Characterization of the curing agents used in epoxy resins with TG/FT-IR technique

Samples of epoxy resin (EP) based on the diglycidyl ether of bisphenol A (DGEBA), cured with nadic methyl anhydride (NMA) and mercaptan (CAPCURE 3-800), or amine-phenol (CAPCURE EH-30), respectively, SE 4 and SE 5, were prepared in the stoichiometric ratio determined by the supplier. The curing behaviour of the epoxy systems SE 4 and SE 5 was followed by DSC (Differential Scanning Calorimetry). These SE and their ingredients were analyzed using FTIR transmission techniques (KBr pellets, pyrolysis without control and controlled pyrolysis-FT-IR, the CONTROLPIR/FT-IR) for characterizing the curing agents (CA). The temperature range used for samples pyrolysis was found from TG (thermogravimetry). Thus, the FT-IR bands of liquid pyrolysate obtained by CONTROLPIR/FT-IR were evaluated, in comparison to the reference spectrum of CA. The characterization of CA was also possible, by the analysis of such SE with the TG/FT-IR technique.

Epoxy resins; curing agents; TG/FT-IR technique; controlled pyrolysis-FT-IR


Associação Brasileira de Polímeros Rua São Paulo, 994, Caixa postal 490, São Carlos-SP, Tel./Fax: +55 16 3374-3949 - São Carlos - SP - Brazil
E-mail: revista@abpol.org.br