Metal Complexes versus Organocatalysts in Asymmetric 1 , 3-Dipolar Cycloadditions

Neste review apresentamos uma comparacao entre reacoes de cicloadicao 1,3-dipolar catalizadas por acido de Lewis com as organo catalizadas, com enfase na sintese enantiosseletiva de sistemas hetero ou carbociclicos de cinco membros. Essas reacoes exibem caracteristicas interessantes, mas a mais importante e a formacao de ate quatro centro estereogenicos em apenas uma etapa de reacao. In this review, a comparison between the Lewis acid catalysed and organocatalysed 1,3-dipolar cycloaddition is presented with special focus on the enantioselective synthesis of five-membered hetero- or carbocyclic systems, is described. These reactions exhibit very interesting features, but the most important one is the generation of up to four stereogenic centres in only one reaction step.


Introduction
The synthesis of chiral compounds is an important and challenging area of contemporary synthetic organic chemistry.When the generation of a stereogenic centre involves a carbon-carbon bond formation the transformation becomes fundamental to organic chemistry for the construction of the skeletal framework of simple or complex organic molecules. 1ycloadditions 2 are one of the best known and most widely used methods for generating carbon-carbon and carbon-heteroatom bonds with extremely high stereocontrol.Particularly, 1,3-dipolar cycloaddition (1,3-DC) is a classic reaction of a 1,3-dipole I with a dipolarophile II, such as alkenes, alkynes, and molecules possessing related heteroatom functional groups like carbonyl compounds and nitriles (Scheme 1). 3 In general, yields of five membered heterocycles III are high with a few and easily removable impurities.This reaction is very versatile, allowing the presence of many functional groups in both components.The available precursors of dipole I can be, basically, divided in two groups: the allyl anion-type Ia, such as nitrones, azomethine ylides, azomethine imines, carbonyl ylides and carbonyl imines, and the linear propargyl/allenyl anion-type Ib, such as nitrile oxides, nitrile imines, nitrile ylides, diazoalkanes and azides (Figure 1).
From the mechanistic point of view, these [2s+4s] additions are stereoconservative (suprafacial) and stereospecific, and the six π-electrons participate in a concerted (usually in thermally induced 1,3-DCs) or nonconcerted reaction pathway (habitually when a catalyst is employed) controlled by the HOMO-LUMO interaction rules. 4The results of this elevated stereocontrol are the Figures 1 and 2 show the most employed 1,3-dipoles, and the most significant contributions appeared in the literature during the last three years.1,3-Dipoles such as azomethine ylides, nitrones, diazoalkanes, carbonyl ylides, and nitrile oxides undergo both, metal-catalysed or organocatalysed enantioselective 1,3-DCs.On the other hand, 1,3-dipoles as phosphonium-inner salts can be exclusively generated by reaction of an organocatalyst (chiral phosphane) with alkyl allenoates (Figure 1).

Azomethine Ylides
The 1,3-DC using azomethine ylides is only productive when electron-deficient alkenes are employed.Azomethine ylides are 1,3-dipoles very frequently generated in situ by a thermal 1,2-prototropy shift in iminoesters 1, or by a base-assisted formation of a metallo-dipole. 3,5Although many other methods are known, the metallo-dipole route is the most employed due to its simplicity and the mildness of the required reaction conditions.According to the stereochemical point of view, metallo-dipoles 3 are crucial species because their geometry is perfectly controlled, so allowing the attainment of high diastereoselectivity of 1,5-cis-adducts.As it was outlined before, the endo:exo diastereoselections achieved in the preparation of proline derivatives 4 6 (Scheme 2), are clearly dependant on the metal employed as cocatalyst.For the particular case of electron deficient alkenes [R 1 and/or R 2 = electron-withdrawing group (EWG)], the frontier molecular orbital interactions involved can also be referred to as either exo-or endo-, where the endo-transition state is stabilised by small electronic interactions [that means that the EWG is oriented to the 1,3-dipole orbitals] or via an exo-transition state lacking such stabilisation (on this occasion the EWG is oriented far away from the 1,3-dipole).All these features are a solid support for developing catalytic enantioselective processes 3,5 generating unambiguously the absolute configuration of up to four stereogenic centres of pyrrolidines 4.
The asymmetric 1,3-DC of azomethine ylides and alkenes was pioneered by Grigg and co-workers 7 in 1991 using stoichiometric amounts of chiral bases or chiral metal complexes.However, it was just in 2002 when the first substoichiometric catalytic (3 mol%) enantioselective transformation was successfully reported by Zhang and co-workers 8 using a chiral diphosphane/silver(I) complex.At that time, this cycloaddition became a fascinating transformation and many contributions appeared with outstanding results. 5Chiral metal complexes, chiral bases, and chiral organocatalysts have all given excellent results, in terms of diastereo-and enantioselectivities, and wider general scope when chiral metallodipoles were generated    as intermediates.Based on the previous results obtained with silver(I) 9 and copper(I), 10 several complexes afforded catalytically the most efficient and attractive processes.The metal catalysed reaction depicted in Scheme 3 can be efficiently promoted by all the reported chiral metal complexes.For example, chiral silver complexes (Figure 3) catalysed diastereoselectively the 1,3-DC affording endocycloadducts 6 in very good yields under different reaction conditions.In all cases, the silver catalysts were formed by direct mixing of the chiral ligand and the corresponding silver(I) salt.
