    Schilling, Ana Cristina; Batista, João Luis Ferreira; Couto, Hilton Zarate do

    Resumo em Português:

    RESUMO A definição do tamanho da amostra é um dos principais problemas em levantamentos fitossociológicos. A curva de acumulação de espécies é comumente utilizada para definir a suficiência amostral, mas este método apresenta algumas limitações, como a ausência de um ponto de estabilização que possa ser determinado objetivamente e a arbitrariedade da ordem de entrada das unidades amostrais na construção da curva. Uma solução para esse problema é o uso de procedimentos de aleatorização, como a permutação, para obter curvas médias de acumulação de espécies e seus intervalos de confiança empíricos. Entretanto, esse procedimento enfatiza o caráter assintótico da curva, que não apresenta ponto de inflexão, tornando-se impossível a determinação de um ponto objetivo para avaliar o tamanho ótimo da amostra.

    Resumo em Inglês:

    ABSTRACT The definition of the sample size is a major problem in studies of phytosociology. The species accumulation curve is used to define the sampling sufficiency, but this method presents some limitations such as the absence of a stabilization point that can be objectively determined and the arbitrariness of the order of sampling units in the curve. A solution to this problem is the use of randomization procedures, e.g. permutation, for obtaining a mean species accumulation curve and empiric confidence intervals. However, the randomization process emphasizes the asymptotical character of the curve. Moreover, the inexistence of an inflection point in the curve makes it impossible to define objectively the point of optimum sample size.
  • AVALIAÇÃO DA AMOSTRAGEM ALEATÓRIA DE RAMOS PARA QUANTIFICAR A PRODUÇÃO DE FRUTOS DE Caryocar brasiliense Camb. (CARYOCARACEAE) Artigo

    Borges, Lívia Marques; Rezende, Alba Valéria; Nogueira, Gilciano Saraiva

    Resumo em Português:

    RESUMO Estudos sobre técnicas de amostragem adequadas e precisas para quantificar a produção de frutos de espécies nativas do Cerrado ainda são muito raros, o que configura uma lacuna para a formulação de Planos de Manejo Sustentáveis para o Bioma. Este estudo foi realizado em uma área de cerrado sensu stricto, localizada na Reserva Ecológica e Experimental da Universidade de Brasília, Distrito Federal, com o objetivo de avaliar a eficiência da amostragem aleatória de ramos para quantificar a produção de frutos de Caryocar brasiliense Camb. (pequi). Na área de cerrado sensu stricto previamente inventariada floristicamente, foi selecionado um indivíduo de Caryocar brasiliense em período de frutificação para aplicação da amostragem aleatória de ramos. A produção de frutos foi estimada pelo método de amostragem aleatória de ramos, testada por duas técnicas de seleção de ramos: probabilidade uniforme e probabilidade proporcional ao diâmetro do ramo. A validação do método foi feita pela comparação com a produção real quantificada pelo censo dos frutos. O erro de amostragem para uma intensidade amostral de dez caminhos foi igual a 99,92 % usando a técnica de probabilidade uniforme para seleção de ramos e igual a 61,45 % usando a técnica de probabilidade proporcional ao diâmetro. Concluiu-se que a amostragem aleatória de ramos, empregando as técnicas de probabilidade uniforme e de probabilidade proporcional ao diâmetro, foi imprecisa e inexata para o caso estudado. Por essa razão, é necessário realizar novos estudos e propor modificação na técnica de amostragem aleatória de ramos que permita gerar estimativas da produção de frutos de Caryocar brasiliense com pequeno erro de tendência e de amostragem.

