ABSTRACT
The study compared through the four points bending test, the strength of bone segments autoclaved and devitalized in liquid nitrogen radius segments. 40 radius were used, collected and divided into 4 groups, as follows: Autoclave Group (GA), Control Autoclave Group (GCA), Nitrogen Group (NG) and Control Nitrogen Group (GCN). Bone segments from groups GCA and GCN were contralateral to GA and NG. The segments were autoclaved at 121ºC and 2 atm for 20 minutes. Nitrogen devitalization of the bone segments was obtained by 20 minutes immersion, followed by thawing at room temperature and 15 minutes immersion in 0.9% NaCL solution. After biomechanical tests the variables compared were maximum strength, stiffness, maximum hight trough the transverse section of the bone segment, centers of mass dislocation in relation to x axe, arrow, stress-tension, stress-compression and maximum stress. No statistically significant differences between the GN and GCN groups were found. Statistically significant differences were found between GA and GCA groups only in the comparison of the maximum force variable. The analysis of variable stress-tension, stress-compression and maximum stress showed statistically significant differences between the GA and GN groups, with higher values for the GA group. Comparison of the deltas (GN least GCN and GA least GCA) where no statistical differences were observed was also performed.
Keywords:
four points bending test; osteosarcoma; limb-sparing surgery; orthopaedic