Concerning the most useful dipolarophile, the complex formed by (S,R p )-8a and AgOAc catalysed the reaction of methyl arylideneglycinates 5 (R 1 = H, R 2 = Me) with N-phenylmaleimide (NPM), in the absence of a base in diethyl ether at 0 ºC.The major product ent-endo-6 was selectively obtained, after 2-4 h, in excellent chemical yields (95-98%) and very good enantioselectivities (86-93% ee). 11A very small modification in the substituent of the arylic fragment of the thioether group in (S,R p )-8a, to give ligand (S,R p )-8b, was enough to accomplish, in identical chemical yields, good enantioselectivities of the corresponding ent-endo-compounds 6, when methyl maleate was allowed to react with iminoesters 5 (R 1 = H, R 2 = Me).In this last example, the temperature required was -25 ºC and the reaction was completed in 3 h. 11he same group further demonstrated how simple hydrogen bonding is enough to invert the enantioselection of the process.The employed ligands were slightly different chiral ferrocenes (S,R P )-8c and 8d, which were combined with AgOAc.In the reaction of the 1,3-dipole precursor 5 with dimethyl maleate, the proposed variation of the transition states TS-14 and TS-15, supported as well by a computational study, is shown in Scheme 4. The carbonyl groups of the dipolarophile can be coordinated by the Ag cation of the (S,R P )-8d-AgOAc complex and may form two hydrogen bonding interactions with the NH 2 group (TS-15).However, the dimethylamino group of the complex (S,R P )-8c-AgOAc cannot form these hydrogen bondings and the methyl groups would cause steric repulsion in TS-14.The two different approaches proposed could explain the opposite facial enantiodiscrimination observed experimentally.Thus, when the p-chlorobenzaldehyde imine 5 was allowed to react with dimethyl maleate it was deduced that the absence of the hydrogen bondings in TS-14 [(S,R P )-8c-AgOAc complex] would give the pyrrolidine ent-endo-6 (92% ee and > 98:2 endo:exo ratio, Scheme 4), whilst the TS-15 [(S,R P )-8d-AgOAc complex] would generate the corresponding adduct endo-6 ( _ 92% ee and > 98:2 endo:exo ratio, Scheme 4). 12he first example of the enantioselective 1,3-DC of amino acid derived azomethine ylides and maleimides by using a very stable and recyclable chiral (R)-or (S)-Binap 9-AgClO 4 complexes (5 mol%), has been described. 13he reactions were performed at room temperature, in toluene, in good yields, with high endo-diastereoand enantioselectivity, the catalytic chiral complex being recovered by simple filtration.In this reaction a substoichiometric amount of triethylamine (5 mol%) was required.Although the (R a )-and (S a )-Binap 9-AgClO 4 complexes (formed by mixing equimolar amounts of both chiral ligands and AgClO 4 ) were very insoluble in toluene, they efficiently catalysed the 1,3-DCR of azomethine ylides derived from 5 (R 1 = H, R 2 = Me) and N-methylmaleimide (NMM), at room temperature in 17 h, to yield endoadducts 6 (from 95:5 to > 98:2 endo:exo ratio, and from 80 to > 99% ee).The same catalyst (S a )-Binap 9-AgClO 4 (89-92% recovery yield) was able to catalyse efficiently five batches of new reactions without significant loss of enantioselectivity.In addition, dipoles derived from alanine (R 2 = Me), phenylalanine (R 2 = Bn), or leucine (R 2 = i Bu) methyl esters, were also essayed obtaining the endo-pyrrolidines 6 (> 98:2 endo:exo ratio in all cases) in good yields (56-81%) but lower enantioselections (from 72 to 98% ee) (Scheme 3).Moreover, these complexes (R a )-(S a )-9-AgClO 4 were very stable to light exposure, and their isolation, storage and manipulation did not require any especial care or glove box conditions.Once more, this type of cycloaddition demonstrated its sensitivity to the electronic nature and the bulkiness of the substituents attached to the a-position of the imino ester 5. 13 Chiral phosphoramidites 10 and 11 were tested as chiral ligands for silver(I) cation in the reaction shown in Scheme 3. 14 The formation of these first monodentate chiral ligand/AgClO 4 complexes afforded not so stable metallic aggregates such as it was reported in the case of (R)-or (S)-Binap 9-AgClO 4 complexes. 13However, the 1,3-DC of iminoesters 5 performed with (S a ,R,R)-11-AgClO 4 achieved one of the wider scope transformations reported to date.In all cases, the (S a ,R,R)-11-AgClO 4 complex afforded catalytically products with the stereochemistry corresponding to cycloadducts endo-6 (Scheme 3), in more than 98:2 ratio (according to 1 H NMR spectroscopy). 14ethyl arylideneiminoglycinates 5 (R 1 = H, R 2 = Me) reacted in toluene at −20 ºC, and in the presence of 5 mol% of Et 3 N as base, with the following dipolarophiles: tertbutyl acrylate (67-83% yield and up to 99% ee), NMM (at rt, 80% yield and > 99% ee), dialkyl fumarates (79-81% yield and 82% ee), chalcone and cyclopenten-2-one (72-82% yield and 82% ee and 94% ee, respectively).1,3-Dipoles derived from a-substituted a-amino acids such as alanine, leucine and phenylalanine afforded very high yields and good to excellent enantioselections, especially when tert-butyl acrylate (70-78% yield and up to 98% ee) or NMM (71-80% yield and up to 90% ee) were employed as dipolarophiles in toluene at -20 ºC for 48 h.
In both (S a )-Binap 9-AgClO 4 13 and (S a ,R,R) 11-AgClO 4   14   catalysed processes it was demonstrated that, as expected, the TS responsible for the enantiodiscrimination was quite asynchronous, detecting appreciable clashes between the dipole-containing coordination sphere and the dipolarophile.The more sophisticated phosphoramidite 12 was put together with AgOAc and the resulting catalytic mixture screened in the 1,3-DC reaction of methyl arylideneiminoglycinates 5 with dimethyl maleate as dipolarophile in the presence of Et 3 N (10 mol%) in Et 2 O as solvent at -25 ºC for 15 h.This complex induced the stereochemistry corresponding to the adduct ent-endo-6 (Scheme 3), with very high endo-diastereoselectivity (> 99:1), excellent yield (93-98%) and very high enantioselectivities (up to 99% ee).The main drawback of this process is that neither NPM, nor tert-butyl acrylate afforded high enantioselections.However, when dimethyl fumarate was used as dipolarophile, the ent-endo-cycloadduct 6 was isolated in quantitative yield and 84% ee. 15 Recently, the 1,3-DC of iminoesters 5 (R 1 = H, R 2 = Me) with maleimides has been performed using the chiral biaryl ligand (S)-13-AgOAc (3 mol%) as catalyst. 16he reaction took place in 3-6 h at room temperature, in DCM, and in the absence of any base.Chemical yields and enantioselectivities were very high (81-99% and up to 99% ee), but the most interesting feature of this catalytic asymmetric process was the ability to run 1,3-DC with a-substituted iminoesters 5 (R 1 = Me, 3-indolylmethyl, benzyl, phenyl, R 2 = Me) and maleimides.In this case, yields and enantioselectivities were excellent (83-99%, for 14 examples with 94-99% ee).Dimethyl fumarate and tert-butyl acrylate also gave good results as dipolarophiles.The absolute configuration of cycloadducts, generated by this catalytic mixture, corresponded to the ent-endo-6 structure (Scheme 3).Moreover, the commercially available glycine ethyl ester benzophenone Schiff base 16 (R 1 = Ph) was an equally acceptable dipolar partner for the generation of ent-endo-17 adduct in excellent yield with a 95% ee (Scheme 5). 16he copper(I)-catalysed enantioselective 1,3-DCR, was much more effective than the analogous reaction performed with chiral copper(II)-complexes. 5 In most of the cases, the exo-diastereseselectivity is almost complete obtaining in several examples mixtures of endo-and exocycloadducts.A similar number of publications of chiral silver(I) and copper(I)-complexes have been reported.In the Figure 4 chiral ligands together with their optimised copper(I) salt are shown.
