Resumen Objetivo: realizar una revisión sistemática de los estudios observacionales que analizan la asociación entre la ingesta de alimentos ultraprocesados (UPF) y el riesgo de depresión. Material y métodos: la búsqueda se adhirió a las directrices Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA); se realizó una búsqueda de estudios observacionales publicados hasta junio de 2020 en las bases de datos PubMed, Embase, Cochrane Library y Web of Science, seguida de búsquedas manuales adicionales. Ocho revisores, que trabajaron de forma independiente en equipos de dos, seleccionaron los estudios para su elegibilidad, extrajeron los datos y evaluaron el riesgo de sesgo. Los desacuerdos se resolvieron a través de la discusión o, si era necesario, a través de la adjudicación de un tercero. Se evaluaron los estudios transversales mediante la lista de comprobación metodológica de la Agency for Healthcare Research and Quality (AHRQ) y los estudios de cohortes y de casos y controles mediante la escala Newcastle-Ottawa (NOS) para la calidad. Se utilizó un formato tabular para resumir los artículos. Resultados: finalmente se seleccionaron 28 estudios que evaluaban la ingesta de UPF y el riesgo de depresión, 21 de los cuales tenían un diseño transversal, 6 un diseño de cohortes y 1 un diseño de casos y controles. De ellos, 4 estudios de cohortes y 17 estudios transversales encontraron que el consumo de UPF se asociaba positivamente con la depresión o los síntomas depresivos. Conclusiones: nuestra revisión demostró que la mayoría de los estudios incluidos en la revisión sistemática mostraron que el consumo de UPF está asociado con el riesgo de depresión. Los estudios futuros deberían considerar el uso de evaluaciones validadas del consumo de alimentos y métodos estandarizados de evaluación de la depresión para promover la comparabilidad entre los estudios.

Abstract Objective: to conduct a systematic review of the observational studies analyzing the association between ultra-processed food (UPF) intake and the risk of depression. Material and methods: the search adhered to the guidelines of Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA); a search for observational studies published until June 2020 was performed in PubMed, Embase, Cochrane Library, and Web of Science databases, followed by additional manual searches. Eight reviewers, working independently in teams of two, screened studies for eligibility, extracted data, and assessed risk of bias. We resolved disagreements through discussion or, if necessary, through adjudication by a third (LH). And the study assessed cross-sectional studies using the Agency for Healthcare Research and Quality (AHRQ) methodological checklist and cohort and case-control studies using the Newcastle-Ottawa Scale (NOS) for quality. We used a tabular format to summarize the articles. Results: twenty-eight studies evaluating UPF intake and risk of depression were finally selected, 21 of which had a cross-sectional design, 6 studies had a cohort design, and 1 had a case-control design. Of these, 4 cohort studies and 17 cross-sectional studies found that consumption of UPF were positively associated with depression or depressive symptoms. Conclusions: our review demonstrated that most studies included in the systematic review showed that UPF consumption is associated with the risk of depression. Future studies should consider the use of validated food intake assessments and standardized depression assessment methods to promote comparability between studies.

Abstract A new MEFP warhead with seven arc-cone liners which can form 7, 13 or 19 penetrators at different standoffs is designed. Dispersion patterns and penetration properties of MEFP are performed on five #45 steel targets of dimension 160cm x 160cm x 1.5cm at various standoffs (45cm, 60cm, 80cm, 120cm, 170cm). It reaches the conclusion that every surrounding liner is broken into three penetrators during the formation process of MEFP and a group of aimable penetrators consisting a central projectile surrounded by 18 penetrators is finally formed. Maximum divergence angle of surrounding penetrator is 9.8° and the damage area reaches 0.37m2 at 1.7m. A nonlinear surface fitting about perforations information on the targets at different standoffs provides a method of predicting the dispersion patterns of MEFP. Once initiated, damage probability for defeating light armor of MEFP warhead with seven arc-cone liners is significantly improved and the results provide important reference to the design and optimization of MEFP warhead in engineering.

Abstract Three-dimensional numerical simulations and experiments were performed to examine the formation and spatial dispersion patterns of integral multiple explosively formed penetrators (MEFP) warhead with seven hemispherical liners. Numerical results had successfully described the formation process and distribution pattern of MEFP. A group of penetrators consisting of a central penetrator surrounded by 6 penetrators is formed during the formation process of MEFP and moves in the direction of aiming position. The maximum divergence angle of the surrounding penetrator group was 7.8°, and the damage area could reach 0.16 m2 at 1.2 m. The laws of perforation dispersion patterns of MEFP were also obtained through a nonlinear fitting of the perforation information on the target at different standoffs. The terminal effects of the MEFP warhead were performed on three #45 steel targets with a dimension of 160cm ( 160cm ( 1.5cm at various standoffs (60, 80, and 120 cm). The simulation results were validated through penetration experiments at different standoffs. It has shown excellent agreement between simulation and experiment results.

