HALDENWANG, Rainer; KOTZE, Reinhardt and CHHABRA, Raj. Determining the viscous behavior of nonNewtonian fluids in a flume using a laminar sheet flow model and Ultrasonic Velocity Profiling (UVP) system. J. Braz. Soc. Mech. Sci. & Eng. [online]. 2012, vol.34, n.3, pp. 276284. ISSN 16785878. http://dx.doi.org/10.1590/S167858782012000300008.


Astarita, G., Marucci, G. and Palumba, G., 1964, "NonNewtonian flow along inclined plane surfaces", I & EC Fundamentals, Vol. 4 No. 3, pp. 333339. [ Links ] Bergström, J. and Vomhoff, H., 2004, "Velocity measurements in a cylindrical hydrocyclone operated with an opaque fibre suspension", Minerals Engineering, Vol. 17, No. 5, pp. 599604. [ Links ] Birkhofer, B.H., 2007, "Ultrasonic InLine Characterization of Suspensions", Laboratory of Food Process Engineering, Institute of Food Science and Nutrition, Swiss Federal Institute of Technology (ETH), Zurich, Switzerland. [ Links ] Bouillard, J., Alban, B., Jacques, P. and Xuereb, C., 2001, "Liquid flow velocity measurements in stirred tanks by ultrasound Doppler velocimetry", Chemical Engineering Science, Vol. 56, pp. 747754. [ Links ] Cantelli, A., 2009, "Uniform Flow of Modified Bingham Fluids in Narrow Cross Sections", Journal of Hydraulic Engineering, Vol. 135, No. 8, pp. 640650. [ Links ] Chhabra, R.P., 2006, "Bubbles, Drops and Particles in NonNewtonian Fluids", second edition, Boca Raton, CRC Press. [ Links ] Chhabra, R.P & Richardson, J.F., 2008, "NonNewtonian Flow and Applied Rheology", IInd edition, Oxford, ButterworthHeinemann. [ Links ] Coussot, P., 1994, "Steady laminar flow of concentrated mud suspensions in open channels", Journal of Hydraulic Research, Vol. 4, No. 32, pp. 535558. [ Links ] De Kee, D., Chhabra, R.P., Powley, M.B. and Roy, S., 1990, "Flow of viscoplastic fluids on an inclined plane: evaluation of yield stress", Chem. Eng. Comm., Vol. 96, pp. 229239. [ Links ] EinMozaffari, F., and Upreti, S.R., 2009, "Using ultrasonic Doppler velocimetry and CFD modeling to investigate the mixing of nonNewtonian fluids possessing yield stress", Chemical Engineering Research and Design, Vol. 87, pp. 515523. [ Links ] Fernandez, L. Gonzáles, A and Fuentes, R., 2010, "Flow of highly concentrated, extended particle size distribution slurries in open channels in laminar, transition and turbulent flow", Hydrotransport 18: 18th International Conference on the Hydraulic Transport of Solids in Pipes, Rio de Janeiro, Brazil, pp. 167182. [ Links ] Franca, M.J. and Lemmin, U., 2006, "Eliminating velocity aliasing in acoustic Doppler velocity profiler data", Measurements in Science and Technology, Vol. 17, pp. 313322. [ Links ] Fuentes, R., 2004, "Slurry flumes in Chile", (Keynote Address). Hydrotransport 16: 16th International Conference on the Hydraulic Transport of Solids in Pipes, Santiago, Chile. [ Links ] Haeri, S. and Hashemaabadi, S.H., 2009, "Experimental study of gravitydriven film flow of nonNewtonian fluids", Chem. Eng. Comm., Vol. 196, pp. 519529. [ Links ] Haldenwang, R., Slatter, P.T. and Chhabra, R.P., 2002,"Laminar and transitional flow in open channels for nonNewtonian fluids", Hydrotransport 15: 15th International Conference on the Hydraulic Transport of Solids in Pipes, Banff, Canada, pp. 755768. [ Links ] Haldenwang, R., 2003, "Flow of nonNewtonian fluids in open channels", Unpublished D.Tech thesis, Cape Technikon, Cape Town, South Africa. [ Links ] Haldenwang, R. and Slatter, P.T., 2006, "Experimental procedure and database for nonNewtonian open channel flow", Journal of Hydraulic Research, Vol. 44, No. 2, pp. 283287. [ Links ] Haldenwang, R., Slatter, P.T. and Chhabra, R.P., 2010, "An experimental study of nonNewtonian fluid flow in