The model reaction described in Scheme 3 is analogous to the reaction shown in the Scheme 6, which differs only in the catalytic complex employed and in the diastereoselectivity exhibited.In spite of their similarity, it can be emphasised that in a copper(I)-catalysed 1,3-DC of azomethine ylides and dipolarophiles the major isolated product can be the exocycloadducts 7 or their ent-exo-7 derivatives, although some examples furnished the corresponding endo-stereoisomers 6 in very high percentages.This fact differs from the tendency observed in the silver(I)-catalysed processes, which exclusively yield the endo-cycloaddition products 6.Unlike to silver promoted 1,3-DC, in the copper(I) mediated reactions, the presence of a base is always necessary due to poor basicity of the copper(I) salts employed during the formation of the chiral active complex.
The chiral ligand 32-Zn(OTf) 2 (Figure 5) complex was employed as catalyst for the 1,3-DC of arylideneglycinates 5 (R 1 = H, R 2 = Me) according to the Scheme 10. 29 The reaction was carried out with Et 3 N (10 mol%) in DCM at -20 ºC.The chemical yields were good and the enantioselectivity depended on the employed dipolarophile.Thus, with dimethyl maleate compound ent-endo-6 was achieved in 86-95% ee, and with dimethyl fumarate the same compound was obtained in 68% ee, whilst tert-butyl acrylate and NMM afforded endo-cycloadducts with lower enantioselections (70-88% ee).
A comprehensive study was done with chiral calcium(II) complexes derived from the ligands 33a and 34.As it was described in the precedent example, the endo-selectivity was in this case, almost complete in the more than fifty published examples. 30It is worthy to highlight the highest affinity of the chiral complex 33a-Ca(OiPr) 2 (10 mol%) for the 1,3-DC of tert-butyl dibenzylideneiminoglycinate and crotonates 38.The endo-cycloadduct 39 was formed in THF at -30 ºC in the absence of and added base (Scheme 11, reaction a).On the other hand, chiral ligand 34 (Figure 5) 31 was the appropriate one to perform the reaction of more sterically hindered 1,3-dipoles with crotonates, even with  several acrylates.The chemical yields of the corresponding endo-adducts 40 were very high, and the level of the enantioselection was excellent, considering the large number of examples tested and described (Scheme 11, reaction b).A set of computational calculations confirmed once more the stepwise mechanism of these chiral Lewis acid-promoted 1,3-DC.From the economical and environmental points of view, the use of cheap and naturally abundant calcium metal is quite interesting. 30ctivated azlactones 41, reacted with maleic anhydride, NPM, and acrylates to yield D 1 -pyrrolines 42 in good yields (68-89%) and high enantioselections (76-99% ee) (Scheme 12). 32The reaction occurred with the complex (2 mol%) formed by 2 equiv. of Segphos derived ligand 35 and 2 equiv. of (AuOBz) 2 at room temperature and employing a mixture of THF:fluorobenzene (for azlactones 41, R 1 = H) or fluorobenzene alone (for a-substituted azlactones).
Once the reaction was judged complete, a diazomethane surrogate or amines promoted the esterification or the formation of the amide, respectively, by the direct attack to the intermediate 43, which underwent a ring opening followed by a b-elimination regenerating the chiral gold complex (Scheme 12).Chiral bis-imine (R a )-36-Ni(ClO 4 ) 2 •6H 2 O complex (5 mol%) (Figure 5) was a useful catalyst for the reaction of iminoesters 5 (R 1 = H, R 2 = Me) with maleimides, 33 following the patterns depicted in Schemes 3 or 5.In the presence of diisopropylethylamine (DIPEA) as base (10 mol%), and 4 Å MS, in DCM at 15 ºC the endo-product 6 was diastereoselectively obtained in high yields (73-92%) and very good enantioselections (82-95% ee).
Asymmetric organocatalysis 34 is a rapidly growing area and has recently applied to the 1,3-DCR but involving special azomethine ylides and a,b-unsaturated carbonyl compounds.In Figure 6 the organocatalysts employed to date are described.
The 1,3-DC between azomethine ylides and alkenes was reported using AgF (5 mol%) and hydrocinchonine 44 (Figure 6) as chiral base in DCM, at -24 ºC for 4 days.Although it was not a pure organocatalysed reaction, a chiral base was employed in substoichiometric amounts by the first time.The reaction was only performed with methyl arylideneglycinates 5 (R 1 = H, R 2 = Me) and alkyl acrylates yielding endo-6 cycloadducts (R 3 = H) (Scheme 3) in good yields (67-> 95%) and modest enantioselections (up to 73% ee), but in some cases the final products arose up to 92% ee after recrystallisation. 35he last reference inspired the application of the asymmetric phase-transfer catalysis (PTC) concept to these cycloadditions.In this particular case the reaction of tert-butyl alaninate 53 and methyl acrylate was surveyed. 36he selected ammonium salt 45 (Figure 6) was introduced in 5 mol% loading, employing CsOH.H 2 O (20 mol%) as base, in diethyl ether as solvent, at room temperature for 42 h.As it was observed before the endo-diastereoselection was almost complete, probably due to the effect of the cesium cation, which has enough volume to favour several electronic interactions with methyl acrylate.Yields for compound 54 or the bicycle 55 were not satisfactory because the enantioselectivity obtained was very poor (25% ee) (Scheme 13).
At this point, two serious drawbacks were detected in these organocatalysed 1,3-DC of azomethine ylides and alkenes, namely the enantioselectivities and the substitutions at the different positions of both the 1,3-dipole precursor and the dipolarophile.Later, it was discovered that the (S)-prolinol derivative 46 (in 20 mol% amount, Figure 6) efficiently catalysed the 1,3-DC of arylideneiminomalonates 56 with a,b-unsaturated aldehydes 57.The transformation needed long reaction times to proceed (3 d) in the presence of 4 equiv. of water in THF at 4 ºC.Any base was needed in the process, presumably an spontaneous 1,2-prototropy shift taking place in the activated starting compound 56.This feature, together with the activation of the aldehyde as its chiral pyrrolidinium ion, supported the transition state TS-IV.The authors proposed that an efficient blockage of the Si face in the chiral iminium intermediate by the two bulky phenyl groups led to a stereoselective endo-type approach (Scheme 14). 37One disadvantage of this protocol is that the obtained products 58 required a multistep sequence to furnish the corresponding prolines.
