SciELO - Scientific Electronic Library Online

SciELO - Scientific Electronic Library Online

Article References

TAVARES, Sérgio Souto Maior et al. Tensile properties of duplex UNS S32205 and lean duplex UNS S32304 steels and the influence of short duration 475 ºC aging. Mat. Res. [online]. In press. , pp.859-864.  Epub Sep 13, 2012. ISSN 1516-1439.

    1. Chandra K, Singhal R, Kain V and Raja VS. Low temperature embrittlement of duplex stainless steel: Correlation between mechanical and electrochemical behavior. Materials Science and Engineering. 2010;527:3904-3912. [ Links ]

    2. Sahu JK, Krupp U, Ghosh RN and Christ H-J. Effect of 475 C embrittlement on the mechanical properties of duplex stainless steel. Materials Science and Engineering: A. 2009;508:1-14. [ Links ]

    3. Weng KL, Chen HR and Yang JR. The low-temperature aging embrittlement in a 2205 duplex stainless steel. Materials Science and Engineering: A. 2004;379:119-132. [ Links ]

    4. Tavares SSM, Terra VF, Lima Neto P and Matos D. Corrosion resistance evaluation of the UNS S31803 duplex stainless steels aged at low temperatures (350 to 550 C) using DLEPR tests. Journal of Materials Science. 2005;40:4025-4028. [ Links ]

    5. Maeda N, Goto T, Kamimura T, Naito T, Kumano S and Nakao Y. Changes in electromagnetic properties during thermal aging of duplex stainless steel. International Journal of Pressure Vessels and Piping. 1997;71:7-12. [ Links ]

    6. Seetharaman V and Krishnan R. Influence of the martensitic transformation on the deformation behaviour of an AISI 316 stainless steel at low temperatures. Journal of Materials Science. 1981;16:523-530. [ Links ]

    7. Abreu HFG, Gomes da Silva MJ, Maia do Nascimento A and Freitas FNC. Stress induced martensite transformation texture in AISI 304 austenitic stainless steel. Materials Science and Technology. 2011;27(11):1627-1631. [ Links ]

    8. Tavares SSM, Maria Neto J, Silva MR, Vasconcelos IF and Abreu HFG. Magnetic properties and α' martensite quantification in an AISI 301LN stainless steel deformed by cold rolling. Materials Characterization. 2008;59:901-904. [ Links ]

    9. Reick W, Pohl M and Padilha AF. Determination of stacking fault energy of austenite in a duplex stainless steel. Steel Research. 1996;67(6):253-256. [ Links ]

    10. Marques F, Silva WM, Pardal JM, Tavares SSM and Scandian C. Influence of heat treatments on the micro-abrasion wear resistance of a superduplex stainless steel. Wear. 2011;271:1288-1294. [ Links ]

    11. American Society for Testing and Materials - ASTM. E-370-09: Standard Test Methods and Definitions for Mechanical Testing of Steel Products. ASTM; 2009. [ Links ]

    12. Dieter GE. Mechanical Metallurgy. Singapore: McGraw Hill; 1988. p. 287-288. [ Links ]

    13. Tavares SSM, Silva MR, Pardal JM, Abreu HFG and Gomes AM. Microstructural changes produced by plastic deformation in the UNS S31803 duplex stainless steel. Journal of Materials Processing Technology. 2006;180:318-322. [ Links ]