Abstract The dynamic response and microstructure evolution of oxygen-free high-conductivity copper in a shaped charge liner are investigated through microstructural examination of a soft-recovery EFP. Adiabatic shear bands and voids which is the failure original of copper EFP can be observed in the rear part of the projectile. Numerical simulation results illustrate that the highest plastic strain reaches about 2.9 which can fully accommodate the grains deformation of copper EFP during the formation process at strain rates of the order of 104s−1. Theoretical calculation results indicate that the highest temperature increase of EFP caused by shock wave and plastic deformation can reach 747K, which is 0.55T m (where T m is the melting temperature of copper). The main body of the EFP undergoes completely dynamic recrystallisation, and the average size of the refined grains significantly decreases to approximately 10µm. A slight increase in grain size occurs mainly away from the center and extends towards the head and rear sections of the EFP. During the DRX process, the dislocation movement is believed to be the controlling mechanism significantly refining the microstructure.

An account is given of some principal observations made from a series of experiments in which metal cylindrical shells were subjected to lateral explosion impact by different TNT charge mass and stand-off distance. These cylindrical shells were filled with water in order to identify the main effects produced by the fluid-structure interaction. In comparison, the explosion impact experiments of the empty cylindrical shells were also carried out. The effects of TNT charge mass, stand-off distance, cylindrical shell wall thickness and filled fluid (water) on perforation and deformation of metal cylindrical shells were discussed, which indicated that water increased the wall strength of the cylindrical shells under explosion impact loading, and the buckling deformation and perforation of the cylindrical shell was significantly influenced by the presence of the water; blast-resistant property of the tube under explosive impact loading of 200g TNT charge was much excellent; deformation and damage of empty cylindrical shell were more sensitive to stand-off distance changed. ALE finite element method was employed to simulate the deformations and damages of empty and water-filled cylindrical shells under explosion impact loading. The experimental and computational results are in agreement, showing the validity of the computational scheme in complex fluid-structure interaction problems involving metal materials subjected to explosion impact. The results show that internal pressure of water will increase when subjecting to impact loading, the anti-blast ability of tube structure is significantly enhanced.

In order to obtain adequate information for the treatment of methicillin resistant Staphylococcus aureus (MRSA) infections, it is crucial to identify trends in epidemiological and antimicrobial resistance patterns of local S. aureus strains. Community and hospital acquired S. aureus isolates (n = 202) were characterized using staphylococcal cassette chromosome mec (SCCmec) typing, pulse field gel electrophoresis (PFGE) analysis, spa typing and minimal inhibitory concentration (MIC) determination. The prevalence of the Panton-Valentine leukocidine (pvl) and several antibiotic resistance genes among the isolates were also detected by PCR. All of the S. aureus isolates were susceptible to vancomycin, daptomycin and linezolid. Three hospital isolates were resistant to teicoplanin while 14 showed intermediate resistance to teicoplanin. The resistance patterns of community-acquired MRSA (CA-MRSA) isolates to other antimicrobials were similar to those of hospital-acquired MRSA (HA-MRSA) isolates except for clindamycin and gentamicin. There was excellent correlation between phenotypes and genotypes in the determination of S. aureus resistance to erythromycin, gentamicin, and tetracycline. The SCCmec type II and SCCmec type IV were the predominant types detected in hospital and community isolates, respectively. The most frequently encountered spa types were t002 and t030 both in HA-and CA-MRSA isolates. Pulsotype A was the most predominant pulsotype identified among the isolates tested, followed by pulsotype B. Seventy-two hospital isolates (19 HA-MRSA and 53 HA-MSSA) and 10 CA-MRSA were positive for the pvl gene. This study shows that the combination of susceptibility testing and various molecular methods has provided useful information on the antibiotic resistance and molecular diversity of S. aureus in a specific region of China. The high proportion of pvl positive MSSA and MRSA isolates observed in this study indicates that adequate measures are needed to curtail the spread of those MRSA and MSSA clones prevailing both in hospital and the community.

To isolate differentially expressed peanut genes responsive to chilling, a suppression subtractive hybridization (SSH) cDNA library was constructed for a chilling tolerant peanut cultivar A4 with mRNAs extracted from the seeds imbibed at 2ºC and 15ºC, respectively, for 24 hrs. A total of 466 cDNA clones were sequenced, from which 193 unique transcripts (73 contigs and 120 singlets) were assembled. Of these unique transcripts, 132 (68.4%) were significantly similar to the sequences in GenBank non-redundant (nr) protein database, which belonged to diverse functional categories including metabolism, signal transduction, stress response, cell defense and transcriptional regulation. The remaining 61 (31.6%) showed no similarity to either hypothetical or known proteins. Six differentially expressed transcripts were further confirmed with real-time quantitative PCR (RT-qPCR).