An identical work, employing the analogous dipoles and dipolarophiles, was reported later with the novelty of using a multi-component reaction.Thus, and aldehyde, diethyl 2-aminomalonate 59, and a,b-unsaturated aldehydes were mixed in the same flask reproducing exactly the reaction conditions described in Scheme 14, but in this occasion the O-TMS protected chiral pyrrolidine 47 (20 mol%, Figure 6) was employed as organocatalyst. 38Yields (51-70%) and enantioselectivities (90-98% ee) of the endo-products 57  were very satisfactory, whilst the diastereoselectivity was moderate to good (from 4:1 to > 10:1 endo:exo ratio).
The first organocatalytic enantio-and diastereoselective 1,3-DC of azomethine ylides and nitroalkenes was optimised using the hybrid organocatalyst 48 (Figure 6), composed by a chiral quinuclidine core base and a chiral thiourea framework. 39This transformation was very limited because it was only applied to the reaction of the benzophenoneimine derivative 37 and different nitroalkenes 60, the catalyst 48 being used in 10 mol% loading.The endo-adduct 61 was isolated with a high endo:exo ratio (88:12 to 95:5 dr) (Scheme 15).
In a more recent contribution, the already mentioned three-component reaction of diethyl 2-aminomalonate, an aldehyde, and dialkyl maleates (instead of a,b-unsaturated aldehydes) was widely improved by employing the organocatalyst 49 (10 mol%) (Figure 6).The reaction, performed in DCM at room temperature in the presence of 3 Å MS, needed very long reaction times to achieve very high conversions.The endo-63 cycloadducts were obtained as unique stereoisomers with yields ranging from 70 to 97%, and very good to excellent enantioselectivities (76-99% ee) (Scheme 16).
Thiourea-catalysed enantioselective 1,3-DC of ethyl 2-(arylideneimino)malonates 56 and nitroalkanes 60 was published postulating a two-step mechanism consisting on a first Michael-type addition, followed by an aza-Henry reaction. 42The catalyst 50 (10 mol%), the 1,3-dipole precursor 56 and several nitroalkenes 60 were dissolved in toluene and allowed to react at 0 ºC for 9 h, then 2,2,2-trifluoroethanol (30 equiv.) was added, and the reaction continued at 0 ºC for another additional 36 h.This last additive, having a more acid proton than ethanol, was used to promote the aza-Henry reaction of the initially formed Michael-type adduct 64 to yield diastereoselectively (> 91:9 dr), compounds endo-65 in good yields and good enantioselectivities (Scheme 17). 42onsidering the concept of organocatalysis monitored in the firstly reported enantioselective 1,3-DC of azomethine ylides and alkenes, namely chiral hydrocinchonidine:AgF, 35 hydroquinine 51 (6 mol%, Figure 6) was found to be the best chiral base, together with AgOAc (to fix the geometry of the intermediate 1,3-dipole), in the synthesis of the chiral building blocks endo-67. 43These products are the scaffolds for the elaboration of new active agents against the hepatitis C virus (HCV). 44Although chemical yields were very good, the enantioselection was moderate (74% ee) (Scheme 18, and Table 1, entry 1).In fact, a further 1,1'-binaphthyl- 2,2'-dihydrogen phosphate assisted chiral resolution of 67 was required in order to obtain pure compound endo-66 with a 99.8% ee. 43owever, the first enantioselective synthesis of the fivemembered core of these structures was performed by using the chiral metal complex formed from phosphoramidite (S a ,R,R)-11 (Figure 3) and AgClO 4 (both in 5 mol%) as catalyst.The reaction performed at −20 ºC furnishes a good yield in compound endo-67 (X = CH, R 1 = Me, R 2 = tBu) with a high enantioselection (Scheme 18, and Table 1, entry 2).In this work, the synthesis of enantiomerically enriched product 68 (82% ee) was also reported after amidation and double hydrolytic sequence involving TFA/0 ºC followed by treatment with KOH-MeOH/80 ºC. 14,45The Box ligand 33b and calcium isopropoxide formed a chiral complex, which was used to catalyse the process either at −44 or −30 ºC in THF as solvent.Yields are high and the enantioselectivities are the highest reported to date for compound 67 (85 and 88% ee) (Scheme 18 and Table 1, entries 3 and 4). 30ccording to the results described, a clear comparison can be established between organocatalysed and chiral Lewis-acid catalysed 1,3-DC process in the synthesis of cycloadducts 67.The procedure involving chiral metal complexes was found much more advantageous from the operational and economical points of view (any additional optical resolution was needed and the low cost of the calcium salt is evident) and the enantioselectivities are the highest reported to date.An acid-base dual-functional catalysis using the axially chiral guanidine 52 (2 mol%) was studied in the model 1,3-DC of azomethine ylides derived from starting material 5 (R 1 = H, R 2 = Me) with dialkyl maleates has been reported. 46The stereochemistry obtained was the represented by compounds ent-endo-6 (Scheme 3) and were isolated with high endo-diastereoselectivities (> 98:2), in moderate to good yields (53-80%), and notable enantioselectivities (59-91% ee).Unfortunately, another dipolarophiles failed or gave raise cycloadducts with very poor optical purity.This dual mechanism was proposed on the basis of the double hydrogen bond formation between the organocatalyst and the dipole, and the soft activation of the maleate by the different electronic part of the guanidinium cation in the plausible transition state TS-V. 46valuating the whole data presented in this section, the organocatalysts and the chiral metal complexes have completely different behaviours concerning the 1,3-dipole and dipolarophile.Organocatalysts, unless that their basicity is relatively high, require a very activated arylideneiminomalonate 56 as 1,3-dipole precursor, and in many cases, their successful enantioselective process is limited to one dipolarophile.In this sense, structural limitations are notable and there are not wide-scope transformations at the moment.However, as it was described in the last example, these structural drawbacks could probably be overcome soon.By contrast, the chiral metal complex-catalysed enantioselective approach has been much more studied and the structural limitations are minimal, finding very interesting broad scopes for several chiral metal complexes.The fine tuning of the chiral ligand coordinated to the cation internal sphere allows to induce highest enantioselections, even being possible to modify the transition state to furnish the opposite configuration in the final product.The endo:exo ratio can be selected by adding the appropriate chiral metal complex, nevertheless only endo-products are mainly obtained from the organocatalysed 1,3-DC of azomethine ylides and alkenes.The metal-catalysed reactions are normally performed with lower catalyst loadings and shorter reaction times than those required for organocatalysed processes.Also, in organocatalysed transformations, the presence of additives is crucial for achieving very high enantioselections, and it is strongly dependent of the involved mechanism: this is not common in chiral metal complex-assisted asymmetric cycloadditions.The recovery and reutilisation has also been accomplished in the metal-catalysed 1,3-DC but much work must be still done in this area in the future.

