Resumo em Inglês:

The aim of this research was the replacement of conventional sample extraction techniques for polycyclic aromatic hydrocarbons (PAH) in tissue samples for a reliable, fast and eco-friendly procedure. The method was developed using a pressurized solvent extraction method and assessing two different standard reference materials (fish and mussel) and freeze-dried and fortified sardine samples (Sardinella sp.). Five different extraction procedures were evaluated and the best performance comprised 1 g of lyophilized tissue, 5 g of deactivated (5%) silica, a dichloromethane:methanol (4:1 v/v) mixture, a temperature of 80 °C, three cycles, 10 min of static time and 90 s of purge time. The method selected following these tests was further validated through the analysis of nine replicates of the National Institute of Standard and Technology (NIST) reference material No. 2976, resulting in an effective recovery of 83 ± 14%. The means and uncertainties attained for each PAH were equivalent to those of the reference material, corroborating the reliability of the developed method. A shorter processing time, less use of solvents and reagents and lower extract manipulation produced an effective method aligned with green-chemistry guidelines.

Resumo em Inglês:

Analytical methods for determining 14 endocrine-disrupting compounds (EDCs) in coastal waters, suspended particles, and sediment samples were successfully performed by ultrafast liquid chromatography with photodiode array and fluorescence detections (UFLC-PDA-FLD). Solid phase extraction (SPE) and ultrasound-assisted extraction (USE) were used for sample preparation. Two chromatographic methods have been developed. An isocratic separation method was used to separate bisphenol A (BPA) and steroids and another gradient elution method to separate phthalates and alkylphenols. The detection by fluorescence was used for alkylphenols, BPA, and steroids and photodiode array (PDA) for phthalates. Limits of detection (LOD) ranged from 0.41 (4-tert-octylphenol (4tOP)) to 63 ng L-1 (dibutylphthalate (DBP)), 0.41 (4tOP) to 63.2 ng g-1 dried weight (dw) coastal waters, and solid samples (suspended particulate matter (SPM) and sediment samples), respectively. Recoveries ranged from 52 (diethylphthalate (DEP)) to 116% (DBP) for water, from 54 (DEP) to 108% (estrone (E1)) for SPM, and from 62 (4-n-nonylphenol (4nNP)) to 117% (4-n-octylphenol (4nOP)) for sediment samples. Finally, with the minimization of reagents and energy, the proposed methods were applied to samples collected from Todos os Santos Bay (BTS), Bahia, Northeastern Brazil.

Resumo em Inglês:

The present investigation describes the synthesis of novel cinnamides and a bis cinnamate bearing 1,2,3-triazole functionalities and investigation of their antiproliferative and antimetastatic effects on melanoma cells. The necessity for the development of new chemotherapeutic agents for melanoma treatment motivated this work. Sixteen derivatives were obtained with yields ranging from 23-81% and fully characterized by spectroscopic (1H and 13C nuclear magnetic resonance, infrared) and spectrometric high resolution mass spectrometry (HRMS) techniques. The derivatives were in vitro evaluated against B16-F10 murine melanoma cell line. The most effective compound (a bis cinnamate) (6b) reduced the melanoma cell viability, generated cell cycle arrest, and influenced the metastatic behavior of melanoma cells by decreasing migration, invasion, and colony formation. Based on these findings, it is believed that compound 6b may represent an interesting scaffold to be explored toward the development of new antimelanoma agents.

Resumo em Inglês:

With agaric as carbon source and urea as nitrogen source, this paper has successfully synthesized nitrogen-doped carbon quantum dots (N-CQDs) by simple one-step hydrothermal method. A series of analysis have been used to make characterization of the physical, chemical structures and optical performance of N-CQDs. The fluorescence stability was studied by examining the ionic strength, pH value and storage time and other conditions. The cytotoxicity and bacterial toxicity of N-CQDs were applied to biological imaging. Considering the quenching effect of 2,4-dinitrophenol (2,4 DNP) on the fluorescence generated by N-CQDs, N-CQDs have been used as fluorescence probe in detection of 2,4-DNP where N-CQDs showed high sensitivity, selectivity and strong disturbance resistance to 2,4-DNP based on the quenching mechanism of transfer of resonance energy. It can also be concluded that agaric-based N-CQDs can be used in bio-imaging due to a good inhibitory effect on but low toxicity to bacteria. Under the optimal experimental conditions, the probe has presented a good coefficient of determination (R2 = 0.9969) and a low limit of detection (15.78 nM). This method has been successfully applied to determine 2,4-DNP in environmental samples and provided a new idea for developing green and natural composite carbon materials.