    Resumo em Inglês:

    ABSTRACT Studies on sampling techniques appropriate and accurate for measuring the yield of native species of Cerrado are still very rare, constituting a gap in the formulation of Sustainable Management Plans for the Biome. This study was conducted in an area of cerrado sensu stricto, located in the Experimental Ecological Reserve of the University of Brasilia, Federal District, with the objective of evaluate the efficiency of randomized branch sampling to quantify the yield of fruits of Caryocar brasiliense Camb. (Pequi). After a floristic inventory in the area of cerrado sensu stricto, it was selected one tree of Caryocar brasiliense in the fruiting period for application of randomized branch sampling. The production of fruits of Pequi was estimated by randomized branch sampling, tested by two techniques of selection of branches: uniform probability and probability proportional to the diameter of the branch. The validation of the method was made by comparison with the actual production, defined by the total count of fruits. The sampling error for a sampling intensity of ten paths was equal to 99.92%, using the technique of uniform probability and equal to 61.45%, using the technique of probability proportional to the diameter of the branch. It was concluded that the randomized branch sampling, using the techniques of uniform probability and probability proportional to its diameter, was imprecise and inaccurate for the study case. For this reason, it is necessary to carry out further studies and some modification on the technique that allows generate estimates of the fruit production of Caryocar brasiliense with small errors and without tendency.
  • EFICIÊNCIA DE UM MODELO DE AFILAMENTO AJUSTADO SEM E COM ESTRATIFICAÇÃO POR CLASSE DE QUOCIENTE DE FORMA PARA FORMAÇÃO DOS SORTIMENTOS DE Pinus taeda L. Artigo

    Souza, Carlos Alberto Martinelli de; Finger, César Augusto Guimarães; Schneider, Paulo Renato; Silva, Gilson Fernandes da; Thomas, Claúdio

    Resumo em Português:

    RESUMO Os objetivos deste trabalho foram modelar a forma de tronco de Pinus taeda L., comparar a eficiência na estimativa do volume total do polinômio do quinto grau ajustado com dados não estratificados e estratificados segundo quocientes de forma e apresentar os resultados em forma de tabela de sortimentos. As árvores amostradas foram medidas em povoamentos manejados para serraria, com dois desbastes, sendo o plantio inicial de 1.600 árvores/ha, em espaçamento de 2,50 x 2,50 m, localizados na Klabin S.A., em Telêmaco Borba-PR. Para fins de modelagem os dados foram estratificados em classes de quociente de forma calculado a 70% da altura. A classificação das partes do tronco em sortimentos foi acurada sendo que o volume estimado a partir das integrais das equações de afilamento apresentou valores residuais pequenos e sem tendências, comprovando a viabilidade da estratificação dos dados em classes de quociente de forma quando do ajuste de equações para a obtenção dos sortimentos.

    Resumo em Inglês:

    ABSTRACT The objective of this paper was model the shape, compare the efficiency of the total volume estimated with the 5th grade polynomial, with and without data stratification by an artificial form quotient and build the assortment table. The data came from Pinus taeda L. stands, managed by a sawmill company, with two thinning and coppicing, plantation of 1.600 trees/ha and spacing of 2,50 x 2,50 m, from Klabin S.A., in Telêmaco Borba, Paraná state. The field data was stratified in three form quotient classes defined by the diameter of 70% total height and breast height diameter. The trunk classification in assortments was accurate and the volume obtained with the integrated equations presented small residues, without tendency. The results proved the viability of the data stratification by form quotients to obtain better estimative of tree assortments.
  • TAXA DE CORTE SUSTENTÁVEL PARA MANEJO DAS FLORESTAS TROPICAIS Artigo

    Braz, Evaldo Muñoz; Schneider, Paulo Renato; Mattos, Patricia Povoa de; Selle, Gerson Luiz; Thaines, Fabio; Ribas, Luciano Arruda; Vuaden, Elisabete

    Resumo em Português:

    RESUMO Existe uma grande lacuna dos planos de manejo de florestas tropicais com relação à intensidade de extração e às taxas de corte, usualmente sendo definidas de forma arbitrária. Este trabalho visa definir intensidades de corte diferenciadas para grupos de espécies arbóreas comerciais, com diferentes ritmos de crescimento, por unidade de produção, no estado do Amazonas. Utilizou-se o incremento periódico anual percentual em volume, de 26 espécies arbóreas, obtido de parcelas permanentes. O incremento periódico anual, percentual em volume, para efeito diferenciador, considerou 1% como diferença limite. Foram identificadas três intensidades de corte, para as classes comerciais: 24,4% (grupo I), 35,4% (grupo II) e 42,4% (grupo III). Considerando a exploração total sustentável por hectare, para as 26 espécies, seria de 11,5 m³ ha-1 com intensidade de corte de 37%. O procedimento de cálculo é simples e pode ser utilizado pelos órgãos fiscalizadores, certificadores ou legisladores como balizador do ciclo de corte e taxa de corte.

    Resumo em Inglês:

    ABSTRACT There is a large gap in tropical forest management plans regarding to the intensity of logging and cutting rates. So far, it has been defined arbitrarily. This work aims at to define different cutting intensities for groups of tree species with different growth rhythm, in the state of Amazonas, Brazil. The study used the periodical annual increment, percentual in volume, of 26 species, obtained from permanent plots. The periodic increment percentage in volume for differentiating effect considered 1% difference as threshold. Three levels of logging intensity were identified for the commercial classes: 24.4% for group I, 35.4% for group II, and 42.4% for group III. The total sustainable cutting rate was 11.5m³ ha-1 with cut intensity of 37%. The cutting rate calculation procedure is very simple and can be used by forest law and monitoring institutions.
  • UTILIZAÇÃO DA MADEIRA DE CANAFÍSTULA (Peltophorum dubium (Spreng.) Taub.) NA CONFECÇÃO DE CHAPAS DE MADEIRA AGLOMERADAS Artigo

    Modes, Karina Soares; Vivian, Magnos Alan; Lilge, Daniela Silva; Melo, Rafael Rodolfo de; Santini, Elio José; Haselein, Clovis Roberto

    Resumo em Português:

    RESUMO A presente pesquisa objetivou avaliar preliminarmente o potencial de uso da madeira de canafístula (Peltophorum dubium (Spreng.) Taub.), para produção de chapas de partículas aglomeradas, coladas com adesivos à base de tanino e ureia-formaldeído, utilizados numa proporção de 9% com base no peso seco das partículas. Para cada tratamento, foram confeccionadas três chapas com densidade nominal de 0,63 g/cm³ de onde se extraíram corpos de prova para verificação das propriedades físicas de absorção d'água em peso e volume e inchamento em espessura por 2 e 24 horas de imersão em água, e as propriedades mecânicas de flexão estática (MOE e MOR), arrancamento de parafusos (RAP) e ligação interna (LI), segundo dimensões e procedimentos prescritos pela norma ASTM D-1037. Os resultados dos ensaios físico-mecânicos foram comparados com o padrão estabelecido pelas normas ANSI A208.1-1987 e DIN 68761 (1)-1961, (3)-1971. De uma maneira geral, o uso de adesivo à base de ureia resultou em chapas com tendência a maior absorção d'água, ao passo que os valores de inchamento em espessura para ambos os tratamentos, se mantiveram de acordo com a norma. Com exceção do MOR, os demais valores de resistência dos painéis confeccionados com adesivo à base de ureia-formaldeído ficaram abaixo do mínimo exigido pela norma. Para o adesivo à base de tanino, todas as propriedades foram superiores, com exceção da RAP. Esses resultados evidenciam que a madeira de canafístula, quando agregada com adesivo à base de tanino-formaldeído, pode ser uma fonte alternativa de matéria-prima para a produção de chapas aglomeradas.