Nitrones
The chemistry of nitrones 71, or azomethine oxides, is hugely varied, 47 but it is ultimately dominated by their use as 1,3-dipoles for cycloaddition reactions. 3,48Although the most common 1,3-DC involving nitrones, is the formation of isoxazolidines 72 and 73 49 using different alkenes as dipolarophiles (Scheme 19), other different multiply bonded systems may also be used such as alkynes, allenes, isocyanates, nitriles, thiocarbonyls etc.The isoxazolidine adducts 72 and 73 contain up to three new stereogenic centres and the reaction products can be predictable according to the experiences, results, and frontier molecular orbital (FMO) theory.The E/Z-interconverting nitrones 71 reacted with electron-rich alkenes through a nitrone oxygen atom attack to the a-position of the electron-rich alkene.However, this oxygen atom can also react at the b-position of the electron-poor alkenes (Scheme 19).Often, diastereomeric pairs of exo-and endo-adducts are formed under thermal conditions.Steric hindrance is of importance to control the approach of the alkenes towards the nitrones.Operating under metal-catalysed or organocatalysed processes, and working at low temperatures, the overall control of the absolute configuration of each stereogenic centre can be achieved, obtaining diastereoselectively the endo-cycloadduct, but with a non-predictable regioselectivity.
Once formed the isoxazolidine N-O bond may be reduced to a large series of products of potential interest such as 1,3-aminoalcohols.One of the reasons for the success of the synthetic application of nitrones is that, contrary to the majority of the other dipoles, most nitrones are stable compounds and do not require an in situ formation.
Metal-catalysed asymmetric 1,3-DC reactions involving nitrones became an important research field from the pioneering work of Jørgensen et al. 50in 1996.Continuing with the coverage, several examples have been found in the literature using the metal complexes shown in Figure 7.
A large series of chiral ruthenium(II) complexes 74-78 (Figure 7) have been tested (5 mol%) in 1,3-DC of nitrones 92-95 and methacrolein at different temperatures, the best results being presented in Scheme 20. 51 As it was reported, chiral complexes 74b and 74c gave the best 3,4:3,5 regioisomeric ratios, and compounds 97-99 were obtained as unique 3,5-regioisomers.In general, the enantioselectivities were very low, whilst chemical yields were very high or quantitative.
However, more important and attractive results were obtained with chiral iridium and rhodium complexes 79, and 80 (Figure 7).Particularly, iridium complex 79 (10 mol%, L = enal ligand better than H 2 O) was an adequate catalyst to perform the 1,3-DC of the nitrone 92b with a,bunsaturated aldehydes 100 at -25 ºC.The product 3,4-endo-101 was regio-, diastereo-and enantioselectively generated in very good yields and enantioselectivities (up to 94% ee), (Scheme 21, reaction a).Nitrone 95 exhibited a different regioselection depending on the used dipolarophile when the selected catalytic complex was 80 (10 mol%).The major 3,5-endo-adduct 102 was selectively generated from the intermediate akin to complex 80 (L = H 2 O), when the reaction was run with methacrolein (98% yield, and 73% ee) (Scheme 21, reaction b).Unlike the last optimised reaction conditions described, the reactions carried out with a,b-unsaturated aldehydes 100 and nitrone 95 were better asymmetrically induced by chiral complex 80  reaction c). 52The chiral environment of complexes 79-83 (Figure 7) was originated by the coordination with different diphosphanes, but the most synthetically useful complex was obtained when chiral 1,2-(diphenylphosphino) propane (R-Prophos) was employed (complexes 79 and 80).Interestingly, complexes 81-83 gave better results than catalysts 79 and 80 in the 1,3-DC was surveyed with nitrones 92b, and 95 with a variety of dipolarophiles. 52n efficient regio-, diastereo-, and enantioselective transformation of several nitrones with allylic alcohols promoted by the chiral complex formed by diethylzinc and (R,R)-diisopropyl tartrate (DIPT) was achieved 84 (20 mol%, Figure 7). 53In several examples, this reaction provided an approach to highly functionalised 3,5-transisoxazolidines with almost complete enantioselectivity (up to 83% yield and up to > 99% ee).But the scope of this transformation is very narrow because, when a structural modification of the starting materials was introduced, dramatic changes in the regio-, diastereo-, and enantioselections were observed.
Bistitanium species 85 (Figure 7) have been exploited as chiral Lewis acids in the 1,3-DC of nitrones 104 with methacrolein or a,b-unsaturated aldehydes 100. 54The catalyst 85e (R = I, 10 mol%) promoted efficiently the cycloaddition of nitrones 104 with methacrolein in DCM at 0 ºC, affording isoxazolidines 3,5-endo-105, in good chemical yields (48-80%) and excellent enantioselectivities (up to > 99% ee).The key of the success of this transformation was the introduction of bulky N-substitution on the nitrone (benzhydryl group) in order to attenuate the undesired Lewis acid-nitrone complexation (Scheme 22, reaction a).This analogous structural detail was also considered in the 1,3-DC with a,b-unsaturated aldehydes 100.In this case, the formyl group had to be reduced in situ with NaBH 4 to avoid undesirable epimerisations.The endo-3,4-cycloadducts 106 were finally isolated in good to excellent both chemical yields (83-99%), and enantioselectivities (81-98% ee) (Scheme 22, reaction b).Cycloadducts 106 were transformed into enantiomerically pure b-amino esters after three conventional steps in 43% overall yield (from 106). 54hen copper(II) and titanium(IV) complexes 86 and 87 (Figure 7), were employed as catalysts (25 mol% loading) in the 1,3-DC of nitrones 92b and acryloyl derivatives, the results were very poor in terms of the regio-, diastereo-and enantioselectivity, showing the transformation a narrow scope. 55,56Fortunately, modification of chiral complex 86 in very good yields (65-92%) (Scheme 23).According to the authors, and based on the observed enantioselectivity, the s-trans-enone template was accommodated in the intermediate complex 110 by a π-π stabilisation through a phenyl group.This interaction blocked the approach of the dipolarophile by the Re-face of the a-carbon-carbon double bond. 57he new generation of cationic chiral dirhodium carboxamidates 89 (Figure 7) were tested as catalysts in the reaction depicted on reaction a in the Scheme 20.The yields were good (50-90%) and the enantioselections were, in some cases, very important (up to 94% ee).Unfortunately, the isolated mixtures of both 3,4-and 3,5-endo regioisomers 96 could not be avoided. 58abox-Bn-Mg II 90a, and Xabox-Bn-Mn II 90b complexes (Figure 7) (10 mol%) were found to be efficient  59 Although in several reactions a relative high proportion of exo-cycloadduct 112 was obtained, this problem could be minimised by replacing the magnesium central atom by manganese or vice-versa.Chemical yields, regio-, diastereo-, and enantioselections were quite high, as it is shown in Scheme 24.