Resumo em Inglês:

This study aimed to develop a reliable stability-indicating method (SIM) for amoxicillin 500 mg capsules (DP-drug product). A literature review addressing amoxicillin (AMX; DS-drug substance) forced degradation studies and the existing SIMs was conducted to verify the most significant outcomes. Subsequently, the forced degradation of DP and DS was carried out following the Brazilian Health Surveillance Agency (ANVISA) guidelines, including thermal degradation (dry and wet heat), acidic and alkaline hydrolyses, hydrogen peroxide oxidation, reaction with copper, and photodegradation. Both DS and DP were more susceptible to 0.015 M NaOH, resulting in approximately 50% degradation. AMX DS and DP were not significantly photodegraded, but some degradation products (PDegs) showed susceptibility to light exposure. Thermodegraded samples showing ≥ 10% degradation exhibited modified profiles in thermogravimetric (TG) and differential scanning calorimetric (DSC) analyses. The X-ray powder diffraction patterns (XRPD) of DS samples exposed to dry and wet heat displayed complete amorphization of AMX, attesting to the occurrence of physical degradation concomitantly with chemical degradation, which can alter the drug’s bioavailability. In contrast, the thermodegraded DP samples exhibited intact AMX crystals interspersed with the amorphous form, perhaps partly protected by the excipient. The validated SIM was able to detect and quantify about 80 PDegs.

Resumo em Inglês:

Dipteryx alata Vogel is a native fruit from Brazil, which has been poorly investigated concerning its phenolic composition and the biological effects of its pulp + peel. Thus, in this study we evaluated the antioxidant activity and total phenolic content of the D. alata pulp + peel extracts obtained with different solvents, as well as determined the phenolic compounds by ultra-high performance liquid chromatography tandem mass spectrometry (UHPLC-MS/MS) analysis. In addition, cytotoxic effects of D. alata pulp + peel extract on non-tumor and cancer cell lines were investigated for the first time. The results showed that phenolic compounds can be efficiently extracted from pulp + peel of D. alata by organic solvent-water mixtures as an extraction system. The developed UHPLC-MS/MS method allowed the quantification of eighteen phenolic compounds in D. alata pulp + peel extract for the first time, which luteolin and trans-cinnamic acid were predominant. In addition, D. alata pulp + peel extract exhibited better cytotoxity against SiHa and C33A cervical cancer cell lines, while weak cytotoxicity was noticed against non-tumor HaCaT and L929 cell lines, pointing out its safety and providing preliminary evidence of its anticancer potential. Our findings indicate that D. alata pulp + peel can be explored as a natural source of phenolic compounds with promising antioxidant and cytotoxic properties.

Resumo em Inglês:

A simple, fast, and low-cost process to fabricate arrays of copper microelectrodes (CuMEs) based on disposable electronic microchips is described. Arrays with 8 to 20 CuMEs were characterized by energy-dispersive X-ray spectroscopy and cyclic voltammetry techniques. The closest interelectrode distance in the arrays is 358 ± 22 µm, and the minor radius ranged from 10.6 to 13.5 µm. The microchips with CuMEs were sealed in epoxy resin to fabricate the rod and flat-shaped platforms, allowing the CuMEs to be addressed separately. Glucose, hydrazine, and nitrate were used as analyte models for voltammetric and amperometric detection at CuMEs arrays, showing excellent performance in batch and flow-through cells. Glucose measurements carried out with flow injection analysis system with amperometric detection at an array of 20 CuMEs showed a wide linear range (0.020-4.0 mmol L-1), high sensitivity (734.1 µA L mmol-1 cm-2), and a limit of detection of 1.7 µmol L-1.

Resumo em Inglês:

In this work, we explored the synthesis of 4,4-difluoro-4-bora-3a,4a-diazas-indacene (BODIPYs) bound to five different amino acids (BODIPY-FAA) (glycine, alanine, leucine, phenylalanine, and tyrosine) (amino group is kept protected with fluorophore Fmoc) and evaluated these conjugates in terms of (i) their photophysical properties and (ii) their potential application as cell staining agents of suspension and adherent cells at healthy and stress conditions. In general, all synthesized BODIPY-FAA (3a-3e) were found to emit fluorescence in the blue and green regions of the spectrum (depending on the solvent conditions). However, BODIPY-FTyr(trt) (3e) showed the best molar extinction coefficient (ε = 28,198 M-1 cm-1) and quantum yield (Φ = 0.17). Biologically speaking, all synthesized conjugates demonstrated a selective affinity for the cytoplasm of Langerhans β-cells employed as a model, being the BODIPY-FLeu conjugate the one displaying the highest observed intensity. As such, our results reveal the BODIPY-FAA as a novel attractive tool for the specific staining of the cell cytoplasm, demonstrating not only a dual fluorescence emission but also a sensing capability to recognize different cell states.

