Evaluation of X22CrMoV12-1 Alloy with Vanadium Carbide Addition Submitted to Powder Metallurgy

Abstract

Usually, scraps of X22CrMoV12-1 alloy are obtained through machining of steam turbine blades and recycled through casting. However, this process is considered too costly. The viability of recycling X22CrMoV12-1 scraps with addition of vanadium carbide (VC) through powder metallurgy was analyzed in this study. Scraps of X22CrMoV12-1 alloy with VC were milled in a planetary ball mill during 10, 30 and 60 hours. The granulometry of the powder was determined through laser granulometry. The evolution in particles morphology and amorphization was conducted using scanning electron microscope (SEM) and x-ray diffraction (DRX) techniques. Stress-strain curves were obtained through compressive strength test. The results indicated that the best milling condition found was 60 hours. Also, the X22CrMoV12-1 alloy with VC addition produced by powder metallurgy showed good mechanical strength. Thus, this route was considered promising to reshape this material with smaller energy involved in the process.

Keywords:
X22CrMoV12-1 Alloy; Carbides; High Energy Ball Milling; Powder Metallurgy; Microstructural and Mechanical Analysis