Again, the model reaction drawn in reaction a of the Scheme 20 was employed to evaluate the catalytic activity of chiral complexes 91 (Figure 7) (5 mol%).In these examples, as it was described in the above mentioned reaction promoted by catalysts 89, the major 3,5-endoadduct 96 was impurified with very important amounts of its 3,4-endo-96 regioisomer.Chemical yields were high (77-95%) and the enantioselectivity moderate to high (44-94%) when the procedure took place in DCM at -10 to -20 ºC. 60heme 24.The organocatalysed reactions involving cycloadditions between nitrones and alkenes have been recently mediated by the organocatalysts shown in Figure 8.
The chiral N-triflyl phosphoramide 114 (Figure 8) was used in the 1,3-DC of nitrones 92 and ethyl vinyl ether.5 mol% of this air stable organocatalyst was enough to lead to complete the reaction in 1 h, obtaining products 3,5-endo-117 (74%-quant.yield, and up to 93% ee). 62he endo-selectivity of this cycloaddition was also important (up to 97:3 endo:exo ratio) taking into account the high electron density of the employed dipolarophile (Scheme 26).The proposed mechanism that explained the elevated stereocontrol is based on dominant secondary π-orbital interactions deduced by computational calculations.
In addition to 1,3-DC of azomethine ylides and alkenes, organocatalyst 47 (10 mol%) (Figure 8), has also been reported for the cycloaddition of nitrones 92 with a,b-unsaturated aldehydes 57 (Scheme 22, reaction b). 63The reaction proceeded in toluene at room temperature in around 24 h.The resulting 3,4-ent-endo-cycloadducts (relative to the structure of compound 106) did not epimerise at all, and for this reason the formyl group was not necessary to be reduced.The enantioselectivity (88-96% ee) was higher than the one for the analogous obtained in the same reaction catalysed by chiral complex 85 (Scheme 22, reaction b).In both transformations the diastereoselectivity was very high (up to 99:1 endo:exo ratio). 63y contrast, the analogous reaction represented in reaction b of Scheme 22, performed with Binam-diamides 115 (Figure 8) (10 mol%), in nitromethane as solvent at 0 ºC, afforded mixtures of endo:exo cycloadducts with moderate to good enantioselections (61-95% ee) but never improving the results obtained in this reaction organocatalysed by the prolinol derivative 47. 64 Evaluating all these results described in the 1,3-DC with nitrones, we can observe chiral metal complexes and organocatalysts, do not have a preference for a determined 3,4-or 3,5-regioisomer.However the endo-diasteresoselectivity achieved was almost total independently of the metal used, whilst major endo-or exo-cycloadducts can be obtained depending of the organocatalyst employed.In other words, it is possible to select the catalyst to generate 3,4-or 3,5-regioisomers of each exo-or endo-cycloadducts with elevated stereocontrol.A very important feature of this particular cycloaddition is that the electron-rich alkenes, in contrast to the preference of the azomethine ylides, can be efficiently employed as dipolarophiles with nitrones.However, some parameters must be improved, such as: (i) the amount of the catalyst employed, which is rather high, and (ii) a wide scope of the catalyst, because most of the 1,3-DCs described in this section are restricted to one or a small number of dipolarophiles.

Nitrile Oxides
Nitrile oxides 119 are prone to dimerise or polymerise, especially upon heating.With the aim to avoid the dimerisation process, these 1,3-dipoles must be generated in situ.There are many methods described for their preparation, 3 dehydrohalogenation of hydroxymoyl chlorides 118 and dehydration of nitroalkanes being the most frequently used strategies.In this section all the nitrile Scheme 27.

HO N
Cl 118 oxides were obtained following the dehydrohalogenation route.The regioselectivity of the 1,3-DC of nitrile oxides and alkenes or alkynes is easily predictable.For monosubstituted alkenes and electrophilic olefins the major regioisomer are isoxazoles or isoxazolines 49 120a and 120b are, respectively, isolated as pure compounds (Scheme 27).At maximum, only two stereogenic centres can be generated employing a catalytic enantioselective version of this reaction.
In 2004 the first chiral metal-catalysed 1,3-DC involving nitrile oxides and electron-deficient alkenes was published. 65Following this seminal work, several attempts were made, including also cycloadditions catalysed by chiral metal complexes added in stoichiometric amounts. 66,67o the best of our knowledge, any organocatalysed 1,3-DC of nitrile oxides and alkenes have been reported yet, and the most relevant Lewis acids are covered in this review and represented in Figure 9.
The catalytic chiral ruthenium(I) complex 91b (Figure 9), already described in 1,3-DC between nitrones and alkenes, was employed (5 mol%) in the reaction of nitrile oxides 125 and methacrolein.The reaction was completed in DCM, at -5 ºC after 16-47 h, with slow addition of the nitrile oxide (10 h) to the solution containing all the reactants.The further reduction of the formyl group was carried out immediately to avoid epimerisations.The 3,5-disubstituted isoxazolines 126 were obtained in moderate-good yields (43-71%), as single diastereoisomers (3,5-cycloadducts), with moderate to good enantioselections (63-93% ee) (Scheme 28). 60,68he chiral complexes formed by ligands 121 and 122 with Yb(OTf) 3 (Figure 9) were independently tested in the 1,3-DC of nitrile oxides 125 and the (Z)-allylic alcohol 127.In both reaction a and b of the Scheme 29, almost equimolar amounts of isoxazolines 3,5-128 and 3,4-128 were isolated.The reaction catalysed by the complex 121-Yb(OTf) 3 afforded lower yields and poorer enantioselectivities than the analogous reaction activated by the chiral complex 122-Yb(OTf) 3 (up to 70% ee) (Scheme 29). 69,70A similar behaviour, of these last two chiral complexes was exhibited in the reaction of nitrile oxides 125 and a,b-unsaturated esters. 69,70e catalytic activity of nickel(II) ligated by 123 (Figure 9) (10-20 mol%) was demonstrated in the 1,3-DC of nitrile oxides 125 and a,b-unsaturated systems 129 (Scheme 30). 71In several examples, the regioisomeric ratio could be inverted, but maintaining an elevated stereochemical control.The high level of asymmetric induction was attributable to the highly selective approach of the nitrile oxides towards the Si face of the proposed hexa-coordinated nickel(II) complex, whilst the Re-face attack was shielded by one of the xylylquinoline moieties.