rectangular flumes in laminar, transition and turbulent flow regimes", Journal of the South African Institution of Civil Engineering, Vol. 52, No. 1, pp. 1119. [ Links ] Huang, X. and Garcia, M.H., 1998, "A HerschelBulkley model for mud flow down a slope", Journal of Fluid Mechanics, Vol. 374, pp. 30533. [ Links ] Kotzé, R., Haldenwang, R. and Slatter, P.T., 2008, "Rheological characterisation of highly concentrated mineral suspensions using an ultrasonic velocity profiling with combined pressure difference method", Applied Rheology, Vol. 18, pp. 6211462124. [ Links ] Kotzé, R., Wiklund, J., Haldenwang, R. and Fester, V., 2011, "Measurement and analysis of flow behaviour in complex geometries using the Ultrasonic Velocity Profiling (UVP) technique", Flow Measurement and Instrumentation,Vol. 22, pp. 110119. [ Links ] Kozicki, W. and Tiu, C., 1967, "NonNewtonian flow through open channels", Canadian Journal of Chemical Engineering, Vol. 45, pp. 127134. [ Links ] Kozicki, W. and Tiu, C., 1986, "Parametric modelling of flow geometries in nonNewtonian flows", In: Encyclopedia of Fluid Mechanics, Vol. 7, pp. 199252. [ Links ] Kuttruff, H., 1991, "Ultrasonics: Fundamentals and Applications", London and New York, Elsevier Applied Science. [ Links ] Laba, D., 1993, "Rheological Properties of Cosmetics and Toiletries", Marcel Dekker, Inc. New York. [ Links ] MetFlow SA., 2002, "UVP Monitor – Model UVPDUO User's Guide. Software version 3", MetFlow SA, Lausanne, Switzerland. [ Links ] Müller, M., Brunn, P.O. and Wunderlich, T., 1997, "New Rheometric Technique: the GradientUltrasound Pulse Doppler Method", Applied Rheology, Vol. 7, pp. 204210. [ Links ] Ouriev, B., 2000, "Ultrasound Doppler Based InLine Rheometry of Highly Concentrated Suspensions", ETH dissertation No. 13523, ISBN 3905609118, Zurich, Switzerland. [ Links ] Ouriev, B. and Windhab, E., 2003, "Novel ultrasound based time averaged flow mapping method for die entry visualization in flow of highly concentrated shearthinning and shearthickening suspensions", Measurements in Science and Technology, Vol. 14, pp. 140147. [ Links ] Sad Chemloul, N., Chaib, K. and Mostefa, K., 2009, "Simultaneous Measurements of the Solid Particles Velocity and Concentration Profiles in Two Phase Flow by Pulsed Ultrasonic Doppler Velocimetry", Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol. XXXl, No. 4, pp. 333343. [ Links ] Steger, R., 1994, "OptischUnd Akustische Metoden in Der Rheometrie", Erlangen: University of Erlangen, pp. 1100. [ Links ] Takeda, Y., 1986, "Velocity Profile Measurement by Ultrasound Doppler Shift Method", Int. J. Heat Fluid Flow, Vol. 7, No. 4, pp. 313318. [ Links ] Takeda, Y., 1995, "Velocity Profile Measurement by Ultrasonic Doppler Method", Experimental Thermal and Fluid Science, Vol. 10, pp. 444453. [ Links ] Takeda, Y., 1999, "Ultrasonic Doppler Method for Velocity Profile Measurement in Fluid Dynamics and Fluid Engineering", Experiments in Fluids, Vol. 26, pp. 177178. [ Links ] Takeda, Y. and Kikura, H., 2002, "Flow mapping of the mercury flow", Experiments in Fluids, Vol. 32, pp. 161169. [ Links ] Wiklund, J., 2007, "Ultrasound Doppler Based InLine Rheometry: Development, Validation and Application", SIK – The Swedish Institute for Food and Biotechnology, Lund University, Sweden, ISBN 9789162870256. [ Links ] Wiklund, J., Shahram, I. and Stading, M., 2007, "Methodology for inline rheology by ultrasound Doppler velocity profiling and pressure difference techniques", Chemical Engineering Science, Vol. 62, pp. 41594500. [ Links ] Wilson, S.D.R and Taylor, S.J., 1996, "The channel entry problem for a yield stress fluid", J. NonNewtonian Fluid Mechanics, Vol. l65, pp. 165176. [ Links ] 