SciELO - Scientific Electronic Library Online

SciELO - Scientific Electronic Library Online

Article References

GAITONDE, V. N.  and  KARNIK, S. R.. Selection of optimal process parameters for minimizing burr size in drilling using Taguchi's quality loss function approach. J. Braz. Soc. Mech. Sci. & Eng. [online]. 2012, vol.34, n.3, pp. 238-245. ISSN 1678-5878.  http://dx.doi.org/10.1590/S1678-58782012000300003.

    Ames, A.E., Mattucci, N., Macdonald, S., Szonyi, G. and Hawkins, D.M., 1997, "Quality Loss Functions for Optimization across Multiple Response Surfaces", Journal of Quality Technology, Vol. 29, pp. 339-346. [ Links ]

    Dornfeld, D.A., Kim, J., Dechow, H., Hewson, J. and Chen, L.J., 1999, "Drilling Burr Formation in Titanium Alloy, Ti-6Al-4V", Annals of CIRP, Vol. 48, No.1, pp. 73-76. [ Links ]

    Gaitonde, V.N., Karnik, S.R., Achyutha, B.T. and Siddeswarappa, B., 2008, "Genetic Algorithm Based Burr Size Minimization in Drilling of AISI 316L Stainless Steel", Journal of Materials Processing Technology, Vol. 197, pp. 225-236. [ Links ]

    Gillespie, L.K., 1975, "The $2 Billion Deburring Bill", Manufacturing Engineering Management, Vol. 74, pp. 20-21. [ Links ]

    Gillespie, L.K., 1979, "Deburring Precision Miniature Parts", Precision Engineering, Vol. 1, No. 4, pp. 189-198. [ Links ]

    Guo, Y.B. and Dornfeld, D.A., 2000, "Finite Element Modeling of Drilling Burr Formation Process in Drilling 304 Stainless Steel", ASME Journal of Manufacturing Science and Engineering, Vol. 122, No. 4, pp. 612-619. [ Links ]

    Jeyapaul, R., Shahabudeen, P. and Krishnaiah, K., 2005, "Quality Management Research by Considering Multi-Response Problems in the Taguchi Method – A Review", International Journal of Advanced Manufacturing Technology, Vol. 26, pp.1331-1337. [ Links ]

    Kim, J., Min, S. and Dornfeld, D.A., 2001, "Optimization and Control of Drilling Burr Formation of AISI 304L and AISI 4118 Based on Drilling Burr Control Charts", International Journal of Machine Tools and Manufacture, Vol. 41, pp. 923-936. [ Links ]

    Ko, S.L., Chang, J.E. and Kalpakjian, S., 2003, "Development of Drill Geometry for Burr Minimization in Drilling", Annals of CIRP, Vol. 52, pp.45-48. [ Links ]

    Lin, R., 2002, "Cutting Behavior of a TiN-coated Carbide Drill with Curved Cutting Edges during the High Speed Machining of Stainless Steel", Journal of Materials Processing Technology, Vol. 127, pp. 8-16. [ Links ]

    Min, S., Dornfeld, D.A., Kim, J., Shyu, B., 2001a, "Finite Element Modeling of Burr Formation in Metal Cutting", Machining Science and Technology", Vol. 5, pp. 307-322. [ Links ]

    Min, S., Kim, J., Dornfeld, D.A., 2001b, "Development of a Drilling Burr Control Chart for Low Alloy Steel AISI 4118", Journal of Materials Processing Technology, Vol. 113, pp. 4-9. [ Links ]

    Min, S., Kim, J. and Dornfeld, D.A., 2001c; "Development of a Drilling Burr Control Chart for Stainless Steel", Transactions of NAMRI/SME, Vol. 28, pp. 317-322. [ Links ]

    Pande, S.S., Relekar, H.P., 1986, "Investigations on Reducing Burr Formation in Drilling", International Journal of Machine Tool Design Research, Vol. 26, No. 3, pp. 339-348. [ Links ]

    Phadke, M.S., 1989, "Quality Engineering Using Robust Design", Englewood Cliffs New Jersey, Prentice Hall. [ Links ]

    Ross, P.J., 1996, "Taguchi Techniques for Quality Engineering", McGraw-Hill, New York. [ Links ]

    Stein, J.M., 1997, "The Burrs from Drilling: An Introduction to Drilling Burr Technology", USA, Burr Technology Information Series TM. [ Links ]

    Stein, J.M. and Dornfeld, D.A., 1997, "Burr Formation in Drilling Miniature Holes", Annals of CIRP, Vol. 46, No. 1, pp. 63-66. [ Links ]