    Resumo em Inglês:

    ABSTRACT This study was carried out to evaluate the potential of use of canafístula wood (Peltophorum dubium (Spreng.) Taub.) in manufacturing particleboard, bonded with tannin and urea-formaldehyde adhesives used in a ratio of 9% of the particles oven-dry weight. For each treatment, three boards were made with a nominal density of 0.63 g/cm3. The properties evaluated were the water absorption for two and 24 hours of immersion and the thickness swelling, the static bending (MOE and MOR), the screw withdrawal (RAP) and the internal bonding (LI), according to procedures prescribed by ASTM D-1037 (2000). The results were compared with standards established by ANSI A208.1 (1987) and DIN 68761 (1971). The urea-formaldehyde adhesive increased the water absorption of boards and the data results of thickness swelling tests were in accordance with the standards for both treatments. With the exception of the MOR, the resistance data results from the urea bonded boards were below of the minimum standard values; for tannin, all the properties were superior, with the exception of the RAP. According to the results of this study, canafístula wood, when combined with tannin-formaldehyde adhesive, can be an alternative source of raw material for particleboard production.
  • EFEITO DA ASSOCIAÇÃO DE BAGAÇO DE CANA, DO TIPO E DO TEOR DE ADESIVO NA PRODUÇÃO DE PAINÉIS AGLOMERADOS Artigo

    Mendes, Rafael Farinassi; Mendes, Lourival Marin; Guimarães Júnior, José Benedito; Santos, Rosimeire Cavalcante dos; César, Antonia Amanda da Silva

    Resumo em Português:

    RESUMO Este trabalho teve como objetivo avaliar o efeito da associação de bagaço de cana, tipo e teor de adesivo nas propriedades físico-mecânicas de painéis aglomerados com madeira de Pinus spp. O delineamento experimental se constituiu de um esquema fatorial 3x2x3, sendo três porcentagens de substituição de madeira de pinus por bagaço de cana - 25, 50 e 75%; dois tipos de adesivos - fenol-formaldeído (FF) e ureia-formaldeído (UF); e três teores de adesivo - 6, 9 e 12%. O ciclo de prensagem utilizado foi de pressão de 40 kgf/cm², temperatura de 160ºC para UF e de 180ºC para FF, e por um tempo de 8 minutos. Mediante os resultados pode-se concluir que: 1) Para a porcentagem de associação de bagaço de cana, nas propriedades em que foi observado efeito significativo, a tendência foi de diminuição da qualidade dos painéis à medida que se aumenta a quantidade de associação de bagaço de cana; 2) O adesivo UF se mostrou estatisticamente igual ou superior a FF em todas as propriedades avaliadas; 3) Os teores de adesivo apresentaram efeito significativo para todas as propriedades analisadas, sendo que, com exceção da propriedade ligação interna, em todas as outras propriedades o teor de 12% foi estatisticamente superior a 6%, e ainda igual ou superior a 9%.

    Resumo em Inglês:

    ABSTRACT This study aimed to evaluate the association effect of sugar cane bagasse, type and levels of adhesive in the physical-mechanical properties of particleboards with Pinus spp. wood. The experimental design consisted of a 3x2x3 factorial scheme, with three percentages of substitution pine wood by sugar cane bagasse - 25, 50 and 75%; two types of adhesives - phenol-formaldehyde (PF) and urea-formaldehyde (UF); and three levels of adhesive - 6, 9 and 12%. The cycle of pressing used was 40kgf/cm² pressure, temperature of 160ºC for UF and 180ºC for PF, and for a time of 8 minutes. From the results, it is concluded that: 1) For the percentage of sugar cane bagasse association, in the properties where significant effect was observed, the trend was decrease in panel quality as the amount of sugar cane bagasse increases; 2) The UF adhesive was statistically equal or greater than PF in all evaluated properties; 3) The levels of adhesive showed significant effects for all properties; Except for internal bond property, in all other properties the level of 12% was statistically superior to 6%, and equal or greater than 9%.
  • EFEITO DOS SÓLIDOS DISSOLVIDOS DA MADEIRA NA BRANQUEABILIDADE E NAS PROPRIEDADES FÍSICO-MECÂNICAS E ÓPTICAS DE POLPA KRAFT BRANQUEADA DE EUCALIPTO Artigo

    Longue Júnior, Dalton; Colodette, Jorge Luiz

    Resumo em Português:

    RESUMO Muitos estudos demonstram que o rendimento da polpação kraft pode ser melhorado pela readsorção de xilanas à polpa durante o cozimento, e o licor negro kraft contém fração significativa das xilanas da madeira, sendo uma importante fonte dessas macromoléculas. Porém, o efeito dessa técnica nas propriedades físico-mecânicas e ópticas de polpa branqueada de eucalipto, ainda não está bem esclarecido. Neste estudo foram produzidas polpas de eucalipto provenientes de cozimento kraft convencional, com diferentes adições de licor negro (0, 25, 50, 75 e 100 % v/v). Os cozimentos foram conduzidos até número kappa 17-18 e as polpas resultantes foram deslignificadas com oxigênio em condições fixas. O branqueamento foi realizado utilizando uma sequência DHT(EP)DP até alvura final 92 % ISO. Em seguida as polpas foram refinadas num moinho PFI a diferentes níveis de revoluções (0, 500, 1.500, 3.000 e 6.000) e realizados testes de resistência ao rasgo, ao arrebentamento e à passagem de ar, alongamento, opacidade, densidade, volume específico aparente, capilaridade Klemm e índice de retenção de água (WRV). A eficiência e o ganho de alvura da pré-deslignificação com oxigênio foram ligeiramente prejudicados pela adição de licor negro ao cozimento kraft. A adição de 50 % de licor negro aos cozimentos resultou em polpas de pior branqueabilidade, sendo a demanda de cloro ativo aumentada em 5,3 kg/t celulose seca para obtenção de alvura 92 % ISO. As propriedades físico-mecânicas e ópticas das polpas kraft branqueadas não foram influenciadas, significativamente, pelo uso de licor negro no cozimento.

    Resumo em Inglês:

    ABSTRACT Many studies have shown that the yield of kraft pulping can be improved by xylan reabsorption to the pulp during the cooking, and kraft black liquor contains significant fraction of xylan from wood, an important source of these macromolecules. However, the effect of this technique in the physical-mechanical and optical properties of bleached eucalyptus pulp is not very clear. This study produced pulp from eucalyptus kraft conventional cooking with different additions of black liquor (0, 25, 50, 75 and 100% v/v). The cooking was conducted to kappa number 17-18 and the resulting pulps were delignified with oxygen in fixed conditions. Bleaching was performed using a sequence DHT (EP) DP to end whiteness 92% ISO. Next pulps were refined in a PFI mill at different levels of revolutions (0, 500, 1,500, 3,000 and 6,000) and tests of tear resistance, bursting and the air flow, elongation, opacity, density, apparent specific volume, Klemm capillary and water retention value (WRV). The efficiency and brightness gain of the pre-delignification were slightly affected by the addition of black liquor in kraft pulping. The addition of 50% of black liquor to cooking resulted in a worse pulp ability for bleaching, and the chlorine demand increased by 5.3 kg/t pulp oven dry to obtain 92% ISO brightness. The physical-mechanical and optical properties bleached kraft pulps were not influenced significantly by the use of black liquor in cooking.
  • MÉTODOS PARA SUPERAÇÃO DA DORMÊNCIA DE SEMENTES DE QUIXABEIRA ( Sideroxylon obtusifolium (Roem. & Schult.) T.D.Penn.) Nota Técnica

    Rebouças, Ana Clara Moura Neves; Matos, Valderez Pontes; Ferreira, Rinaldo Luiz Caraciolo; Sena, Lúcia Helena de Moura; Sales, Anna Gorett de Figueiredo Almeida; Ferreira, Elane Grazielle Borba de Souza

    Resumo em Português:

    RESUMO Devido à ausência de informações sobre a metodologia para avaliação da qualidade fisiológica de sementes das espécies arbóreas medicinais, o presente trabalho teve por objetivo determinar o método mais eficiente para superação da dormência tegumentar em sementes de Sideroxylon obtusifolium (Roem. & Schult.) T.D.Penn.. Além das sementes intactas, sementes que não foram submetidas a nenhum tratamento, também foram utilizados os seguintes tratamentos pré-germinativos: escarificação química - as sementes foram imersas em ácido sulfúrico absoluto por 10, 20, 30, 40, 50 e 60 minutos; escarificação mecânica - as sementes foram friccionadas manualmente em lixa nº 50, do lado oposto à micrópila, sem ou com embebição por 24 ou 48 horas; imersão em água a 100ºC por 15 ou 30 segundos; imersão em água a 80ºC até o resfriamento. Os efeitos foram avaliados através de testes de germinação e vigor. Constatou-se que houve diferença significativa entre os tratamentos para todos os parâmetros avaliados (porcentagem e velocidade de germinação, comprimento e massa seca de parte aérea e raiz primária), e a causa mais evidente da dormência é a impermeabilidade do tegumento, a qual foi superada com maior eficiência pelo método de imersão em ácido sulfúrico por 30 minutos.

    Resumo em Inglês:

    ABSTRACT Due to absence of information about the methodology for the evaluation of the physiological quality of seeds of medicinal arboreal species seeds, the aim of the present work was to determine the most efficient method to overcome the seed coat dormancy in seeds of Sideroxylon obtusifolium (Roem.& Schult.) T.D.Penn. Besides the intact seeds, the ones which had not been submitted to any treatment, the following pre-germinating methods were used: chemical scarification: the seeds were immersed in pure sulfuric acid for 10, 20, 30, 40, 50 and 60 minutes at the environment temperature (27ºC ± 1ºC); mechanical scarification: the seeds were rubbed manually in sandpaper number 50, in the opposite side of micropyle, without and with soaking for 24 or 48 hours; thermal scarification: immersion in water at 100ºC for 15 or 30 seconds; immersion in water to 80ºC until cooling. The effects of treatments were evaluated through tests of germination and vigor. There were significant differences among the treatments for all the evaluated parameters (percentage and speed of germination, length and dry weight of shoot and root), and the most evident cause of dormancy was the coat impermeability, which efficiency was overcame by the immersion of seeds in pure sulfuric acid for 30 minutes.
  • RELAÇÕES FLORÍSTICAS E FITOSSOCIOLOGIA DE UMA FLORESTA OMBRÓFILA MISTA MONTANA SECUNDÁRIA EM LAGES, SANTA CATARINA Nota Técnica

    Silva, Ana Carolina da; Higuchi, Pedro; Aguiar, Manoela Drews de; Negrini, Marcelo; Fert Neto, João; Hess, André Felipe

    Resumo em Português:

    RESUMO O presente estudo teve como objetivos caracterizar a estrutura fitossociológica de um fragmento de floresta secundária em Lages, SC, contextualizar a composição florística do componente arbóreo do fragmento em relação a outros remanescentes da região do Planalto Sul-Catarinense e avaliar a influência de variáveis geográficas e climáticas sobre os padrões observados. O levantamento da composição florística e estrutural da vegetação arbórea, do fragmento estudado, foi conduzido em 25 parcelas de 400 m2, onde todos os indivíduos arbóreos com DAP (diâmetro medido à altura do peito) ≥ 5 cm foram medidos e identificados. Para o estudo das relações florísticas entre o fragmento estudado e outros remanescentes da região foi utilizada a Árvore de Regressão Multivariada, que utilizou matrizes florísticas de espécies arbóreas de presença e ausência e de variáveis geográficas e climáticas de cada remanescente. Foram encontradas 87 espécies, distribuídas em 36 famílias botânicas. As espécies de maior valor de importância no fragmento estudado foram Araucaria angustifolia (Bertol.) Kuntze e Podocarpus lambertii Klotzsch. A distribuição diamétrica da comunidade demonstrou padrão próximo ao J invertido e as populações tiveram padrões de distribuição diferenciados. Foram descriminados três agrupamentos florísticos associados à sazonalidade térmica e à temperatura média anual. O presente fragmento esteve agrupado a outras áreas de sazonalidade térmica maior ou igual a 3,053oC.