Resumo em Inglês:

This study proposes a new, efficient, and selective method for the analysis of cocaine in oral fluid. For this purpose, an extractive phase with restricted access materials (RAM) capable of extract and pre-concentrate low molecular weight analytes and simultaneously exclude macromolecules was developed for disposable pipette extraction (DPX) followed by liquid chromatography coupled to mass spectrometry (LC-MS) analyses. The proposed method was optimized using a 24 factorial design which pointed higher extraction efficiency under the following conditions: pH 9, 10 cycles of extraction (aspirate/dispense), 3 cycles of desorption (aspirate/dispense) and acetonitrile as desorption solvent. The DPX-RAM/LC-MS method showed linearity range from 10 to 100 ng mL-1 with determination coefficient (R2) = 0.999, accuracy values ranged from -0.9 to 4.3%, precision values ranged from 1.7 to 9.1% and recovery values ranged from 97.9 to 101.1%. The benefits of this method are that it can be performed in few minutes and that the analytical performances, including the limit of detection (3.13 ng mL-1), limit of quantitation (10 ng mL-1) and linear range were found to be in agreement with other methods used for similar analysis.

Resumo em Inglês:

In this study, a coal fly ash material generated in a Portuguese coal thermal powerplant was tested as a low-cost adsorbent to remove dye molecules. Pre-treatment of the coal fly ash samples was not performed in order to reduce end use cost. Physical and chemical characterization revealed their inert nature and low effects lixiviation in aqueous media. Preliminary adsorption studies include adsorbent quantity, and adsorption kinetics. The adsorption studies focused on Mordant Orange 1 (Mo1) dye, but two other molecules, Rhodamine B (RhB) and Methylene Blue (MeB) were also included for comparison reasons. The adsorption isotherms were tested with different models including Langmuir, Freundlich and modified Langmuir-Freundlich. The effect of temperature, pH and unburn carbon in the adsorption process were also studied. The results show that adsorption capacity of the coal fly ash occurs mainly due to electroestatic interactions between the adsorbent surface and the adsorbate, which depends on the pH of the aqueous media and the surface chemistry of the material, quantified by the point of zero charge, pHpzc. These joint effects are responsible for the higher retention of Mo1 that is about 16 times higher, when compared to the other two molecules tested.

Resumo em Inglês:

Establishment of the radial distribution function by solving the Ornstein-Zernike equation is still an important problem, even more than a hundred years after the original paper publication. New strategies and approximations are common in the literature. A crucial step in this process consists in defining a closure relation which retrieves correlation functions in agreement with experiments or molecular simulations. In this paper, the functional Taylor expansion, as proposed by J. K. Percus, is applied to introduce two new closure relations: one that modifies the Percus Yevick closure relation and another one modifying the Hypernetted-Chain approximation. These new approximations will be applied to a hard sphere system. An improvement for the radial distribution function is observed in both cases. For some densities a greater accuracy, by a factor of five times compared to the original approximations, was obtained.

Resumo em Inglês:

The degradation of bisphenol A (BPA) by Fe3O4/persulfate system was investigated in aqueous solution. The influences of the initial concentrations of Fe3O4, persulfate (PS) and BPA, pH value, and initial reaction temperature on BPA removal were studied. The radical species was investigated by adding excessive dose of scavenger (methanol (MeOH) and tert-butanol (TBA)) into Fe3O4/PS system for the purpose of radical scavenging. The degradation products of BPA were detected by gas chromatography-mass spectrometry (GC-MS). The recyclability of Fe3O4 was also evaluated. The BPA removal rate of 80.7% was achieved under the following conditions: [BPA]0 = 1 mg L-1, [PS]0 = 0.2 mM, [Fe3O4]0 = 0.1 g L-1, T0 = 20 ± 1 ºC, pH0 = 6.8 ± 0.2. The results confirmed that the main free radicals in the reaction process were sulfate radicals, followed by hydroxyl radicals. Some intermediate products of BPA degradation, such as phenols, benzoquinones and benzoic acid were identified by GC-MS.