SciELO - Scientific Electronic Library Online

SciELO - Scientific Electronic Library Online

Article References

OZTURK, Sabri  and  ALTAN, Erhan. Slip-line metal cutting model with negative rake angle. J. Braz. Soc. Mech. Sci. & Eng. [online]. 2012, vol.34, n.3, pp. 246-252. ISSN 1678-5878.  http://dx.doi.org/10.1590/S1678-58782012000300004.

    Abdelmoneim, M.Es., Nasser, A.A., Abdel Mahboud, A.M., 1983, "A fundamental study of cutting employing orthogonal negative rake tools", Wear, Vol. 85, pp. 171-180. [ Links ]

    Abdelmoneim, M.Es., Scrutton, R.F., 1974, "Tool edge roudness and stable build-up formation in finish machining", Journal of Engineering for Industry, pp. 1258-1267. [ Links ]

    Abebe, M., 1981, "A slip-line solution for negative rake angle cutting", Manufacturing Engineering Transactions, Vol. 9, pp. 341-348. [ Links ]

    Albrecht, P., 1960, "New development in the theory of the metal-cutting process part 1: the ploughing process in metal cutting", Journal of Engineering for Industry, pp. 348-358. [ Links ]

    Dewhurst, P., Collins, I.F., 1973, "A matrix technique constructing slip-line field solutions to a class of plane strain plasticity problems", Int. J. Numer. Methods Eng., Vol. 7, pp. 357-378. [ Links ]

    Dewhurst, P., 1978, "On the non-uniqueness of the machining process", Proc. R. Soc. London Ser. Vol. 360, pp. 587-610. [ Links ]

    Dundur, S.T., Das, N.S., 2009, "Slip line field modeling of orthogonal machining for a worn tool with elastic effects and adhesion friction at the contact regions", Journal of Materials Processing Technology, Vol. 209, pp. 18-25. [ Links ]

    Fang, N., Dewhurst, P., 2005, "Slip-line modeling of built-up edge formation in machining", International Journal of Mechanical Sciences, Vol. 47, pp. 1079-1098. [ Links ]

    Fang, N., 2005, "Tool-chip friction in machining with a large negative rake angle tool" Wear, Vol. 258, pp. 890-897. [ Links ]

    Fang, N., Jawahir, I.S., 2002, "Analytic predictions and experimental validation of cutting force ratio, chip thickness and chip black-flow angle in restricted contact machining using the universal slip-line model", International Journal of Machine Tools & Manufacture, Vol. 42, pp. 681-694. [ Links ]

    Fang, N., 2002, "Machining with the tool-chip contact on the tool secondary rake face-part 1: a new slip-line model", International Journal of Mechanical Sciences, Vol. 44, pp. 2337-2354. [ Links ]

    Gnay, M., Aslan, G., Korkut, İ., Şeker, U., 2004, "Investigation of the effect of rake angle on main cutting force", International Journal of Machine Tools & Manufacture, Vol. 44, pp. 953-959. [ Links ]

    Hill, R., 1954, "On the limits set by plastic yielding to the intensity of singularities of stress", Journal of the Mechanics and Physics of Solids, Vol. 2, pp. 278-285. [ Links ]

    Jin, X., Altintas, Y., 2011, "Slip-line field model of micro-cutting process with round tool edge effect", Journal of Materials Processing Technology, Vol. 211, Issue 3, pp. 339-355. [ Links ]

    Kıta, Y., Hata, S., Ido, M., 1975, "Investigation on the mechanism of metal removal", Bull. Japan of Prec. Eng., Vol. 9, pp. 113-114. [ Links ]

    Kıta, Y., Ido, M., Kawasaki, N., 1982, "A study of metal flow ahead of tool face with large negative rake angle", Journal of Engineering for Industry, Vol. 104, pp. 319-325. [ Links ]

    Kıta, Y., Ido, M., Hata, S., 1978, "The mechanism of metal removal by an abrasive tool" Wear, Vol. 47, pp. 185-193. [ Links ]

    Kıta, Y., Ido, M., Tujı, Y., 1981, "The influence of the cutting speed on the mechanism of metal removal by an abrasive tool", Wear, Vol. 71, pp. 55-63. [ Links ]

    Komanduri, R., 1971, "Some aspects of machining with negative rake tools simulating grinding", Int. J. Mach. Tool Des. Res., Vol. 11, pp. 223-233. [ Links ]

    Kopalinsky, E.M., Oxley, P.L.B., 1984, "An investigation of feed and rake angle on the ratio of feed force to cutting force when machining with negative rake angle tools", CIRP Annals - Manufacturing Technology, Vol. 33, pp. 43-46. [ Links ]

    Lee, E.H., Shaffer, B.W., 1951, "The theory of plasticity applied to a problem of machining", Trans. ASME, Vol. 73, pp. 405-413. [ Links ]

    Long, Y., Huang, Y. 2010, "Combined effects of flank and crater wear on cutting force modeling in orthogonal machining, Part I: Model Development", Machining Science and Technology, Vol. 14(1), pp. 106-128. [ Links ]

    Makino, R., Usui, E., 1973, "An analysis of stress and strain distributions in the plastic region of slow speed, steady-state machining", Bull. Japan of Prec. Engg, Vol. 7, pp. 43-50. [ Links ]

    Ozturk, S., 2012, "Slip-Line modeling of machining and determine the influence of rake angle on the cutting force", Transactions of the Canadian Society for Mechanical Engineering, Vol. 36, No. 1, pp. 23-35. [ Links ]

    Palmer, W.B., Yeo, R.C., 1963, "Metal flow near the tool point during orthogonal cutting with a blunt tool", Proceedings of the 4th International MTDR Conference Oxford, pp. 61-71. [ Links ]

    Petryk, H., 1987, "Slip line field solutions for sliding contact", Prec Imeche, Vol. 2, pp. 987-994. [ Links ]