    Resumo em Inglês:

    ABSTRACT This study investigated the floristic composition and the tree community structure in a secondary Araucaria Forest fragment in the Southern Plateau Region of Santa Catarina state, Brazil, the floristic context of this fragment in relation to other areas of Araucaria Forest in the region and the influence of climatic and geographic variables on the clustering patterns observed. The phytosociological survey of tree vegetation was assessed through 25, 400 m2, plots, where all trees with DBH (diameter at breast height) ≥ 5 cm were measured and identified.The floristic relationship among remnants and the influence of climatic and geographic variables were analized through a Multivariate Regression Tree, using a presence-absence species matrix and a climatic-geographic variables matrix. In the study area, 87 species were found, distributed into 36 botanic families. The species with the highest importance value were Araucaria angustifolia (Bertol.) Kuntze and Podocarpus lambertii Klotzsch. While the distribution of individuals in diametric classes was similar to an inverted J shape for the community, the populations demonstrated different shapes of diametric distribution. In the region, three floristic clusters were discriminated, influenced mainly by temperature seasonality and annual mean temperature. The study site was grouped with together with other areas presenting temperature seasonality higher or equal to 3.053oC.
  • ESTABELECIMENTO E DESENVOLVIMENTO IN VITRO DE Eugenia involucrata DC.: INFLUÊNCIA DO TIPO DE EXPLANTE E DO MEIO NUTRITIVO Nota Técnica

    Golle, Diego Pascoal; Reiniger, Lia Rejane Silveira; Curti, Aline Ritter; Benítez León, Enrique Astério

    Resumo em Português:

    RESUMO Apresentando diversas características de interesse nos setores da silvicultura, fruticultura, meio ambiente e medicinal, Eugenia involucrata DC. (Myrtaceae) é uma espécie florestal nativa de vários Estados brasileiros. Considerada a dificuldade da propagação por sementes, que são recalcitrantes, perdendo rapidamente sua viabilidade após a colheita, este trabalho objetivou avaliar a influência do uso de segmentos apicais e nodais cultivados em diferentes meios nutritivos no estabelecimento e no desenvolvimento in vitro desta espécie. Segmentos apicais e nodais coletados em plantas de três anos de idade, mantidas em casa de vegetação, foram inoculados nos meios nutritivos MS, 1/2 MS e WPM. Em um primeiro momento, adicionaram-se aos meios de cultura 1 µM de ANA e 5 µM de TDZ e, após, os explantes foram transferidos para frascos contendo os respectivos meios nutritivos frescos, na ausência de reguladores de crescimento, mas com o acréscimo de 1 g L-1 de carvão ativado, sendo cultivados por 30 dias adicionais. Os meios 1/2 MS e WPM são adequados para o estabelecimento e o desenvolvimento in vitro a partir do cultivo de segmentos nodais, enquanto que, com segmentos apicais, é apropriado o meio 1/2 MS. O meio 1/2 MS possibilitou os melhores índices de enraizamento nos explantes, juntamente com o meio WPM. O estabelecimento e o enraizamento in vitro foram promovidos pelo cultivo de segmentos apicais e nodais de Eugenia involucrata DC. Os meios nutritivos 1/2 MS e WPM são apropriados para o cultivo in vitro de segmentos nodais de E. involucrata, recomendando-se o meio 1/2 MS pela economia e praticidade. Para segmentos apicais, o uso do meio de cultura 1/2 MS é mais adequado que o dos meios MS e WPM.