Very recently, it has been regarded that nitrile oxides can be obtained from hydroxymoyl chlorides in the presence of 3 Å or 4 Å molecular sieves (MS) as mild solid bases. 72This property was immediately applied to the enantioselective synthesis of isoxazolines by adding slowly the mixture of compound 118 and the alkene 131 onto a mixture containing the chiral nickel(II) complex 124 (10 mol%) and 4 Å MS (500 mg mmol -1 of 118). 72The results obtained from this transformation were excellent just for a reduced set of examples (Scheme 31).Chemical yields and enantioselectivities for heterocycles 132 were very high (65-94% and 90-98% ee, respectively).
In general, the 1,3-DC of nitrile oxides afforded mainly 3,5-regioisomeric isoxazolines with rare examples generating amounts of 3,4-regioisomers.The chiral Lewis-acid control gave good enantioselections of heterocyclic compounds, perhaps, the catalyst amounts are too elevated in some cases and the reaction conditions have to be carefully checked to achieve the best results.

Diazoalkanes and Carbonyl Ylides
For a long time, diazo-compounds 133 have been one of the most synthetically useful classes of 1,3-dipoles because, in contrast to other 1,3-dipoles that are generated as transient species, they could be prepared and isolated in pure form. 3he cycloadditions with double or triple bonds (including heteroatoms) have been widely surveyed (Scheme 32).The reaction with electrophilic olefins occurred such as it is depicted in Scheme 32, the carbon atom reacted at the 4-position of the electrophile with almost total selectivity to yield pyrazoline or pyrazole derivatives 134 or 135.Nevertheless, some mixtures of regioisomers are obtained by reaction with electron-rich alkenes.In addition, the reaction of diazoalkanes with nitriles also gave good regioselectivities of the corresponding compounds 135 (Scheme 32).
The employment of catalytic chiral metal complexes (Figure 10) in the 1,3-DC of diazocompounds and alkenes or alkynes constitutes a new emerging area because all the published contributions appeared in a three year period.
The first catalytic enantioselective 1,3-DC between diazoacetates 141 and substituted acroleins employed the chiral Binol-titanium(IV) complex 136 (10-50 mol%, Figure 10). 73The reaction occurred in DCM at -40 ºC affording 2-pyrazolines 142 in good yield (52-85%) and high enantioselections (81-95% ee) (Scheme 33).The resulting compound was formed after a spontaneous double bond isomerisation in the pyrazoline ring due to the presence of the electron withdrawing group (CO 2 R 1 ) at the 3-position.This methodology was successfully applied to the synthesis of (-)-manzacidin A 143, which is an interesting an rare alkaloid found only sparingly in the nature.
Later on, a set of chiral catalytic complexes were used for achieving high enantioselections in processes involving diazoalkanes and carbonyl ylides (Figure 10).As an example, a method for the enantioselective synthesis of 2-pyrazolines 145 through a magnesium(II)-catalysed cycloaddition of a-diazoesters 141 to a,b-unsaturated pyrazolidinone imides 144 was reported. 74This synthesis allowed the introduction of several substituents in the dipole acceptor 144, but a higher amount of the chiral Lewis acid 137 was needed to achieve very good enantioselections (90-99% ee) and high yields (52-91%) for the pyrazoline 145 (Scheme 34), even when the reaction was performed at 50 ºC for 48 h.(-)-Manzacidin A 143 was further prepared from 145 as key intermediate.
In some particular examples, diazoalkanes can be transformed into carbonyl ylides as intermediate species, which are able to react with several dipolarophiles.1-Diazo-5-phenylpentane-2,5-dione 146 was transformed into the corresponding rhodium carbene, which underwent an intramolecular attack by the oxygen atom to generate a fleeting carbonyl ylide 147.This reactive species was immediately trapped by aromatic aldehydes acting as dipolarophiles, yielding exclusively the exo-cycloadducts 148 in moderate yields (21-71%) and relative good enantioselectivity (61-92% ee) (Scheme 35, reaction a). 75n order to improve chemical yields and enantioselectivities it was necessary to stabilise both the rhodium carbene and  the carbonyl ylide.For this purpose, tert-butyl 2-diazo-3,6-dioxoheptanoate 149 was selected as starting material in the domino rhodium carbene formation-cyclic carbonyl ylide generation-cycloaddition reaction catalysed by the chiral dirhodium complex 139 (Figure 10).Alkenes and alkynes reacted with the transient carbonyl ylide type 147 at room temperature to afford exclusively exocycloadducts 150 in very good yields (60-94%) and excellent enantioselectivities (Scheme 35, reaction b). 76his rhodium-catalysed procedure was utilised in the asymmetric synthetic approach to the pentacyclic skeleton of Aspidosperma alkaloids.In this way, fused pentacyclic scaffold endo-151 was isolated in 43% yield and and 66% ee.The reversal diastereoselection observed in this example was attributable to steric hindrance of part of the functional groups present in the precursor material. 77The intramolecular version of this reaction was evaluated with analogous starting compounds bearing the alkene moiety (dipolarophile) placed at the R 1 substituent in molecules 149 at the appropriate distance.The rhodium complex 138 (Figure 10) (10 mol%) was the best catalyst but the enantioselection of the process was very disappointing (up to 44% ee). 78igh levels of asymmetric induction were observed in the dipole-LUMO/dipolarophile-HOMO controlled cycloaddition reactions between 2-benzopyrilium-4enolates and vinyl ether derivatives.The difference between Schemes 35 and 36 was that a chiral Lewis acid, apart from the rhodium complex, was required to perform the cycloaddition step in Scheme 36, and consequently no domino sequence existed.Chiral nickel(II) complex derived from ligand 123 (Figure 9) (10 mol%, Figure 10) proved to be the most suitable catalyst for the 1,3-DC initiated by the most stable carbene precursor 152, yielding, after 1 h at room temperature, endo-153 products as major diastereoisomers in good yields (78-96%) and high enantioselectivities (77-97% ee) (Scheme 36, reaction a). 79evertheless, when the reactions were performed with diazoalkanes 154, chiral complex 140 (10 mol%) offered the best results for cycloadducts 155 (using dihydrofuran as dipolarophile) or 156 (if butyl vinyl ether was employed).These two different dipolarophiles exhibited contrary diastereoselections.Whilst dihydrofuran mainly afforded an endo-cycloadduct 155, butyl vinyl ether furnished the exo-cycloadduct 156 as major diastereoisomer.In both transformations the chemical yields were good but the enantioselections were modest (59 and 67% ee, respectively) (Scheme 36, reaction b). 79ny comparison between organocatalysed process and chiral metal complex-catalysed reactions can be made dealing with 1,3-DC involving diazoalkanes or the elegant in situ generation of carbonyl ylides-1,3-DC domino process.The metal catalysts afforded preferentially endoadducts and both type of dipoles reacted with dipolarophiles different from electrophilic alkenes, such as electron-rich alkenes and alkynes, carbonyl groups, vinyl ethers, etc.

