Abstract
The current paper aimed to model failures and fractures in single-lap bolted joints of woven fabric kenaf fiber reinforced polymer (KFRP) composite plate to fail in net-tension. The approach was based on the assumptions that micro-damage events were densely concentrated ahead of the notch tip and crack growth were readily seen along net-tension plane in a self-similar fashion. A 3-D finite element modelling framework were developed to explicitly incorporate bolt clamp-up in a range of KFRP series following tested experimental datasets. Lay-up types, normalized W/d, temperature exposure with constant bolt torque of 5 Nm were considered. It was found that KFRP plates under elevated temperature were stronger than under room temperature due to matrix toughening. Traction-separation relationship was incorported within Extended Finite Element Method (XFEM) framework to model damage within KFRP composite plate by using independent experimental datasets, here incorporates un-notched plate strength, σ o and fracture toughness, G c of all testing lay-ups. Constitutive model used is associated with stress concentration, therefore good agreement between predicted and experimental bearing stress at failure with net-tension failure mode is perhaps not suprising.
Keywords:
Textiles; Fracture; Finite element analysis (FEA); XFEM, Single-Lap Joints
