NANDI, Arup Kumar. Modelling and analysis of cutting force and surface roughness in milling operation using TSKtype fuzzy rules. J. Braz. Soc. Mech. Sci. & Eng. [online]. 2012, vol.34, n.1, pp. 4961. ISSN 16785878. http://dx.doi.org/10.1590/S167858782012000100007.


AbouElHossein, K.A., Kadirgama, K., Hamdi, M. and Benyounis, K.Y., 2007, "Prediction of cutting force in endmilling operation of modified AISI P20 tool steel", Journal of Materials Processing Technology, Vol. 182, No. 13, pp. 241247. [ Links ] Alauddin, M., E1 Baradie, M.A. and Hashmi, M.S.J., 1996, "Optimization of surface finish in end milling Inconel 718", Journal of Materials Processing Technology Vol. 56, pp. 5465. [ Links ] Alauddin, M., E1 Baradie, M.A. and Hashmi, M.S.J., 1995, "Computeraided analysis of a surfaceroughness model for end milling", Journal of Materials Processing Technology, Vol. 55, No. 2, pp. 123127. [ Links ] Armarego, E.J.A. and Brown, R.H., 1969, "The Machining of Metals", PrenticeHall, New Jersey. [ Links ] Armarego, E.J.A., 1994, "Machining performance prediction for modern manufacturing", Proceedings of the 7^{th} International Conference on Production and Precision Engineering and Fourth International Conference on High Technology (4th ICHT), Chiba, Japan, pp. 215220. [ Links ] Chang, C.C., 1992, "Mathematical modeling and analysis of the surfacetopography generated during end milling process", Master Thesis, University of Maryland. [ Links ] Chevrier, P., Tidu, A., Bolle, B., Cezard, P. and Tinnes, J.P., 2003, "Investigation of surface integrity in high speed end milling of a low alloyed steel", International Journal of Machine Tools and Manufacture, Vol. 43, No. 11, pp. 11351142. [ Links ] DeVor, R.E., Kline, W.A. and Zdeblick, W.J., 1980, "A mechanistic model for the force system in end milling with application to machining airframe structures", Proceedings of the Eighth North American Manufacturing Research Conference, Rolla, pp. 297303. [ Links ] Dewes R.C. and Aspinwall, D.K., 1997, "A review of ultra high speed milling of hardened steels", Journal of Materials Processing Technology, Vol. 69, No. 13, pp. 117. [ Links ] Fukuda, T., Hasegawa, Y., Shimojima, K. and Saito, F., 1995, "Reinforcement Learning Method for Generating Fuzzy Controller", Proceedings of the IEEE International Conference on Evolutionary Computation, pp. 273278. [ Links ] Ghani, J.A., Choudhury, I.A. and Hassan, H.H., 2004, "Application of Taguchi method in the optimization of end milling parameters", Journal of Materials Processing Technology, Vol. 145, No. 1, pp. 8492. [ Links ] Hwang, W.R and Thompson, W.E., 1994, "Design of fuzzy logic controllers using genetic algorithms". Proceedings of the Third IEEE International Conference on Fuzzy Systems (FUZZIEEE'94), Orlando, USA, pp. 13831388. [ Links ] Kang, I.S., Kim, J.S., Kim, J.H., Kang, M.C. and Seo, Y.W., 2007, "A mechanistic model of cutting force in the micro end milling process", Journal of Materials Processing Technology, Vol. 187188, pp. 250255. [ Links ] Kline, W.A., DeVor, R.E. and Shareef, I.A., 1982, "The prediction of surface accuracy in end milling", Transactions of ASME, Journal of Engineering for Industry, Vol. 104, pp. 272278. [ Links ] Koenigsberger, F. and Sabberwal, A.J.P., 1961, "An investigation of the cutting force pulsations during the milling process", International Journal of Machine Tool Design and Research, Vol. 1, No. 12, pp. 1533. [ Links ] Kovacic, M., Balic, J. and Brezocnik, M., 2004, "Evolutionary approach for cutting forces prediction in milling", Journal of Materials Processing Technology, Vol. 155156, pp. 16471652. [ Links ] Lee, H. U. and Cho, D. W., 2007, "Development of a reference cutting force model for rough milling feedrate scheduling using FEM analysis", International Journal of Machine Tools and Manufture, Vol. 47, No. 1, pp. 158167. [ Links ] Li, X.P., Nee, A.Y.C., Wong, Y.S. and Zheng, H.Q., 1999, "Theoretical modelling a simulation of milling forces", Journal of Materials Processing Technology, Vol. 8990, pp. 266272. [ Links ] Li, H.Z. and