Phosphonium-inner Salts
In previous sections all the discussed 1,3-DCs afforded five-membered ring heterocycles in an enantioselective manner, but five membered carbocycles are very important systems due to their significance and utility in many scientific areas.From a series of elegant [3+2] cycloaddition reactions affording these mentioned carbocycles the cycloaddition of allenoates and electron-deficient alkenes or imines catalysed by tertiary phosphanes, deserves to be described. 80,81his so called Lu's [3+2] cycloaddition 82 is normally triggered by the phosphane attack to the b-carbon of the alkyl allenoate (or alkyl propiolates) generating a 1,3-dipole 161, which is an inner salt containing a phosphonium cation (Scheme 37).It was confirmed that the generation of the 1,3-dipole is the rate determining step.These zwitterionic species are ready to undergo 1,3-DC with the electrophilic alkane (the Michael-type addition step occurred by attack of the a-position of the allyl anion 161 onto alkene) generating an intermediate betaine 162, which was transformed into the stabilised In addition, if an imine is employed as dipolarophile a D 3 -pyrroline 160 is formed.All the mechanistic aspects of this reaction were supported by computational calculations and also demonstrated that this is a stepwise process.However, the initially postulated intramolecular [1,2]-or [1,3]-hydrogen shifts are impossible to occur owing to the existence of very high activation barriers.
The discovery of the beneficial effect of a small amount of water (traces) in the phosphane also supported this last hypothesis spite of performing the reactions under anhydrous conditions. 81he enantioselective version of this transformation has been attempted with chiral phosphanes shown in Figure 11, obtaining very good results of enantiomerically enriched polysubstituted cyclopentenes.
In the first catalytic enantioselective reaction, several chiral phosphanes were screened as catalysts and it was observed that bicyclic phosphane 165 (Figure 11) (10 mol%) afforded the enantioselection (up to 93% ee) and good chemical yields (up to 88%), when the reaction of allenoates 157 and a,b-unsaturated esters 172 was performed at 0 ºC or room temperature.The major isolated product (up to > 99:1) was a-173 as result of the already mentioned attack of the intermediate allyl anion onto the electrophilic alkene through its a-position (Scheme 38). 83iral phosphepine (R)-166 (10 mol%) (Figure 11) catalysed the asymmetric [3+2] cycloaddition of allene 157 with a wide array of enones (Scheme 39). 84It is worth noting that the opposite regioisomer g-176 (relative to the reaction done with acrylic esters shown in Scheme 38) was preferentially obtained in good chemical yields and good enantioselectivities (Scheme 39, reaction a).In addition, spirocyclic compounds, such as g-179, was readily prepared from the reaction of 157 and 178 catalysed by (R a )-166, generating adjacent quaternary and tertiary stereocentres with a 95% ee in only one reaction step (Scheme 39, reaction b). 84n identical behavior was found when the reaction shown in reaction a of the Scheme 39, was performed under the modulation of chiral ferrocenyl phosphane 167 (10 mol%, Figure 11).Cycloadducts g-176 were preferentially formed (8:1 to > 20: < 1) in good yields (up to 87%) and slightly higher enantioselectivities than the results commented for Scheme 38.The synthesis of other spirocyclic systems similar to 179 was attempted obtaining, in general, very good yields and enantioselectivities (88% and 80% ee). 85s it was described above for Lewis acids, organocatalysts can also control the regioselectivity of the 1,3-DC.Although a chiral phosphane promoted the formation of the g-adducts in the presence of a,b-unsaturated ketones (chalcones), the (diphenylphosphino) methylglycine derivative 168 (10-100 mol%, Figure 11) induced a completely opposite regiochemistry, favouring the generation of the cycloadduct a-181 at -25 ºC in toluene in short reaction times (Scheme 40, reaction b).The a-181 and a-184 products were obtained in good yields and high enantioselections (70-84% ee, and 87-93% ee, respectively) (Scheme 40). 86The analogous reactions catalysed by the Diop ligand 169 were not so successful because the enantioselections achieved of the major cycloadducts a-181 were modest (up to 77% ee), 87 and never improved the previous results described in Scheme 40.

Conclusions
The enantioselective 1,3-DC is of considerable interest in diversity oriented synthesis (DOS) 93 because its stereospecificity enables stereochemical diversification of up to four tetrahedral centres on different five membered carbo-or heterocycles.The generation of this stereogenic centres occurs in only one reaction step, but the optimisation of the reaction conditions is a very difficult task.There are multiple parameters to control with the aim to achieve the maximun levels of selectivity.In addition, a minimal modification or change in structures, ligands, solvent, additives, temperature, anion, cation etc., can cause a dramatic change in regio-, diastereo-or enantioselectivity of the process.The wider scope procedures corresponded to the Lewis acid promoted 1,3-DC using azomethine ylides and, to a lesser extent, nitrones.
Broad scopes, recovery of the catalyst and catalyst loadings are the three drawbacks to overcome by organocatalytic processes, whilst the recovery of the catalytic chiral metal complex has been scarcely documented and covering a narrow scope with structural limitations.
Organocatalysed and Lewis acid-catalysed 1,3-DC are two complementary and necessary tools in current asymmetric synthesis.The metal catalyst promoted 1,3-DC is much more studied than the corresponding reactions mediated by organocatalysts, but enormous efforts are directed in improvements on the efficiency of both type of catalysts.

Figure 9 .
Figure 9. Defined chiral complexes or chiral ligand/metal salts combinations employed in the 1,3-DC of nitrile oxides and alkenes.

Table 1 .
Catalytic enantioselective synthesis of compounds 67 aIn brackets (x, y or z mol%); b Isolated yield; c ent-67 was obtained.
92e chemical yields were good (68-90%) and the range of enantioselections was 94-98% ee (Scheme 41).It was likely that H 2 O (consistent with the stepwise [3+2] mechanism explained previously) effected protonation of the basic ylide intermediate 164 (Scheme 37) to form a pentavalent hydroxyphosphorane intermediate.The role of Et 3 N is to promote the b-elimination and the liberation of the phosphane catalyst.The authors proposed an initial interaction of the thiourea moiety with the phosphanoyl group.Secondary interactions (π-π stacking or C=O•••Ar) between the amide portion of the catalyst and the benzhydryl group of the imine could also provide additional selective stabilisation of the lowest energy transition state.92