Novel Colloidal Silica Technology For In Situ Spinelization in MgO-Containing Refractories

This study used an aqueous dispersion of silanized colloidal silica (SCS), whose particles’ surfaces were modified with an epoxysilane-based coupling agent, as the liquid medium and binder for MgO-Al₂O₃-containing suspensions. Fine calcined alumina and magnesia sinter particles were dispersed in SCS to form a 65 vol% solids suspension. Equivalent silica-free compositions containing calcium aluminate cement or unsilanized colloidal silica were tested as references. After mixing, the SCS-suspension showed low viscosity and suitable workability and, after curing, a thin protective coating of magnesium silicate hydrate (MSH) was formed, thus preventing MgO hydroxylation and improving bonding strength, generating green-dried structures of significant flexural strength (8 MPa). During initial heating, the decomposition of MSH and the softening of amorphous silica particles reduced the overall expansion of spinel (MgAl₂O₄) formation. After sintering at 1600ºC, the structure showed intense densification (total porosity of 8%) high flexural strength (73 MPa) and large spinel crystals surrounded by a thin layer of amorphous silica and magnesium silicates.

Keywords:
Magnesia sinter; in situ spinel; silanized colloidal silica