    Resumo em Inglês:

    ABSTRACT Eugenia involucrata DC. (Myrtaceae) is a native forest species to several Brazilian states which has several features of interest in the sectors of forestry, fruit faming, environment and medicine. Considering the difficulty of propagation by seeds, which are recalcitrant and lose viability rapidly after harvest, this study evaluated the influence of the use of apical and nodal segments cultured in different nutrient media on the in vitro establishment and development of this species. Apical and nodal segments collected from three- year- old plants kept in the greenhouse were inoculated in the nutrient media MS, 1/2 MS and WPM. First, 1 μM of NAA and 5 μM of TDZ were added to the culture media. After that, the explants were transferred to flasks containing the respective fresh nutrient media in absence of growth regulators, but with addition of 1 g L-1 activated charcoal, and then cultured for 30 additional days. Medium 1/2 MS is most suitable for the in vitro establishment and development of apical segments while media 1/2 MS and WPM are appropriate for nodal segments. Medium 1/2 MS enabled the best results of rooting in explants, along with WPM; the in vitro establishment and rooting were made possible by the use of apical and nodal segments of E. involucrata DC. Nutritional media 1/2 MS and WPM are most suitable for in vitro culture of nodal segments of Eugenia involucrata DC; however, medium 1/2 MS is recommended due to economical and practical features. For apical segments of this species, the use of culture medium 1/2 MS is more appropriate than media MS and WPM.
  • ESPECTRORRADIOMETRIA NA REGIÃO DO VISÍVEL E DO INFRAVERMELHO PRÓXIMO EM POVOAMENTO DE Eucalyptus grandis Hill ex Maiden Nota Técnica

    Brandelero, Catize; Berra, Elias Fernando; Backes, Kátia Simone; Pereira, Rudiney Soares; Brun, Eleandro Jose

    Resumo em Português:

    RESUMO Leituras de reflectância em folhas de árvores de bordadura e de interior de um povoamento florestal de Eucalyptus grandis, no município de São Pedro das Missões - RS, foram analisadas nas regiões do espectro eletromagnético visível e do infravermelho próximo, utilizando-se espectrorradiometria. A área foi dividida em duas partes: bordadura e centro do povoamento. Para a coleta de material, a copa das árvores foi dividida em três partes (superior, média e inferior), de forma a diferenciar as posições de coleta de folhas, em cada uma das áreas. Foram amostradas três árvores em cada área, totalizando seis árvores, sendo que para cada árvore foram coletadas 60 folhas isoladas, 20 em cada posição. As leituras de reflectância foram realizadas através do espectrorradiômetro FieldSpec(r)3 e os resultados finais foram segmentados nas bandas espectrais do visível e do infravermelho próximo. A análise estatística valeu-se do teste Tukey HSD, para comparação das médias da região do visível, que de acordo com a ANOVA apresentaram diferenças significativas. Conclui-se que as classes indicadas de coleta de folhas para análise espectrorradiométrica na região do visível são preferencialmente a 5 (árvore de centro, leitura na parte mediana) e a 3 (árvore de bordadura, leitura parte superior).

    Resumo em Inglês:

    ABSTRACT Reflectance readings in border and inner tree leaves in a Eucalyptus grandis stand, in São Pedro das Missões, Rio Grande do Sul state, were analyzed in the regions of the visible electromagnetic spectrum and the nearby infrared, by using spectrum radiometry. The area was divided in two parts: border and center stands. In order to collect the material, the crown was divided in three parts (superior, medium and inferior), so that it would be possible to differentiate the positions of leaf collections in each area. Three trees were sampled in each area, adding up to six trees, for each tree, 60 isolated leaves were collected, 20 in each position. The reflectance readings were carried out through FieldSpec(r)3 spectrum radiometer and the final results were segmented in the visible and nearby infrared spectral bands. The statistical analysis was made on the basis of several tests, among them Tukey HSD test, in order to compare the averages of the visible region, which, according to ANOVA, present significant differences. It is concluded that the collecting indicating class of leaves for the spectrum radiometric analysis in the visible region are preferably the 5 one (tree in the center, reading in the medium part) and #3 one (border tree, reading superior part).
Universidade Federal de Santa Maria Av. Roraima, 1.000, 97105-900 Santa Maria RS Brasil, Tel. : (55 55)3220-8444 r.37, Fax: (55 55)3220-8444 r.22 - Santa Maria - RS - Brazil
E-mail: cienciaflorestal@ufsm.br