Li, X.P., 2002, "Milling force prediction using a dynamic shear length model", International Journal of Machine Tools and Manufacture, Vol. 42, No. 2, pp. 277286. [ Links ] Li, H.Z., Zeng, H. and Chen, X.Q., 2006, "An experimental study of tool wear and cutting force variation in the end milling of Inconel 718 with coated carbide inserts", Journal of Materials Processing Technology, Vol. 180, No. 13, pp. 296304. [ Links ] Montgomer, D.C., 2001, "Design, Analysis of Experiments", 5th ed., John Wiley & Sons, pp. 427500. [ Links ] Nandi, A.K., 2006, "TSKType FLC using a combined LR and GA: surface roughness prediction in ultraprecision turning", Journal of Materials Processing Technology, Vol. 178, No. 13, pp. 200210. [ Links ] Nandi, A.K. and Klawonn, F., 2004, "Detecting Ambiguity in RP using TSK models", Proceedings of the IEEE International conference on Fuzzy Systems (FUZZIEEE 2004), Budapest, Hungary, pp. 221226. [ Links ] Nauck, D., Klawonn, F. and Kruse, R., 1993, "Combining Neural Networks and Fuzzy Controllers". In E. P. Klement, Slany W. eds. Fuzzy Logic in Artificial Intelligence, Springer, Berlin. [ Links ] Nomura, H., Hayashi, I. and Wakami, N., 1992, "A learning method of fuzzy inference rules by descent method", Proceedings of IEEE International Conference on Fuzzy Systems, San Diego, CA, USA, pp. 203210. [ Links ] Omar, O.E.E.K., ElWardany, T., Ng, E. and Elbestawi, M.A., 2007, "An improved cutting force and surface topography prediction model in end milling", International Journal of Machine Tools & Manufacture, Vol. 47, No. 78, pp. 12631275. [ Links ] Sabberwal, A.J.P., 1960, "Chip section and cutting force during the end milling operation", Annals of the CIRP, Vol. 10, No. 3, pp. 197203. [ Links ] Sugeno, M. and Kang, G.T., 1988, "Structure identification of fuzzy model", Fuzzy Sets and Systems, Vol. 28, No. 1, pp. 1533. [ Links ] Sutherland, J.W. and DeVor, R.E., 1986, "Improved method for cutting force and surface error prediction in flexible end milling systems", Transactions of ASME, Journal of Engineering for Industry, Vol. 108, No. 4, pp. 269279. [ Links ] Takagi, T. and Sugeno, M., 1985, "Fuzzy identification of systems and its application to modeling and control", IEEE Transaction on Systems, Man and Cybernetics, Vol. 15, No. 1, pp. 116132. [ Links ] Tsai, Y.H., Chen, J.C. and Lou, S.J., 1999, "An inprocess surface recognition system based on neural networks in end milling cutting operations", International Journal of Machine Tools and Manufacture, Vol. 39, No. 4, pp. 583605. [ Links ] Vivancos, J., Luis, C.J., Costa, L. and Ort'ız, J.A., 2004, "Optimal machining parameters selection in high speed milling of hardened steels for injection moulds", Journal of Materials Processing Technology, Vol. 155156, pp. 15051512. [ Links ] Wang, L.X. and Mendel, J.M., 1992, "Generating Fuzzy Rules by Learning from Examples", IEEE Transactions on Systems, Man, and Cybernetics, Vol. 22, No. 6, pp. 14141427. [ Links ] Wang, S. M., Chiou, C.H. and Cheng, Y.M., 2004, "An improved dynamic cutting force model for endmilling process", Journal of Materials Processing Technology, Vol. 148, No. 3, pp. 317327. [ Links ] Yoon, M.C. and Kim, Y.G., 2004, Cutting force modeling of endmilling operation, Journal of Materials Processing Technology, Vol. 155156, pp. 13831389. [ Links ] Yun, W.S. and Cho, D.W., 2000, "An improved method for the determination of 3D cutting force coefficients and runout parameters in end milling", International Journal of Advanced Manufacturing Technology, Vol. 16, pp. 851858. [ Links ] Yun, W.S. and Cho, D.W., 2001, "Accurate 3D cutting force prediction using cutting condition independent coefficients in end milling", International Journal of Machine Tools and Manufacture, Vol. 41, No. 4, pp. 463478. [ Links ] Zadeh, L.A., 1965, "Fuzzy Sets", Information and Control, Vol. 8, pp. 338353. [ Links ] Zuperl, U., Cus, F. and Milfelner, M., 2005, "Fuzzy control strategy for an adaptive force control in endmilling", Journal of Materials Processing Technology, Vol. 164165, pp. 14721478. [ Links ] 