The method to determine tannins by radial diffusion developed by Hagerman (1987) has been explicitly used in herbal laboratories mainly because of its simplicity to implement, speed and low cost; yet, there are no reports in the literature on the submission of this method to a validation study. Based on this fact, this study sought to validate the method of Radial Diffusion in the tannin determination. All mandatory parameters required by ANVISA were evaluated. The method was considered linear and with high sensitivity quantitation (27.72 µg / well). It also showed robust and acceptable recovery (85.96%). The results obtained for repeatability (within-run) and intermediate precision (inter-run) certified the accuracy of the method, obtaining values between 1.89 and 7.03%. For accuracy, values between 100.47 and 105.26% were obtained, which is within the limits recommended by ANVISA. Thus, the method was considered as precise, accurate and reproducible, and is easy to perform and inexpensive.
radial diffusion; tannin content; method validation; quantification